A DFT Study on the Adsorption of CO_2 Molecules on CaO(001) Surface at Different Coverages

The CO_2 adsorption on CaO(001) surface at different coverages from 1/9 monolayer(ML) to 1 ML has been investigated using density functional theory calculations. With the analysis of the most stable adsorption structures at different coverages, the mechanism of CaO(001)surface carbonating into CaCO_3 has been explored. At low coverages(≤1/3 ML), CO_2 molecule prefers sitting in parallel pattern on the CaO(001) surface, while the structure of the CaO(001)surface remains unchanged. At medium coverage(4/9 ～ 2/3 ML), the repulsive interactions between oxygen atoms of CO_2 become stronger, and the calcium carbonation structure appears on the CaO(001) surface. At high coverage( ≥ 7/9 ML), the structure of the CaO(001) surface is deeply damaged, and a few CO_2 molecules have penetrated into the surface and bound to the O atom of the second layer(sub-surface), eventually forming the layered structure of CaCO_3.Additionally, herein has discussed the simulation of HREELS and thermodynamical stability of these structures at different coverages.     

一维〔M（tmp）〕_2ReO_4（M＝Ni、Cu、Pd）聚合物的能带结构

用紧束缚ＥＨＴ晶体轨道方法对一维〔Ｍ（ｔｍｐ）〕_２ＲｅＯ_４（Ｍ＝Ｎｉ、Ｃｕ、Ｐｄ）聚合物进行了能带计算，利用键向量近似方法对能带的结构及组成进行了讨论。结果表明，该类型聚合物具有不同的导电机理，并进一步研究了环平面间的成键性质及转角改变对聚合物导电性能的影响。     

β-D-核糖(RI)与一价、二价金属离子相互作用的理论研究

在HF和MP2水平用全电子(AE)和相对论有效芯势(RECP)方法研究了Ⅰa、Ⅰb、Ⅱa和Ⅱb族金属离子与β-D-核糖(RI)的相互作用.结果表明,RECP能可靠地用于重金属离子;二价金属离子(M2+)比一价金属离子(M+)更易使β-D-核糖(RI)变形;二价金属离子络合物(RI-M2+)比一价金属离子络合物(RI-M+)稳定.电荷布居分析的结果支持上述结论.     

β-D-核糖（ RI）与一价、二价金属离子相互作用的理论研究

在HF和MP2水平用全电子(AE)和相对论有效芯势(RECP)方法研究了Ⅰa、Ⅰb、Ⅱa和Ⅱb族金属离子与β D 核糖(RI)的相互作用. 结果表明, RECP能可靠地用于重金属离子;二价金属离子(M2＋)比一价金属离子(M＋)更易使β D 核糖(RI)变形;二价金属离子络合物(RI M2＋)比一价金属离子络合物(RI M＋)稳定. 电荷布居分析的结果支持上述结论.     

O2在MgO(001)完整和缺陷表面上的吸附

在密度泛函理论的框架下， 采用嵌入点电荷簇模型研究了O2在MgO(001)完整和缺陷表面上的吸附.用电荷自洽的方法确定了点电荷的值.计算结果表明， O2倾向吸附在低配位的角Mg2＋端.并且发现， 当O2为平躺吸附时，键长有较大的拉伸，将有利于O2的解离.同时，分别计算了使用裸簇和嵌入表观±2.0 e点电荷簇模型时的吸附能，并与采用电荷自洽方法的计算值进行了比较.结果表明，电荷自洽方法更能有效反映簇周围的环境，得到的计算结果能够较好地与实验值吻合.最后，分别计算了不同吸附情况下O2的振动频率.     

DFT Study of Metal Atoms Adsorbed at Low-coordinated Sites of MgO （001） Surface

1 INTRODUCTION The interfaces between metals and oxide play a vital role in many industrial applications: hetero- geneous catalysis, microelectronics, thermal barriers, corrosion protection, metal processing and so on[1]. In catalysis, the choice of metal and oxide support is critical in order to obtain a desired reactivity and selectivity[2]. This is due in part to the inherent reac- tivity of the two components. Also the size and shape of the metal particle, which depend on the choice…     

水在HfO2(111)和(110)表面的吸附与解离

运用广义梯度近似密度泛函理论方法(GGA-PW91)结合周期平板模型, 研究水分子在二氧化铪(111)和(110)表面不同吸附位置在不同覆盖度下的吸附行为. 通过比较不同吸附位的吸附能和几何构型参数发现:(111)和(110)表面铪原子(top 位)是活性吸附位. 水分子与表面的吸附能值随覆盖度的变化影响较小. 在(111)和(110)表面, 水分子都倾向以氧端与表面铪原子相互作用. 同时也计算了羟基、氧和氢在表面的吸附, Mulliken 电荷布居, 态密度及部分频率. 结果表明, 在两种表面羟基以氧端与表面铪相互作用, 氧原子与表面铪和氧原子同时成键, 而氢原子直接与表面氧原子相互作用形成羟基. 通过过渡态搜索, 水分子在(111)和(110)表面发生解离, 反应能垒分别为9.7和17.3 kJ·mol^-1, 且放热为59.9和47.6 kJ·mol^-1.     

AgGa(S1-xSex)2固溶体的电子结构和光学性质

采用基于赝势平面波基组的密度泛函理论方法, 对一系列具有黄铜矿结构的AgGa(S_1-xSe_x)₂固溶体的构型、电子结构、线性和二阶非线性光学性质进行了系统研究. 结果表明, 各固溶体具有类似的能带结构, 体系带隙随x值增加而逐渐减小. 当所引入的Hartree-Fock交换项贡献为22.56%时, 对应的杂化PBE泛函得到的带隙值与实验结果相近. 固溶体的各种光学性质, 包括折射率、双折射率、反射率、吸收系数和二阶倍频系数等均随着组成的改变呈现出有规律的变化趋势, 变化范围介于AgGaS₂和AgGaSe₂二者之间. 因此, 利用固溶体光学性质的变化规律, 可从中寻找出具有特定光学性能的晶体材料.     

Theory Study of the Adsorption of Hydrocyanic Acid onto Small Silver Clusters

Density functional theory calculations have been performed to study the interaction of small silver clusters, Ag2 ~Ag9, with HCN. The adsorption of HCN on-top site of the silver cluster, among various possible sites, is energetically preferred. The adsorption energies of HCN on the silver clusters reach a local maximum at n = 4, which is only about 0.450 eV, indicating that the adsorbed HCN molecule is weakly perturbed. The adsorbed C–N and C–H stretching frequencies are blue- and red-shifted compared with the values of free HCN, respectively.     

Prediction of the Frontier Electronic States in a Finite Single-wall Carbon Nanotube

A theoretical model is summarized into the shorter vector principle. It is used to predict the topological structure of wave function and the oscillation rule of energy gap in various types of finite carbon nanotubes (CNTs). The theoretical model indicates that the characteristics of the electronic states only depend on the nanotube size and its symmetry along the shorter vector direction. In this direction, the wave functions of the original 3m (or 3m/2) periodicity are also suitable for armchair, chiral and zigzag finite CNTs with the C2 (Cs), C1 and Cn point groups, respectively. Energy gaps present the oscillation with 3m (or 3m/2) or odd-even n. The first principle calculations for some prototype systems are performed. The results are consistent with the theoretical model.