Low temperature heat capacities and thermodynamic properties of rare earth triisothiocyanate hydrates——Pr(NCS)_3· 7H_2O and Nd(NCS)_3· 7H_2O

Heat capacities of Pr(NCS)3·7H2O and Nd(NCS)3· 7H2O haw been measured from 13 to 300 K by using a fully automated adiabatic calorimeter. Schottky anomaly was observed for Pr(NCS)3·7H2O below 50 K. The polynomial equations for calculating the heat capacity values of the two compounds in the range of 13-300 K were obtained by the least-squares fitting based on the experimental Cp data. The Cp values below 13 K were estimated by using the Debye-Einstein and Schottky heat capacity functions. The standard molar thermodynamic functions were computed from 0 to 300 K. The standard entropies and Gibbs energies of formation of the two compounds were also calculated.     

配合物Zn(Phe)(NO3)2·H2O(s)的低温热容和标准摩尔生成焓

利用精密自动绝热热量计直接测定了配合物Zn(Phe)(NO3)2·H2O(s) (Phe:苯丙氨酸)在78-370 K温区的摩尔热容. 通过热容曲线的解析得到该配合物的起始脱水温度为, T0=(324.27±0.37) K. 将该温区的摩尔热容实验值用最小二乘法拟合得到摩尔热容(Cp, m)对温度(T)的多项式方程, 并且在此基础上计算出了它的舒平热容值和各种热力学函数值. 依据Hess定律, 通过设计热化学循环, 选择体积为100 mL浓度为2 mol·L-1 的盐酸作为量热溶剂, 利用等温环境溶解-反应热量计分别测定混合物{ZnSO4·7H2O(s)+2NaNO3(s)+L-Phe(s)}和{Zn(Phe)(NO3)2·H2O(s)+Na2SO4(s)}的溶解焓为, ⊿dH0m,1 =(69.42±0.05) kJ·mol-1, ⊿dH0 m,2 =(48.14±0.04) kJ·mol-1, 进而计算出该配合物的标准摩尔生成焓为, ⊿fH0m =-(1363.10±3.52) kJ·mol-1. 另外, 利用紫外-可见(UV-Vis)光谱和折光指数(refractiveindex)的测量结果检验了所设计的热化学循环的可靠性.     

水-乙醇二元体系共沸混合物的热力学研究

用全自动低温绝热量热计测定了水、乙醇以及水和乙醇组成的共沸混合物在不同温区的摩尔热容Cp,m. 建立了共沸混合物Cp,m与温度T的函数关系.结果表明,水和乙醇组成的共沸混合物在98.496 K发生玻璃态转化,在158.939 K 和270.95 K发生固-液相变.获得了其相应的相变焓和相变熵.计算了以298.15 K为基准的该共沸混合物的热力学函数和超额热力学函数.     

稀土高氯酸盐-谷氨酸配合物[Pr2(L-α-Glu)2(ClO4)(H2O)7](ClO4)3•4H2O的低温热容和热化学研究

合成了一种稀土高氯酸盐-谷氨酸配合物. 经TG/DTG、化学和元素分析、FTIR及与相关文献对比, 确定其组成为[Pr₂(L-α-Glu)₂(ClO₄)(H₂O)₇](ClO₄)₃•4H₂O, 纯度为99.0%以上. 利用显微熔点仪分析发现其没有熔点. 在78～370 K温区, 用精密绝热量热仪测量其低温热容, 在285～306 K温区发现一明显吸热峰, 归结为固-固相变过程. 通过相变温区三次重复热容测量, 得到相变温度T_tr、相变焓Δ_trH_m和相变熵Δ_trS_m分别为(297.158±0.280) K, (12.338±0.016) kJ•mol^－1和(41.520±0.156) J•K^－1•mol^－1. 用最小二乘法将非相变温区的热容对温度进行拟合, 得到了热容随温度变化的两个多项式方程. 用此方程进行数值积分, 得到每隔5 K的舒平热容值和相对于273.15 K的热力学函数值. 根据TG/DTG结果, 推测了该配合物的热分解机理. 依据Hess定律, 选择1 mol•dm^－3盐酸为量热溶剂, 利用等温环境溶解-反应量热计, 测定了该配合物的标准摩尔生成焓为: Δ_fH_m⁰＝－(7223.1±2.4) kJ•mol^－1.     

