Effects of seasonal hydrologic patterns in south Florida wetlands on radar backscatter measured from ERS-2 SAR imagery

A multi-year study was carried out to evaluate ERS synthetic aperture radar (SAR) imagery for monitoring surface hydrologic conditions in wetlands of southern Florida. Surface conditions (water level, aboveground biomass, soil moisture) were measured in 13 study sites (representing three major wetland types) over a 25-month period. ERS SAR imagery was collected over these sites on 22 different occasions and correlated with the surface observations. The results show wide variation in ERS backscatter in individual sites when they were flooded and non-flooded. The range (minimum vs. maximum) in SAR backscatter for the sites when they were flooded was between 2.3 and 8.9 dB, and between 5.0 and 9.0 dB when they were not flooded. Variations in backscatter in the non-flooded sites were consistent with theoretical scattering models for the most part. Backscatter was positively correlated to field measurements of soil moisture. The MIchigan MIcrowave Canopy Scattering (MIMICS) model predicts that backscatter should decrease sharply when a site becomes inundated, but the data show that this drop is only 1-2 dB. This decrease was observed in both non-wooded and wooded sites. The drop in backscatter as water depth increases predicted by MIMICS was observed in the non-wooded wetland sites, and a similar decrease was observed in wooded wetlands as well. Finally, the sensitivity of backscatter and attenuation to variations in aboveground biomass predicted by MIMICS was not observed in the data.The results show that the inter- and intra-annual variations in ERS SAR image intensity in the study region are the result of changes in soil moisture and degree of inundation in the sites. The correlation between changes in SAR backscatter and water depth indicates the potential for using spaceborne SAR systems, such as the ERS for monitoring variations in flooding in south Florida wetlands.     

Assessment of C-band synthetic aperture radar data for mapping and monitoring Coastal Plain forested wetlands in the Mid-Atlantic Region,U.S.A.

Multi-temporal C-band SAR data (C-HH and C-VV), collected by ERS-2 and ENVISAT satellite systems, are compared with field observations of hydrology (i.e., inundation and soil moisture) and National Wetland Inventory maps (U.S. Fish and Wildlife Service) of a large forested wetland complex adjacent to the Patuxent and Middle Patuxent Rivers, tributaries of the Chesapeake Bay. Multi-temporal C-band SAR data were shown to be capable of mapping forested wetlands and monitoring hydroperiod (i.e., temporal fluctuations in inundation and soil moisture) at the study site, and the discrimination of wetland from upland was improved with 10 m digital elevation data. Principal component analysis was used to summarize the multi-temporal SAR data sets and to isolate the dominant temporal trend in inundation and soil moisture (i.e., relative hydroperiod). Significant positive, linear correlations were found between the first principal component and percent area flooded and soil moisture. The correlation (r²) between the first principal component (PC1) of multi-temporal C-HH SAR data and average soil moisture was 0.88 (p = < .0001) during the leaf-off season and 0.87 (p = < .0001) during the leaf-on season, while the correlation between PC1 and average percent area inundated was 0.82 (p = < .0001) and 0.47 (p = .0016) during the leaf-off and leaf-on seasons, respectively. When compared to field data, the SAR forested wetland maps identified areas that were flooded for 25% of the time with 63–96% agreement and areas flooded for 5% of the time with 44–89% agreement, depending on polarization and time of year. The results are encouraging and justify further studies to attempt to quantify the relative SAR-derived hydroperiod classes in terms of physical variables and also to test the application of SAR data to more diverse landscapes at a broader scale. The present evidence suggests that the SAR data will significantly improve routine wooded wetland mapping.     

