Removal of Cd（II） by Nanometer AIO（OH） Loaded on Fiberglass with Activated Carbon Fiber Felt as Carrier

A new nanometer material, nanometer AlO（OH） loaded on the fiberglass with activated carbon fibers felt（ACF） as the carrier, was prepared by hydrolytic reaction for the removal of Cd（II） from aqueous solution using column adsorption experiment. As was confirmed by XRD determination, the hydrolysis production loaded on fiberglass was similar to the orthorhombic phase AlO（OH）. SEM images showed that AlO（OH） particles were in the form of small aggregated clusters. The Thomas model was applied for estimating the kinetic parameters and the saturated adsorption ability of Cd（II） adsorption on the new adsorbent. The results showed that the maximum adsorption capacity of Cd（II） was 128.50 mg·g^-1 and 117.86 mg·g^-1 for the adsorbent mass of 0.3289 g and the adsorbent mass of 0.2867 g, respectively. The elution experiment result indicated that the adsorbed Cd ions was easily desorbed from the material with 0.1 mol·L^-1 HCl solution. Adsorption-desorption cycles showed the feasibility of repealed uses of the composited material. The adsorption capacities were influenced by pH and the initial Cd（II） concentration. The amount adsorbed was greatest at pH 6.5 and the initial Cd（II） concentration of 0.07 mg·L^-1, respectively. Nanometer AlO（OH） played a major role in the adsorption process, whereas the fiberglass and ACF were assistants in the process of removing Cd（II）. In addition, the adsorption capacities for Cd（II） were obviously reduced from 128.50 mg·L^-1 to 64.28 mg·L^-1 when Pb ions were present because Pb ions took up more adsorption sites.     

Relationship between breakthrough curve and adsorption isotherm of Ca(Ⅱ) imprinted chitosan microspheres for metal adsorption

In this work, an equilibrium-dispersion model was successfully established to describe the breakthrough performance of Ca(II) imprinted chitosan (Ca(II)-CS) microspheres packed column for metal adsorption, and the assumptions of Langmuir isotherms and axial dispersion controlled mass transfer process were confirmed. The axial dispersion coefficient in Ca(II)-CS microspheres packed column was found to be almost proportional to the linear velocity and fit for prediction through single breakthrough test. Sensitivity analysis for breakthrough curve indicated the axial dispersion coefficient as well as Langmuir coefficient was sensitive variable for deep removal requirement. The retrieval of the adsorption isotherms of Ca(II)-CS microspheres from breakthrough curve was fulfilled by model ing calibration. A strategy based on the correlation between adsorption isotherms and breakthrough performance was further proposed to simplify the column adsorption design using absorbents with smal/uniform size and fast adsorption kinetics like Ca(II)-CS microspheres to cut down the gap between lab and industry.     

Adsorption of Hg(Ⅱ) from aqueous solution using thiourea functionalized chelating fiber

A fast and selective adsorbent for Hg(II) from aqueous solutions using thiourea(TU) functionalized polypropylene fiber grafted acrylic acid(PP-g-AA),PP-g-AA-TU fibers,was characterized by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy.The adsorption behavior of the functionalized chelating fibers for Hg(II) was investigated by static adsorption experiments,and the effects of some essential factors on adsorption of Hg(II) were examined,such as pH,initial concentration,adsorption time,coexisting cations,and temperature.The results showed that the adsorptive equilibrium could be achieved in 10 min,and the equilibrium adsorption quantity of PP-g-AA-TU fibers was 20 times that of PP-g-AA fibers.The PP-g-AA-TU fibers showed a very high adsorption rate and a good selectivity for Hg(II) over a wide range of p H.The adsorption isotherm can be well described with Langmuir model,with the maximum adsorption capacity for Hg(II) up to52.04 mg·g~(-1)and the removal of Hg(II) more than 97%.The kinetic data indicate that the adsorption process is best-fitted into the pseudo-second-order model.     

