Mechanically activated starch magnetic microspheres for Cd(Ⅱ) adsorption from aqueous solution

Magnetic starch microspheres(AAM-MSM) were synthesized via an inverse emulsion graft copolymerization by using mechanically activated cassava starch(MS) as a crude material, acrylic acid(AA) and acrylamide(AM) as graft copolymer monomers, and methyl methacrylate(MMA) as the dispersing agent and used as an adsorbent for the removal of Cd(II) ions from aqueous solution. Fourier-transform infrared spectroscopy(FT-IR), X-ray photoelectron spectroscopy(XPS), scanning electron microscopy(SEM), and vibrating sample magnetometry(VSM) were used to characterize the AAM-MSM adsorbent. The results indicated that AA, AM, and MMA were grafted to the MS, and the Fe_3 O_4 nanoparticles were encapsulated in the AAM-MSM adsorbent microspheres.The adsorbent exhibited a smooth surface, uniform size, and good sphericity because of the addition of the MMA and provided more adsorption sites for the Cd(II) ions. The maximum adsorption capacity of Cd(II) on the AAM-MSM was 39.98 mg·g~(-1). The adsorbents were superparamagnetic, and the saturation magnetization was 16.7 A·m~2·kg~(-1). Additionally, the adsorption isotherms and kinetics of the adsorption process were further investigated. The process of Cd(II) ions adsorbed onto the AAM-MSM could be described more favorably by the pseudo-second-order kinetic and Langmuir isothermal adsorption models, which suggested that the chemical reaction process dominated the adsorption process for the Cd(II) and chemisorption was the rate-controlling step during the Cd(II) removal process.     

Kinetic and thermodynamic studies of acid scarlet 3R adsorption onto low-cost adsorbent developed from sludge and straw简

A low-cost adsorbent was prepared from sludge and straw by pyrolysis in a dried state with the surface area of the adsorbent of 829.49 ma. g-l, micropore volume of 0.176 cm2·g-1 and average pore radius of 5.0 nm. The kinetic, equilibrium isotherm and thermodynamic characteristics of trisodium 1-（1-naphthylazo）-2-hydroxynaphthalene- 4＇,6,8-trisulphonate （acid scarlet 3R） onto the adsorbent from sludge and straw were investigated. The results indicated that the pseudo second order adsorption was the predominant adsorption mechanism of acid scarlet 3R. Thus, the adsorption phenomenon was suggested as a chemical process. The adsorption data were fitted better with Langmuir model than Freundlich model, indicating that the adsorption of acid scarlet 3R belonged to the monolayer adsorption and mainly occurred in micropores.     

菌丝体-甲壳素水处理剂对重金属离子吸附性能的研究

The adsorption properties of chitin adsorbent from mycelium of fermentation industries for the removal of heavy metal ions were studied.The result shows that the chitin adsorbent has high adsorption capacity for many heavy metal ions and Ni^2 in citric acid.The influence of pH was significant:When pH is higher than 4.0,the high adsorption capacity is obtained.otherwise H^ ion inhibits the adsorption of heavy metal ions.The comparison of the chitin adsorbent with some other commercial adsorbents was made,in which that the adsorption behavior of chitin adsorbent is close to that of commercial cation exchange adsorbents,and its cost is much lower than those commercial adsorbents.     

交联氧化铝-壳聚糖新杂化吸附剂的制备及去除废水中Cu(Ⅱ)(英文)

A novel biosorbent was developed by coating chitosan,a naturally and abundantly available biopolymer,on to activated alumina based on oil shale ash via crosslinking.The adsorbent was characterized by various techniques,such as Fourier transform infrared spectroscopy,scanning electron microscopy,thermogravimetric-differential thermal analysis,and X-ray photoelectron spectroscope.Batch isothermal equilibrium adsorption experiments were condcted to evaluate the adsorbent for the removal of Cu(Ⅱ) from wastewater.The effect of pH and agitation time on the adsorption capacity was also investigated,indicating that the optimum pH was 6.0.The equilibrium adsorp-tion data were correlated with Langmuir and Freundlich models.The maximum monolayer adsorption capacity of chitosan coated alumina sorbent as obtained from Langmuir adsorption isotherm was found to be 315.46 mg·g-1 for Cu(Ⅱ).The adsorbent loaded with Cu(Ⅱ) was readily regenerated using 0.1 mol?L?1 sodium hydroxide solution.All these indicated that chitosan coated alumina adsorbent not only have high adsorption activity,but also had good stability in the wastewater treatment process.     

