Microwave reflection properties of planar anisotropy FesoNi50 powder/paraffin composites

The reflection properties of planar anisotropy Fe50Ni50 powder/paraffin composites have been studied in the microwave frequency range.The permeability of Fe50Ni50 powder/paraffin composites is greatly enhanced by introducing the planar anisotropy,and can be further enhanced by using a rotational orientation method.The complex permeability can be considered as the superposition of two types of magnetic resonance.The resonance peak at high frequency is attributed to the natural resonance,while the peak at low frequency is attributed to the domain-wall resonance.The simulated results of the microwave reflectivity show that the matching thickness,peak frequency,permeability,and permittivity are closely related to the quarter wavelength matching condition.The Fe50Ni50 powder/paraffin composites can be attractive candidates for thinner microwave absorbers in the L-band(1-2 GHz).     

Microwave reflection properties of planar anisotropy Fe50Ni50 powder/paraffin composites

The reflection properties of planar anisotropy Fe₅₀Ni₅₀ powder/paraffin composites have been studied in the microwave frequency range. The permeability of Fe₅₀Ni₅₀ powder/paraffin composites is greatly enhanced by introducing the planar anisotropy, and can be further enhanced by using a rotational orientation method. The complex permeability can be considered as the superposition of two types of magnetic resonance. The resonance peak at high frequency is attributed to the natural resonance, while the peak at low frequency is attributed to the domain-wall resonance. The simulated results of the microwave reflectivity show that the matching thickness, peak frequency, permeability, and permittivity are closely related to the quarter wavelength matching condition. The Fe₅₀Ni₅₀ powder/paraffin composites can be attractive candidates for thinner microwave absorbers in the L-band (1-2 GHz).     

具有横向磁晶各向异性的钴纳米线的微波吸收性能

使用电化学脉冲沉积法制备了磁晶各向异性易磁化方向(c轴)垂直纳米线长轴方向的钴纳米线.受到磁晶各向异性、静磁相互作用等因素与形状各向异性相互竞争的结果,纳米线阵列的磁滞回线显示出较弱的磁各向异性.此外,在2—18 GHz频率范围内,纳米线/石蜡复合材料的介电色散谱的虚部在5 GHz处有一个主峰,在10 GHz附近有一个较弱的峰;德拜弛豫特性和材料的电导率对这两个峰的形成均有贡献.同时,其磁导率色散谱的虚部在频率为6.1 GHz处有一个主峰,在10 GHz以上有两个较微弱的峰. 前一个峰源于自 关键词： 钴纳米线 介电色散谱 磁导率色散谱 微波吸收剂     

Microwave absorption properties of the Ni nanofibers fabricated by electrospinning

Ni nanofibers with an average diameter of about 100 nm were synthesized by a simple and cost-effective electrospinning technology. The nanofibers have a polycrystalline structure and each nanofiber is composed of fine particles. The complex permittivity and permeability properties of Ni nanofibers composite have been measured in the frequency range of 1–15 GHz. The double-resonance behavior of microwave magnetic permeability is observed. Natural resonance peak happens at 4.0 GHz with the contribution of shape anisotropy. The second resonance peak around 12.5 GHz originates from exchange resonance effect. The permeability spectra were fitted with the Landau–Lifshitz–Gibert equation. The minimum reflection loss of the Ni nanofibers composite reaches ?35.4 dB at 1.3 GHz with a matching thickness of 8.4 mm, which shows promising application of the Ni nanofibers composites in microwave absorber.     

Influence of Thermal Annealing on the Electrical and Gas-Sensitive Properties of MOS Silicon-Based Tunnel Diodes

Results of an experimental investigation into the influence of short-term (10 min) thermal annealing of MOS tunnel diodes on their electrical properties and capacitance, admittance, and flat-band voltage responses to the action of hydrogen are presented. Thermal annealing was performed in vacuum and in the room atmosphere at 573, 613, 653, and 673 K. Vacuum annealing at the temperatures studied was found to decrease the flat-band voltage and dramatically increase the capacitance and admittance responses. As-vacuum-annealed MOS diodes can be used as gas-sensitive elements at zero voltage. Annealing in the room atmosphere produces roughly the same effects at 573 K. As the annealing temperature is increased to 613 K, the gas-sensitive properties of MOS diodes are drastically impaired.     