Topographically based spatially averaging of SAR data improves performance of soil moisture models

Spatial averaging schemes have often been used to improve empirical models that relate radar backscatter coefficient to soil moisture. However, reducing the noise in backscatter response not related to soil moisture often results in signal losses that are related to soil moisture. In this study we tested whether a spatial averaging scheme based on topographic features improved regressions relating backscatter coefficient and soil moisture on the low relief landscape of the Prairie Pothole Region of Canada. Soil moisture data were collected along hillslope transects within pothole drainage basins at intervals coincident with RADARSAT-1 satellite overpass. Spatial averaging schemes were designed at four scales: pixel, topographic feature (uplands, sideslopes, and lowlands), pothole drainage basin, and landscape (0.8 km × 1.6 km). The relationship between soil moisture and backscatter coefficient improved with increasing area of spatial averaging from a pixel (R² = 0.18, P < 0.005), to the pothole drainage basin (R² = 0.36, P < 0.005), to the landscape (R² = 0.66, P < 0.005). However, the strongest relationship (R² = 0.72, P < 0.005) was obtained by spatially averaging radar images based on topographic features. These findings indicate that topographically based spatial averaging of RADARSAT-1 imagery improves empirical models that are created to map the complex patterns of soil moisture in prairie pothole landscapes.     

Soil moisture estimation in a semiarid rangeland using ERS-2 and TM imagery

Soil moisture is important information in semiarid rangelands where vegetation growth is heavily dependent on the water availability. Although many studies have been conducted to estimate moisture in bare soil fields with Synthetic Aperture Radar (SAR) imagery, little success has been achieved in vegetated areas. The purpose of this study is to extract soil moisture in sparsely to moderately vegetated rangeland surfaces with ERS-2/TM synergy. We developed an approach to first reduce the surface roughness effect by using the temporal differential backscatter coefficient (Δσ_wet-dry⁰). Then an optical/microwave synergistic model was built to simulate the relationship among soil moisture, Normalized Difference Vegetation Index (NDVI) and Δσ_wet-dry⁰. With NDVI calculated from TM imagery in wet seasons and Δσ_wet-dry⁰ from ERS-2 imagery in wet and dry seasons, we derived the soil moisture maps over desert grass and shrub areas in wet seasons. The results showed that in the semiarid rangeland, radar backscatter was positively correlated to NDVI when soil was dry (m_v<10%), and negatively correlated to NDVI when soil moisture was higher (m_v>10%). The approach developed in this study is valid for sparse to moderate vegetated areas. When the vegetation density is higher (NDVI>0.45), the SAR backscatter is mainly from vegetation layer and therefore the soil moisture estimation is not possible in this study.     

Comparison of MODIS, eddy covariance determined and physiologically modelled gross primary production (GPP) in a Douglas-fir forest stand

Quantification of the magnitude of net terrestrial carbon (C) uptake, and how it varies inter-annually, is an important question with future potential sequestration influenced by both increased atmospheric CO₂ and changing climate. However the assessment of differences in measured and modeled C accumulation is a challenging task due to the significant fine scale variation occurring in terrestrial productivity due to soil, climate and vegetation characteristics as well as difficulties in measuring carbon accumulation over large spatial areas. The Moderate Resolution Imaging Spectroradiometer (MODIS) offers a means of monitoring gross primary production (GPP), both spatially and temporally, routinely from space. However it is critical to compare and contrast the temporal dynamics of the C and water fluxes with those measured from ground-based networks, or estimated using physiological models. In this paper, using a number of approaches, our objective is to determine if any systematic biases exists in either the MODIS, or the modeled estimates of fluxes, relative to the measurements made over an evergreen, needleleaf temperate rainforest on Vancouver Island, Canada. Results indicate that 8-day GPP as predicted with a simple physiological model (3PGS), forced using local meteorology and canopy characteristics, matched measured fluxes very well (r² = 0.86, p < 0.001) with no significant difference between eddy covariance (EC) and modeled GPP (p < 0.001). In addition, modeled water supply closely matched measured relative available soil water content at the site. Using canopy characteristics from the MODIS fraction of photosynthetically active radiation (fPAR) algorithm, slightly reduced the correspondence of the predictions due to a large number of unsuccessful retrievals (83%) due to sun angle, snow and cloud. Predictions of GPP based on the MODIS GPP algorithm, forced using local meteorology and canopy characteristics, were also highly correlated with EC measurements (r² = 0.89, p < 0.001) however these estimates were biased under predicting GPP. Estimates of GPP based on the most recent MODIS reprocessing (collection 4.5) remained highly correlated (r² = 0.88, p < 0.001) yet were also the most biased with the estimates being 30% less than the EC-measured GPP. Most of the variance in GPP at the site was explained by the absorbed photosynthetically active radiation. We also compared the nighttime respiration as measured over 2 years at the site with the minimum 8-day MODIS land surface temperature and found a significant relationship (r² = 0.57), similar to other studies.     

