Photocatalytic Activity of Supported Metal Nanoparticles and Single Atoms

Photocatalysis has been known as one of the promising technologies due to its eco-friendly nature. However, the potential application of many photocatalysts is limited owing to their large bandgaps and inefficient use of the solar spectrum. One strategy to overcome this problem is to combine the advantages of heteroatom-containing supports with active metal centers to accurately adjust the structural parameters. Metal nanoparticles (MNPs) and single atom catalysts (SACs) are excellent candidates due to their distinctive coordination environment which enhances photocatalytic activity. Metal-organic frameworks (MOFs), covalent organic frameworks (COFs) and carbon nitride (g-C₃N₄) have shown great potential as catalyst support for SACs and MNPs. The numerous combinations of organic linkers with various heteroatoms and metal ions provide unique structural characteristics to achieve advanced materials. This review describes the recent advancement of the modified MOFs, COFs and g-C₃N₄ with SACs and NPs for enhanced photocatalytic applications with emphasis on environmental remediation.     

Optimization of solid phase dispersive field‐assisted ultrasonication for the extraction of auramine O and crystal violet dyes using central composite design

Simultaneous preconcentration and determination of auramine o (AO) and crystal violet (CV) dyes from aqueous solution was conducted by ultrasound assisted (dispersive) solid phase microextraction (UASPME) based on SnO₂/SnS composite loaded activated carbon (SnO₂/SnS‐NCs‐AC). The prepared of SnO₂/SnS‐NCs‐AC was characterized by FESEM and XRD analysis. Main and interaction influences of operational parameters such as pH, sonication time, amounts of sorbent, and type of eluent on extraction efficiency were investigated by central composite design and optimized with desirability function approach (DFA). ANOVA was conducted and shows that optimized values were found at 15.33 min sonication time, 0.019 g SnO₂/SnS‐NCs‐AC mass, pH 5.46 and among different solvents, dimethyl formamide was selected as an efficient eluent. Under this conditions recoverees percentage were obtained 82.85% and 86.70% for AO and CV, respectively. Based on F‐test under ANOVA all main effect and interaction effect of understudy parameters has the significant effect on the responses. At optimum conditions, limit of detection (0.0015 and 0.001 mg/l), limit of quantitation (0.4 and 0.4 mg/l), limit of linearity (9.0 and 9.0 mg/l), enrichment factor (33.48 and 83.71) and percent relative standard deviation (3.44 and 4.20) were found to be for auramine o and crystal violet dyes, respectively. Finally, the method was successfully applied for the preconcentration and determination of AO and CV in water samples and ER% of 89.0‐97.0 and 96.2–98.0% as acceptable range were found to be for AO and CV samples, respectively.     

Preparation of chitosan functionalized end‐capped Ag‐NPs and composited with Fe3O4‐NPs: Controlled release to pH‐responsive delivery of progesterone and antibacterial activity against pseudomonas aeruginosa (PAO‐1)

In this work, functionalized chitosan end‐capped Ag nanoparticles (NPs) and composited with Fe₃O₄‐NPs was prepared as pH‐responsive controlled release carrier for gastric‐specific drug delivery. The structure of prepared material was characterized by FE‐SEM, XRD, EDS and FT‐IR analysis. The loading behavior of the progesterone onto this novel material was studied in aqueous medium at 25°C and their release was followed spectrophotometrically at 37°C in seven different buffer solutions (pH 1.2, 2.2, 3.2, 4.2, 5.2, 6.2 and 7.2) to simulate intestine and gastric media which experimental results reveal more release rate in pH 1.2 (gastric medium) with respect to other buffers. This observation is attributed to dependency of the CS‐IMBDO‐Ag‐Fe₃O₄‐NPs and progesterone structure with buffer pH that candidate this new material as prospective pH‐sensitive carrier for gastric‐targeted drug delivery. On the other hand, the antibacterial properties of this material against gram‐negative bacterium pseudomonas aeruginosa (PAO‐1) in agar plates was studied and accordingly based on broth micro dilution the minimum bactericidal concentration (MBC) and minimum inhibitory concentration (MIC) with respect to standard CLSI in different concentrations of CS‐IMBDO‐Ag‐Fe₃O₄‐NPs was calculated. The results reveal that MIC and MBC values are 50 and 1250 μg/mL, respectively. In addition, extracts of Portulaca oleracea leaves was prepared and its antibacterial activity in single and binary system with CS‐IMBDO‐Ag‐Fe₃O₄‐NPs as synergies effect against PAO‐1 was tested and results shown that these materials have significant synergistic effect for each other.     

Podophyllotoxin extraction from Linum usitatissimum plant and its anticancer activity against HT‐29, A‐549 and MDA‐MB‐231 cell lines with and without the presence of gold nanoparticles

In recent years, gold nanoparticles (Au‐NPs) have been taken into consideration in nanomedicine due to their excellent biocompatibility, chemical stability and promising optical properties. In this research, podophyllotoxin conjugated with gold nanoparticles (Au‐NPs‐POT) was synthesized and the conjugation of POT with Au‐NPs was confirmed using scanning electron microscopy, mass spectrometry and Fourier transform infrared spectroscopy. The anticancer effects of the product on preclinical models of lung, colon and breast cancers were investigated using MTT test. The analyses showed a direct dose–response relationship. It was found that higher concentrations of POT have more positive effects on the inhibition of cancer cell growth. At POT concentrations of 1, 2.5, 5, 7.5, 10, 15 and 20 ng ml^?1, approximately 50% of the growth of colorectal, lung and breast cancer cell lines was inhibited, while similar results were obtained in the presence of 1, 2, 3, 4 and 5 μg ml^?1 Au‐NPs‐POT. Au‐NPs‐POT exhibited the lowest cytotoxicity due to the presence of POT. The anticancer feature of Au‐NPs‐POT proved the potential to develop better anticancer therapeutics and to open new avenues for treatment of cancers.     

