功能梯度压电压磁材料粘结的Ⅲ型裂纹问题

利用奇异积分方程方法研究两个半无限大的功能梯度压电压磁材料粘结,在渗透和非 渗透边界条件下的III型裂纹问题. 首先通过积分变换构造出原问题的形式解，然 后利用边界条件通过积分变换与留数定理得到一组奇异积分方程， 最后利用Gauss-Chebyshev方法进行数值 求解，讨论材料参数、材料非均匀参数以及裂纹几何形状等对裂纹尖端应力 强度因子的影响. 从结果中可以看出，压电压磁复合材料中反平面问题的应力奇异性 形式与一般弹性材料中的反平面问题应力奇异形式相同，但材料梯度参数对功能梯度压电压 磁复合材料中的应力强度因子和电位移强度因子有很大的影响.     

功能梯度压电压磁材料中断裂问题分析

分析了功能梯度压电/压磁材料中裂纹在反平面剪切载荷下的断裂问题. 为了便于分析，假设材料性质沿着裂纹的法线方向呈指数变化. 利用Fourier变换，问题可以转化为对未知数是裂纹表面张开位移的一对对偶积分方程的求解，此对偶积分方程采用Schmidt方法求解. 最后分析了裂纹长度及表征功能梯度材料的参数βl对应力，电位移和磁通量强度因子的影响.     

非均匀弹性材料中反平面的运动裂纹

用解析方法研究了非均匀弹性材料中反平面运动裂纹问题。首先采用余弦变换求解非均匀材料的基本方程，然后根据混合边值条件建立裂纹运动的对偶积分方程，再把对偶积分方程化为第二类Fredholm积分方程。给出了数值算例，计算结果表明材料的非均匀性对动应力强度因子有较大的影响。     

功能梯度压电压磁材料中裂纹对SH波的散射

研究无限大功能梯度压电/压磁复合材料中裂纹对SH波的散射问题.为了便于分析,假设材料性质沿着裂纹的法线方向是指数变化.利用Fourier余弦变化,将问题转化为对偶积分方程的求解,此对偶积分方程采用Copson方法求解.然后求得应力强度因子、电位移强度因子、磁通量强度因子的解析表达式,最后数值算例给出了材料参数、入射角及波数对标准动应力强度因子的影响.     

黏弹性体界面裂纹的冲击响应

研究两半无限大黏弹性体界面Griffith裂纹在反平面剪切突出载荷下,裂纹尖端动应力强度因子的时间响应,首先,运用积分变换方法将黏弹性混合黑社会问题化成变换域上的对偶积分方程,通过引入裂纹位错密度函数进一步化成Cauchy型奇异积分方程,运用分片连续函数法数值求解奇异积分方程,得到变换域内的动应力强度因子,再用Laplace积分变换数值反演方法,将变换域的解反演到时间域内,最终求得动应力强度因子的时间响应,并对黏弹性参数的影响进行分析。     

功能梯度材料与均质材料交界面上Ⅰ-型裂纹对简谐动载的响应分析

在忽略界面裂尖端裂纹面相互叠入的条件下,对功能梯度材料与均质材料交界面上Ⅰ-型裂纹对简谐动载响应问题进行了分析。利用傅立叶变换,将问题的求解转换为对以裂纹面上位移差为未知函数的对偶积分方程的求解。为了求解对偶积分方程,将裂纹面上的位移差函数展开为雅可毕多项式的级数形式。最终给出了裂纹长度、入射波频率和材料性质对应力强度的影响。结果表明,当界面材料不连续时,获得了具有普通1/2奇异性的近似解。     

功能梯度压电板条中电绝缘型运动裂纹的电弹性场

基于三维弹性理论和压电理论，对材料系数按指数函数规律分布的功能梯度压电板条中的反平面运动裂纹问题进行了求解。利用Fourier积分变换方法将电绝缘型运动裂纹问题化为对偶积分方程，并进一步归结为易于求解的第二类Fredholm积分方程。通过渐近分析，获得了裂纹尖端应力、应变、电位移和电场的解析解，给出了裂纹尖端场各个变量的角分布函数，并求得了裂纹尖端场的强度因子，分析了压电材料物性梯度参数、几何尺寸及裂纹运动速度对它们的影响。结果表明，对于电绝缘型裂纹，功能梯度压电板条中运动裂纹尖端附近的各个场变量都具有-1／2阶的奇异性；当裂纹运动速度增大时，裂纹扩展的方向会偏离裂纹面。     

插值矩阵法分析与复合材料界面相交的平面裂纹奇异应力场

提出了用插值矩阵法分析与各向异性材料界面相交的平面裂纹应力奇异性。基于V形切口尖端附近区域位移场渐近展开,将位移场的渐近展开式的典型项代入线弹性力学基本方程,得到关于平面内与复合材料界面相交的裂纹应力奇异性指数的一组非线性常微分方程的特征值问题,运用插值矩阵法求解,获得了平面内各向异性结合材料中与界面以任意角相交的裂纹尖端的应力奇异性指数随裂纹角的变化规律,数值计算结果与已有结果比较表明,本文方法具有很高的精度和效率。     

