Experimental investigation on large deflection response of a frame impacted by a moving body

This paper reports on the experimental investigation of the dynamic large deflection response of a portal frame impacted at its midspan by a body moving at a certain speed. Both the deflection and velocity vs. time curves of the midspan and the dynamic history of a number of desired locations were recorded during the process of response. On the basis of the test data, the momentum and kinetic energy conversion between the frame and the moving body in the impact process are realized, and the occurrence and expansion of plastic regions are described. Investigation results show that the initial collision is approximately ideally inelastic, and that the elastic deformation plays a considerable role in the response though the input energy is much larger than the maximum elastic energy capacity of the beam member; therefore, in a general impact, the energy ratio should not be regarded as a sufficient criterion for a rigid—plastic solution. The ratios of the impulse transferred to and the energy absorbed by the frame in the initial collision to that carried by the moving body before impact is only related to the ratiobetween the equivalent mass of the frame paticipating in the initial collision and the mass of the impacting body, having nothing to do with the impacting velocity to a certain extent.     

Phase Transformation of Nanosized Zirconia

1 INTRODUCTION Without introduction of any stabilizing reagent, mesoporous zirconia was prepared via solid state re- action-structure directed method, which broke through the traditional preparation route (liquid reaction)[1]. Using this novel method, the samples possess not only mesoporous structure, but also nano-size. Normal size zirconia has three kinds of crys- talline phases: monoclinic phase existing at room tem- perature, tetragonal phase stabilizing between 1170～2370 ℃ and cubi…     

纳米二氧化锆在甲醇合成催化剂Cu/Ga2O3/ZrO2中的作用

The introduction of mesoporous nanosize zirconia to the catalyst for methanol synthesis dedicates the nanosized catalyst and mesoporous duplicated properties. The catalyst bears the larger surface area, larger mesoporous volume and more uniform diameter, more surface metal atoms and oxygen vacancies than the catalyst prepared with the conventional coprecipitation method. The modification of microstructure and electronic effect could result in the change of the reduced chemical state and decrease of reducuction temperature of copper, donating the higher activity and methanol selectivity to the catalyst. The results of methanol synthesis demonstrate that the Cu^＋ is the optimum active site. Also, the interaction between the copper and zirconia shows the synergistic effect to fulfil the methanol synthesis.     

电喷雾串联质谱分析附子炮制中的化学成分变化

利用电喷雾质谱方法(ESI-MS)分析了附子加辅料(甘草)炮制前后水煎液中二萜类生物碱在种类和含量方面的变化,通过加入内标化合物,建立了电喷雾质谱的半定量分析方法。此方法具有快速、准确、灵敏的特点,能够更加全面地反映中药配伍炮制过程中多种化学成分的含量变化,并能根据电喷雾串联质谱的分析结果鉴定配伍后产生的新的化学成分,在共煎液中的次乌头碱、中乌头碱和乌头碱的相对含量分别是单煎液中的5.67%、4.05%和4.88%。通过研究附子与甘草的单煎液、共煎液以及药渣中化学成分的变化,揭示了甘草作为辅料,在炮制过程中对附子减毒作用机理。     

超级活性炭的合成及活化反应机理

以石油焦为原料,采用碱熔活化法合成出具有超高比表面的超级活性炭.借助XRD、TG DTA、N2吸附实验等手段,对其结构与性能进行了表征.同时,设计原位TG DTA测试技术、反应快速终止技术,对超级活性炭合成机理进行了考察,提出了两段活化反应机理,即中温径向活化机理和高温横向活化机理.发现K2O、－O－K＋以及－CO－2K＋是径向活化为主的中温活化段的活化剂活性组分,而处于熔融状态的K＋O－、K＋则是横向活化为主的高温活化段的催化活性组分.并发现径向活化是超级活性炭形成发达微孔分布的主要途径,也是控制超级活性炭微孔分布的主要手段.而高温横向活化机理则是导致超级活性炭形成大孔的主要途径.高温横向活化与中温径向活化一起构成石油焦基超级活性炭形成的主要机理.     

Tighter Monogamy and Polygamy Relations of Quantum Entanglement in Multi-qubit Systems

International Journal of Theoretical Physics - We investigate the monogamy relations related to the concurrence, the entanglement of formation, convex-roof extended negativity, Tsallis-q...     

