基于神经网络和粒子群算法的MC-CDMA多用户检测

MC-CDMA系统是干扰受限系统,存在多址干扰。本文提出一种基于神经网络和粒子群算法的MC-CDMA多用户检测方法。在粒子位置更新中,随机选择部分粒子作为Hopfield神经网络的神经元组成的个体,进行神经网络的更新;其他粒子仍采用原粒子群算法的位置更新策略,从而能加快粒子群算法的收敛速度以及降低计算复杂度。仿真表明在算法参数相同时,该多用户检测方法在误码率、收敛速度、系统容量、抗远近能力等方面都优于基于粒子群算法的多用户检测和基于神经网络的多用户检测,更加逼近于最佳多用户检测的性能。     

基于离散粒子群算法的CDMA多用户检测方法

研究了离散粒子群算法，并将其应用于CDMA多用户检测问题，提出一种基于离散粒子群优化算法的CDMA多用户检测的方法。该方法应用一种新的选择和分区搜索的策略，改进搜索的质量和效率。分析以及实验仿真表明该方法具有计算复杂度低且可以得到较好误码率性能的特点，为寻求新的多用户检测方法提供了思路。     

基于并行粒子群算法的解相关多用户检测

将“联姻”策略应用在粒子群算法中。提出一种并行粒子群算法（PPSO）。该算法可以有效地加强种群之间的联系，保证单个种群中的粒子在进化过程中的多样性，从而可获得更高效的搜索性能。分析了将并行粒子群算法应用于直接扩频CDMA解相关多用户检测的理论依据和实际性能。仿真结果证明该算法能够减小计算的复杂度，在抗多址干扰能力上比传统的匹配接收机和解相关接收机有显著的提高，与解相关接收机的抗远近能力相当，且比基于遗传算法的接收机具有更快的收敛速度。     

改进DPSO算法在干扰资源分配中的应用

引入改进的离散粒子群（DPSO）算法对干扰资源分配问题进行求解。针对干扰资源分配的数学模型,给出了具体的求解方案。在迭代过程中线性改变权重系数和认知参数,使粒子快速收敛;为避免粒子陷入局部最优,引入了一种粒子位置更新机制。仿真验证了该改进算法的有效性和可行性。     

继承优秀染色体片段的PSO算法求解TSP问题

粒子群优化算法(PSO)提出至今一直未能有效解决离散及组合优化问题,TSP问题是组合优化问题中一个典型的NP问题.文中参考了离散粒子群算法(DPSO)和遗传算法(GA)解决TSP问题的成功经验,提出了一种继承优秀染色体片段的PSO算法(ECFG-PSO).为避免早熟,在算法中加入了局部查找和二次初始化策略.实验证明ECFG-PSO算法解决TSP问题的效率和规模优于DPSO算法.     

基于免疫克隆量子算法的多用户检测器

为了解决CDMA系统最佳多用户检测的高计算复杂度问题,基于免疫克隆选择理论和新的遗传量子算法,该文提出了免疫克隆量子算法。该算法把根据神经网络制作的疫苗接种到克隆量子算法的每一代中,通过接种疫苗到CQA中,可以加快CQA的收敛速度减少计算复杂度。另外,CQA所提供的好的初值可以改善疫苗的性能,接种的疫苗还改善了CQA的性能,文中给出了在免疫克隆量子算法中使用随机神经网络制作疫苗的统一理论框架结构。仿真结果证明了该方法不仅能够快速收敛到全局最优解,并且无论抗多址干扰能力和抗远近效应能力都优于传统检测器和一些应用以前智能计算算法的多用户检测器。     

基于自适应人工鱼群算法的多用户检测器

将智能优化算法应用到多用户检测器(MUD)问题中,是近年来改善MUD性能的一个研究方向。人工鱼群算法(AFSA)是一种新的智能优化算法,该算法具有一些遗传算法和粒子群算法不具备的特点。但是用其解决离散优化问题时,该算法保持探索与开发平衡的能力较差,且在算法运行后期搜索的盲目性较大,从而影响了该算法搜索的质量和效率。为了克服这些缺点,本文对该算法进行了改进,得到两种自适应人工鱼群算法(AAFSA_FP和AAFSA_SP),并首次用其构建了新的多用户检测器。仿真结果表明,该方法与基于遗传算法的多用户检测器和基于粒子群算法的多用户检测器相比,在误码率、抗远近效应的能力和收敛速度等方面都有明显的改善。     

基于拟生态优化算法的CDMA多用户检测方法

拟生态优化算法是一类模拟自然生态系统运行机制,求解复杂优化问题的智能计算方法,其中的蚁群算法和粒子群算法是较新出现的两种具有不同特点的方法。该文研究基本蚁群算法和离散粒子群算法,并结合CDMA多用户检测问题,改变算法的搜索机制,提出两种CDMA多用户检测的方法。从理论分析以及实验仿真的角度对比两种方法,表明两种方法的计算复杂度低且可以得到较好误码率性能,同时又各有特点。     

CDMA系统粒子群多用户检测算法

Kennedy和Eberhart提出的粒子群优化算法(PSO),作为一种新的并行优化算法,在解决多维和非线性的复杂问题中,性能优良且算法简单易于实现。本文对二进制粒子群优化算法进行改进,并将其应用于DS-CDMA通信系统的多用户检测中,提出了基于矢量的二进制粒子群多用户检测器(V-BPSO-MUD),同时提出了两种高效实用的多用户检测器:基于矢量的串行二进制多用户检测器(VS-BPSO-MUD)及基于矩阵的二进制多用户检测器(M-BPSO-MUD)。仿真结果表明,PSO多用户检测器充分利用了粒子群优化算法的优良特性,性能明显优于传统的CDMA检测器,接近无多址干扰情况。     

基于Social Cognition粒子群算法多用户检测

最优多用户检测方法具有最优性能,但复杂度高,利用优化算法求解可以降低实现复杂度。粒子群算法是一种简单有效的新型群智能优化算法,研究了一种Socialcognition模型简化粒子群算法,并应用于大用户量CDMA多用户检测问题,主要考虑降低算法复杂度,提高算法的实现效率。分析及仿真表明该方法在系统用户数量较大时具有较好性能。     

Cost-effective test solutions for smart card and other integrated flash applications

From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.     

