共查询到20条相似文献,搜索用时 850 毫秒
1.
2.
试井分析在油气藏数值模拟中的应用 总被引:1,自引:0,他引:1
何琦 《天然气勘探与开发》2005,28(1):28-30
地质模型的建立在数值模拟中至关重要。然而,通过地质统计学建立的地质模型是一根据静态资料(如岩心、测井和地震资料等)生成的油气藏特性,当数据在平面上不是近距离分布时,得出的油气藏描述将有很大的不确定性。基于反演问题的理论研究得出,油气藏压力资料,特别是动态压力资料,能够降低静态地质模型中的不确定性。通过几个实例,证实了试井分析在改善这种不确定性方面所作的贡献,从而进一步证明了试井分析在数值模拟中的重要作用。 相似文献
3.
对于地层构造和油水分布复杂、岩石物性纵向与横向上差异大的油气藏,由于长期的采油和注水,地层压力发生了很大的变化.在利用传统地层压力预测方法预测的地层压力进行开发中后期的调整井钻井设计时,将会影响安全钻井.提出了应用油藏数值模拟及现代油藏工程方法,利用实际生产数据和动态监测等资料预测调整井压力的方法.该方法基于调整井所在区块开发井的资料(测井资料、井史资料、地层压力测试资料以及生产数据)建立油藏精细地质模型,通过历史拟合,再现油藏开发的过程,获得当前地层的准确压力分布情况,确定出调整井井眼轨迹的压力分布,为复杂油气藏开发中后期安全、高效地钻调整井提供了依据. 相似文献
4.
5.
油藏非均质性的定量描述方法 总被引:6,自引:1,他引:5
油藏非均质性的定量描述方法在油田开发,特别是在三次采油中起着至关重要的作用.仅仅通过对静态资料如测井、取心和地震资料的解释而建立的地质模型不能很好地说明流体在多孔介质的渗流特征.在前人研究的基础上,从油藏的实际情况出发,如油藏由多个小层构成,每个小层的有效厚度、流体饱和度分布不同的特点,将脉冲试井与数值模拟理论有机地结合在一起,通过模拟脉冲试井过程,将计算结果与实测的脉冲反应曲线做对比,修正初始的地质模型,最终可获得油藏各小层的渗透率非均质分布图.这种动态资料与静态描述相结合的油藏描述方法可为聚合物采油技术的开展提供可靠的地质模型.以大庆油田单层注聚合物试验区为例,说明了这种方法在油田开发中的应用. 相似文献
6.
塔里木油田气井无阻流量计算公式探讨 总被引:2,自引:0,他引:2
根据以往塔里木盆地计算气井产能的常用方法,对塔里木油田高压气井产能测试资料进行了分析研究,讨论了拟压力形式分析方法与压力形式分析方法之间存在的关系,建立了高压气井拟压力计算无阻流量与压力平方计算无阻流量的经验关系,组出了适合于高压气井的拟压力及压力形式一点法无组流量计算公式。通过大量的实例计算,证实该方程计算结果与产能测试(回压试井,等时试井、修正等时试井)数据分析结果一致,计算结果可靠适用,能正确预测塔里木盆地高压气井的生产动态,指导高压气井的合理生产。 相似文献
7.
8.
气井井下油管动态摩阻系数计算方法的提出,提高了气井垂管流动压力计算的精度,对气井生产动态分析和预测起到了很好的推动作用。借助1口干气井的多点回压法试井资料,介绍了如何利用气井稳定试井资料,确定该气井此时此刻井下油管动态摩阻系数;利用产能方程给出产量和对应的井底压力,结合油管动态摩阻系数计算井口压力,建立该井准确的井口流出动态方程并编绘井口流出动态曲线;讨论了随着地层压力递减和井下油管动态摩阻系数变化规律,井口流出动态方程或井口流出动态曲线的变化规律。气井的多点回压法试井资料的利用,可以准确地预测气井井口流出动态,从而提高采收率。 相似文献
9.
10.
用早期试井资料计算低渗裂缝井地层压力的一种方法 总被引:5,自引:3,他引:2
冯风萍 《大庆石油地质与开发》2005,24(3):63-65,i005
低渗透油田的压力恢复试井资料一般不能测出径向流直线段,称为早期试井资料。但是低渗透油田往往裂缝比较发育,并且油井都须压裂投产。本文针对这种情况分析了裂缝井压力恢复测试早期的井底渗流特征,井底的早期渗流属于裂缝单向流动,并依据长关井压力恢复资料建立了利用早期试井资料计算地层压力的实用方法。 相似文献
11.
12.
SZ油田已进入开发中后期的高含水阶段,为进一步描述储层分布规律,以高分辨率层序地层学理论为基础,采用岩心、测井、地震资料和生产动态资料等方法,对SZ油田东营组下段的层序地层及基准面旋回界面、洪泛面的成因类型进行综合研究,建立了中短期旋回层序地层框架。在此基础上进行短期层序为单元的等时地层对比,同时划分单井沉积微相并描述小层单元内沉积微相特征。应用层序地层学和相控储层建模技术,建立能精细表征储层非均质特征的地质预测模型,并利用油藏数值模拟对油田压力、含水率进行历史拟合,拟合结果与油田实际生产数据吻合较好,表明利用层序地层学及相控地质建模技术可为油田中后期综合调整及挖潜提供可靠的地质依据。 相似文献
13.