用SETARAM高温量热计测定镍铝复合粉反应温度及其生成热

镍铝复合金属粉是用于等离子表面喷镀技术的一种新材料,具有耐磨、耐腐蚀、增加工件表面强度等特殊性能。为了评价材料的性能,改进制备工艺条件提供依据,需要对这种复合粉在高温下生成金属化合物的反应热及反应温度进行测试研究。     

Thermodynamic Study of the Three Isomers of Bromobenzoic Acid

The enthalpies of sublimation and fusion and triple-point temperatures of 2-bromo-. 3-bro-mo- and 4-bromobenzoic acids have been determined precisely by sublimation calorimetry, drop calorimetry and differential thermal analysis. The measurements of sublimation enthalpy of the three acids were made at 333, 348 and 363 K, respectively, using a Tian-Calvet microcalorimeter equipped with Knudsen effusion cells. The derived standard molar enthalpies of sublimation at 298.15 K are (95. 94±0. 41), (99. 20± 0.18), and (103. 08±0. 59) kJ · mol-1for the 2-bromo-, 3-bromo- and 4-bromobenzoic acids, respectively. In addition, the saturated vapour pressure of these compounds was also calculated on the basis of the sublimation experiments. The enthalpy of fusion, the triple-point temperatures and the mole fraction purities of the samples of the investigated substances were measured using the mean temperature version DTA apparatus developed by the CTM of the CNRS in Marseille. The triple-point temperature and the     

Mg0.9-xTi0.1PdxNi(x=O.04～0.1)贮氢合金电极腐蚀行为研究

研究了Pd部分替代Mg对Mg0.9-xTi0.1PdxNi(x=0.04～0.1)贮氢合金腐蚀性能的影响.利用机械合金化方法制备了Mg0.9-xTi0.1PdxNi(x=0.04～0.1)贮氢合金.XRD和TEM分析表明经120 h球磨后该合金完全非晶化.循环充放电测试结果表明,Pd的替代有效地延长了Mg0.9-xTi0.1PdxNi(x=0.04～0.1)合金的循环寿命.采用开路电位测量,阳极极化,电化学阻抗和X射线光电子能谱研究了该合金的腐蚀行为.结果表明,随着Pd含量增加,合金腐蚀电位正移,初始腐蚀电流下降,腐蚀电流增加的速度变缓.采用本文提出的等效电路模型较好地拟合了合金的电化学阻抗谱.分析表明,随着Pd含量的增加,合金表面钝化膜厚度和电阻逐渐增大.X射线光电子能谱分析表明,Pd的加入减弱了合金在充放电过程中的氧化程度.当Pd含量达到0.1时,Mg0.9-xTi0.1PdxNi(x=0.04～0.1)合金的耐腐蚀性能最好,其放电容量保持率最高.     

NATIONAL STANDARD OF HEAT CAPACITY MEASUREMENT OF SOLIDS IN THE RANGE OF 4.2—90K——AN AUTOMATED ADIABATIC CALORIMETER FROM 25 TO 90K AND MOLAR HEAT CAPACITIES OF α-ALUMINA

The construction of an automated adiabatic calorimeter for heat capacity measurement ofsolids in the temperature range of 25- 90K is described in detail. The sample vessel of thecalorimeter has thin radial vanes which make no contact with its inner wall and are distrib-uted evenly, thus greatly improving the internal thermal equilibration of the vessel. Theprecision of temperature control for the adiabatic shields and electrical leads of the calori-metric system are heightened to a great extent by using the high precision ACD- 79 modeladiabatic controller specially developed by us for this purpose. Measurements of the heatcapacities of high purity α-Al_2O_3, one of the internationally-accepted standard referencematerials, agree with those of the National Bureau of Standards (NBS), USA within ±0.3%,demonstrating the reliability of this apparatus.     

室温离子液体EMIES的标准生成焓

在(298.15 ±0.01) K下用转动弹热量计测定了离子液体硫酸乙酯-1-甲基-3-乙基咪唑(EMIES)及合成它的原料1-甲基咪唑的恒容燃烧热,通过计算得到它们的标准燃烧焓 分别为(－2671±2) 和(－286.3±0.5) kJ·mol－1;标准生成焓 分别为(－3060±3) kJ·mol－1和(－2145±4) kJ·mol－1.结合文献上硫酸二乙酯的标准生成焓数据,得到了合成离子液体EMIES的反应热(－102.3±1.0) kJ·mol－1,与合成实验中观察到的强烈放热现象是一致的.根据离子液体EMIES的热容数据,计算了不同温度下EMIES的标准生成焓.     

四元Mg0.9Ti0.1Ni0.9X0.1(X=Mn,Zn,Co,Fe)系列合金的制备及性能研究

用机械合金化法合成了Mg0.9Ti0.1Ni0.9X0.1(X=Mn, Zn, Co, Fe)系列合金. X射线衍射(XRD)结构分析表明, 用X部分替代Ni后, 促进了Mg0.9Ti0.1Ni合金的非晶化过程. 用Co和Fe部分替代Ni提高了合金的放电容量, 但却降低了合金的循环稳定性. 用Zn和Mn部分替代Ni提高了合金电极的循环寿命, 尤其是Mg0.9Ti0.1Ni0.9Zn0.1合金电极经10个充放电循环后, 其放电容量仍可达到313.8 mA·h/g. 对添加Co后的合金进行p-c-T测试发现, Mg0.9Ti0.1Ni0.9Co0.1合金的吸放氢容量明显比Mg0.9Ti0.1Ni合金高, 这与电化学所测到的结果一致.