76.2mm Si基AlGaN/GaN HEMT

<正>南京电子器件研究所采用含有双AlGaN过渡层的材料结构在76.2 mm(3英寸)Si衬底上外延生长了厚度超过2μm的AlGaN/GaN HEMT材料(图1),材料表面光滑、无裂纹。通过外延材料结构和生长条     

RF-MBE生长的高Al势垒层AlGaN/GaN HEMT结构

采用RF-MBE技术,在蓝宝石衬底上生长了高Al组分势垒层AlGaN/GaN HEMT结构.用三晶X射线衍射分析得到AlGaN势垒层的Al组分约为43%,异质结构晶体质量较高,界面比较光滑.变温霍尔测量显示此结构具有良好的电学性能,室温时电子迁移率和电子浓度分别高达1246cm2/(V·s)和1.429×1013cm-2,二者的乘积为1.8×1016V-1·s-1.用此材料研制的器件,直流特性得到了提高,最大漏极输出电流为1.0A/mm,非本征跨导为218mS/mm.结果表明,提高AlGaN势垒层Al的组分有助于提高AlGaN/GaN HEMT结构材料的电学性能和器件性能.     

应用于大功率MMIC开关的AlGaN背势垒GaN HEMT

报道了应用于大功率开关的AlGaN背势垒0.25μm GaN HEMT。通过引入AlGaN背势垒,MOCVD淀积在3英寸SiC衬底上的AlGaN/GaN异质结材料缓冲层的击穿电压获得了大幅度的提升,相比于普通GaN缓冲层和掺Fe GaN缓冲层击穿电压提升幅度分别为4倍和2倍。采用具有AlGaN背势垒AlGaN/GaN 外延材料研制的GaN HEMT开关管在源漏间距为2μm、2.5μm、3μm、3.5μm和4μm时,估算得到的关态功率承受能力分别为25.0W、46.2W、64.0W、79.2W和88.4W。基于源漏间距为2.5μm的GaN HEMT开关管设计了DC-12GHz的单刀双掷MMIC开关。该开关采用了反射式串-并-并结构,整个带内插入损耗最大1.0dB、隔离度最小30dB,10GHz下连续波测试得到其功率承受能力达44.1dBm。     

导致 AlGaN/GaN HEMT电学性能失效的内外因素

本文研究了不同偏置条件对AlGaN/GaN HEMT电学性能的影响。电场被认为是导致AlGaN/GaN HEMT器件电学性能退化的外因,陷阱则是内因。AlGaN/GaN HEMT器件的退化有两部分组成：可恢复退化与不可恢复退化。AlGaN/GaN HEMT器件中原本存在的陷阱与新产生的陷阱导致可恢复退化。     

SiC衬底AlGaN/GaN HEMT的ICP通孔刻蚀

利用ICP对研制的SiC衬底上AlGaN/GaN HEMT刻蚀获得了深度为50μm的接地通孔. 器件通孔制作前首先用机械研磨的方法将衬底减薄至50μm,在背面蒸发Ti/Ni并电镀Ni至3μm作为刻蚀阻挡层;之后利用SF6/O2混合气体的电感耦合等离子体对SiC衬底进行了刻蚀;最后将Cl2和BCl3混合气体的ICP刻蚀技术运用于AlGaN/GaN外延材料的刻蚀,完成了深度为50μm的AlGaN/GaN HEMT通孔制作,通孔侧壁具有一定的斜率,适合良好的金属覆盖以形成器件正面和背面的连接. 这一技术非常适合AlGaN/GaN HEMT及其单片集成电路的研制.     