薄膜涂层材料中币形界面裂纹的弹性波散射

研究了薄膜涂层材料中币形界面裂纹的弹性波散射问题,建立了含有币形界面裂纹的覆层半空间模型,采用Hankel积分变换,将裂纹对弹性波散射的问题转化为求解矩阵形式的奇异积分方程。结合渐近分析和围道积分技术得到积分方程的解,进一步推导了散射波的应力场和位移场,以及动应力强度因子的理论计算公式。在数值算例中,分析了不同材料组合和裂纹尺寸情况下动应力强度因子与入射波频率的关系,并给出了裂纹张开位移的结果。为薄膜涂层材料的动态破坏分析提供了一定的理论基础。     

SH波对一维六方准晶中直裂纹的散射

分析了SH波对一维六方准晶中直裂纹的散射问题。利用积分变换技术,结合Copson方法,通过求解对偶积分方程,得到声子场和相位子场应力、位移及裂纹尖端动应力强度因子的解析表达式。通过数值算例讨论了裂纹长度、入射角和入射波频率对标准动应力强度因子的影响,此研究在工程材料应用中有一定的参考价值。     

Scattering of harmonic anti-plane shear waves by an interface crack in magneto-electro-elastic composites

IntroductionCompositematerialconsistingofapiezoelectricphaseandapiezomagneticphasehasdrawnsignificantinterestinrecentyears,duetotherapiddevelopmentinadaptivematerialsystems .Itshowsaremarkablylargemagnetoelectriccoefficient,thecouplingcoefficientbetweenst…     

DYNAMIC BEHAVIOR OF TWO PARALLEL SYMMETRY CRACKS IN MAGNETO-ELECTRO-ELASTIC COMPOSITES UNDER HARMONIC ANTI-PLANE WAVES

The dynamic behavior of two parallel symmetry cracks in magneto-electro-elastic composites under harmonic anti-plane shear waves is studied by Schmidt method. By using the Fourier transform, the problem can be solved with a pair of dual integral equations in which the unknown variable is the jumps of the displacements across the crack surfaces. To solve the dual integral equations, the jumps of the displacements across the crack surface were expanded in a series of Jacobi polynomials. The relations among the electric filed, the magnetic flux and the stress field were obtained. From the results, it can be obtained that the singular stresses in piezoelectric/piezomagnetic materials carry the same forms as those in a general elastic material for the dynamic anti-plane shear fracture problem. The shielding effect of two parallel cracks was also discussed.     

MULTIPLE PARALLEL SYMMETRIC PERMEABLE MODEL-Ⅲ CRACKS IN A PIEZOELECTRIC/PIEZOMAGNETIC COMPOSITE MATERIAL PLANE

In this paper, the interactions of multiple parallel symmetric and permeable finite length cracks in a piezoelectric/piezomagnetic material plane subjected to anti-plane shear stress loading are studied by the Schmidt method.The problem is formulated through Fourier transform into dual integral equations, in which the unknown variables are the displacement jumps across the crack surfaces.To solve the dual integral equations, the displacement jumps across the crack surfaces are directly expanded as a series of Jacobi polynomials.Finally, the relation between the electric field, the magnetic flux field and the stress field near the crack tips is obtained.The results show that the stress, the electric displacement and the magnetic flux intensity factors at the crack tips depend on the length and spacing of the cracks.It is also revealed that the crack shielding effect presents in piezoelectric/piezomagnetic materials.     

Coupled field state around three parallel non-symmetric cracks in a piezoelectric/piezomagnetic material plane

In this paper, the behavior of three parallel non-symmetric permeable cracks in a piezoelectric/piezomagnetic material plane subjected to anti-plane shear stress loading was studied by the Schmidt method. The problem was formulated through Fourier transform into three pairs of dual integral equations, in which unknown variables are jumps of displacements across the crack surfaces. To solve the dual integral equations, the jumps of displacements across the crack surfaces were directly expanded as a series of Jacobi polynomials. Finally, the relations among the electric displacement, the magnetic flux and the stress fields near the crack tips can be obtained. The results show that the stress, the electric displacement and the magnetic flux intensity factors at the crack tips depend on the lengths and spacing of cracks. It was also revealed that the crack shielding effect is present in piezoelectric/piezomagnetic materials.     

