HPLC–PDA identification and resolution of rufinamide forced degradation impurities: A congregated chemometric expedite optimization coupled with factorials and desirability

Rufinamide is used presently to treat Lenaux–Gastaut syndrome. A full factorial design and desirability approach was investigated for the optimization of hydrolytic stress via response surface curves (RSCs). The degradation impurities were identified and resolved using reversed-phase high-performance liquid chromatography (RP-HPLC) on the Qualisil® BDS C₈ column. Acetonitrile–water (29:71, v/v) was optimized for the mobile phase and used at a flow rate of 1.0 ml/min with detection at a wavelength of 230 nm. Rufinamide showed appreciable susceptibility to hydrolysis under acidic and alkaline stress, and substantial degradation in the neutral condition. It degraded much less under oxidative stress. Exposure towards thermal and photolytic stress conditions indicated appreciable stability. The developed method was subjected to validation as per the recommendations of the International Conference on Harmonization. The proposed method showed no influence from the excipients and the degradation products. As well as good precision and accuracy in determination, the method showed a linear response between 2 and 12 μg ml⁻¹. The method was extended for determination in a human plasma sample, which resulted in excellent recovery without interference from matrix effects. The combined use of desirability and design for the optimization of acidic and alkaline hydrolytic stress led to simple and rapid analysis.     

Glyceride‐Mimetic Prodrugs Incorporating Self‐Immolative Spacers Promote Lymphatic Transport,Avoid First‐Pass Metabolism,and Enhance Oral Bioavailability

First‐pass hepatic metabolism can significantly limit oral drug bioavailability. Drug transport from the intestine through the lymphatic system, rather than the portal vein, circumvents first‐pass metabolism. However, the majority of drugs do not have the requisite physicochemical properties to facilitate lymphatic access. Herein, we describe a prodrug strategy that promotes selective transport through the intestinal lymph vessels and subsequent release of drug in the systemic circulation, thereby enhancing oral bioavailability. Using testosterone (TST) as a model high first‐pass drug, glyceride‐mimetic prodrugs incorporating self‐immolative (SI) spacers, resulted in remarkable increases (up to 90‐fold) in TST plasma exposure when compared to the current commercial product testosterone undecanoate (TU). This approach opens new opportunities for the effective development of drugs where oral delivery is limited by first‐pass metabolism and provides a new avenue to enhance drug targeting to intestinal lymphoid tissue.     

α-Glucosidase inhibitory activity of marine sponges collected in Mauritius waters

This report describes the use of α-glucosidase to evaluate the anti-diabetic potential of extracts from marine sponges collected in the Mauritius waters. Initial screening at 1.0 mg/mL of 141 extracts obtained from 47 sponge species revealed 10 extracts with inhibitory activity greater than 85%. Seven of the 10 extracts were further tested at 0.1 and 0.01 mg/mL and only the methanol extract of two sponges namely Acanthostylotella sp. (ASSM) and Echinodictyum pykei (EPM) showed inhibition activity greater than 60% at 0.1 mg/mL with an IC₅₀ value of 0.16 ± 0.02 and 0.04 ± 0.01 mg/mL, respectively, while being inactive at 0.01 mg/mL.     

High-rate and high-density gas separation adsorbents and manufacturing method

High-rate and high-density gas separation adsorbents used in vacuum pressure swing adsorption (VPSA) processes are described. Agglomerated zeolite Li–LSX compositions made using colloidal silica binding agents and having improved nitrogen pore diffusivity compared to like compositions prepared with traditional clay binders, are also described. Preparation methods for the colloidal silica-bound adsorbents are described together with their characterization by mercury (Hg) porosimetry, scanning electron microscopy (SEM) and low dead-volume breakthrough testing, from which the pore diffusivity is obtained. In this article, we show how the location and dispersion of the colloidal silica binding agent within the agglomerated zeolite particle yields pore-architectures that resemble “state-of-the-art” binderless adsorbents. In addition, we use VPSA process simulations to show that the best process performance is achieved by the combination of high-rate and high-density adsorbent properties.     

Highly Selective and Sensitive Graphene Based Electrochemical Sensor for Quantification of Receptor Agonist Rizatriptan

A highly selective and sensitive electrochemical sensor has been developed by modification of a glassy carbon electrode (GCE) with graphene (GRP) for quantification of Rizatriptan. The significant increase of the peak current and the improvement of the oxidation peak potential indicate that the electrochemical sensor facilitates the electron transfer of Rizatriptan. The oxidation peak current was proportional to the Rizatriptan concentration in the range from 100 to 600 µg/mL with detection (LOD) and quantification limit (LOQ) of 36.52 and 121.73 µg/mL, respectively. The developed method was successfully employed for quantification of Rizatriptan in pharmaceutical formulations. The sensor shows great promise for simple, sensitive and quantitative detection of Rizatriptan.     

Structural and micro structural studies of PbO-doped SnO2 sensor for detection of methanol,propanol and acetone

In the present work the structural information of PbO-doped SnO2 thick film sensor has been investigated with X-ray diffractometer (XRD) and scanning electron microscope (SEM). Initially, SnO2 powder was derived using sol-gel process and was subsequently doped with PbO and ground up to nanosized particles. A suitable gas sensor structure was fabricated on 1′′×1′′ alumina substrate using thick film technology. The necessary paste for screen printing was also developed. SEM results showed sol-gel derived powder gets more agglomerated in the thick film form. The sensitivity of the sensor has been investigated at different temperatures (150 ?C?350 ?C) upon exposure to methanol, propanol and acetone, yielding a maximum at 250 ?C for acetone with 1 wt% PbO-doping while at 350 ?C for propanol with 3 wt% PbO-doping of the sensor. The reduction of particle size to nanometers (validated through XRD) leads to a dramatic improvement in sensitivity of sensors for the chosen organic vapors. The results also correlate well with the microstructural properties of the material and the dopant.     

Synthesis and thermal evaluation of novel mono- and bis-adamantylated resorcinol-based phthalonitrile resins with enhanced solubility

Journal of Thermal Analysis and Calorimetry - Phthalonitrile (PN) resins are high-temperature-resistant thermosetting polymers which find applications in military as well as aerospace owing to...     

Comparable Ionicity of the Solutions of Aprotic and Protic Ionic Liquids by Anion Substitution

Temperature dependent molar conductances and fluidities of bisulfate and ethyl sulfate anion-based ionic liquids were measured. The extent of dissociation of the ionic liquids was estimated from the Walden plot in term of ionicity. The ionicity mainly depends on the magnitude of Coulombic forces, altered by the anion’s Lewis basicity. Aqueous solutions of aprotic ionic liquids, in general, possesses ionicity in the range of ≈70–99%. This article reveals that the substitution of the anion by bisulfate and ethylsulfate reduces the ionicity of aqueous solution of these ionic liquids to the range of 10–37%. This is very close to that exhibited by some of the protic ionic liquids and phosphonium based ionic liquids with sweetner anions. The concentration dependent molar conductance of these ionic liquids has been fitted to Mahiuddin and Ismail’s equation. To our surprise, the molar conductances of bisulfate-based aprotic ionic liquids are remarkably high, even though these ionic liquids possess lower ionicity.