Studies on batch adsorptive removal of cadmium and nickel from synthetic waste water using silty clay originated from Balochistan–Pakistan

The potentials of silty clay(SC), acquired from Chaman, Balochistan, were investigated as adsorbent for Ni(Ⅱ)and Cd(Ⅱ) removal from contaminated media. The influence of different operating factors like dose, pH, temperature, and time of contact was explored, and optimum values were noted under batch adsorption method. Isothermal study was conducted with varying concentrations of solutions on optimized conditions and different adsorption models i.e., Langmuir, Freundlich, Temkin and Dubinin–Radushkevich(D–R) isotherm, which were employed to interpret the process. The isothermal data of both Ni(Ⅱ) and Cd(Ⅱ) were well fitted to Langmuir isotherm suggesting the formation of monolayer of metal ions on silty clay. The values of adsorption capacity noted for Ni(Ⅱ) and Cd(Ⅱ) were 3.603 mg·g~(-1) and 5.480 mg·g~(-)1, respectively. Kinetic studies affirmed that pseudo second order(PSO) kinetics was being obeyed by the removal of Ni(Ⅱ) and Cd(Ⅱ). Thermodynamic variables like free energy change(ΔG°), enthalpy change(ΔH°) and entropy change(ΔS°) were calculated. The negative value of ΔG° and the positive values of ΔH° and ΔS° unfolded that the removal process of both metal ions of by SC was spontaneous, endothermic and feasible.     

Unravel the potential of zinc oxide nanoparticle-carbonized sawdust matrix for removal of lead(Ⅱ) ions from aqueous solution

Zinc oxide nanoparticles(ZnOnp) are molecular nanoparticles synthesized by a chemical precipitation method from zinc nitrate tetrahydrate and sodium hydroxide.Carbonized sawdust(CSD) was prepared from sawdust obtained from a local wood mill.The matrix of both provides a better material as an adsorbent.The present study applied the functionality of ZnOnp,CSD,and ZnOnp-CSD matrix as adsorbent materials for the removal of Pb(Ⅱ) ions from aqueous solution.The method of batch process was employed to investigate the potential of the adsorbents.The influence of pH,contact time,initial concentration of adsorbate,the dosage of adsorbents,and the temperature of adsorbate-adsorbent mixture on the adsorption capacity were revealed.The adsorption isotherm studies indicate that both Freundlich and Langmuir isotherms were suitable to express the experimental data obtained with theoretical maximum adsorption capacities(q_m) of 70.42,87.72,and 92.59 mg·g~(-1) for the adsorption of Pb(Ⅱ) ions onto ZnOnp,CSD,and ZnOnp-CSD matrix,respectively.The separation factors(R_L) calculated showed that the use of the adsorbents for the removal of Pb(Ⅱ) ions is a feasible process with R_L 1.The thermodynamic parameters obtained revealed that the processes are endothermic,feasible,and spontaneous in nature at 25-50℃.Evaluation of the kinetic model elected that the processes agreed better with pseudo-second order where the values of rate constant(k_2) obtained for the adsorption of Pb(Ⅱ) ions onto ZnOnp,CSD,and ZnOnp-CSD matrix are 0.00149,0.00188,and 0.00315 g·mg~(-1)·min~(-1),respectively.The reusability potential examined for four cycles indicated that the adsorbents have better potential and economic value of reuse and the ZnOnp-CSD matrix indicates improved adsorbent material to remove Pb(Ⅱ) ions from aqueous solution.     

交联氧化铝-壳聚糖新杂化吸附剂的制备及去除废水中Cu(Ⅱ)(英文)

A novel biosorbent was developed by coating chitosan,a naturally and abundantly available biopolymer,on to activated alumina based on oil shale ash via crosslinking.The adsorbent was characterized by various techniques,such as Fourier transform infrared spectroscopy,scanning electron microscopy,thermogravimetric-differential thermal analysis,and X-ray photoelectron spectroscope.Batch isothermal equilibrium adsorption experiments were condcted to evaluate the adsorbent for the removal of Cu(Ⅱ) from wastewater.The effect of pH and agitation time on the adsorption capacity was also investigated,indicating that the optimum pH was 6.0.The equilibrium adsorp-tion data were correlated with Langmuir and Freundlich models.The maximum monolayer adsorption capacity of chitosan coated alumina sorbent as obtained from Langmuir adsorption isotherm was found to be 315.46 mg·g-1 for Cu(Ⅱ).The adsorbent loaded with Cu(Ⅱ) was readily regenerated using 0.1 mol?L?1 sodium hydroxide solution.All these indicated that chitosan coated alumina adsorbent not only have high adsorption activity,but also had good stability in the wastewater treatment process.     