Soil moisture limitations on monitoring boreal forest regrowth using spaceborne L-band SAR data

A study was carried out to investigate the utility of L-band SAR data for estimating aboveground biomass in sites with low levels of vegetation regrowth. Data to estimate biomass were collected from 59 sites located in fire-disturbed black spruce forests in interior Alaska. PALSAR L-band data (HH and HV polarizations) collected on two dates in the summer/fall of 2007 and one date in the summer of 2009 were used. Significant linear correlations were found between the log of aboveground biomass (range of 0.02 to 22.2 t ha^-1) and σ° (L-HH) and σ° (L-HV) for the data collected on each of the three dates, with the highest correlation found using the L-HV data collected when soil moisture was highest. Soil moisture, however, did change the correlations between L-band σ° and aboveground biomass, and the analyses suggest that the influence of soil moisture is biomass dependent. The results indicate that to use L-band SAR data for mapping aboveground biomass and monitoring forest regrowth will require development of approaches to account for the influence that variations in soil moisture have on L-band microwave backscatter, which can be particularly strong when low levels of aboveground biomass occur.     

Investigating the potential for soil moisture and surface roughness monitoring in drylands using ERS SAR data

Multitemporal ERS-1 and ERS-2 SAR data were acquired for northern Jordan between 1995 and 1997 to investigate changes in the backscatter coefficients of a range of typical desert land surfaces. The changes in backscatter found were ascribed to variations in surface soil moisture, and changes in surface roughness caused by a range of natural and anthropogenic factors. Data collected from monitored sites were input into the Integral Equation Model (IEM). The model outputs were strongly correlated with observed backscatter coefficients (r ²=0.84). The results show that the successful monitoring of soil moisture in these environments is strongly dependent on the surface roughness. On surfaces with RMS height 0.5 cm, the sensitivity of the backscatter coefficient to changes in surface microtopography did not allow accurate soil moisture estimation. Microtopographic change on rougher surfaces has less influence on the backscatter coefficient, and the probability of soil moisture estimation from SAR imagery is greater. These results indicate that knowledge of the surface conditions (both in terms of surface roughness and geomorphology) is essential for accurate soil moisture monitoring, whether in a research or operational context. The potential benefits of these findings are discussed in the context of the Jordan Badia Research and Development Project.     

Assessing spatial and temporal variations in surface soil moisture in fire-disturbed black spruce forests in Interior Alaska using spaceborne synthetic aperture radar imagery — Implications for post-fire tree recruitment

Recent studies [Bourgeau-Chavez, L.L., Kasischke, E.S., Riordan, K., Brunzell, S.M., Nolan, M., Hyer, E.J., Slawski, J.J., Medvecz, M., Walters, T., and Ames, S. (in press). Remote monitoring of spatial and temporal surface soil moisture in fire disturbed boreal forest ecosystems with ERS SAR imagery. Int. J. Rem. Sens.] demonstrated that ERS SAR imagery can be used to estimate surface soil moisture in recently burned black spruce forests in interior Alaska. We used this relationship to analyze the intra- and inter-annual variations surface soil moisture in two burned black spruce forests in Alaska. The results of this study showed distinct seasonal and longer-term trends in soil moisture in the two sites, with the site that burned in 1994 having higher soil moisture than the site that burned in 1999. The differences in soil moisture between the sites were related to landscape-scale variations in soil drainage and seasonal permafrost thawing. Finally, we found that the 1999 site had dramatically lower levels of tree recruitment (both aspen and black spruce) than the 1994 site as a result of the lower soil moisture levels. These results show that the ERS SAR and similar systems can be used to monitor a site characteristic that is important to understanding changes in the ecosystem community structure that result from variations in climate and the fire regime in the boreal region.     

