Syntheses and configurations of some heterocyclic amidoximes. X-Ray crystal structure of 3-phenyl-5,6-dihydro-2(1H)-pyrazinone-O-methyloxime

O-Methyl-α-ketophenylacetohydroximoyl chloride ( 1 ) was prepared by the reaction of O-methyl-α-methoxyphenylacetohydroximoyl chloride ( 5 ) with N-bromosuccinimide and concentrated hydrobromic acid. Reaction of 1 with ethylenediamine gave 3-phenyl-5,6-dihydro-2(1H)-pyrazinone-O-methyloxime ( 6 ). 3-Phenyl-5,6-cyclohexano-5,6-dihydro-2(1H)-pyrazininone-O-methyloxime ( 7 ) was prepared by reaction of 1 with trans-1,2-diaminocyclohexane. The X-ray structure of 6 has been determined. The crystals are orthorhombic, space group Pbca with a = 10.264(3), b = 18.262(4), c = 23.530(4)Å, V = 4411(2)ų, and Z = 16. The structure, which was refined to R = 0.038 using 1652 observed reflections, shows the amidoxime moiety to be the Z configuration. Reaction of benzohydroximoyl chloride with aziridine gave (Z)-aziridinylbenzaldoxime ( 16a ). Ultraviolet irradiation of a benzene solution of 16a gave a mixture of the Z and E isomers 16a and 16b . The E isomer 16b underwent thermal isomerization to 16a at 100°. Reaction of 16a with dimethyl sulfate in sodium hydroxide solution gave (Z)-O-methylaziridinylbenzaldoxime ( 17a ). Photoisomerization of a hexane solution of 17a gave a mixture of the Z and E isomers 17a and 17b which were separated by preparative glc. The isomers 17a and 17b are resistant to thermal Z = E isomerization. The mechanisms of thermal isomerization of benzamidoximes are discussed.     

A selective modified carbon paste electrode for determination of cyanide using tetra-3,4-pyridinoporphyrazinatocobalt(II)

A chemically modified carbon paste electrode with 3,4-tetra pyridinoporphirazinatocobalt(II) (Co(3,4 tppa) was applied to the determination of free cyanide ion. The electrode has a linear range between 1.5 × 10⁻⁵ M and 1.0 × 10⁻² M with a Nernstian slope of 60 ± 1.5 mV/decade and its detection limit is 9 × 10⁻⁶ M. The response time of electrode is 5 min. The proposed electrode was applied successfully for the determination of cyanide in commercially available spring water. Some anions, such as SCN⁻, I⁻, Cl⁻, Br⁻ and oxalate that are usually serious interfering species for most of cyanide selective electrodes, did not have any interfering effect for this proposed electrode.     

An accurate expression for radial distribution function of the Lennard-Jones fluid

A simple and accurate expression for radial distribution function (RDF) of the Lennard-Jones fluid is presented. The expression explicitly states the RDF as a continuous function of reduced interparticle distance, temperature, and density. It satisfies the limiting conditions of zero density and infinite distance imposed by statistical thermodynamics. The distance dependence of this expression is expressed by an equation which contains 11 adjustable parameters. These parameters are fitted to 353 RDF data, obtained by molecular dynamics calculations, and then expressed as functions of reduced distance, temperature and density. This expression, having a total of 65 constants, reproduces the RDF data with an average root-mean-squared deviation of 0.0152 for the range of state variables of 0.5  T^*  5.1 and 0.35  ρ^*  1.1 (T^*=kT/ε and ρ^* = ρσ³ are reduced temperature and density, respectively). The expression predicts the pressure and the internal energy of the Lennard-Jones fluid with an uncertainty that is comparable to that obtained directly from the molecular dynamics simulations.     

Aluminium(III)-selective electrode based on a newly synthesized tetradentate Schiff base

A PVC membrane electrode for aluminium ion based on bis(5-phenyl azo salicylaldehyde) 2,3-naphthalene diimine (5PHAZOSALNPHN) as an ion carrier was developed. The electrode exhibits a Nernstian slope of 19.3+/-0.8 mV per decade and a linear range of 5.0x10(-6)-1.0x10(-2) M for Al(NO(3))(3). The limit of detection is 2.5x10(-6) M. It has a fast response time of about 10 s and can be used for at least 10 weeks without observing any deviation. The proposed membrane sensor revealed good selectivity for Al(3+) over a wide variety of other metal ions and could be used in pH range of 2.9-5.0. It was used as an indicator electrode in potentiometric titration of aluminium ion.     