Nickel(Ⅱ) removal from water using silica-based hybrid adsorbents:Fabrication and adsorption kinetics

A series of novel silica-based hybrid adsorbents were prepared by the crosslinking reaction of N-[3-(trimethoxysilyl)propyl] ethylene diamine(TMSPEDA) with epichlorohydrin(ECH) via a sol–gel process.Fourier transform infrared(FTIR) spectra confirmed that the reaction occurred.TGA curves showed that the thermal stability of these hybrid adsorbents reached as high as 180 °C.As a typical example,the adsorption performance of nickel(II) ions onto an adsorbent(the volume ratio of TMSPEDA and ECH was 4:1) was explored.It was found that the adsorption of nickel(II) ions onto this adsorbent followed the Lagergren pseudo-second-order kinetic model.The investigation of the adsorption mechanism demonstrated that nickel(II) adsorption was chiefly controlled by diffusion–chemisorption,suggesting that more diffusion processes were involved in the adsorption of nickel(II) ions onto this type of adsorbents.Desorption experiment indicates that these hybrid adsorbents can be regenerated.These findings reveal that this type of silica-based hybrid adsorbent is promising in the separation and recovery of nickel(II) ions from Ni-containing wastewater or contaminated water.     

Fabrication of chitosan microspheres for efficient adsorption of methyl orange

In this article, morphology, structure and size controllable chitosan microspheres with high mechanical strength were synthesized by microfluidic technology combining chemical crosslinking and used as an adsorbent for methyl orange. The synthesized adsorbents were characterized using scanning electron microscopy(SEM),Fourier transform infrared spectroscopy(FTIR), and an Energy Dispersive Spectrometer(EDS). The effect of pH revealed that the adsorption process depended on pH and the pH variation of methyl orange solution after adsorption indicated that adsorption capacity was affected through the associated role of chitosan nature and pH variation. Experimental results suggested that the as-prepared chitosan microspheres were controlled within a narrow size distribution(coefficients of variation is 1.81%), whose adsorption capacity reached to 207 mg·g~(-1) and mechanical strength was suitable to resist forces. In addition, the adsorption isotherm was well fitted with the Langmuir model, and the adsorption kinetic was best described by the pseudo-second-order kinetic model.The high performance microfluidic-synthesized chitosan microspheres have promising potentials in the applications of removing dyes from wastewater.     

Simultaneous removal of copper and zinc ions by low cost natural snail shell/hydroxyapatite/chitosan composite

In this work, the snail shell/hydroxyapatite/chitosan composite was prepared as adsorbent. The adsorption potential of the composite was studied for simultaneous sorption behavior of Zn(Ⅱ) and Cu(Ⅱ) ions in a batch system. Chitosan and hydroxyapatite(HAP) were extracted from shrimp shell and bone ash,respectively, so this is a low cost natural composite. To prepare the composite, chitosan was dissolved in acetic acid, then HAP and snail shell powders were added to the chitosan solution. The morphology and characterization of the composite was studied by SEM and EDX analysis. Atomic adsorption was used to measure the amount of the ions. Experimental parameters were optimized with Design Expert Software and five parameters such as the concentration of ions, p H, adsorbent amount and contact time were studied at room temperature. Optimized value for the parameters of Zn(Ⅱ) and Cu(Ⅱ) concentrations, p H, adsorbent dose, and contact time were 3.01 mg·L~(-1), 5.5, 0.02 g and 95 min, respectively. The adsorption isotherms for Zn(Ⅱ) and Cu(Ⅱ) showed Langmuir and Tempkin, respectively. Kinetic and equilibrium studies showed the experimental data of Zn(Ⅱ) and Cu(Ⅱ) ions were best described by the pseudo-second-order model. Studies on thermodynamic show the adsorption process were physical and spontaneous.     

