Adsorption of Cd(II), Zn(II) by extracellular polymeric substances extracted from waste activated sludge

Adsorption of Cd(II) and Zn(II) ions in single solutions using extracellular polymeric substances (EPS) from activated sludge was investigated. Langmuir and Freundlich models were applied to describe metal adsorption. The results showed that EPS was an effective adsorbent for the zinc and cadmium ions from aqueous solution. The equilibrium metal uptake was increased with increasing the initial concentration of metal ion. Constants calculated from isotherms model showed that the maximum uptake capacity of cadmium was estimated to be 45 mg/g of Cd(II) and 80 mg/g of Zn(II). Both Langmuir and Freundlich isotherms were suitable for describing adsorption of Cd(II) by EPS, while the Langmuir isotherm equation fit the date of Zn(II) adsorption better, indicating that EPS adsorb Cd(II) and Zn(II) by different mechanisms.Analysis of FTIR spectra demonstrated that C-O-C of polysaccharides at 1,150-1,030 cm(-1), group of the amide(I), CH(2) group of the lipids, carboxyl and -OH groups of proteins and polysaccharides were involved in cadmium and zinc binding, of which the -OH groups and the C-O-C group of polysaccharides.     

Use of sesame stalk biomass for the removal of Ni(II) and Zn(II) from aqueous solutions

In this study an agricultural residue, sesame stalk, was evaluated for the removal of Ni(II) and Zn(II) metal ions from aqueous solutions. Biosorption studies were carried out at different pH, biosorbent dosage, initial metal ion concentrations, contact time, and solution temperature to determine the optimum conditions. The experimental data were modeled by Langmuir, Freundlich, Dubinin-Radushkevich (D-R) and Temkin isotherm models. Langmuir model resulted in the best fit of the biosorption data. The pseudo-first-order and pseudo-second-order kinetic models were used to describe the kinetic data and to evaluate rate constants. The best correlation was provided by the second-order kinetic model. The thermodynamic parameters such as ΔG°, ΔH° and ΔS° were calculated for predicting the nature of adsorption. The experimental results showed that sesame stalk can be used as an effective and low-cost biosorbent precursor for the removal of heavy metal ions from aqueous solutions.     

Application of mulch for treating metals in urban runoff: batch and column test.

Among the many methods available for the removal of heavy metals in urban nonpoint source pollution (NSP), adsorption has been shown to be an economically feasible alternative. To adsorb the amount of heavy metals in runoff, filtration of runoff through a specially constructed filter system is one possible treatment method. The mulch layer in a specially constructed filter system functions through adsorptive-filtration, where some pollutants are immobilised through sorption and some pollutants associated with suspended solids are immobilised through filtration. Therefore, the major interest of this study was to investigate the possibility of utilising mulch for the adsorption of heavy metals such as cadmium, copper, lead and zinc for a solution typical of those found in urban runoff using the flask-type adsorption batch tests and laboratory column tests. From the equilibrium sorption batch tests, it was observed that the adsorption of heavy metals on mulch with the same initial concentrations of metals in the solution decreased in the order Pb(II) > Cu(II) > Zn(II) > Cd(II) regardless of changes in pH. In column tests, the breakthrough curves for various heavy metals' adsorption by mulch showed that the binding strength of the following metal ions onto mulch was as follows: Pb(II) > Cu(II) > Zn(II) > Cd(II).     

The sorption of lead, cadmium, copper and zinc ions from aqueous solutions on a raw diatomite from Algeria

The adsorption of Cu(2+), Zn(2+), Cd(2+) and Pb(2+) ions from aqueous solution by Algerian raw diatomite was studied. The influences of different sorption parameters such as contact pH solution, contact time and initial metal ions concentration were studied to optimize the reaction conditions. The metals ions adsorption was strictly pH dependent. The maximum adsorption capacities towards Cu(2+), Zn(2+), Cd(2+) and Pb(2+) were 0.319, 0.311, 0.18 and 0.096 mmol g(-1), respectively. The kinetic data were modelled using the pseudo-first-order and pseudo-second-order kinetic equations. Among the kinetic models studied, the pseudo-second-order equation was the best applicable model to describe the sorption process. Equilibrium isotherm data were analysed using the Langmuir and the Freundlich isotherms; the results showed that the adsorption equilibrium was well described by both model isotherms. The negative value of free energy change ΔG indicates feasible and spontaneous adsorption of four metal ions on raw diatomite. According to these results, the high exchange capacities of different metal ions at high and low concentration levels, and given the low cost of the investigated adsorbent in this work, Algerian diatomite was considered to be an excellent adsorbent.     