Chromium(III) ion-selective electrode based on 4-dimethylaminoazobenzene

A PVC-based membrane of 4-dimethylaminoazobenzene reveals a Nernstian potentiometric response (with slope of 19.5+/-0.6 mV/decade and a correlation coefficient of 0.999) for Cr(III) over a wide concentration range (1.66 x 10(-6)-1.0 x10(-2) mol dm(-3)). The potential of this electrode is independent of pH in the range of 3.0-5.5. It has a fast response time of about 10 s and was used for a period of 3 months with good reproducibility. The detection limits of this membrane electrode was 8 x 10(-7) M. the proposed electrode has been used as an indicator electrode in the potentiometric titration of Cr(III) with EDTA. This sensor exhibits a very good selectivities for Cr(III) over a wide variety of metal ions.     

Carbon nanotube composite coated platinum electrode for detection of Cr(III) in real samples

This paper demonstrates the application of composite multi-walled carbon nanotube (MWNT) polyvinylchloride (MWNT-PVC) based on 1,5-diphenylcarbazide as chromium ionophore in potentiometric measurement. The sensor shows a good Nernstian slope of 19.52 ± 0.40 mV/decade in a wide linear range concentration of 6.3 × 10⁻⁸ to 1.0 × 10⁻² M for Cr(NO₃)₃. The detection limit of this electrode was found to be 3.2 × 10⁻⁸ M of Cr(NO₃)₃ and is applicable in a pH range of 3.0-6.8. It has a short response time of about 10 s. This chromium electrode has a good selectivity over 16 various metal ions. The practical analytical utility of this electrode was demonstrated by measurement of Cr(III) in drinking water and mineral water samples without any serious preliminary pre-treatment and chromium in multivitamin.     

Silver,iron, and nickel immobilized on hydroxyapatite‐core‐shell γ‐Fe2O3 MNPs catalyzed one‐pot five‐component reactions for the synthesis of tetrahydropyridines by tandem condensation of amines,aldehydes, and methyl acetoacetate

In this study, Ag, Ni²⁺, and Fe²⁺ immobilized on hydroxyapatite‐core‐shell γ‐Fe₂O₃ nanoparticles (γ‐Fe₂O₃@HAp‐Ag, γ‐Fe₂O₃@HAp‐Ni²⁺, and γ‐Fe₂O₃@HAp‐Fe²⁺) as a new and reusable Lewis acid magnetic nanocatalyst was successfully synthesized and reported for an atom economic, extremely facile, and environmentally benign procedure for the synthesis of highly functionalized tetrahydropyridines derivatives 4a‐t is described by one‐pot five‐component reaction of 2 equiv of aldehydes 1 , 2 equiv of amines 2 , and 1 equiv of methyl acetoacetate 3 in EtOH at room temperature in good to high yields and short reaction time. The presented methodology offers several advantages such as easy work‐up procedure, reusability of the magnetic nanocatalyst, operational simplicity, green synthesis avoiding toxic reagents and solvent, mild reaction conditions, and no tedious column chromatographic separation.     

Many-body and quantum effects in the surface tension and surface energy of liquid neon and argon using the Fowler’s approximation

The Fowler’s expression for calculation of the reduced surface tension and surface energy has been used with Lennard-Jones (LJ) and two-body Hartree-Fock dispersion (HFD)-like potentials for neon and argon, respectively. The required radial distribution functions (RDFs) have been used from two recently determined expressions in the literature and a new equation proposed in this work. Quantum corrections for neon system have been considered using the Feynman-Hibbs (FH) and Wigner-Kirkwood (WK) approaches. To take many-body forces into account for argon system, the simple three-body potentials of Wang and Sadus (2006) [33] and Hauschild and Prausnitz (1993) [30] used with the HFD-like potential without requiring an expensive three-body calculation. The results show that the quantum and three-body effects improve the prediction of the surface tension of liquid neon and argon using the Fowler’s expression.     

Silphox [POCl3−n (SiO2) n ] as a New,Efficient, and Heterogeneous Reagent for the Synthesis of Benzimidazole Derivatives Under Microwave Irradiation

Silphox [POCl_3-n(SiO₂)_n] efficiently catalyzes the condensation of benzene-1,2-diamine with mono and dicarboxylic acids under microwave irradiation to afford benzimidazole derivatives in high yields and short reaction times.