基于高介电常数基板和金属结构负折射材料的设计,仿真与验证

通过将单回路镜像对称开口金属环结构印制在高介电常数基板上,实现了一种金属含量比传统负折射材料更少,"双负"通带比全介质负折射材料更宽的负折射材料.分析了高介电常数基板产生负介电常数以及"双负"通带形成的机理,通过仿真实验分析了影响"双负"通带的因素.通过制作样品验证了这一机理实现"双负"的可行性,理论分析与实验结果都表明这种方法可实现较宽频段内的"双负"通带. 关键词： 负折射材料 负介电常数 负磁导率 介质谐振器原理     

Dual-band frequency selective surface with quasi-elliptic bandpass response

Based on the substrate integrated waveguide technology,we present a dual-band frequency selective surface(FSS) with a quasi-elliptic bandpass response.The characteristics of the quasi-elliptic bandpass response are realized by shunting two substrate integrated waveguide cavities of different sizes,with the same slots on both sides of the metal surfaces.Four cavities of different sizes and two slots of different sizes are used to design the novel FSS.Every bandpass response with sharp sidebands is induced by two transmission nulls that are generated by the coupling between the slot aperture resonance and the cavity resonance.The simulation results show that such dual-band FSS has the advantages of high selectivity and stable performance at different oblique incident angles.Moreover,it is easy to fabricate.     

极薄宽角度平面超材料吸波体仿真与实验验证

仿真和实验验证了厚度极薄的平面结构超材料吸波体, 该吸波体采用加载交指电容的耶路撒冷十字结构, 通过增加单元间的耦合电容显著降低了其工作频率. 测试结果表明, 该超材料吸波体在1.58 GHz, 吸收率峰值为88.48%, 其厚度为2 mm, 约为1/95工作波长, 吸波体的单元尺寸为11 mm, 约为1/17工作波长. 此外, 通过金属通孔将耶路撒冷十字结构与金属底板相连接, 使其对斜入射横电和横磁极化电磁波具有宽角度吸收特性, 在60°时依然具有较高的吸收率, 且吸收峰频率几乎不发生偏移, 从而使其更具实用价值. 关键词： 极薄 宽角度 超材料吸波体     

单电子晶体管与金属氧化物半导体混合电路构造的一维离散混沌系统研究

基于单电子晶体管与金属氧化物半导体混合结构构造出一种一维离散混沌系统. 研究了单电子晶体管与金属氧化物半导体串联混合结构的电压传输特性,并建立了相应的N型分段线性函数模型. 基于该模型实现了一维离散映射系统,分析了它的一维映射过程、分岔图和Lyapunov指数谱等动力学特性. 最后利用单电子晶体管与金属氧化物半导体混合电路设计出该离散混沌系统的电路结构,仿真验证与理论分析一致. 研究结果表明,利用单电子晶体管与金属氧化物半导体混合结构设计的离散混沌电路不仅结构非常简单,功耗很低, 而且有利于混沌系统的集成和应用.     

All-dielectric left-handed metamaterial based on dielectric resonator: design, simulation and experiment

Dipoles with Lorentz-type resonant electromagnetic responses can realise negative effective parameters in their negative resonant region. The electric dipole and magnetic dipole can realise, respectively, negative permittivity and negative permeability, so both the field distribution forms of electric and magnetic dipoles are fundamentals in designing left-handed metamaterial. Based on this principle, this paper studies the field distribution in high-permittivity dielectric materials. The field distributions at different resonant modes are analysed based on the dielectric resonator theory. The origination and influence factors of the electric and magnetic dipoles are confirmed. Numerical simulations indicate that by combining dielectric cubes with different sizes, the electric resonance frequency and magnetic resonance frequency can be superposed. Finally, experiments are carried out to verify the feasibility of all-dielectric left-handed metamaterial composed by this means.     

Dual-band frequency selective surface with large band separation and stable performance

A new technique of designing a dual-band frequency selective surface with large band separation is presented.This technique is based on a delicately designed topology of L-and Ku-band microwave filters.The two band-pass responses are generated by a capacitively-loaded square-loop frequency selective surface and an aperture-coupled frequency selective surface,respectively.A Faraday cage is located between the two frequency selective surface structures to eliminate undesired couplings.Based on this technique,a dual-band frequency selective surface with large band separation is designed,which possesses large band separation,high selectivity,and stable performance under various incident angles and different polarizations.     

一种极化不敏感和双面吸波的手性超材料吸波体

基于手性结构设计了一种极化不敏感和双面吸波的超材料吸波体.该吸波体的结构单元由手性结构和介质基板组成.仿真的电磁波正、反向入射时超材料吸波体的吸收率表明:该吸波结构的正、反面是互易的,具有双面吸波特性.仿真的不同极化角下超材料吸波体的吸收率表明:该超材料吸波体具有极化不敏感特性.仿真的不同入射角下超材料吸波体的吸收率表明:该超材料吸波体的入射角较窄.仿真的吸波体单元的表面电流和磁能密度分布表明:电、磁场之间存在交叉耦合,吸波与手性有关.仿真的不同损耗情况下超材料吸波体的吸收率表明:基板的介质损耗在吸波过程中起主导作用,金属的电阻热可以忽略不计.该超材料吸波体可能在要求双面吸波的领域中具有潜在的应用. 关键词： 极化不敏感 双面吸波 手性结构 超材料吸波体     

磁性量子元胞自动机逻辑电路的转换特性研究

本文研究了磁性量子元胞自动机反相器和择多逻辑门等基本逻辑电路在不同纳磁体厚度和间距下的转换特性.采用单畴近似LLG方程对纳磁体以及电路进行了建模和仿真,结果表明更厚的纳磁体需要更大的转换磁脉冲,大厚度纳磁体逻辑电路表现出较慢的转换;相同厚度和间距下,择多逻辑门比反相器的转换时间略长.此外,模拟结果还表明纳磁体间距对反相器的转换过程影响明显,而对择多逻辑门则影响较小. 关键词： 磁性量子元胞自动机 转换特性 厚度和间距 逻辑电路     

Planar Metamaterial Absorber Based on Lumped Elements

We present the design of a planar metamaterial absorber based on lumped elements, which shows a wide-band polarization-insensitive and wide-angle strong absorption. This absorber consists of metal electric resonators, the dielectric substrate, the metal film and lumped elements. The simulated absorbances under two different loss conditions indicate that high absorbance in the absorption band is mainly due to lumped resistances. The simulated absorbances under three different load conditions indicate that the local resonance circuit （lumped resistance and capacitance） could boost up the resonance of the whole RLC circuit. The simulated voltage in lumped elements indicates that the transformation efficiency from electromagnetic energy to electric energy in the absorption band is high, and electric energy is subsequently consumed by lumped resistances. This absorber may have potential applications in many military fields.     

具有极化选择特性的超材料频率选择表面的设计

基于超材料结构的设计理论,通过长金属线周期阵列和具有Lorentz谐振形式等效介电常数的金属短线的组合可频率选通特性.由不同周期排布和结构尺寸的长金属线和金属短线组合而成的频率选择表面具有不同频段的选通特性.文章提出了双层及单面两种具有极化选择特性的频率选择表面,两种结构均可实现对特定频段TE及TM波选通.具有极化选择特性的超材料频率选择表面的设计为极化滤波器以及极化波产生器的设计提供了借鉴. 关键词： 频率选择表面 超材料 极化选择