超声辅助合成磁性四氧化三铁/氧化石墨烯复合物及其在染料去除中的应用（英文）

A simple ultrasound-assisted co-precipitation method was developed to prepare ferroferric oxide/graphene oxide magnetic nanoparticles (Fe3O4/GO MNPs). The hysteresis loop of Fe3O4/GO MNPs demonstrated that the sample was typical of superparamagnetic material. The samples were characterized by transmission electron microscope, and it is found that the particles are of small size. The Fe3O4/GO MNPs were further used as an adsorbent to remove Rhodamine B. The effects of initial pH of the solution, the dosage of adsorbent, temperature, contact time and the presence of interfering dyes on adsorption performance were investigated as well. The adsorption equilibrium and kinetics data were fitted well with the Freundlich isotherm and the pseudo-second-order kinetic model respectively. The adsorption process followed intra-particle diffusion model with more than one process affecting the adsorption of Rhodamine B. And the adsorption process was endothermic in nature. Furthermore, the magnetic composite with a high adsorption capacity of Rhodamine B could be effectively and simply separated using an external magnetic field. And the used particles could be regenerated and recycled easily. The magnetic composite could find potential applications for the removal of dye pollutants.     

Adsorption of Hg(Ⅱ) from aqueous solution using thiourea functionalized chelating fiber

A fast and selective adsorbent for Hg(II) from aqueous solutions using thiourea(TU) functionalized polypropylene fiber grafted acrylic acid(PP-g-AA),PP-g-AA-TU fibers,was characterized by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy.The adsorption behavior of the functionalized chelating fibers for Hg(II) was investigated by static adsorption experiments,and the effects of some essential factors on adsorption of Hg(II) were examined,such as pH,initial concentration,adsorption time,coexisting cations,and temperature.The results showed that the adsorptive equilibrium could be achieved in 10 min,and the equilibrium adsorption quantity of PP-g-AA-TU fibers was 20 times that of PP-g-AA fibers.The PP-g-AA-TU fibers showed a very high adsorption rate and a good selectivity for Hg(II) over a wide range of p H.The adsorption isotherm can be well described with Langmuir model,with the maximum adsorption capacity for Hg(II) up to52.04 mg·g~(-1)and the removal of Hg(II) more than 97%.The kinetic data indicate that the adsorption process is best-fitted into the pseudo-second-order model.     

Adsorption of 2-naphthalenesulfonic acid/sulfuric acid/sulfurous acid from aqueous solution by iron-impregnated weakly basic resin:Equilibrium and model

Commercial grade weakly basic resin D301 was impregnated with iron through a simple method using ferric chloride. Experiments for single, bisolute and trinary competitive adsorption were carried out to investigate the adsorption behavior of 2-naphthalenesulfonic acid (NSA), sulfuric acid and sulfurous acid from their solution at 298K onto the novel hybrid iron impregnated D301(Fe-D301). Adsorption affinity of NSA on Fe-D301 was found to be much higher than that of sulfuric acid, while adsorption affinity of sulfuric acid was slightly higher than that of sulfurous acid. The data of single-solute adsorption were fitted to the Langmuir model and the Freundlich adsorption model. The non-ideal competitive adsorbed model coupled with the single-solute adsorp-tion models were used to predict the bisolute and trinary-solute competitive adsorption equilibria. The NICM coupled with the Langmuir model yields the favorable representation of the bisolute and trinary-solute compet-itive adsorption behavior.     

