GaN发光二极管表观电容极值分析

利用正向交流(ac)小信号方法对GaN发光二极管的电容-电压特性进行测量,可以观察到GaN发光二极管中的负电容现象。正向偏压越大,测试频率越低,负电容现象越明显。测量到的负电容现象是表象,不存在负电容;提出GaN发光二极管p-n结的结电容在特定的正向电压范围内等效于可变电容。分析可变电容对正向交流小信号响应得到:特定参数的可变电容使结电容电流相位落后于交流小信号电压相位π/2,使得在测量中表现为负电容。发现表观电容-正向电压曲线的极值点与理论模型相吻合,证明了该理论模型的正确性。     

Implementation of a Two-Atom √swap Gate in Cavity QED

We implement a two-atom √swap Bate via cavity QED. During the preparation, a cavity-assisted collision betweenatoms is required, and this does not need any auxiliary atom. The cavity is only virtually excited, thus our scheme is insensitive to the cavity field states and to the cavity decay. The scheme can be implemented by the present cavity QED techniques.     

Ab Initio Calculations of Differential Cross Sections for Single Charge Transfer in ^3He^2＋ ＋ ^4He Collisions

The single charge transfer process in ^3He^2＋ ＋ ^4He collisions is investigated using the quantum-mechanical molecular- orbital close-coupling method, in which the adiabatic potentials and radial couplings are calculated by using the ab initio multireference single- and double-excitation configuration interaction methods. The differential cross sections for the single charge transfer are presented at the laboratorial energies E = 6 keV and lOkeV for the projectile ^3He^2＋. Comparison with the existing data shows that the present results are better in agreement with the experimental measurements than other calculations in the dominant small angle scattering, which is attributed to the accurate calculations of the adiabatic potentials and the radial couplings.     

From Discreteness to Continuity： Dislocation Equation for Two-Dimensional Triangular Lattice

A systematic method from the discreteness to the continuity is presented for the dislocation equation of the triangular lattice. A modification of the Peierls equation has been derived strictly. The modified equation includes the higher order corrections of the discrete effect which are important for the core structure of dislocation. It is observed that the modified equation possesses a universal form which is model-independent except the factors. The factors, which depend on the detail of the model, are related to the derivatives of the kernel at its zero point in the wave-vector space. The results open a way to deal with the complicated models because what one needs to do is to investigate the behaviour near the zero point of the kernel in the wave-vector space instead of calculating the kernel completely.     

改进实验方法减小系统误差

电阻测量的设计性实验,不仅是实验教学的重点,也是近几年高考的热点．然而学生在做测量电阻和电流表内阻的实验时,由于受实验器材所限和实验方法不尽合理,造成了较大的系统误差．针对实际问题,本人对实验方法作了一些改进,可使实验既能顺利开展,还能减小系统误差．1半偏法测电流表的内阻教材中所采用的电路图如图1所示,图中R为变阻器,R′为电阻箱．实验方法及原理如下：合上开关S_1,断开S_2,调节R的阻值,使电流表指针偏转到满刻度；保持R不变,再合上开关S_2,调节电阻箱R′,使电流表指针偏转到正好是满刻度的一半,读出     

抽取信号的χ2分布拟合方法

BESⅡ上测量ψ(2S)辐射衰变时, 鉴于本底道的污染非常严重, 提出了一种抽取信号事例数的χ²拟合方法. 大量的蒙特卡罗模拟表明, 信号道与各个本底道的χ²分布形状各不相同. 这些特点提供了从数据的χ²分布中抽出信号道事例数的χ²拟合方法. 从蒙特卡罗模拟的结果来看, χ²拟合方法的误差小于2%.     

直接解调成像的快速算法

直接解调方法(Direct Demodulate Method, DD)中运用的最多的迭代方法是Richardson-Lucy (RL)迭代. RL迭代的公式可以改写成矩阵形式, 其中包含了主要计算量的两次矩阵乘法在点扩展函数满足平移不变性的情况下可以写成卷积的形式, 而卷积可以使用快速傅里叶变换(Fast Fourier Transform, FFT)做快速计算. 详细介绍了上述过程, 并将该方法应用到了硬X射线调制望远镜(Hard X-ray Modulate Telescope,HXMT)的DD成像中, 通过理论的和模拟的计算对比了优化前后DD方法对计算资源的开销.     

氢离子与里德堡态锂原子碰撞中的电荷转移过程

利用双中心原子轨道强耦合方法研究了H+离子与里德堡态的Li(5d)原子碰撞的电荷转移过程,计算了5d电子转移到氢原子各个次壳层的态选择截面及总截面.研究了态选择截面随俘获电子主量子数及角量子数变化的规律,并尝试给出了解析的标度关系;探讨了标度规律随入射粒子能量的变化,分析了高激发态电子电荷转移过程的动力学机制.     

基于叠栅技术的二维亚波长周期结构成像设计

用光子学方法研究了叠栅技术中,当试件光栅被拉压和旋转后,叠栅条纹的空间周期和相对于基准光栅的取向,试件光栅被拉压后的节距等相关问题。根据衍射光波的空间周期可能大于试件光栅空间周期的特点,对二维亚波长周期结构衍射成像进行了设计研究。首先,对二维亚波长周期结构衍射物进行编码,以获得包含编码光栅空间信息的均匀波;其次,使编码得到的均匀波通过光学系统,并被放大到CCD相机所能辨识的大小;再次,经解码光栅解码,滤掉编码波,最终获得二维亚波长周期结构物的空间结构信息,达到超分辨的目的。同时,对成像过程进行了较为详尽的分析,对编码器、解码器的位置以及它们相对衍射物的取向进行了设计研究,对滤波器的选择给予了必要的说明,指出了取得超分辨成像的关键。     

利用改进型衍射理论对直边衍射效应的解释

利用改进型衍射理论MTPO（Modified Theory of Physics Optics）对直边衍射现象做出了解释．用数值模拟方法得出了直边衍射场强随衍射角度的变化曲线，并与广泛采用的菲涅耳近似衍射方法结果进行比较，发现在很大的角度空间上，二者所得出的衍射场强与精确解吻合较好．但在入射波的几何传播方向上，即边缘上的衍射场强分布，MTPO方法则具有更高的准确度．