碳模板诱导生长Fe-Nx活性位点

能源危机和环境恶化是当今社会面临的巨大挑战. 燃料电池作为一种高效、清洁的发电装置,受到了社会各界特别是新能源行业的高度关注. 尤其是, 日本丰田推出Mirai燃料电池汽车量产上市计划, 把燃料电池及其关键技术发展推向了一个新的发展纪元. 然而, 制约燃料电池走向大规模商业化的核心问题依然是其综合性能不具竞争力. 其中, 氧电极的缓慢动力学以及贵金属Pt的有限资源、高昂成本等是关键所在, 因此, 亟待实现高性能非贵金属催化剂的突破.近年来, 大量研究表明, Fe-Nx掺杂的碳催化剂具有极大的代Pt潜力, 研究者们尝试各种手段进行开发,如: 调控Fe化合物及N前驱体的类型与添加量, 改变温度、压力等合成条件, 采用轴向配位体连接、共价接枝、球磨等非热解路线, 构建核壳、有序介孔碳、阵列、类石墨烯薄片、多孔碳等碳纳米结构, 制备石墨烯/碳纳米管、石墨烯/碳黑、碳纳米带/碳纳米管、碳纳米颗粒/碳纤维、碳球/碳纳米管/石墨烯等复合材料, 进行酸洗、造孔、二次加热等后处理, 调控不同类型Fe物种相生成等. 此外, EXAFS及M?ssbauer等谱学技术已经证实Fe-Nx特别是Fe-N4为强活性位点. 因此, 有待提出合理策略以促进非贵金属碳催化剂中Fe-Nx强活性位点的高密度掺杂.本文提出了一种碳模板诱导Fe-Nx活性位点生长的方法即通过高温热解含有Fe盐的三聚氰胺前驱体混合物, 成功制备 了Fe-Nx掺杂的碳催化剂, 并结合多种表征技术证实了碳模板对制备碳催化剂结构组成及电化学性能的影响. 形貌结果说明, 碳模板的引入有利于Fe、N化合物的均匀吸附以至于Fe基纳米颗粒的均一成核, 促使竹状碳纳米管在碳模板表面以及中间均一生长; 氮气吸脱附及孔径分布曲线显示, 引入碳模板形成的复合材料较单一的碳纳米管和碳黑材料具有提高的比表面积和总孔体积, 说明复合材料中存在两种单体的有效协同; M?ssbauer、XPS及XRD测试数据证实, 碳模板可以调控Fe、N两种元素的耦合方式, 能够抑制金属Fe和Fe碳化物等非活性Fe物种的生成、诱导Fe-N4和其它Fe氮化物等强活性Fe-Nx物种的生长. 电化学测试数据表明, 复合材料具有提升的面积活性和质量活性, 且TOF值明显提高, 说明碳模板的引入增强了Fe-Nx位点的本征活性; 此外, 复合材料的氧还原过程为高效的4e-途径, 且较商业Pt/C催化剂表现出了优异的循环稳定性和甲醇耐受性.     

Adsorption of bulky molecules of nonylphenol ethoxylate on ordered mesoporous carbons

Ordered mesoporous carbons (OMCs) with varying pore sizes were prepared using ordered mesoporous silica SBA-15 as hard templates. The OMCs possess abundant mesopores with narrow pore size distribution, on which the adsorption behavior of bulky molecules of nonylphenol ethoxylate (NPE) were investigated. The isotherms of NPE on OMCs can be fitted by Langmuir adsorption model, evidenced by the adsorption data. The surface area of the pores larger than 1.5 nm is a crucial factor to the adsorption capacity of NPE, whereas the most probable pore diameter of OMCs is crucial to the adsorption rate of NPE. The adsorption temperature has more significant effects on adsorption rate than the adsorption capacity. Theoretical studies show that the adsorption kinetics of NPE on OMCs can be depicted with the pseudo-second-order kinetic model. In addition, thermodynamic parameters of adsorption were evaluated based on the equilibrium constants related to the equilibrium of adsorption at different temperatures.     

The Categorification of Fermions

In this paper, we lift Fermions to functors acting on some homotopy category by the Boson–Fermion correspondence and get the categorified relations of Fermions. In this way, both the categorified Bosons and the categorified Fermions can be viewed as functors on the same category. We also give actions of these functors on the charged Young diagrams(or equivalently, Maya diagrams), so that the classical theory of Boson–Fermion correspondence is very well recovered as a result of such a categorification.