2-萘磺酸/硫酸在弱碱性树脂上的吸附平衡研究

Experiments for single and bisolute competitive adsorption were carried out to investigate the adsorption behavior of β-naphthalenesulfonic acid(NSA and sulfuric acid from their solution at 25℃ onto weakly basic resin D301R,Adsorption affinity of sulfuric acid on D301R was found to be much higher than that of NSA.The data of single-solute adsorption were fitted to the Langmuir model and the Freundlich adsorption model.The ideal adsorbed solution theory(IAST) coupled with the single-solute adsorption models were used to predict the bisolute competitive adsorption equilibria.The IAST coupled with the Langmuir and the Freundlich model for sulfuric acid and NSA.Respectively,yields the favorable representation of the bisolute competitive adsorption behavior.     

Removal of Cd（II） by Nanometer AIO（OH） Loaded on Fiberglass with Activated Carbon Fiber Felt as Carrier

A new nanometer material, nanometer AlO（OH） loaded on the fiberglass with activated carbon fibers felt（ACF） as the carrier, was prepared by hydrolytic reaction for the removal of Cd（II） from aqueous solution using column adsorption experiment. As was confirmed by XRD determination, the hydrolysis production loaded on fiberglass was similar to the orthorhombic phase AlO（OH）. SEM images showed that AlO（OH） particles were in the form of small aggregated clusters. The Thomas model was applied for estimating the kinetic parameters and the saturated adsorption ability of Cd（II） adsorption on the new adsorbent. The results showed that the maximum adsorption capacity of Cd（II） was 128.50 mg·g^-1 and 117.86 mg·g^-1 for the adsorbent mass of 0.3289 g and the adsorbent mass of 0.2867 g, respectively. The elution experiment result indicated that the adsorbed Cd ions was easily desorbed from the material with 0.1 mol·L^-1 HCl solution. Adsorption-desorption cycles showed the feasibility of repealed uses of the composited material. The adsorption capacities were influenced by pH and the initial Cd（II） concentration. The amount adsorbed was greatest at pH 6.5 and the initial Cd（II） concentration of 0.07 mg·L^-1, respectively. Nanometer AlO（OH） played a major role in the adsorption process, whereas the fiberglass and ACF were assistants in the process of removing Cd（II）. In addition, the adsorption capacities for Cd（II） were obviously reduced from 128.50 mg·L^-1 to 64.28 mg·L^-1 when Pb ions were present because Pb ions took up more adsorption sites.     

Removal of Phosphate from Aqueous Solution with Modified Bentonite

Bentonite combined with sawdust and other metallic compounds was used to remove phosphate from aqueous solutions in this study. The adsorption characteristics of phosphate on the modified bentonite were investigated, including the effects of temperature, adsorbent dosage, initial concentration of phosphate and pH on removal of phosphate by conducting a series of batch adsorption experiments. The results showed that 98% removal rate of phosphate was obtained since sawdust and bentonite used in this investigation were abundantly and locally available. It is concluded that modified bentonite is a relatively efficient, low cost and easily available adsorbent for the removal of phosphate from aqueous solutions.     

Synthesis of activated carbon from spent tea leaves for aspirin removal

Adsorption capacity of activated carbon prepared from spent tea leaves(STL-AC) for the removal of aspirin from aqueous solution was investigated in this study. Preliminary studies have shown that treatment with phosphoric acid(H_3PO_4) increased removal efficiency of STL-AC. Characterizations on STL-AC revealed excellent textural properties(1200 m~2·g~(-1), 51% mesoporosity), as well as distinctive surface chemistry(1.08 mmol·g~(-1) and 0.54 mmol·g~(-1) for acidic and basic oxygenated groups, pH_(pzc)= 2.02). Maximum removal efficiency of aspirin observed was 94.28% after 60 min when the initial concentration was 100 mg·L~(-1), 0.5 g of adsorbent used,pH 3 and at a temperature of 30 ℃. The adsorption data were well fitted to the Freundlich isotherm model and obeyed the pseudo-second order kinetics model. The adsorption of aspirin onto STL-AC was exothermic in nature(ΔH~Θ=~(-1)3.808 k J·mol~(-1)) and had a negative entropy change, ΔS~Θ(-41.444 J·mol~(-1)). A negative Gibbs free energy, ΔG~Θ was obtained indicating feasibility and spontaneity of the adsorption process. The adsorption capacity of AC-STL(178.57 mg·g~(-1)) is considerably high compared to most adsorbents synthesized from various sources, due to the well-defined textural properties coupled with surface chemistry of STL-AC which favors aspirin adsorption. The results demonstrate the potential of STL-AC as aspirin adsorbent.     