扇三角洲露头区沉积模拟研究 总被引:16,自引:1,他引:15
露头储层沉积体系的准确划分是建立储层地质知识库和研究随机建模方法的基础和关键。储层岩石相的模拟与预测是储层沉积学和油田实际生产的主要课题之一,通过对扇三角洲露头岩石相的模拟研究,总结出了该类扇三角洲沉积体储层建筑结构的模拟与预测方法,经对不同岩石相多种模拟方法的试运算,给出了对于该类沉积体系的最佳模拟方法,并通过实际检验证明是可信的。在本研究中,随着井距的扩大,原始数据点的减少,沉积相模拟的效果逐渐变差,但是该方法能够反映扇三角洲沉积相的分布规律,特别是扇三角洲平原亚相,基本可以恢复露头的原模型。 相似文献
14.
克深2气藏属于典型的裂缝性低孔砂岩有水气藏,储层基质物性差,裂缝发育。研究发现,根据传统认识建立的双重介质模型计算的气藏压力传播速度慢、气井见水时间晚,渗流特征与实际存在较大差异。为此,结合当前各种静、动态资料,利用数值试井方法对气藏不稳定试井资料进行了系统分析,在此基础上建立数值模拟机理模型,对该气藏井组干扰试井的压力传播时间、干扰曲线特征以及气井水侵特征都进行了深入研究。结果表明,克深2气藏表现为断层、裂缝、基质“三重介质”的渗流特征,断层是气藏压力传播和水侵的高速通道。边水推进过程中,沿断层的水侵速度明显快于似均质裂缝储层,导致气井快速见水。研究提出的断层、裂缝、基质“三重介质”新渗流模式下的气藏渗流特征与实际情况高度吻合。机理研究表明:保持较低的开采速度,降低边部气井产量,同时优先对中、边部井间有断层的边部见水井进行带水或排水,可有效延缓边水沿断层向气藏中部的侵入速度,提高气藏的最终采收率。 相似文献
15.
Y. J. Ji L. S. Cheng J. J. Liu L. Y. Ye D. Liu 《Petroleum Science and Technology》2013,31(10):977-987
Abstract The fluid mechanics, solid mechanics, and heat transfer theories are used to establish a thermal-hydro-mechanical (THM) coupling model of thermal recovery. The numerical solution of the model is obtained according to the finite element method using COMSOL, where the seepage and stress field near the well are simulated and the effectiveness of the numerical model is examined by comparing the simulation results with the field test data. In addition, the influence of injection-production parameters on the pressure on a casing pipe is simulated with the model. The results indicate that both the decline of well bottom-hole pressure and the increase of steam injection rate may cause casing damage. Proposed measures for preventing casing damage include controlling the change scope of well bottom-hole pressure and restricting the steam or water injection rate. 相似文献
16.
为了解决海上油田现场缺少高精密压力监测数据的问题,利用水平井历史生产数据和不稳定试井分析方法进行各向异性油藏水平井的评价和预测。基于水平井的三维源函数和Newman乘积原理建立变流量各向异性油藏水平井压力动态响应关系,并将该关系式离散化转换为可实际应用的卷积和矩阵形式的水平井变流量压力响应试井模型,最后应用最优化算法求解模型最优解。该模型可用于评价水平井油藏生产动态特性,同时也确定了计算过程中构成水平井点源函数中级数项数目,应用最优化方法求解确定的模型参数也可用于生产动态预测。实际现场应用结果表明,变流量水平井压力动态响应模型的计算结果符合实际生产动态,相对误差平均3.1%,对评价水平井油藏特性、预测水平井开发生产具有现实指导意义。 相似文献
17.
This paper presents an approach to the evaluation of reservoir models using transient pressure data. Braided fluvial sandstones exposed in cliffs in SW England were studied as the surface equivalent of the Triassic Sherwood Sandstone, a reservoir unit at the nearby Wytch Farm oilfield. Three reservoir models were built; each used a different modelling approach ranging in complexity from stochastic pixel‐based modelling using commercially available software, to a spreadsheet random number generator. In order to test these models, numerical well test simulations were conducted using sector models extracted from the geological models constructed. The simulation results were then evaluated against the actual well test data in order to find the model which best represented the field geology. Two wells at Wytch Farm field were studied. The results suggested that for one of the sampled wells, the model built using the spreadsheet random number generator gave the best match to the well test data. In the well, the permeability from the test interpretation matched the geometric average permeability. This average is the “correct” upscaled permeability for a random system, and this was consistent with the random nature of the geological model. For the second well investigated, a more complex “channel object” model appeared to fit the dynamic data better. All the models were built with stationary properties. However, the well test data suggested that some parts of the field have different statistical properties and hence show non‐stationarity. These differences would have to be built into the model representing the local geology. This study presents a workflow that is not yet considered standard in the oil industry, and the use of dynamic data to evaluate geological models requires further development. The study highlights the fact that the comparison or matching of results from reservoir models and well‐test analyses is not always straightforward in that different models may match different wells. The study emphasises the need for integrated analyses of geological and engineering data. The methods and procedures presented are intended to form a feedback loop which can be used to evaluate the representivity of a geological model. 相似文献
18.
19.
20.
G. Espinosa-Paredes U. Olea-Gonzalez E.-G. Espinosa-Martinez A. Vázquez-Rodríguez H. Romero-Paredes R. Vázquez-Rodríguez 《Petroleum Science and Technology》2013,31(12):1250-1259
Abstract The performance of three inverse simulation methods to obtain formation temperatures (FTs) in wellbores is presented in this article. The inverse simulation methods are based on three solution schemes: nonlinear least-squares approach based on the Levenberg-Marquardt method, a feedback-based method, and a cognitive model. The first is an algorithm optimization and the other two are tracking algorithms. The simulations using data from an oil well show the performance to predict static formation temperatures (SFTs) with these inversion schemes. 相似文献