Absorption,dissociation, locus of control and presence in virtual reality

The present study aimed to explore the relationship between a number of psychological variables and a reported sense of presence in immersive virtual reality (IVR). It was hypothesised that participants’ scores on measures of absorption, dissociation, and external locus of control would be positively and significantly correlated with a measure of their sense of presence in IVR. A total of 64 people took part. Significant correlations were found between presence and dissociation (r = 0.403, p < 0.01), and presence and locus of control (r = 0.268, p < 0.05). However, the correlation between presence and absorption was not significant (r = −0.037, p = 0.386). The findings reported here suggest a complex interrelationship of psychological variables in relation to presence in IVR that warrants further research.     

ASCAT soil wetness index validation through in situ and modeled soil moisture data in central Italy

Reliable measurements of soil moisture at global scale might greatly improve many practical issues in hydrology, meteorology, climatology or agriculture such as water management, quantitative precipitation forecasting, irrigation scheduling, etc. Remote sensing offers the unique capability to monitor soil moisture over large areas but, nowadays, the spatio-temporal resolution and accuracy required for some hydrological applications (e.g., flood forecasting in medium to large basins) have still to be met. The Advanced SCATterometer (ASCAT) onboard the Metop satellite (VV polarization, C-band at 5.255 GHz), based on a large extent on the heritage of the ERS scatterometer, provides a soil moisture product available at a coarse spatial resolution (25 km and 50 km) and at a nearly daily time step. This study evaluates the accuracy of the new 25 km ASCAT derived saturation degree product by using in situ observations and the outcomes of a soil water balance model for three sites located in an inland region of central Italy. The comparison is carried out for a 2-year period (2007-2008) and three products derived from ASCAT: the surface saturation degree, m_s, the exponentially filtered soil wetness index, SWI, and its linear transformation, SWI*, matching the range of variability of ground data. Overall, the performance of the three products is found to be quite good with correlation coefficients higher than 0.92 and 0.80 when the SWI is compared with in situ and simulated saturation degree, respectively. Considering SWI*, the root mean square error is less than 0.035 m³/m³ and 0.042 m³/m³ for in situ and simulated saturation degree, respectively. More notably, when the m_s product is compared with modeled data at 3 cm depth, this index is found able to accurately reproduce the temporal pattern of the simulated saturation degree in terms of both timing and entity of its variations also at fine temporal scale. The daily temporal resolution and the reliability obtained with the ASCAT derived saturation degree products represent the preliminary step for its effective use in operational rainfall-runoff modeling.     

Comparison of ERS-2 SAR and Landsat TM imagery for monitoring agricultural crop and soil conditions

Studies over the past 25 years have shown that measurements of surface reflectance and temperature (termed optical remote sensing) are useful for monitoring crop and soil conditions. Far less attention has been given to the use of radar imagery, even though synthetic aperture radar (SAR) systems have the advantages of cloud penetration, all-weather coverage, high spatial resolution, day/night acquisitions, and signal independence of the solar illumination angle. In this study, we obtained coincident optical and SAR images of an agricultural area to investigate the use of SAR imagery for farm management. The optical and SAR data were normalized to indices ranging from 0 to 1 based on the meteorological conditions and sun/sensor geometry for each date to allow temporal analysis. Using optical images to interpret the response of SAR backscatter (σ^o) to soil and plant conditions, we found that SAR σ^o was sensitive to variations in field tillage, surface soil moisture, vegetation density, and plant litter. In an investigation of the relation between SAR σ^o and soil surface roughness, the optical data were used for two purposes: (1) to filter the SAR images to eliminate fields with substantial vegetation cover and/or high surface soil moisture conditions, and (2) to evaluate the results of the investigation. For dry, bare soil fields, there was a significant correlation (r²=.67) between normalized SAR σ^o and near-infrared (NIR) reflectance, due to the sensitivity of both measurements to surface roughness. Recognizing the limitations of optical remote sensing data due to cloud interference and atmospheric attenuation, the findings of this study encourage further studies of SAR imagery for crop and soil assessment.     