On anti-plane shear behavior of a Griffith permeable crack in piezoelectric materials by use of the non-local theory

In this paper, the non-local theory of elasticity is applied to obtain the behavior of a Griffith crack in the piezoelectric materials under anti-plane shear loading for permeable crack surface conditions. By means of the Fourier transform the problem can be solved with the help of a pair of dual integral equations with the unknown variable being the jump of the displacement across the crack surfaces. These equations are solved by the Schmidt method. Numerical examples are provided. Unlike the classical elasticity solutions, it is found that no stress and electric displacement singularity is present at the crack tip. The non-local elastic solutions yield a finite hoop stress at the crack tip, thus allowing for a fracture criterion based on the maximum stress hypothesis. The finite hoop stress at the crack tip depends on the crack length and the lattice parameter of the materials, respectively. The project supported by the National Natural Science Foundation of China (50232030 and 10172030)     

ANALYSIS OF THE DYNAMIC BEHAVIOR OF A GRIFFITH PERMEABLE CRACK IN PIEZOELECTRIC MATERIALS WITH THE NON-LOCAL THEORY

The dynamic behavior ofa Griffith permeable crack under harmonic anti-plane shearwaves in the piezoelectric materials is investigated by use of the non-local theory.To overcome themathematical difficulties,a one-dimensional non-local kernel is used instead of a two-dimensionalone for the anti-plane dynamic problem to obtain the stress and the electric displacement near thecrack tips.By means of Fourier transform,the problem can be solved with a pair of dual integralequations that the unknown variable is the jump of the displacement across the crack surfaces.These equations are solved with the Schmidt method and numerical examples are provided.Con-trary to the previous results,it is found that no stress and electric displacement singularities arepresent at the crack tip.The finite hoop stress and the electric displacement depend on the cracklength,the lattice parameter of the materials and the circle frequency of the incident waves.Thisenables us to employ the maximum stress hypothesis to deal with fracture problems in a naturalway.     

The behavior of a crack in functionally graded piezoelectric/piezomagnetic materials under anti-plane shear loading

Summary In this paper, the behavior of a crack in functionally graded piezoelectric/piezomagnetic materials subjected to an anti-plane shear loading is investigated. To make the analysis tractable, it is assumed that the material properties vary exponentially with the coordinate parallel to the crack. By using a Fourier transform, the problem can be solved with the help of a pair of dual integral equations in which the unknown variable is the jump of the displacements across the crack surfaces. These equations are solved using the Schmidt method. The relations among the electric displacement, the magnetic flux and the stress field near the crack tips are obtained. Numerical examples are provided to show the effect of the functionally graded parameter on the stress intensity factors of the crack.The authors are grateful for financial support from the Natural Science Foundation of Hei Long Jiang Province (A0301), the National Natural Science Foundation of China (50232030, 10172030), the Natural Science Foundation with Excellent Young Investigators of Hei Long Jiang Province(JC04-08) and the National Science Foundation with Excellent Young Investigators (10325208).     

Dynamic behavior of two collinear interface cracks between two dissimilar functionally graded piezoelectric/piezomagnetic material strips

The dynamic interaction of two collinear interface cracks between two dissimilar functionally graded piezoelectric/piezomagnetic material strips subjected to the anti-plane shear harmonic stress waves was investigated. By using the Fourier transform, the problem can be solved with the help of a pair of triple integral equations in which the unknown variable is jump of displacement across the crack surfaces. These equations are solved using the Schmidt method. Numerical examples are provided to show the effect of the functionally graded parameter, the circular frequency of the incident waves and the thickness of the strip upon stress, electric displacement and magnetic flux intensity factors of cracks.     

THE BASIC SOLUTION OF A 3-D RECTANGULAR PERMEABLE CRACK IN A PIEZOELECTRIC/PIEZOMAGNETIC COMPOSITE MATERIAL

The solution of a 3-D rectangular permeable crack in a piezoelectric/piezomagnetic composite material was investigated by using the generalized Almansi’s theorem and the Schmidt method.The problem was formulated through Fourier transform into three pairs of dual integral equations,in which the unknown variables are the displacement jumps across the crack surfaces.To solve the dual integral equations,the displacement jumps across the crack surfaces were directly expanded as a series of Jacobi polynomials.Finally,the relations between the electric filed,the magnetic flux field and the stress field near the crack edges were obtained and the efects of the shape of the rectangular crack on the stress,the electric displacement and magnetic flux intensity factors in a piezoelectric/piezomagnetic composite material were analyzed.     

SCATTERING OF HARMONIC ANTI-PLANE SHEAR STRESS WAVES BY A CRACK IN FUNCTIONALLY GRADED PIEZOELECTRIC/PIEZOMAGNETIC MATERIALS

In this paper, the dynamic behavior of a permeable crack in functionally graded piezoelectric/piezomagnetic materials is investigated. To make the analysis tractable, it is assumed that the material properties vary exponentially with the coordinate parallel to the crack. By using the Fourier transform, the problem can be solved with the help of a pair of dual integral equations in which the unknown is the jump of displacements across the crack surfaces. These equations are solved to obtain the relations between the electric filed, the magnetic flux field and the dynamic stress field near the crack tips using the Schmidt method. Numerical examples are provided to show the effect of the functionally graded parameter and the circular frequency of the incident waves upon the stress, the electric displacement and the magnetic flux intensity factors of the crack.