Removal of copper(II) and cadmium(II) ions from aqueous solutions by biosorption onto pine cone

In this study, the removal of copper(II) and cadmium(II) ions from aqueous solutions by biosorption onto pine cone was studied. Variables that affect the biosorption process such as pH, biosorbent dosage, initial metal ion concentration, contact time and temperature of solution were optimized. Experimental data were fitted to Langmuir, Freundlich, Dubinin Radushkevich and Temkin isotherm models to investigate the equilibrium isotherms. Pseudo-first-order, pseudo-second-order and intraparticle diffusion kinetic models were used to determine the biosorption mechanism. The thermodynamics of biosorption were studied for predicting the nature of biosorption. Experimental results showed that pine cone could be evaluated as an alternative precursor for removal of heavy metal ions from aqueous solutions, due to its high biosorption capacity, availability, and low cost.     

Removal of dissolved copper(II) and zinc(II) by aerobic granular sludge.

This study investigated the adsorption kinetics of dissolved copper(II) and zinc(II) by aerobic granular sludge. Two series of batch experiments were conducted at different initial copper(II), zinc(II) concentrations (Co) and initial granule concentrations (Xo). Results showed that the biosorption kinetics of individual copper(II) and zinc(II) by aerobic granules were closely related to Co and Xo. The maximum biosorption capacity of individual copper(II) and zinc(II) by aerobic granules was 246.1 mg g(-1) and 180 mg g(-1), respectively. In order to theoretically interpret the results obtained, two kinetic models previously developed for biosorption were employed and compared in this study. It was found that the model proposed by Liu et al. (2003) could fit the experimental data very well, but the second-order model failed to fit the data in some cases. It appears that aerobic granules would be potential biosorbent with high efficiency for the removal of dissolved copper(II) and zinc(II) from wastewater.     

Poly(acrylic acid) modifying bentonite with in-situ polymerization for removing lead ions

In this paper, a new kind of poly(acrylic acid) modified clay adsorbent, the poly(acrylic acid)/bentonite composite (PAA/HB) was prepared by in-situ polymerization, and utilized to remove lead(II) ions from solutions. The maximum adsorption of adsorbent is at pH 5 for metal ions, whereas the adsorption starts at pH 2. The effects of contact time (5-60 min), initial concentration of metal ions (200-1,000 mg/L) and adsorbent dosage (0.04-0.12 g/100 mL) have been reported in this article. The experimental data were investigated by means of kinetic and equilibrium adsorption isotherms. The kinetic data were analyzed by the pseudo-first-order and pseudo-second-order equation. The experimental data fitted the pseudo-second-order kinetic model very well. Langmuir and Freundlich isotherms were tried for the system to better understand the adsorption isotherm process. The maximal adsorption capacity of the lead(II) ions on the PAA/HB, as calculated from the Langmuir model, was 769.2 mg/g. The results in this study indicated that PAA/HB was an attractive candidate for removing lead(II) (99%).     

Pleurotus ostreatus spent mushroom compost as green biosorbent for nickel (II) biosorption

The potential of Pleurotus ostreatus spent mushroom compost (PSMC) as a green biosorbent for nickel (II) biosorption was investigated in this study. A novel approach of using the half-saturation concentration of biosorbent to rapidly determine the uptake, kinetics and mechanism of biosorption was employed together with cost per unit uptake analysis to determine the potential of this biosorbent. Fifty per cent nickel (II) biosorption was obtained at a half-saturation constant of 0.7 g biosorbent concentration, initial pH in the range of 4-8, 10 min contact time, 50 mL 50 mg/L nickel (II) initial concentration. The experimental data were well fitted with the Langmuir isotherm model and the maximum nickel (II) biosorption was 3.04 mg/g. The results corresponded well to a second pseudo order kinetic model with the coefficient of determination value of 0.9999. Based on FTIR analysis, the general alkyl, hydroxyl or amino, aliphatic alcohol and carbonyl functional groups of biosorbent were involved in the biosorption process. Therefore, biosorption of nickel (II) must involve several mechanisms simultaneously such as physical adsorption, chemisorption and ion exchange. Cost comparison for PSMC with Amberlite IRC-86 ion exchange resin indicates that the biosorbent has the potential to be developed into a cost effective and environmentally friendly treatment system.     