Estimating forest structure in wetlands using multitemporal SAR

Data from 202 forest plots on the Roanoke River floodplain, North Carolina were used to assess the capabilities of multitemporal radar imagery for estimating biophysical characteristics of forested wetlands. The research was designed to determine the potential for using widely available data from the current set of satellite-borne synthetic aperture radar (SAR) sensors to study forests over broad geographic areas and complex environmental gradients. The SAR data set included 11 Radarsat scenes, 2 ERS-1 images, and 1 JERS-1 scene. Empirical analyses were stratified by flood status such that sites were compared only if they exhibited common flooding characteristics. In general, the results indicate that forest properties are more accurately estimated using data from flooded areas, probably because variations in surface conditions are minimized where there is a continuous surface of standing water. Estimations yielded root mean square errors (RMSEs) for validation data around 10 m²/ha for basal area (BA), and less than 3 m for canopy height. The r² values generally exceeded .65 for BA, with the best predictions coming from sample sites for which both nonflooded and flooded SAR scenes were available. The addition of early spring normalized difference vegetation index (NDVI) values from Landsat Thematic Mapper (Landsat TM) improved model predictions for BA in forests where BA levels were <55 m²/ha. Further analyses indicated a very limited sensitivity of the individual SAR scenes to differences in forest composition, although soil properties in nonflooded areas exerted a weak but nevertheless important influence on backscatter.     

Likelihood parameter estimation for calibrating a soil moisture model using radar bakscatter

Land surface model parameter estimation can be performed using soil moisture information provided by synthetic aperture radar imagery. The presence of speckle necessitates aggregating backscatter measurements over large (> 100 m × 100 m) land areas in order to derive reliable soil moisture information from imagery, and a model calibrated to such aggregated information can only provide estimates of soil moisture at spatial resolutions required for reliable speckle accounting. A method utilizing the likelihood formulation of a probabilistic speckle model as the calibration objective function is proposed which will allow for calibrating land surface models directly to radar backscatter intensity measurements in a way which simultaneously accounts for model parameter- and speckle-induced uncertainty. The method is demonstrated using the NOAH land surface model and Advanced Integral Equation Method (AIEM) backscatter model calibrated to SAR imagery of an area in the Southwestern United States, and validated against in situ soil moisture measurements. At spatial resolutions finer than 100 m × 100 m NOAH and AIEM calibrated using the proposed radar intensity likelihood parameter estimation algorithm predict surface level soil moisture to within 4% volumetric water content 95% of the time, which is an improvement over a 95% prediction confidence of 10% volumetric water content by the same models calibrated directly to soil moisture information derived from synthetic aperture radar imagery at the same scales. Results suggest that much of this improvement is due to increased ability to simultaneously estimate NOAH parameters and AIEM surface roughness parameters.     

A portable device for the assessment of dynamic visual acuity

Dynamic visual acuity (DVA) thresholds are among the few visual functions predictive of automobile crashes. DVA is also sensitive to alcohol and aging. However, measuring DVA is awkward because there is no standardized, efficient, flexible apparatus for DVA assessment. In this project, we developed a prototype of an automated, portable DVA system using a low-energy laser, and we compared this laser DVA with the traditional device in two within-subjects, repeated measures designs. The two studies included 48 participants (22 males and 26 females with an average age of 18.33 years). The most important findings were that: (1) retest reliabilities of the two DVA devices were comparable and higher with the laser; (2) average correlations between the two devices were r = 0.62 (p < 0.01) and r = 0.65 (p < 0.01) for the two designs respectively; and (3) after correction for reliability attenuation these improved to r = 0.92 and r = 0.78. These findings indicate that a flexible DVA laser device can be developed to measure the same construct as the more traditional bulky DVA device.     