Superior adsorption performance of graphitic carbon nitride nanosheets for both cationic and anionic heavy metals from wastewater

Water pollution caused by highly toxic Cd(II), Pb(II), and Cr(VI) is a serious problem. In the present work,a green and low-cost adsorbent of g-C_3N_4 nanosheets was developed with superior capacity for both cationic and anionic heavy metals. The adsorbent was easily fabricated through one-step calcination of guanidine hydrochloride with thickness less than 1.6 nm and specific surface area of 111.2 m~2·g~(-1). Kinetic and isotherm studies suggest that the adsorption is an endothermic chemisorption process, occurring on the energetically heterogeneous surface based on a hybrid mechanism of multilayer and monolayer adsorption. The tri-s-triazine units and surface N-containing groups of g-C_3N_4 nanosheets are proposed to be responsible for the adsorption process.Further study on pH demonstrates that electrostatic interaction plays an important role. The maximum adsorption capacity of Cd(II), Pb(II), and Cr(VI) on g-C_3N_4 nanosheets is 123.205 mg·g~(-1), 136.571 mg·g~(-1),and 684.451 mg·g~(-1), respectively. The better adsorption performance of the adsorbent than that of the recently reported nanomaterials and low-cost adsorbents proves its great application potential in the removal of heavy metal contaminants from wastewater. The present paper developed a promising adsorbent which will certainly find applications in wastewater treatment and also provides guiding significance in designing adsorption processes.     

Unravel the potential of zinc oxide nanoparticle-carbonized sawdust matrix for removal of lead(Ⅱ) ions from aqueous solution

Zinc oxide nanoparticles(ZnOnp) are molecular nanoparticles synthesized by a chemical precipitation method from zinc nitrate tetrahydrate and sodium hydroxide.Carbonized sawdust(CSD) was prepared from sawdust obtained from a local wood mill.The matrix of both provides a better material as an adsorbent.The present study applied the functionality of ZnOnp,CSD,and ZnOnp-CSD matrix as adsorbent materials for the removal of Pb(Ⅱ) ions from aqueous solution.The method of batch process was employed to investigate the potential of the adsorbents.The influence of pH,contact time,initial concentration of adsorbate,the dosage of adsorbents,and the temperature of adsorbate-adsorbent mixture on the adsorption capacity were revealed.The adsorption isotherm studies indicate that both Freundlich and Langmuir isotherms were suitable to express the experimental data obtained with theoretical maximum adsorption capacities(q_m) of 70.42,87.72,and 92.59 mg·g~(-1) for the adsorption of Pb(Ⅱ) ions onto ZnOnp,CSD,and ZnOnp-CSD matrix,respectively.The separation factors(R_L) calculated showed that the use of the adsorbents for the removal of Pb(Ⅱ) ions is a feasible process with R_L 1.The thermodynamic parameters obtained revealed that the processes are endothermic,feasible,and spontaneous in nature at 25-50℃.Evaluation of the kinetic model elected that the processes agreed better with pseudo-second order where the values of rate constant(k_2) obtained for the adsorption of Pb(Ⅱ) ions onto ZnOnp,CSD,and ZnOnp-CSD matrix are 0.00149,0.00188,and 0.00315 g·mg~(-1)·min~(-1),respectively.The reusability potential examined for four cycles indicated that the adsorbents have better potential and economic value of reuse and the ZnOnp-CSD matrix indicates improved adsorbent material to remove Pb(Ⅱ) ions from aqueous solution.     