Removal of As(V) and As(III) from water with a PEI-modified fungal biomass.

A novel biosorbent was prepared by chemically grafting polyethylenimine (PEI) on the fungal biomass of Penicillium chrysogenum through a two-step reaction. The PEI-modified biomass was found to possess zero zeta potential at pH 10.4. Owing to the protonation of amine groups on the biosorbent surface, the biosorbent is favourable for the removal of anionic arsenic species in water. The sorption capacity for As(V) at pH 3 increased by 5.7-fold after surface modification. The sorption performances including kinetics and isotherm were investigated and several models were used to describe the experimental data. The pseudo-second-order model described the kinetic data better, while the Langmuir equation was the better model to fit the isotherm data. The corresponding thermodynamic parameters for As(V) and As(III) sorption were also calculated.     

Biosorption of lead(ll) and copper(ll) from stormwater by brown seaweed Sargassum sp.: batch and column studies.

This study evaluated the potential use of brown seaweed Sargassum sp to sequester lead and copper (Pb(II) and Cu(ll)) from urban runoff based on batch as well as column experiments. The equilibrium data exhibited Langmuir isotherms. The adsorption capacity of this seaweed was found to be 196.1 mgg(-1) and 84.0 mg g(-1) for Pb(ll) and Cu(ll), respectively, which are in good agreement with those values obtained for the aqueous solution (188.6 mg g(-1) for Pb(ll) and 86.9 mg g(-1) for Cu(II)). The functional group analysis of the seaweed using FTIR demonstrated that the carboxyl functional groups are mainly responsible for biosorption. The cation exchange capacity of the biosorbent was 2.25 meq/g. This observation suggested that ion exchange mechanism is predominantly responsible for the metal ion uptake. The column study showed that the highest bed height and the lowest flow rate result in a substantial enhancement of the metals uptake with the biosorption uptake capacities being 264.3 mg Pb(ll) g(-1) and 86.0 mg Cu(ll) g(-1). In the binary system, the biosorption capacity was observed to be 208.7 mg Pb(ll) g(-1) and 61.0 mg Cu(II) g(-1). The predicted breakthrough curves by the Thomas adsorption model gave a good fit of the experimental data with r2 ranging from 0.92 to 0.99.     

Sorption behavior of florisil for the removal of antimony ions from aqueous solutions

Florisil was employed for the sorption of antimony ions from aqueous solutions. A detailed study of the process was performed by varying the sorption time, pH, and temperature. The sorption was found to be fast, equilibrium was reached within 15 min. Moreover, a maximum sorption has been achieved from solution when the pH ranges between 1-10. From kinetic experiments it follows that the process correlate with the second-order kinetic model. The overall rate process appears to be influenced by both boundary layer diffusion and intra-particle diffusion. The Langmuir and Dubinin-Radushkevich (D-R) type sorption isotherms can be applied to fit and interpret the sorption data. The mean energy of adsorption (9.73 kJ mol(-1)) was calculated from the Dubinin-Radushkevich (D-R) adsorption isotherm at room temperature. Furthermore, the thermodynamic parameters for the sorption were also determined, and the deltaH0 and deltaG0 values indicate a spontaneous endothermic behavior.     

Ion exchange selectivities of calcium alginate gels for heavy metals.

An equilibrium model has been proposed and verified, based on the conditions in the gel phase and Donnan equilibrium theory, for the analysis of the experimental data on the recovery of lead, copper, cadmium, cobalt, nickel and zinc from synthetic, nonmetallic aqueous solutions on calcium alginate gels. This equilibrium model considers that the system behaves as an ion-exchange process between the calcium in the gels and the divalent metals in solution, and that the metallic portion enclosed in gel fluid is supposed an important quantitative contribution to the total amount of metal uptake by gels. According to the equilibrium constants calculated, it is deduced that the selectivity order is: Pb > Cu > Cd > Ni > Zn > Co.     