Testing the potential of multi-spectral remote sensing for retrospectively estimating fire severity in African Savannahs

The remote sensing of fire severity is a noted goal in studies of forest and grassland wildfires. Experiments were conducted to discover and evaluate potential relationships between the characteristics of African savannah fires and post-fire surface spectral reflectance in the visible to shortwave infrared spectral region. Nine instrumented experimental fires were conducted in semi-arid woodland savannah of Chobe National Park (Botswana), where fire temperature (T_max) and duration (dt) were recorded using thermocouples positioned at different heights and locations. These variables, along with measures of fireline intensity (FLI), integrated temperature with time (T_sum) and biomass (and carbon/nitrogen) volatilised were compared to post-fire surface spectral reflectance. Statistically significant relationships were observed between (i) the fireline intensity and total nitrogen volatilised (r² = 0.54, n = 36, p < 0.001), (ii) integrated temperature (T_sum−μ) and total biomass combusted (r² = 0.72, n = 32, p < 0.001), and (iii) fire duration as measured at the top-of-grass sward thermocouple (dt_T) and total biomass combusted (r² = 0.74, n = 34, p < 0.001) and total nitrogen volatilised (r² = 0.73, n = 34, p < 0.001). The post-fire surface spectral reflectance was found to be related to dt and T_sum via a quadratic relationship that varied with wavelength. The use of visible and shortwave infrared band ratios produced statistically significant linear relationships with fire duration as measured by the top thermocouple (dt_T) (r² = 0.76, n = 34, p < 0.001) and the mean of T_sum (r² = 0.82, n = 34, p < 0.001). The results identify fire duration as a versatile measure that relates directly to the fire severity, and also illustrate the potential of spectrally-based fire severity measures. However, the results also point to difficulties when applying such spectrally-based techniques to Earth Observation satellite imagery, due to the small-scale variability noted on the ground. Results also indicate the potential for surface spectral reflectance to increase following higher severity fires, due to the laying down of high albedo white mineral ash. Most current techniques for mapping burned area rely on the general assumption that surface albedo decreases following a fire, and so if the image spatial resolution was high enough such methods may fail. Determination of the effect of spatial resolution on a sensor's ability to detect white ash was investigated using a validated optical mixture modelling approach. The most appropriate mixing model to use (linear or non-linear) was assessed using laboratory experiments. A linear mixing model was shown most appropriate, with results suggesting that sensors having spatial resolutions significantly higher than those of Landsat ETM+ will be required if patches of white ash are to be used to provide EO-derived information on the spatial variation of fire severity.     

Soil moisture retrieval using thermal inertia, determined with visible and thermal spaceborne data, validated for European forests