Adsorptive potential of Acacia nilotica based adsorbent for chromium(Ⅵ) from an aqueous phase

The objective of this research was to enhance adsorption capacity of Acacia nilotica(keekar) sawdust for the abatement of chromium bearing wastewater and to investigate the effect of process parameters on adsorption capacity. The sawdust was activated by acid wash and functionalized subsequently with formaldehyde.Functionalization of activated sawdust raised its chromium removal efficiency of almost 10% as compared to its adsorption removal efficiency of HCl treated sawdust in a batch adsorption study. Adsorption kinetic data provided better fitting with pseudo second order model. Maximum adsorption capacity calculated through the best fitting Langmuir model was 6.34 mg·g~(-1) and 8.2 mg·g~(-1) for HCl treated and formaldehyde functionalized sawdust adsorbents, respectively. The adsorption of Cr(Ⅵ) was endothermic when studied by varying temperature from 20 °C to 50 °C for both activated and functionalized adsorbents.     

Synthesis of a novel functional group-bridged magnetized bentonite adsorbent:Characterization,kinetics, isotherm,thermodynamics and regeneration

A novel magnetic adsorbent was synthesized by magnetizing bentonite by APTES-Fe_3O_4 via a functional groupbridged interaction. The characterization of APTES-Fe_3O_4/bentonite was conducted via transmission electron microscope(TEM), X-ray diffraction(XRD), Fourier transform infrared spectrophotometer(FT-IR), thermal gravimetric analysis(TGA), vibrating sample magnetometer(VSM), zeta potential analysis and Brunner–Emmet–Teller(BET). The APTES-Fe_3O_4/bentonite was assessed as adsorbents for methylene blue(MB) with a high adsorption capacity(91.83 mg·g~(-1)). Factors affecting the adsorption of MB(such as p H, equilibrium time, temperature and initial concentration) were investigated. The adsorption process completely reaches equilibrium after 120 min and the maximum sorption is achieved at p H 8.0. The adsorption trend follows the pseudosecond order kinetics model. The adsorption data gives good fits with Langmuir isotherm model. The parameter factor RLfalls between 0 and 1, indicating the adsorption of MB is favorable. The adsorption process is endothermic with positive ΔH~0 values. The positive values of ΔG~0 confirm the affinity of the adsorbent towards MB, and suggest an increased randomness at the solid–liquid interface during the adsorption process. Regeneration of the saturated adsorbent was easily carried out via gamma-irradiation.     

以弱碱性树脂去除废水中5-氨基-2-氯苯-4-磺酸和盐酸

This research deals with an investigation of the adsorption of two acids, namely, 5-amino- 2-chlorotoluene-4-sulfonic and chlorhydric acids from their solution onto weakly basic resin. The screening of resins, kinetics, and isotherm were studied. The results indicate that the D301R is more appropriate for the removal of acids from solution. The adsorption of acids obeys Langmuir isotherm and the first-order kinetics model. Sorptive affinity of the two acids on D301R was found to be in the order of 5-amino-2-chlorotoluene-4-sulfonic acid〉 chlorhydric acid. Thermodynamic parameters for the adsorption of acids were calculated and discussed. The maximum removal of acids was observed around 97% and 76% at 25℃ for 5-amino-2-chlorotoluene-4-sulfonic acid and chlorhydric acid, respectively.     

