Ar?NO团簇的同步辐射光电离研究

利用国家同步辐射实验室合肥光源的真空紫外同步辐射，使NO分子和Ar原子混合物的超声分子束发生光电离，测量了Ar，NO和异类团簇Ar·NO的光电离效率谱. 在谱中，在与Ar原子的共振线对应的能量区域(11.5—12.0 eV)观察到一个强的类共振结构. 这个结果表明，在异类团簇Ar·NO的内部，稀有气体Ar原子的激发能转移到与它接触的分子NO上，使分子NO发生电离. 关键词： Ar·NO团簇 同步辐射 光电离 能量转移     

介质加载环板慢波结构高频特性研究

 提出了一种适用于环板结构的计算等效相对介电常数的方法，利用变分法导出了介质加载环板慢波结构的色散方程和耦合阻抗表达式。计算结果表明，介质加载能够有效降低环板慢波结构的工作电压。计算结果与CST-MWS的模拟结果吻合良好，说明所提出的计算等效相对介电常数的方法和计算色散方程的方法对环板慢波结构是切实可行的。     

单甲基原位改性SiO2疏水减反膜的制备与性能研究

 在碱性条件下通过TEOS和MTES的共水解缩聚反应制备了单甲基原位改性的SiO₂溶胶，并使用提拉法在K9玻璃基片上镀制了疏水减反膜。通过透射电镜（TEM）考察了镀膜溶胶的微结构，分别使用红外光谱（FTIR）分析了薄膜的组分，用原子力显微镜（AFM）观察了薄膜的表面形貌和起伏状况，用紫外可见光谱（UV-vis）考察了薄膜的减反射性能，用接触角仪测量了薄膜对水的接触角。并使用“R-on-1”的方式测量了薄膜在Nd:YAG激光（1 064 nm，1 ns）作用下的损伤阈值。结果表明，通过共水解缩聚反应可以把甲基引入镀膜溶胶簇团中，改善了溶胶簇团的网络结构，使薄膜得到相当好的疏水性能和更好的抗激光损伤性能，同时薄膜能保持较好的减反射性能。     

40Ar+238U 实验介绍

主要介绍了利用兰州重离子加速器提供的270 MeV的40Ar离子束轰击238U靶，通过熔合蒸发反应进行试合成Z=110附近的新同位素的实验情况。分析了目前关于超重核研究的现状并描述了这次实验的目的、 可行性分析、 实验装置以及实验过程等。本次实验仍然用氦喷嘴技术对产物进行传输， 并用一套具有数对探测器组的转轮收集探测系统对产物进行收集和测量。 The state of the experiment to produce the new isotopes around Z=110 are presented in this paper. The emphasis is laid upon introducing the experiment purpose, the set up and the feasibility for producing this objective nuclide. In the experiment the new isotopes were produced by the complete fusion evaporation reaction of 238U with 270 MeV 40Ar at the Sector Focus Cyclotron (SFC) of Heavy Ion Research Facility in Lanzhou(HIRFL). The reaction products were also transported and collected by using the helium jet technique and rotating wheel apparatus.     

在不同激光脉宽下的高次谐波

用数值计算方法计算了不同强激光脉冲宽度下高次谐波的产生.我们发现对于激光场强度不高,不能有效电离初态的激光场,长脉冲宽度可以更有效产生高次谐波;而对于高场强的激光场,由于它能够在几个光学周期之内把原子的初态全部电离,所以短脉冲的激光场能够更有效产生高次谐波.     

均苯三甲酸铕及铕镧配合物的合成及荧光性质

以均苯三甲酸为配体,水热条件下合成了均苯三甲酸铕及铕镧系列发光配合物La_xEu_1-x(BTC)·nH₂O(x=0,0.1,0.3,0.5,0.7,0.9),通过元素分析及化学滴定法测定了配合物的组成。用红外光谱对其进行了表征,确定了该系列配合物的组成为La_xEu_1-x(BTC)·nH₂O。研究了系列配合物的荧光性质,荧光光谱表明:该类配合物均能发出强的铕离子的特征荧光,并且镧元素的掺入能增强铕配合物的发光强度,但发射峰的位置基本上没有变化;其中⁵D₀→⁷F₁和⁵D₀→⁷F₂的跃迁发射较强,且均劈裂为两个峰(587,593nm)和(611,618nm),这是由于铕离子所处的配位环境引起的。     

基于液晶光阀的全息照相控光仪

设计了通过液晶光阀自动调整全息照相物光和参考光辐照比至最佳状态,同时能实现曝光时间自动控制的控光仪.该仪器巧妙运用液晶光阀和硅光电池器件,使测量、调整、自控一体化,从而提高拍摄优质全息图的工作效率.     

Ultrasound imaging and evaluation of lesion induced by High Intensity Focused Ultrasound

The present study was to investigate the differential imaging method for detecting HIFU (High Intensity Focused Ultrasound)-induced lesions and the estimation of variation of attenuation for lesion evaluation with log spectral difference algorithm. Experiment results of bovine muscle and liver in vitro were acquired. Several algorithms for lesion detection - Absolute Difference (AD), Sum Absolute Differences (SAD) and Sum Squared Differences (SSD) - were analyzed with several window sizes and threshold values. Then three attenuation parameters were compared to evaluate the degree of tissue damage. It was found that variation of the mean attenuation △α was an effective parameter to evaluate lesions.     

Speech emotion recognition based on statistical pitch model

A modified Parzen-window method, which keep high resolution in low frequencies and keep smoothness in high frequencies, is proposed to obtain statistical model. Then, a gender classification method utilizing the statistical model is proposed, which have a 98% accuracy of gender classification while long sentence is dealt with. By separation the male voice and female voice, the mean and standard deviation of speech training samples with different emotion are used to create the corresponding emotion models. Then the Bhattacharyya distance between the test sample and statistical models of pitch, are utilized for emotion recognition in speech. The normalization of pitch for the male voice and female voice are also considered, in order to illustrate them into a uniform space. Finally, the speech emotion recognition experiment based on K Nearest Neighbor shows that, the correct rate of 81% is achieved, where it is only 73.85% if the traditional parameters are utilized.     

直径对脉冲爆震发动机性能的影响

本文通过实验研究了脉冲爆震发动机的直径对其性能的影响．实验结果表明；当爆震室的直径增大时，爆震波压力波形相似，平均峰值压力比较接近，且比冲基本保持不变，而推力则随爆震室直径的增大而增大。实验曲线表明爆震室内的流动具有自相似性，从而为建立尺寸律提供了实验依据．本文中比冲和平均推力是利用摆动原理测量的，并与由作用在推力壁上的压力计算得出的比冲和平均推力的理论值和实验值进行了比较，结果基本吻合，说明该测量方法可行．