Relevant, systematic variation of morphology and magnetism according to annealing in InMnP:Zn

InMnP:Zn epilayers doped with Mn (0.290 at.%) were annealed at 723-873 K for 60 s and 473-573 K for 30 min. Using Auger electron spectroscopy, the changes in concentration profiles of the epilayers correlated to the ferromagnetic origin as a function of the annealing conditions. The epilayers annealed at 723-873 K for 60 s exhibited InMn₃ persisting up to 583 K. For InMnP:Zn epilayers annealed at 523-573 K for 30 min, the concentration depth profiles remained flat so that the stoichiometry was well maintained without precipitates such as InMn₃ and MnP comparable to the as-grown InP:Zn before doping Mn. These samples showed clear ferromagnetic hysteresis loops. Curie temperature was about 150 K. A ferromagnetic hysteresis loop was obtained even at very lower annealing temperature of 473 K.     

Tuning of electromagnetic wave absorbing properties in Fe-deficient SrFe9.6-xCo1.2Ti1.2O19 hexaferrite-epoxy composites

We report the tunable electromagnetic (EM) wave absorption properties of Fe-deficient SrFe_9.6-xCo_1.2Ti_1.2O₁₉ hexaferrite–epoxy composites. SrFe_9.6-xCo_1.2Ti_1.2O₁₉ hexaferrite powders were prepared via solid-state reaction routes. It was observed that Sr–Ti-rich second phases were formed as x increased, i.e., the Fe content decreased. The ferromagnetic resonance (FMR) frequency of the composites gradually decreased from 8.8 GHz to 4.8 GHz with increasing x, and accordingly, the EM absorption frequency range also gradually changed. The gradual FMR frequency shift was attributed to the compositional shift in the mother phase. It is predicted that the Fe deficiency caused a decrease in the magnetocrystalline anisotropy, and in turn, it shifted the FMR frequency and modified the corresponding EM absorbing properties. All the samples demonstrated a high EM absorption performance with the lowest reflection loss of < −40 dB at the optimized frequency and thickness.     

EPR of Yb<Superscript>3+</Superscript> ions in a monoclinic KY(WO<Subscript>4</Subscript>)<Subscript>2</Subscript> single crystal

The electron paramagnetic resonance (EPR) of Yb³⁺ ions in a KY(WO₄)₂ single crystal was investigated at T=4.2 K and fixed frequency of 9.38 GHz. The resonance absorption observed on the lowest Kramers doublet represents the complex superposition of three spectra, corresponding to the ytterbium isotopes with different nuclear moments. The EPR spectrum is characterized by a strong anisotropy of the g-factors. The temperature dependence of the g-factors is shown to be caused by the strong spin-orbital and orbital-lattice coupling. The resonance lines broaden with increasing temperature due to the short spin-lattice relaxation times.     

Color centers in neutron-irradiated Y3Al5O12, CAF2 and LiF single crystals

The thermal annealing behavior of the Y₃Al₅O₁₂, CaF₂ and LiF single crystals bombarded at Algiers with reactor neutrons has been monitored by optical absorption spectroscopy. The irradiation was performed at about 315 K. On heating samples after irradiation, the optical absorption bands decrease and disappear completely at 873 and 523 K in the case of Y₃Al₅O₁₂ and CaF₂, respectively. Activation energies of 1.2±0.02 and 0.9±0.2 eV are estimated for Y₃Al₅O₁₂ and CaF₂, respectively. On the other hand, the LiF crystal shows a complex annealing behavior. Here, the optical absorption spectrum presents different shapes after each annealing temperature. Four steps are distinguished and discussed on heating samples from 300 to 673 K. Above 673 K, the absorption drops by about 50%; it completely disappears at 773 K.     

Comparison of ferromagnetic resonance between amorphous wires and microwires

Measurements of magnetoimpedance in amorphous wires and microwires at the GHz region are presented here. The maxima observed in the magnetoimpedance of different samples in the high frequency range are attributed to the ferromagnetic resonance (FMR) that occurs when a sample is submitted to a longitudinal static magnetic field and an oscillating transversal field. While the appearance of a peak on the resistance and the drop of the inductance is explained by means of FMR, the dependence of the width of that resonance with different parameters (magnetic field, stress distribution, sample size, etc.) is not clearly understood, and therefore additional works to explain the value of the resonance width are needed. It is interesting to consider firstly, the influence of the diameter of the sample and thus the stress distribution on the FMR. The size and position of the FMR is found to be completely different for diameters ranging from 24 to 171 μm. The dependence of the frequency value at which the peak of the resistance is found can be explained by the different values of the anisotropy field in the sample. The width of the FMR changes drastically with the diameter of the sample and with the applied magnetic field and they will be discussed in this paper.     