Removal of copper(II) from aqueous solution using chemically modified fruit peels as efficient low-cost biosorbents

Fruit peels, which are common agricultural byproducts, have been extensively used as abandoned or low-cost biosorbents to remove heavy metals. In this study, dragon fruit peel (DFP), rambutan peel (RP), and passion fruit peel (PFP) were used to remove Cu(II) ions from an aqueous solution. Concentrations of the adsorbed metal ions were determined using the atomic absorption spectroscopic method. Adsorption experiments were performed with different adsorbent dosages, pH values, contact times, and initial copper concentrations. The optimum set of conditions for biosorption of Cu(II) ions was found to be an adsorbent dosage of 0.25 g, a contact time of 180 min, an initial concentration of 100 mg/L, a pH value of 4 for RP and PFP, and a pH value of 5 for DFP. The adsorption conformed with the pseudo-second-order kinetic model. The adsorption data were consistent with the Langmuir and Freundlich isotherm models, but the best fit was with the Langmuir model. The Langmuir monolayer adsorption capacity values of DFP, RP, and PFP were calculated to be 92.593, 192.308, and 121.951 mg/g, respectively. RP showed a higher adsorption capacity of Cu(II) ions than PFP and DFP for all parameters. The results indicate that these biosorbents might be used to effectively adsorb Cu(II) ions from wastewater treatment plants.     

Removal of lead(II) and copper(II) from aqueous solution using foitite from Linshou mine in Hebei, China

Foitite from Linshou mine in China's Hebei province was investigated as an adsorbent to remove Pb(II) and Cu(II) from aqueous solution. The results showed that foitite can readily remove heavy metal ions from aqueous solution. The data shows that the metal uptake for Pb(II) increases rapidly, accounting for 74.47% when contact time was 2 min. In contrast to Pb(ll), there was a worse capability for adsorption of Cu(II). In the first 4 min, the metal uptake accounted for 34.7%. According to the analytical results obtained from X-ray diffraction, laser Raman spectrum, X-ray energy dispersive spectrometer, and Zeta potential, the removal mechanism of Pb(II) and Cu(II) by using foitite can be explained as following: firstly, the existence of an electrostatic field around foitite particles can attract heavy metal ions and consequently combine heavy metal ions with OH; secondly, heavy metal ions in the solution are exchanged with the Fe3+ and Al3+ in the foitite.     

Chromate sorption and reduction kinetics onto an aminated biosorbent.

A novel biosorbent was prepared by chemically grafting of polyethylenimine (PEI) onto the fungal biomass of Penicillium chrysogenum through a two-step reaction. The modified biosorbent is favorable for the removal of anionic Cr(VI) species from aqueous solution due to the protonation of amine groups on the biomass surface. The sorption capacity for Cr(VI) increased by 7.2-fold after surface modification. Sorption kinetics results show that the pseudo-second-order kinetic model described the experimental data well. During the sorption process, X-ray photoelectron spectroscopy (XPS) was used to analyze the chromium species on the biosorbent surface and the results indicate that part of the Cr(VI) ions were reduced to Cr(III) ions which can be chelated with the amine groups on the biomass surface. The reduced Cr(III) ions formed some aggregates on the surface at higher solution pHs.     

Pb(II) biosorption on reed biosorbent derived from wetland: effect of pretreatment on functional groups.

Reed biomass harvested from wetland constructed for water purification was modified into a biosorbent for Pb(ll) removal from aqueous solution. The enhancement of Pb(ll) adsorption by reed biosorbent depended not only on the types of reagent used for pretreatment, but also on the pH during the pretreatment process. The mechanisms, as elucidated using relational data obtained from Boehm titration, Fisher esterification and FTIR, involved the conversion of carboxylic groups into carboxylate groups, and proved the role of the carboxylate group, which occupied more than 80% in binding Pb(ll). The Langmuir sorption isotherm of Pb(ll) by R-NaOH-12 showed QO, and b values of 0.082 mmol/g and 312.5 g/mmol, suggesting enough adsorption performance to reduce the concentration of Pb(ll) to meet the range of WHO guidelines. The salinity of aqueous solution containing NaH2PO4 and NaN03 promoted the adsorption of Pb(ll), while NaCl and Na2SO4 suppressed the adsorption capacity of Pb(ll). The adsorption mechanism of reed biosorbent provides valuable insight on the pretreatment effects and the advantages of utilizing this plant as biosorbent for Pb(ll) and other heavy metals.     