Theoretical analysis of the relationship between the Brillouin gain coefficient and the strain in the optical-fiber sensors

The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.     

Novel fiber-optical interferometer with miniaturized probe for in-hole measurements

Today, micro-system technology and the development of new MEMS （Micro-Electro-Mechanical Systems） are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.     

Curved crystal spectrometer for the measurement of X-ray lines from laser-produced plasmas

In order to diagnose the laser-produced plasmas, a focusing curved crystal spectrometer has been developed for measuring the X-ray lines radiated from a laser-produced plasmas. The design is based on the fact that the ray emitted from a source located at one focus of an ellipse will converge on the other focus by the reflection of the elliptical surface. The focal length and the eccentricity of the ellipse are 1350 mm and 0.9586, respectively. The spectrometer can be used to measure the X- ray lines in the wavelength range of 0.2-0.37 nm, and a LiF crystal （200） （2d = 0.4027 nm） is used as dispersive element covering Bragg angle from 30° to 67.5°. The spectrometer was tested on Shengnang- Ⅱ which can deliver laser energy of 60-80 J/pulse and the laser wavelength is 0.35 μm. Photographs of spectra including the 1 s2p ^1P1-1s^2 ^1S0 resonance line（w）, the 1s2p ^3P2-1s^2 1S0 magnetic quadrupole line（x）, the 1s2p ^3P1-1 s^2 ^1S0 intercombination lines（y）, the 1 s2p ^3S~1-1 s^2 ^1S0 forbidden line（z） in helium-like Ti Ⅹ Ⅺ and the 1 s2s2p ^2P3/2-1 s622s ^2S1/2 line（q） in lithium-like Ti Ⅹ Ⅹhave been recorded with a X-ray CCD camera. The experimental result shows that the wavelength resolution（λ/△ 2） is above 1000 and the elliptical crystal spectrometer is suitable for X-ray spectroscopy.     

Preparation and Characterization of TaN ALD Precursors

High purity organic-tantalum precursors for thin film ALD TaN were synthesized and characterized.Vapor pressure and thermal stability of these precursors were studied.From the vapor pressure analysis,it was found that TBTEMT has a higher vapor pressure than any other published liquid TaN precursor,including TBTDET,TAITMATA,and IPTDET.Thermal stability of the alkyl groups on the precursors was investigated using a 1H NMR technique.The results indicated that the tertbutylimino group is the most stable group on TBTDET and TBTEMT as compared to the dialkylamido groups.Thermal stability of TaN precursors decreased in the following order:TBTDET ＞ PDMAT ＞ TBTEMT.In conclusion,precursor vapor pressure and thermal stability were tuned by making slight variations in the ligand sphere around the metal center.     

Electronic Structure of Semiconductor Nanocrystals

This paper reviews our recent development of the use of the large-scale pseudopotential method to calculate the electronic structure of semiconductor nanocrystals, such as quantum dots and wires, which often contain tens of thousands of atoms. The calculated size-dependent exciton energies and absorption spectra of quantum dots and wires are in good agreement with experiments. We show that the electronic structure of a nanocrystal can be tuned not only by its size,but also by its shape. Finally,we show that defect properties in quantum dots can be significantly different from those in bulk semiconductors.     

Teleportation of an arbitrary unknown N-qubit entangled state under the controlling of M controllers

A new quantum protocol to teleport an arbitrary unknown N-qubit entangled state from a sender to a fixed receiver under M controllers(M < N) is proposed. The quantum resources required are M non-maximally entangled Greenberger-Home-Zeilinger (GHZ) state and N-M non-maximally entangled Einstein-Podolsky-Rosen (EPR) pairs. The sender performs N generalized Bell-state measurements on the 2N particles. Controllers take M single-particle measurement along x-axis, and the receiver needs to introduce one auxiliary two-level particle to extract quantum information probabilistically with the fidelity unit if controllers cooperate with it.     

Diode-end-pumped Nd:YVO4/LBO lasers with 4.2W continuous-wave output at 457 nm

A continuous-wave (CW) 457 nm blue laser operating at the power of 4.2 W is demonstrated by using a fiber coupled laser diode module pumped Nd: YVO4 and using LBO as the intra-cavity SHG crystal With the optimization of laser cavity and crystal parameters, the laser operates at a very high efficiency. When the pumping power is about 31 W, the output at 457nm reaches 4.2 W, and the optical to optical conversion efficiency is about 13.5% accordingly. The stability of the out putpower is better than 1.2% for 8 h continuously working.     

Critical Stage Rule-Based Real Time Dispatch（RTD）System in Highly-Mixed-Products （HMP） FAB

An improving utilization and efficiency of critical equipments in semiconductor wafer fabrication facilities are concerned. Semiconductor manufacturing FAB is one of the most complicated and cost sensitive environments. A good dispatching tool will make big difference in equipment utilization and FAB output as a whole. The equipment in this paper is In-Line DUV Scanner. There are many factors impacting utilization and output on this equipment group. In HMP environment one of the issues is changing of reticule in this area and idle counts due to load unbalance between equipments. Here we'll introduce a rule-based RTD system which aiming at decreasing the number of recipe change and idle counts among a group of scanner equipment in a high-mixed-products FAB.