SiC衬底AlGaN/GaN HEMT的ICP通孔刻蚀

利用ICP对研制的SiC衬底上AlGaN/GaN HEMT刻蚀获得了深度为50μm的接地通孔.器件通孔制作前首先用机械研磨的方法将衬底减薄至50μm,在背面蒸发Ti/Ni并电镀Ni至3μm作为刻蚀阻挡层;之后利用SF6/O2混合气体的电感耦合等离子体对SiC衬底进行了刻蚀;最后将Cl2和BCl3混合气体的ICP刻蚀技术运用于AlGaN/GaN外延材料的刻蚀,完成了深度为50μm的AlGaN/GaN HEMT通孔制作,通孔侧壁具有一定的斜率,适合良好的金属覆盖以形成器件正面和背面的连接.这一技术非常适合AlGaN/GaN HEMT及其单片集成电路的研制.     

Ka波段AlGaN/GaN HEMT的研制

为了提高AlGaN/GaN HEMT的频率,采用了缩小源漏间距、优化栅结构和外围结构等措施设计了器件结构,并基于国内的GaN外延片和工艺完成了器件制备.测试表明所研制的AlGaN/GaN HEMT可以满足Ka波段应用.其中2×75μm栅宽AlGaN/GaN HEMT在30V漏压下的截止频率为32GHz,最大振荡频率为1...     

4W/mm蓝宝石衬底AlGaN/GaN HEMT

报道了利用南京电子器件研究所生长的蓝宝石衬底AlGaN/GaN异质结材料制作的HEMT,器件功率输出密度达4W/mm。通过材料结构及生长条件的优化,利用MOCVD技术获得了二维电子气(2DEG)面密度为0.97×1013cm-2、迁移率为1000cm2/Vs的AlGaN/GaN异质结构材料,用此材料完成了栅长1μm、栅宽200μm AlGaN/GaN HEMT器件的研制。小信号测试表明器件的fT为17GHz、最高振荡频率fmax为40GHz;负载牵引测试得到2GHz下器件的饱和输出功率密度为4.04W/mm。     

具有高击穿电压的AlN背势垒AlGaN/GaN/AlN HEMT材料

采用金属有机化学气相沉积(MOCVD)技术在4英寸(1英寸=2.54 cm)蓝宝石衬底上制备了1.2μm厚的AlN背势垒的AlGaN/GaN/AlN双异质结高电子迁移率晶体管(HEMT)材料,其AlGaN势垒层表面粗糙度(RMS)、二维电子气(2DEG)迁移率以及HEMT材料的弯曲度都较为接近于常规的高阻GaN背势垒结构的HEMT材料。由于AlN晶格常数较小,具有AlN背势垒的HEMT材料受到了更大的压应力。通过对比分析两种HEMT材料所制备的器件发现,受益于AlN背势垒层更高的禁带宽度和临界电场,由AlN背势垒HEMT材料所制备的器件三端关态击穿电压为常规高阻GaN背势垒HEMT器件的1.5倍,缓冲层漏电流则较常规高阻GaN背势垒HEMT器件低2～3个数量级。     

蓝宝石上高电子迁移率AlGaN/GaN材料的研究

通过优化蓝宝石衬底上GaN材料缓冲层和Mg掺杂生长工艺,获得了高质量的半绝缘GaN缓冲层,同时通过优化AlGaN/GaN异质结材料中AlN插入层的厚度,获得了性能优良的AlGaN/GaN HEMT材料.室温下2DEG载流子面密度为1.21×10013/cm2,迁移率为1970 cm2/V·s,77 K下2DEG迁移率达到13000 cm2/V·s.     

Flat GaN epitaxial layers grown on Si(111) by metalorganic vapor phase epitaxy using step-graded AlGaN intermediate layers