菌丝体-甲壳素水处理剂对重金属离子吸附性能的研究

The adsorption properties of chitin adsorbent from mycelium of fermentation industries for the removal of heavy metal ions were studied.The result shows that the chitin adsorbent has high adsorption capacity for many heavy metal ions and Ni^2 in citric acid.The influence of pH was significant:When pH is higher than 4.0,the high adsorption capacity is obtained.otherwise H^ ion inhibits the adsorption of heavy metal ions.The comparison of the chitin adsorbent with some other commercial adsorbents was made,in which that the adsorption behavior of chitin adsorbent is close to that of commercial cation exchange adsorbents,and its cost is much lower than those commercial adsorbents.     

铈盐引发高吸附量氨基化PGMA高分子微球合成及去除废水中Cr(VI)(英文)

A novel polyglycidylmethacrylate(PGMA) microspheres with high adsorption capacity of Cr(VI) was prepared by cerium(IV) initiated graft polymerization of tentacle-type polymer chains with amino group on polymer microspheres with hydroxyl groups.The micron-sized PGMA microspheres were prepared by a dispersion polym-erization method and subsequently modified by ring-opening reaction to introduce functional hydroxyl groups.The polymer microspheres were characterized by scanning electron microscopy(SEM) and Fourier transform infrared spectroscopy(FTIR).The results indicated that the polymer microspheres had an average diameter of 5 μm with uniform size distribution.The free amino group content was determined to be 5.13 mmol?g?1 for g-PGMA-NH2 mi-crospheres by potentiometric and conductometric titration methods.The Cr(VI) adsorption results indicated that the graft polymerization of tentacle-type polymer chains on the polymer microspheres could produce adsorbents with high adsorption capacity(500 mg?g?1).The polymer microspheres with grafted tentacle polymer chains have poten-tial application in large-scale removal of Cr(VI) in aqueous solution.     

Ghezeljeh nanoclay as a new natural adsorbent for the removal of copper and mercury ions:Equilibrium,kinetics and thermodynamics studies

Heavy metal determination was carried out by applying the solid phase extraction (SPE) method in batch mode followed by atomic absorption spectroscopy (AAS) and inductively coupled plasma atomic emission spectrosco-py (ICP-AES) from aqueous solutions using Ghezeljeh montmoril onite nanoclay as a new natural adsorbent. The Ghezeljeh clay is characterized by using Fourier Transform Infrared (FT-IR) Spectroscopy, Scanning Electron Mi-croscopy–Energy Dispersive Spectrometry (SEM–EDS) and X-ray Diffractometry (XRD) and X-ray Fluorescence (XRF). The results of XRD and FT-IR of nanoclay confirm that montmoril onite is the dominant mineral phase. Based on SEM images of Ghezeljeh clay, it can be seen that the distance between the plates is Nano. The effects of varying parameters such as initial concentration of metal ions, pH and type of buffer solutions, amount of ad-sorbent, contact time, and temperature on the adsorption process were examined. The effect of various interfer-ing ions was studied. The adsorption data correlated with Freundlich, Langmuir, Dubinin–Radushkevich (D–R), and Temkin isotherms. The Langmuir and Freundlich isotherms showed the best fit to the equilibrium data for Hg(I ), but the equilibrium nature of Cu(II) adsorption has been described by the Langmuir isotherm. The kinetic data were described with pseudo-first-order, pseudo-second-order and double-exponential models. The adsorp-tion process follows a pseudo-second-order reaction scheme. Calculation ofΔG0,ΔH0 andΔS0 showed that the nature of Hg(II) ion sorption onto the Ghezeljeh nanoclay was endothermic and was favored at higher temper-ature, and the nature of Cu(II) ion sorption was exothermic and was favored at lower temperature.     

Faujasite zeolite decorated with cobalt ferrite nanoparticles for improving removal and reuse in Pb2+ ions adsorption