Simultaneous removal of Cu2+ and Cr3+ ions from aqueous solution based on Complexation with Eriochrome cyanine‐R and derivative spectrophotometric method

TiO₂ nanoparticles deposited on activated carbon (TiO₂–NP–AC) was prepared and characterized by XRD and SEM analysis. Subsequently, simultaneous ultrasound‐assisted adsorption of Cu²⁺ and Cr³⁺ ions onto TiO₂‐NPs‐AC after complexation via eriochrome cyanine R (ECR) has been investigated with UV–Vis and FAA spectrophotometer. Spectra overlapping of the ECR‐Cu and ECR‐Cr complex was resolve by derivative spectrophotometric technique. The effects of various parameters such as initial Cu²⁺ (A) and Cr³⁺ (B) ions concentrations, TiO₂‐NPs‐AC mass (C), sonication time (D) and pH (E) on the removal percentage were investigated and optimized by central composite design (CCD). The optimize conditions were set as: 4.21 min, 0.019 mg, 20.02 and 13.22 mg L^?1 and 6.63 for sonication time, TiO₂–NP–AC mass, initial Cr³⁺ and Cu²⁺ ions concentration and pH, respectively. The experimental equilibrium data fitting to Langmuir, Freundlich, Temkin and Dubinin–Radushkevich models show that the Langmuir model is a good and suitable model for evaluation and the actual behavior of adsorption process and maximum adsorption capacity of 105.26 and 93.46 mg g^?1 were obtained for Cu²⁺ and Cr³⁺ ions, respectively. Kinetic evaluation of experimental data showed that the adsorption processes followed well pseudo second order and intraparticle diffusion models.     

Synthesis of New Aza Thia Crowns Bearing 2,2′-Diaminodiphenyl Disulfide

Abstract

New aza thia crowns were prepared from the reaction of 2,2′-diaminodiphenyl disulfide and diacids or diacid chlorides. Diacids are malonic acid, adipic acid, sebacic acid, and 2,2′-thiodiacetic acid and diacid dichlorides are malonyl chloride, adipoyl chloride, sebacoyl chloride, and 2,2′-thiodiacetyl chloride.

[Supplementary materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfer, and Silicon and the Related Elements for the following free supplemental files: Additional figures.]     

Fabrication and application of a new modified electrochemical sensor using nano-silica and a newly synthesized Schiff base for simultaneous determination of Cd,Cu and Hg ions in water and some foodstuff samples

A new chemically modified carbon paste electrode was constructed and used for rapid, simple, accurate, selective and highly sensitive simultaneous determination of cadmium, copper and mercury using square wave anodic stripping voltammetry (SWASV). The carbon paste electrode was modified by N,N′-bis(3-(2-thenylidenimino)propyl)piperazine coated silica nanoparticles. Compared with carbon paste electrode, the stripping peak currents had a significant increase at the modified electrode. Under the optimized conditions (deposition potential, −1.100 V vs. Ag/AgCl; deposition time, 60 s; resting time, 10 s; SW frequency, 25 Hz; pulse amplitude, 0.15 V; dc voltage step height, 4.4 mV), the detection limit was 0.3, 0.1 and 0.05 ng mL⁻¹ for the determination of Cd²⁺, Cu²⁺ and Hg²⁺, respectively. The complexation reaction of the ligand with several metal cations in methanol was studied and the stability constants of the complexes were obtained. The effects of different cations and anions on the simultaneous determination of metal ions were studied and it was found that the electrode is highly selective for the simultaneous determination of Cd²⁺, Cu²⁺ and Hg²⁺. Furthermore, the present method was applied to the determination of Cd²⁺, Cu²⁺ and Hg²⁺ in water and some foodstuff samples.     

Chemically bonded multiwalled carbon nanotubes as efficient material for solid phase extraction of some metal ions in food samples

Multiwalled carbon nanotubes chemically functionalized with 2-((3-silylpropylimino) methyl) phenol (SPIMP-MWCNT) and successfully applied for the solid phase extraction (SPE) of some metal ions in food samples. The influences of the analytical parameters including pH, amounts of solid phase, eluent conditions (type, volume and concentrations), sample volume and interference of some metal ions on the recoveries of ions Cu²⁺, Pb²⁺, Fe²⁺, Ni²⁺ and Zn²⁺ ion were investigated. The metal ions retained on SPIMP-MWCNT was eluted using 6?mL of 4?mol?L^?1 HNO₃ solution and their content was determined by flame atomic absorption spectrometry (FAAS) with recoveries more than 95% and relative standard deviations (n?=?5) between 2.4–3.4% for both reproducibility and repeatability. The detection limit of this metal ions was between 1.0–2.6?ng?mL^?1 (3S _b , n?=?10) and their preconcentration factor was 100, while their loading capacity was above 32.9?mg?g^?1 of SPIMP-MWCNT. The proposed method was successfully applied for the preconcentration and determination of analytes in different samples.