Cu2+对凤眼莲根系吸附四环素的影响及机理

以凤眼莲根系为生物吸附材料,通过批吸附平衡实验,考察Cu~(2+)共存条件下凤眼莲根系吸附四环素(tetracycline,TC)的动力学特性和吸附等温线,并结合傅里叶红外光谱(Fourier infrared spectroscopy,FTIR)和基团屏蔽技术分析Cu~(2+)对凤眼莲根系吸附TC特征的影响及机理。结果表明:共吸附动力学和吸附热力学分别符合准二级动力学模型和Freundlich等温吸附模型。随着共存Cu~(2+)浓度的增加,凤眼莲根系对TC的吸附量和去除率也逐渐增大。凤眼莲根系表面羧基、氨基经化学屏蔽后,对TC的吸附量均降低了20%~30%;结合FTIR技术确定Cu~(2+)通过与凤眼莲根系表面的活性官能团(羟基、羧基和氨基以及芳环结构等)发生相互作用,在根系与TC之间形成架桥,从而促进了根系对TC的吸附。     

Adsorption of Zn(II) on dialdehyde m-phenylenediamine starch

A new chelating material dialdehyde m-phenylenediamine starch (DASMPA) was synthesized by reacting m-phenylenediamine with dialdehyde starch. The obtained material was characterized by element analysis and Fourier transform infrared (FT-IR) spectra. The FT-IR of DASMPA showed an absorption peak at 1605.95 cm(-1) indicating the formation of a Schiff base (C=N). Adsorption activity of DASMPA for Zn(2+) was also investigated in terms of contact time, pH, the initial Zn(II) concentration and temperature, the results revealed that pH = 5, t = 1 h were the optimal conditions. With the degree of substitution (DS) of the DASMPA increased, the adsorption capacity increased gradually. The adsorption equilibrium data correlated well with Freundlich isotherm. Moreover, lower temperature was preferable for the process as it was exothermic.     

Removal of Cu(II) ions from aqueous solutions using N-carboxymethyl chitosan

N-carboxymethyl chitosan (NCMC) was synthesized by reacting chitosan with chloroacetic acid in water under triethylamine (Et(3)N) as catalyst. The chemical structures of NCMC were characterized by Fourier transform infrared (FT-IR) and hydrogen-1 nuclear magnetic resonance ((1)H-NMR) spectroscopy and confirmed that carboxymethylation occurred on the amino groups. Samples of NCMC were used for removal of Cu(II) from aqueous solution. The effects of degree of substitution of NCMC, initial pH value and adsorption kinetics on the adsorption were studied. Adsorption experiments showed that NCMC has a high adsorption speed and high adsorption capacity for remove Cu(II) from aqueous solution. The adsorption kinetics data were best fitted with the pseudo-second-order model. The experimental equilibrium data of Cu(II) on the NCMC were both fitted to the Langmuir model and Freundlich model, which revealed that the maximum capacity for monolayer saturation was 147.93 mg/g.     

Spatial and seasonal variations and ecotoxicological significance of sediment trace metal concentrations in Kebir-Rhumel basin (Northeast of Algeria)

This study sought to assess sediment contamination by trace metals (cadmium, chromium, cobalt, copper, manganese, nickel, lead and zinc), to localize contaminated sites and to identify environmental risk for aquatic organisms in Wadis of Kebir Rhumel basin in the Northeast of Algeria. Water and surficial sediments (0-5 cm) were sampled in winter, spring, summer and autumn from 37 sites along permanent Wadis of the Kebir Rhumel basin. Sediment trace metal contents were measured by Flame Atomic Absorption Spectroscopy. Trace metals median concentrations in sediments followed a decreasing order: Mn > Zn > Pb > Cr > Cu > Ni > Co > Cd. Extreme values (dry weights) of the trace metals are as follows: 0.6-3.4 microg/g for Cd, 10-216 microg/g for Cr, 9-446 microg/g for Cu, 3-20 microg/g for Co, 105-576 microg/g for Mn, 10-46 microg/g for Ni, 11-167 microg/g for Pb, and 38-641 microg/g for Zn. According to world natural concentrations, all sediments collected were considered as contaminated by one or more elements. Comparing measured concentrations with American guidelines (Threshold Effect Level: TEL and Probable Effect Level: PEL) showed that biological effects could be occasionally observed for cadmium, chromium, lead and nickel levels but frequently observed for copper and zinc levels. Sediment quality was shown to be excellent for cobalt and manganese but medium to bad for cadmium, chromium, copper, lead, nickel and zinc regardless of sites.