In this work, we report on the growth by metalorganic vapor phase epitaxy (MOVPE) of GaN layers on AlN/Si(111) templates with step-graded AlGaN intermediate layers. First, we will discuss the optimization of the AlN/Si(111) templates and then we will discuss the incorporation of step-graded AlGaN intermediate layers. It is found that the growth stress in GaN on high-temperature (HT) AlN/Si(111) templates is compressive, although, due to relaxation, the stress we have measured is much lower than the theoretical value. In order to prevent the stress relaxation, step-graded AlGaN layers are introduced and a crack-free GaN epitaxial layer of thickness >1 μm is demonstrated. Under optimized growth conditions, the total layer stack, exceeding 2 μm in total, is kept under compressive stress, and the radius of the convex wafer bowing is as large as 119 m. The crystalline quality of the GaN layers is examined by high-resolution x-ray diffraction (HR-XRD), and the full-width-at-half maximums (FWHMs) of the x-ray rocking curve (0002) ω-scan and (−1015) ω-scan are 790 arc sec and 730 arc sec, respectively. It is found by cross-sectional transmission electron microscopy (TEM) that the step-graded AlGaN layers terminate or bend the dislocations at the interfaces.     

Improvement of Breakdown Characteristics of a GaN HEMT with AlGaN Buffer Layer

High-electron-mobility transistors (HEMTs) with a highly resistive two-layer buffer layer (AlGaN/GaN) were grown on 6H-SiC substrates by metalorganic chemical vapor deposition. The characteristics were compared with those of conventional HEMTs utilizing GaN as the high-resistivity buffer. The results of x-ray diffraction and atomic force microscopy indicate that the crystal quality of the HEMT heterostructure is not deteriorated by the AlGaN buffer layer. The direct-current (DC) characteristics of the HEMTs with the two different structures are similar, while the off-state breakdown voltage is enhanced and the mobility of the two-dimensional electron gas is improved by the AlGaN buffer layer. The reasons for the effects of the AlGaN buffer layer are discussed systematically.     

Influence of annealed ohmic contact metals on electron mobility of strained AlGaN/GaN heterostructures

The influence of annealed ohmic contact metals on the electron mobility of a two dimensional electron gas (2DEG) is investigated on ungated AlGaN/GaN heterostructures and AlGaN/GaN heterostructure field effect transistors (AlGaN/GaN HFETs). Current-voltage (I-V) characteristics for ungated AlGaN/GaN heterostructures and capacitance-voltage (C-V) characteristics for AlGaN/GaN HFETs are obtained, and the electron mobility for the ungated AlGaN/GaN heterostructure is calculated. It is found that the electron mobility of the 2DEG for the ungated AlGaN/GaN heterostructure is decreased by more than 50% compared with the electron mobility of Hall measurements. We propose that defects are introduced into the AlGaN barrier layer and the strain of the AlGaN barrier layer is changed during the annealing process of the source and drain, causing the decrease in the electron mobility.     

AlN阻挡层对AlGaN/GaNHEMT器件的影响

利用低压MOCVD技术在蓝宝石衬底上生长了AlGaN/GaN异质结和AlGaN/AlN/GaN异质结二维电子气材料,采用相同器件工艺制造出了AlGaN/GaN HEMT器件和AlGaN/AlN/GaN HEMT器件.通过对两种不同器件的比较和讨论,研究了AlN阻挡层的增加对AlGaN/GaN HEMT器件性能的影响.     

蓝宝石衬底上AlGaN/GaN HEMT自热效应研究

建立了包含“自热效应”的A lG aN/G aN HEM T(高电子迁移率晶体管)直流I-V特性解析模型。从理论的角度分析了自热效应对A lG aN/G aN HEM T器件的影响,并同已有的实验结果进行了对比,符合较好。证明基于这种模型的理论分析适于A lG aN/G aN HEM T器件测试及应用的实际情况。     

The Effect of an Fe-doped GaN Buffer on off-State Breakdown Characteristics in AlGaN/GaN HEMTs on Si Substrate