Variations in soil moisture strongly affect surface energy balances, regional runoff, land erosion and vegetation productivity (potential crop yield). Hence, the detection of soil moisture content (SMC) is very valuable in the social, economic, humanitarian (food security) and environmental segments of society. A method to estimate SMC from optical and thermal spectral information of METEOSAT imagery based on thermal inertia (TI) is presented. Minimum and maximum TI values from time series are combined in the Soil Moisture Saturation Index (SMSI). To convert surface to soil profile values, a Markov type filter is used, based on a simple two layer water balance equation (the surface layer and the reservoir below) and an autocorrelation function. Ten-daily SMC values are compared with up-scaled (using AVHRR/NDVI) observations on 10 EUROFLUX sites in Europe for the 1997 growing season (March-October). Moreover, the thermal inertia approach is compared for 1997, with ERS Scatterometer data for eight EUROFLUX sites. METEOSAT pixels are up-scaled to accommodate the ERS Scatterometer spatial resolution. The regression coefficients (slope, intercept and R²) of the thermal inertia approach versus the up-scaled soil moisture observations from EUROFLUX sites vary between 0.811-1.148, − 0.0029-0.66 and 0.544-0.877, respectively, with a RRMSE range of 3.9% to 35.7%. The regression coefficients of the comparison of ERS Scatterometer derived Soil Water Index (SWI) versus the up-scaled Soil Moisture Saturation Index for the pooled case (binning the eight EUROFLUX sites) are 0.587, 0.105 and 0.441, respectively, with a RRMSE of 38%. A simple error propagation model applied for the thermal inertia approach reveals that the absolute and relative errors of the obtained soil moisture content is at least 0.010 m³ m^− 3 or 2.0% with a SMC of 0.203 m³ m^− 3. Recommendations are made to test and implement the TI methodology using NOAA/AVHRR imagery.     

Validation of AMSR-E soil moisture using L-band airborne radiometer data from National Airborne Field Experiment 2006

AMSR-E has been extensively evaluated under a wide range of ground and climate conditions using in situ and aircraft data, where the latter were primarily used for assessing the T_B calibration accuracy. However, none of the previous work evaluates AMSR-E performance under the conditions of flood irrigation or other forms of standing water. Also, it should be mentioned that global soil moisture retrievals from AMSR-E typically utilize X-band data. Here, C-band based AMSR-E soil moisture estimates are evaluated using 1 km resolution retrievals derived from L-band aircraft data collected during the National Airborne Field Experiment (NAFE'06) field campaign in November 2006. NAFE'06 was conducted in the Murrumbidgee catchment area in southeastern Australia, which offers diverse ground conditions, including extensive areas with dryland, irrigation, and rice fields. The data allowed us to examine the impact of irrigation and standing water on the accuracy of satellite-derived soil moisture estimates from AMSR-E using passive microwave remote sensing. It was expected that in fields with standing water, the satellite estimates would have a lower accuracy as compared to soil moisture values over the rest of the domain. Results showed sensitivity of the AMSR-E to changes in soil moisture caused by both precipitation and irrigation, as well as good spatial (average R = 0.92 and RMSD = 0.049 m³/m³) and temporal (R = 0.94 and RMSD = 0.04 m³/m³) agreement between the satellite and aircraft soil moisture retrievals; however, under the NAFE'06 ground conditions, the satellite retrievals consistently overestimated the soil moisture conditions compared to the aircraft.     

Salt-marsh characterization, zonation assessment and mapping through a dual-wavelength LiDAR

Linking intertidal processes to their natural patterns within a framework of coastal erosion requires monitoring techniques providing high-resolution spatio-temporal data from the scale of processes to this of patterns. The Scanning Hydrographic Operational Airborne LiDAR Survey (SHOALS) consists of a ubiquitous topographic and bathymetric LiDAR (Light Detection And Ranging) system that has become an important technology for generating high-resolution Digital Terrain Models (DTM) and Digital Surface Models (DSM) over intertidal landscapes. The objectives of this project are i) to highlight the capacity of SHOALS Topography and intensity data (Red and Near-InfraRed) to detect intertidal vegetation, ii) to assess the salt-marsh zonation, and iii) to map intertidal habitats and its adjacent coastal areas (Gulf of St. Lawrence, Canada). The study area was selected based on the spectrum of land cover types, encompassing beach, salt-marsh, arable farm and urban coastal environments. Surfaces constructed from the LiDAR survey included DSM, DTM, Normalized Surface Model (NSM), Digital Intensity Model for InfraRed (DIMI), Digital Intensity Model for Red (DIMR), and Normalized Difference LiDAR Vegetation Index Model (NDLVIM), derived from the two previous models. The correlation between the so-called NDLVI and the amount of salt-marsh vegetation, measured in situ, was 0.87 (p < 0.01). Then, LiDAR-assessed salt-marsh ecological zonation allowed finding out intermediate and strong relationships between NDLVI and Topography (r² = 0.89, p < 0.038) and Topographic heterogeneity (r² = 0.54, p < 0.1394), respectively. Finally, NDLVI and Topography surfaces were classified using maximum likelihood algorithm into 17 classes, whose overall accuracy and kappa coefficient were 91.89% and 0.9088, respectively. These results support that (1) intertidal vegetation can be discriminated by NDLVI, (2) salt-marsh ecological zonation pattern, and (3) accurate coastal land cover maps can be satisfactorily generated from a single LiDAR survey using the NDLVIM and DTM approach.     