Water pollution caused by heavy metals ions has been gaining attention in recent years, increasing the interest in the development of methodologies for their efficient removal focusing on the adsorption process for these purposes. The current challenge faced by adsorption processes is the adequate adsorbent immobilization for removal and reuse. Thus, the present work aimed at producing a faujasite zeolite nanocomposite decorated with cobalt ferrite nanoparticles for Pb~(2+) ions adsorption in an aqueous medium improving magnetic removal and reuse.As a result, a high surface area(434.4 m~2·g~(-1)) for the nanocomposite and an 18.93 emu·g~(-1) saturation magnetization value were obtained, indicating magnetic removal in a promising material for adsorption process. The nanocomposite regeneration capacity evaluated by magnetic recovery after 24 h suspension presented a high Pb~(2+) ion adsorptive capacity(98.4%) in the first cycle. Around 98% of the Pb~(2+) ions were adsorbed in the second cycle. In this way, the synthesized faujasite:cobalt ferrite nanocomposite reveals itself as a promising alternative in adsorption processes, aiming at a synergic effect of FAU zeolite high adsorptive activity and the cobalt ferrite nanoparticles magnetic activity, allowing for adsorbent recovery from the aqueous medium via magnetic force and successive adsorptive cycles.     

Superior adsorption performance of graphitic carbon nitride nanosheets for both cationic and anionic heavy metals from wastewater

Water pollution caused by highly toxic Cd(II), Pb(II), and Cr(VI) is a serious problem. In the present work,a green and low-cost adsorbent of g-C_3N_4 nanosheets was developed with superior capacity for both cationic and anionic heavy metals. The adsorbent was easily fabricated through one-step calcination of guanidine hydrochloride with thickness less than 1.6 nm and specific surface area of 111.2 m~2·g~(-1). Kinetic and isotherm studies suggest that the adsorption is an endothermic chemisorption process, occurring on the energetically heterogeneous surface based on a hybrid mechanism of multilayer and monolayer adsorption. The tri-s-triazine units and surface N-containing groups of g-C_3N_4 nanosheets are proposed to be responsible for the adsorption process.Further study on pH demonstrates that electrostatic interaction plays an important role. The maximum adsorption capacity of Cd(II), Pb(II), and Cr(VI) on g-C_3N_4 nanosheets is 123.205 mg·g~(-1), 136.571 mg·g~(-1),and 684.451 mg·g~(-1), respectively. The better adsorption performance of the adsorbent than that of the recently reported nanomaterials and low-cost adsorbents proves its great application potential in the removal of heavy metal contaminants from wastewater. The present paper developed a promising adsorbent which will certainly find applications in wastewater treatment and also provides guiding significance in designing adsorption processes.     

Removal of chromium (Ⅵ) from aqueous solutions using quaternized chitosan microspheres

In this study, quaternized chitosan microspheres(QCMS) were prepared and its Cr(VI) removal potential was investigated. Batch experiments were conducted to examine kinetics, adsorption isotherm, p H effect,and thermodynamic parameters. Equilibrium was attained within 50 min and maximum removal of 97.34%was achieved under the optimum conditions at p H 5. Adsorption data for Cr(VI) uptake by the QCMS were analyzed according to Langmuir, Freundlich, and Temkin adsorption models. The maximum uptake of Cr(VI)was 39.1 mg·g~(-1). Thermodynamic parameters for the adsorption system were determinated at 293 K, 303 K,313 K and 323 K.(ΔH° = 16.08 k J·mol~(-1);ΔG° =- 5.84 to- 8.08 k J·mol~(-1)and ΔS° = 74.81 J·K~(-1)·mol~(-1)).So the positive values of both ΔH° and ΔS° suggest an endothermic reaction and increase in randomness at the solid–liquid interface during the adsorption. ΔG° values obtained were negative indicating a spontaneous adsorption process. The kinetic process was described by a pseudo-second-order rate equation very well. The results of the present study indicated that the QCMS could be considered as a potential adsorbent for Cr(VI) in aqueous solutions.     

Adsorption removal of o-nitrophenol and p-nitrophenol from wastewater by metal–organic framework Cr-BDC