An Fe-doped GaN buffer layer was employed in the growth of AlGaN/GaN high-electron mobility transistors (HEMTs) on Si substrates. In order to investigate the effects of an Fe-doped GaN buffer on OFF-state breakdown characteristics, HEMT devices with an Fe-doped GaN buffer on Si substrates were fabricated along with conventional devices utilizing an unintentionally doped GaN buffer on Si substrates. The device characteristics were compared. While HEMT devices with the conventional structure showed an extremely unstable OFF-state breakdown behavior due to punchthrough to the Si substrate, it was demonstrated that an Fe-doped GaN buffer layer on a Si substrate successfully suppressed the premature failure caused by Si-induced breakdown. As a result, the AlGaN/GaN HEMTs with an Fe-doped GaN buffer on Si substrates exhibited much more consistent and enhanced breakdown voltages, when compared with the conventional devices. Consequently, it is highly desirable that AlGaN/GaN HEMTs on Si substrates have an Fe-doped GaN buffer layer in order to achieve stable and robust OFF-state breakdown characteristics     

Investigation of Self-Heating Effects in Submicrometer GaN/AlGaN HEMTs Using an Electrothermal Monte Carlo Method

An electrothermal Monte Carlo (MC) method is applied in this paper to investigate electron transport in submicrometer wurtzite GaN/AlGaN high-electron mobility transistors (HEMTs) grown on various substrate materials including SiC, Si, GaN, and sapphire. The simulation method is an iterative technique that alternately runs an MC electronic simulation and solves the heat diffusion equation using an analytical thermal resistance matrix method. Results demonstrate how the extent of the thermal droop in the I_d-V_ds characteristics and the device peak temperature depend upon both the biasing conditions and the substrate material type. Polarization effects are considered in the simulations, as they greatly influence electron transport in GaN/AlGaN HEMTs by creating a highly concentrated two-dimensional electron gas (2DEG) at the GaN/AlGaN interface. It is shown that a higher 2DEG density provides the devices with a better current handling capability but also increases the importance of the thermal effects     

Thermal effects in AlGaN/GaN/Si high electron mobility transistors

Group III-nitride compounds are of increasing interest for designing high power and high temperature transistors. A considerable progress in the growth and process technology of these devices has been achieved. However, there are still limitations concerning particularly the lack of native substrates. Comparison of the AlGaN/GaN high electron mobility transistors investigated favours the SiC substrate. Recently, encouraging results have been reported for AlGaN/GaN/Si. The crucial problem found in AlGaN/GaN transistors operating at high biases is the self-heating induced by high power dissipation in the active zone. The present work reports on a study of the self-heating in AlGaN/GaN HEMTs grown on Si(1 1 1). The electron-band parameters of the heterostructures have been calculated self-consistently by taking into account the piezoelectric and spontaneous polarizations. As an experiment support, direct-current characteristics of AlGaN/GaN/Si HEMTs have been used to derive the drain voltage-dependent temperature rise in the conductive channel. As has been found, the self-heating is relatively weak. An improvement in the electron transport is achieved by optimizing the epilayers and adjusting the electrode sizes at output of the transistors investigated.     

分子束外延AlGaN/GaN异质结场效应晶体管材料

用自组装的氨源分子束外延 (NH3-MBE)系统和射频等离子体辅助分子束外延 (PA-MBE)系统在 C面蓝宝石衬底上外延了优质 Ga N以及 Al Ga N/Ga N二维电子气材料。Ga N膜 (1 .2 μm厚 )室温电子迁移率达3 0 0 cm2 /V· s,背景电子浓度低至 2× 1 0 1 7cm- 3。双晶 X射线衍射 (0 0 0 2 )摇摆曲线半高宽为 6arcmin。 Al Ga N/Ga N二维电子气材料最高的室温和 77K二维电子气电子迁移率分别为 73 0 cm2 /V·s和 1 2 0 0 cm2 /V· s,相应的电子面密度分别是 7.6× 1 0 1 2 cm- 2和 7.1× 1 0 1 2 cm- 2 ;用所外延的 Al Ga N/Ga N二维电子气材料制备出了性能良好的 Al Ga N/Ga N HFET(异质结场效应晶体管 ) ,室温跨导为 5 0 m S/mm(栅长 1 μm) ,截止频率达 1 3 GHz(栅长 0 .5μm)。该器件在 3 0 0°C出现明显的并联电导 ,这可能是材料中的深中心在高温被激活所致