Short contributions

Studies of ERS-1 synthetic aperture radar (SAR) imagery have shown that fire scars in Alaskan forests are significantly brighter (3–6 dB) than surrounding unburned forest. The signature varies seasonally and changes as vegetation re-establishes on the site over longer time periods (>5years). Additionally, it is known that soil water content typically increases following forest fires due to changes in evapotranspiration rates and melting of the permafrost.

The objective of this study was to understand the relation between soil water content and the ERS-1 SAR signature at fire-disturbed sites. To accomplish this objective, we compared soil water in six burned black spruce (Picea mariana (Mill.) B.S.P.) forest sites in interior Alaska to ERS-1 SAR backscalter measurements. The six sites are of various age since burn. Soil water was periodically measured at each site during the summer of 1992 and at one site in 1993 and 1994 when the ERS-1 imaging radar was scheduled to pass overhead. Results indicate that a positive linear relation exists between soil water content and the SAR backscatter coefficient in young burns ( < ～4years). Older burns do not show this relation, a result of vegetation establishment following the burn. This interaction between soil moisture condition and ERS-1 SAR backscatter shows great potential for measuring soil water content and monitoring seasonal variations in soil water content in black spruce sites recently disturbed by wildfire.     

Remote sensing of photosynthetic light-use efficiency across two forested biomes: Spatial scaling

Eddy covariance (EC) measurements have greatly advanced our knowledge of carbon exchange in terrestrial ecosystems. However, appropriate techniques are required to upscale these spatially discrete findings globally. Satellite remote sensing provides unique opportunities in this respect, but remote sensing of the photosynthetic light-use efficiency (ε), one of the key components of Gross Primary Production, is challenging. Some progress has been made in recent years using the photochemical reflectance index, a narrow waveband index centered at 531 and 570 nm. The high sensitivity of this index to various extraneous effects such as canopy structure, and the view observer geometry has so far prevented its use at landscape and global scales. One critical aspect of upscaling PRI is the development of generic algorithms to account for structural differences in vegetation. Building on previous work, this study compares the differences in the PRI: ? relationship between a coastal Douglas-fir forest located on Vancouver Island, British Columbia, and a mature Aspen stand located in central Saskatchewan, Canada. Using continuous, tower-based observations acquired from an automated multi-angular spectro-radiometer (AMSPEC II) installed at each site, we demonstrate that PRI can be used to measure ? throughout the vegetation season at the DF-49 stand (r² = 0.91, p < 0.00) as well as the deciduous site (r² = 0.88, p < 0.00). It is further shown that this PRI signal can be also observed from space at both sites using daily observations from the Moderate Resolution Imaging Spectro-radiometer (MODIS) and a multi-angular implementation of atmospheric correction (MAIAC) (r² = 0.54 DF-49; r² = 0.63 SOA; p < 0.00). By implementing a simple hillshade model derived from airborne light detection and ranging (LiDAR) to approximate canopy shadow fractions (α_s), it is further demonstrated that the differences observed in the relationship between PRI and ε at DF-49 and SOA can be attributed largely to differences in α_s. The findings of this study suggest that algorithms used to separate physiological from extraneous effects in PRI reflectance may be more broadly applicable and portable across these two climatically and structurally different biome types, when the differences in canopy structure are known.