In the present paper, a metal–organic framework Cr-BDC was prepared and used as adsorbent for adsorption of o-nitrophenol(ONP) and p-nitrophenol(PNP) from aqueous solutions. Cr-BDC was characterized by scanning electron microscopy, transmission electron microscope, X-ray diffraction and BET methods. The results indicate that Cr-BDC gets a very large specific surface area of 4128 m~2·g~(-1)and pore sizes are concentrated in 1 nm, which is a benefit for using for wastewater treatment. The influences of the adsorption conditions, such as temperature,solution concentration, adsorption time and reusability on adsorption performance were investigated. Cr-BDC exhibited an encouraging uptake capacity of 310.0 mg·g~(-1)for ONP, and adsorption capacity of Cr-BDC for ONP is significantly higher than that for PNP under suitable adsorption conditions. The characterizations of adsorption process were examined with the Lagergren pseudo-first-order, the pseudo-second-order kinetic model, and the intra-particular diffusion model. Kinetics experiments indicated that the pseudo-second-order model displayed the best correlation with adsorption kinetics data. Furthermore, our adsorption equilibrium data could be better described by the Freundlich equation. The results indicate that the as-prepared Cr-BDC is promising for use as an effective and economical adsorbent for ONP removal.     

以蔗糖飞灰吸附剂分离废水中的β-萘磺酸

Bagasse fly ash was converted into an inexpensive adsorbent and utilized for the removal of β-naphthalenesulfonic acid in dilute solution.The effect of pH,temperature,adsorbent concentration,and co-existed acids on the removal of β-naphthalenesulfonic acid was examined. The adsorption data have been correlated with both Lagnmuir and Freundlich adsorption models.Thermodynamic parameters obtained indicate the feasibility of the process,and kinetic studies provided the necessary mechanistic information of the removal process.     

磁性聚合物微球在Cr(VI)吸附分离中的应用(英文)

The magnetic poly-(methacrylate-divinyl benzene) microspheres with micron size were synthesized by modified suspension polymerization method.Adsorption of Cr(VI) from aqueous solution by magnetic poly-(MA-DVB) microspheres with surface amination was investigated.The adsorption processes were carried out under diversified conditions of pH value,adsorption time and temperature to evaluate the performance of the mag-netic microspheres.The optimum pH value for Cr(VI) adsorption was found as 3.The adsorption capacity increased with adsorption time and attained an optimum at 60 min.The adsorption processes for magnetic microspheres was endothermic reaction,and the adsorption capacity increased with increasing temperature.     

Synthesis,adsorption and selectivity of inverse emulsion Cd(Ⅱ) imprinted polymers

Inverse emulsion polymerization was employed to synthesize inverse emulsion Cd(II) imprinted polymers(IEII P). The morphology and functional groups of IEIIP were characterized by SEM,FTIR and TG. Static adsorption experiments and competitive adsorption test were used to evaluate the adsorption ability of IEIIP. The adsorption capacity of polymers could reach 86.7 mg·g~(-1) under the optimal adsorption conditions. The pseudo second order kinetic model and Langmuir isotherm model could be used to analyze the experimental data well. The adsorption process of IEIIP was chemical adsorption process and monomolecular type. Thermodynamic parameters showed that the adsorption process was endothermic and could occur spontaneously. The selectivity coefficients k of Cd~(2+)/Pb~(2+), Cd~(2+)/Zn~(2+) and Cd~(2+)/Cu~(2+) were 2.4998, 1.2437 and 4.6882, respectively. The proposed method provides a new thought for removing Cd(II) in water samples.     

超声辅助合成磁性四氧化三铁/氧化石墨烯复合物及其在染料去除中的应用（英文）

A simple ultrasound-assisted co-precipitation method was developed to prepare ferroferric oxide/graphene oxide magnetic nanoparticles (Fe3O4/GO MNPs). The hysteresis loop of Fe3O4/GO MNPs demonstrated that the sample was typical of superparamagnetic material. The samples were characterized by transmission electron microscope, and it is found that the particles are of small size. The Fe3O4/GO MNPs were further used as an adsorbent to remove Rhodamine B. The effects of initial pH of the solution, the dosage of adsorbent, temperature, contact time and the presence of interfering dyes on adsorption performance were investigated as well. The adsorption equilibrium and kinetics data were fitted well with the Freundlich isotherm and the pseudo-second-order kinetic model respectively. The adsorption process followed intra-particle diffusion model with more than one process affecting the adsorption of Rhodamine B. And the adsorption process was endothermic in nature. Furthermore, the magnetic composite with a high adsorption capacity of Rhodamine B could be effectively and simply separated using an external magnetic field. And the used particles could be regenerated and recycled easily. The magnetic composite could find potential applications for the removal of dye pollutants.