超软X射线流气式正比计数管

介绍了一种用于测量183～933eV超软X射线的圆柱形、侧窗式、流气式正比计数管,工作气体是0.11MPa的P-10气体或氦气-丙烷混合气体。计数管内径为φ25mm,直径为φ0.3mm的入射窗是由厚度80～90μgcm~2聚乙烯甲醛制成的。该计数管的特点:(1)薄窗,对软X射线透过率高。(2)流气式,工作寿命长。(3)能量分辨率好。(4)计数率高(1×10~(14)个/s)。(5)可测能区宽(0.183～10keV)。(6)可以方便更换窗膜材料、厚度及窗口直径。近几年来该计数管已经为高强度低能X光源提供较好监测。     

Facile synthesis of ordered mesoporous carbons with high thermal stability by self-assembly of resorcinol-formaldehyde and block copolymers under highly acidic conditions

The effect of phenols reactivity with formaldehyde on the formation of ordered mesoporous carbons has been investigated. A strategy to accelerate the polymerization of phenolic resins by using strongly acidic conditions is proposed. The self-assembly of resorcinol-formaldehyde and block copolymers (e.g., F127) under highly acidic concentrations (e.g., 1.5 M HCl) is probably driven by the I+X-S+ mechanism and hydrogen bonding and affords a highly reproducible approach for synthesis of ordered mesoporous carbons. The synthesis can be readily scaled up with no change in sample quality. The carbon material obtained (denoted as C-ORNL-1) exhibits highly ordered hexagonal mesostructure, with a typical BET surface area of approximately 600 m2/g, pore size of 6.3 nm, and pore volume of approximately 0.60 cm3/g. One of the unique structural features of C-ORNL-1 is its high thermal stability; it can be graphitized at 2600 degrees C while considerable mesoporosity is maintained.     

酰亚胺及磺酰苯酰亚胺的氰甲基化新方法

二乙胺基乙腈分別与苯邻二酰亚胺、丁二酰亚胺或邻-磺酰苯酰亚胺反应后,可生成相应的N-氰甲基苯邻二酰亚胺、N-氰甲基丁二酰亚胺,N-氰甲基邻磺酰苯酰亚胺及O-氰甲基邻磺酰苯酰亚胺。酰亚胺或磺酰苯酰亚胺的氰甲基化反应活性,随氮负离子的稳定性及其酸性增强而增大。     

Mesoporous carbon materials: synthesis and modification

Porous carbon materials are of interest in many applications because of their high surface area and physicochemical properties. Conventional syntheses can only produce randomly porous materials, with little control over the pore-size distributions, let alone mesostructures. Recent breakthroughs in the preparation of other porous materials have resulted in the development of methods for the preparation of mesoporous carbon materials with extremely high surface areas and ordered mesostructures, with potential applications as catalysts, separation media, and advanced electronic materials in many scientific disciplines. Current syntheses can be categorized as either hard-template or soft-template methods. Both are examined in this Review along with procedures for surface functionalization of the carbon materials obtained.     

1,2,4-三苯基环戊二烯的合成及其烷基化反应

测定了颇哪醇在酸性条件下所得的脱水产物的分子结构.结果表明,在酸性条件下颇哪醇的脱水反应优于重排反应,由此合成了1,2,4-三苯基环戊二烯.该环戊二烯衍生物的烷基化反应,在通常条件下优先发生在碳环的第5位碳原子上,但在苛刻的剧烈反应条件下,进而发生在碳环的第3位碳原子上.讨论了脱水反应和烷基化反应的机理.     

杯[6]芳烃-双金属卟啉仿P-450酶模型的研究Ⅳ.对异丙苯氧化的催化行为

研究了杯[6]芳烃-双金属卟啉在氧化异丙苯中的催化行为，结果表明杯[6]芳烃-双金属卟啉比之相应的金属卟啉具有更高的催化活性，并表现同样的选择性，生成苯乙酮和醇组份。此一结果同通常酞菁或其它如西弗碱大分子金属络合物催化下生成丙酮和酚不同。还考察了温度、轴向配体、催化剂用量及金属离子种类等对反应的影响，仔细地通过测定反应速度比较了反应的活性。     

Adaptation of Cu/ZnO/Al_2O_3 to Temperature Change in Methanol Synthesis from CO_2 Hydrogenation

The induction behavior in CO2 hydrogenation was studied by varying the reaction temperature to investigate the adaptation of the Cu/ZnO/Al2O3 catalyst to the temperature change. The results indicated that a used catalyst had a tendency to keep the last running state in new reaction conditions for MeOH formation, and that this tendency was related to the difference in Cu/Cun+ ratio caused by CO2 and CO produced at different reaction temperatures. However, the reverse water-gas shift reaction (RWGS) induced at four temperatures was completely different from that of methanol synthesis. It implied that the two so-called competitive reactions in CO2+H2, RWGS and methanol synthesis, have different active centers.     

Low-temperature exfoliation of multilayer-graphene material from FeCl3 and CH3NO2 co-intercalated graphite compound

Microwave induced rapid decomposition of nitromethane at low temperature exfoliates the graphene sheets from the FeCl(3) and CH(3)NO(2) co-intercalated graphite compound without creating many defects and functional groups. This approach provides a scalable method for high-quality graphene materials via low-temperature exfoliation of graphite under mild chemical conditions.     

An Air‐Stable Na3SbS4 Superionic Conductor Prepared by a Rapid and Economic Synthetic Procedure

All‐solid‐state sodium batteries, using solid electrolyte and abundant sodium resources, show great promise for safe, low‐cost, and large‐scale energy storage applications. The exploration of novel solid electrolytes is critical for the room temperature operation of all‐solid‐state Na batteries. An ideal solid electrolyte must have high ionic conductivity, hold outstanding chemical and electrochemical stability, and employ low‐cost synthetic methods. Achieving the combination of these properties is a grand challenge for the synthesis of sulfide‐based solid electrolytes. Design of the solid electrolyte Na₃SbS₄ is described, realizing excellent air stability and an economic synthesis based on hard and soft acid and base (HSAB) theory. This new solid electrolyte also exhibits a remarkably high ionic conductivity of 1 mS cm^?1 at 25 °C and ideal compatibility with a metallic sodium anode.