Adsorption removal of o-nitrophenol and p-nitrophenol from wastewater by metal–organic framework Cr-BDC

In the present paper, a metal–organic framework Cr-BDC was prepared and used as adsorbent for adsorption of o-nitrophenol(ONP) and p-nitrophenol(PNP) from aqueous solutions. Cr-BDC was characterized by scanning electron microscopy, transmission electron microscope, X-ray diffraction and BET methods. The results indicate that Cr-BDC gets a very large specific surface area of 4128 m~2·g~(-1)and pore sizes are concentrated in 1 nm, which is a benefit for using for wastewater treatment. The influences of the adsorption conditions, such as temperature,solution concentration, adsorption time and reusability on adsorption performance were investigated. Cr-BDC exhibited an encouraging uptake capacity of 310.0 mg·g~(-1)for ONP, and adsorption capacity of Cr-BDC for ONP is significantly higher than that for PNP under suitable adsorption conditions. The characterizations of adsorption process were examined with the Lagergren pseudo-first-order, the pseudo-second-order kinetic model, and the intra-particular diffusion model. Kinetics experiments indicated that the pseudo-second-order model displayed the best correlation with adsorption kinetics data. Furthermore, our adsorption equilibrium data could be better described by the Freundlich equation. The results indicate that the as-prepared Cr-BDC is promising for use as an effective and economical adsorbent for ONP removal.     

褐煤活性炭吸附苯酚的研究

The feasibility and adsorption effect of lignite activated carbon for phenol removal from aqueous solutions were evaluated and investigated. A series of tests were performed to look into the influence of various experimental parameters such as contact time, initial phenol concentration, temperature, and pH value on the adsorption of phenol by lignite activated carbon. The experimental data were fitted well with the pseudo-second-order kinetic model. The adsorption is an endothermic process and conforms to Freundlich thermodynamic model. The results indicate that the lignite activated carbon is suitable to be used as an adsorbent material for adsorption of phenol from aqueous solutions.     

From pollutant to solution of wastewater pollution: Synthesis of activated carbon from textile sludge for dye adsorption

Adsorption is an important process in wastewater treatment,and conversion of waste materials to adsorbent offers a solution to high material cost related to the use of commercial activated carbon.This study investigated the adsorption behaviour of Reactive Black 5(RB5)and methylene blue(MB)onto activated carbon produced from textile sludge(TSAC).The activated carbon was synthesized through chemical activation of precursor followed with carbonization at 650°C under nitrogen flow.Effects of time(0–200 min),pH(2–10),temperature(25–60°C),initial dye concentration(0–200 mg·L~(-1)),and adsorbent dosage(0.01–0.15 g)on dye removal efficiency were investigated.Preliminary screening revealed that TSAC synthesized via H_2SO_4activation showed higher adsorption behaviour than TSAC activated by KCl and ZnCl_2.The adsorption capacity of TSAC was found to be 11.98 mg·g~(-1)(RB5)and 13.27 mg·g~(-1)(MB),and is dependent on adsorption time and initial dye concentration.The adsorption data for both dyes were well fitted to Freundlich isotherm model which explains the heterogeneous nature of TSAC surface.The dye adsorption obeyed pseudo-second order kinetic model,thus chemisorption was the controlling step.This study reveals potential of textile sludge in removal of dyes from aqueous solution,and further studies are required to establish the applicability of the synthesized adsorbent for the treatment of waste water containing toxic dyes from textile industry.     

固定床柱动态吸附法脱除人参醇提物中铅离子(英文)

The removal of lead from ginseng ethanol extracts by a fixed-bed column filled with an adsorbent bearing amine and carboxyl groups was investigated. The Pb2+ content was determined by inductively coupled plasma mass spectrometry. When the flowrate increased from 0.12 to 0.34 ml·min-1 , the column exhibited a marked increase in percentage of lead removal from 54.9% to 92.3%. Further increase in the flowrate did not bring evident changes to the lead removal, whereas an increase in the temperature could reinforce adsorption further, suggesting that the adsorption process was controlled by external film diffusion below the flowrate of 0.34 ml·min-1 , and by the intraparticle pore diffusion of lead ions when the flowrate exceeded it. A low remaining lead amount in extracts such as 0.11 mg·kg-1 (extracts powder) was achieved. The adsorbents also adsorbed effective constituents to some extent. But 88% of constituents adsorbed were taken off using a 70% ethanol aqueous solution.