Aluminium-based amorphous and nanocrystalline alloys with Fe impurity

Aluminium-based rapidly quenched alloys of nominal composition of Al₉₀Fe₇Nb₃ and Al₉₄Fe₂V₄ were studied by Mössbauer spectroscopy. Samples annealed up to 573K showed amorphous structure represented by quadrupole-split doublets. From the corrected spectra areas, the values of f-factor and Debye temperature were calculated for both samples in the as-cast state. In the case of AlFeNb sample, f-factor was estimated to be f = 0.26 and for AlFeV, f = 0.31. High-temperature annealing at 773K and 873K induced a formation of nano-and microcrystalline structures. Mössbauer spectra of both compositions (with vanadium as well as with niobium) annealed at 773K showed superposition of crystalline phases with dominant contribution of Al₃Fe alloy. During annealing at 873K, phases with large grains and a small amount of the FeAl metastable phase were developed.     

Microwave properties and surface topography of softmagnetic films with high resistivity

A single layer of CoFeB and a multilayer of CoFeB--MgO films are prepared by means of DC/RF magnetron sputter deposition. The excellent microwave properties and high electrical resistivity are simultaneously achieved in the discontinuous multilayer structure of [Co₄₄Fe₄₄B₁₂(0.7nm)/MgO(0.4nm)]_{40} film. This film has a high permeability ({μ \prime }) (larger than 100 below 2.1GHz), a high magnetic loss (μ') (larger than 100 in a range from 1.5 to 3.3GHz), a resistivity of 3.3× 10^*     

Surface photovoltage properties and photocatalytic activities of nanocrystalline CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript> particles with porous superstructure fabricated by a modified chemical coprecipitation method

In this study, nanocrystalline CoFe₂O₄ particles with porous timber-like superstructure were synthesized by a modified chemical co-precipitation route with calcination temperatures of 573, 673, 773, 873, and 973 K, respectively. The structural properties of the samples were systematically investigated by X-ray powder diffraction, scanning electronic microscopy, energy-dispersive X-ray spectra, UV–Vis diffuse reflectance spectroscopy, and Fourier transform infrared spectroscopy techniques. The photo-induced charge separation in the samples was demonstrated by surface photovoltage (SPV) measurement. The photocatalytic performances of the CoFe₂O₄ samples were comparatively studied by the degradation of 4-chlorophenol under Xe lamp irradiation. The results indicated that the sample calcined at 673 K exhibited the highest photocatalytic efficiency among the five samples.     

Structural phase transitions in Cu2–x Te crystals (x = 0.00, 0.10, 0.15, 0.20, 0.25)

Structural phase transitions in Cu_2–x Te crystals have been investigated by high-temperature X-ray diffraction.

At room temperature Cu₂Te and Cu_1.90Te specimens are two-phased, i.e. they consist of an orthohombic phase with a = 7.319, b = 22.236, c = 36.458 Å and a hexagonal phase with a = 4.150, c = 7.188 Å. The changes in both compounds take place generally in the hexagonal phase with increasing temperature. At 821, 873 K they transform to a FCC phase. Monocrystals of the other compounds at room temperature crystallize in the hexagonal system and at 673, 773, 723 K, respectively, they transform to a FCC phase. It is determined that as the cation deficiency increases the crystal quality becomes better.     

Angular control of multi-mode resonance frequencies in obliquely deposited CoZr thin films with rotatable stripe domains

We investigate the angular-dependent multi-mode resonance frequencies in CoZr magnetic thin films with a rotatable stripe domain structure.A variable range of multi-mode resonance frequencies from 1.86 GHz to 4.80 GHz is achieved by pre-magnetizing the CoZr films along different azimuth directions,which can be ascribed to the competition between the uniaxial anisotropy caused by the oblique deposition and the rotatable anisotropy induced by the rotatable stripe domain.Furthermore,the regulating range of resonance frequency for the CoZr film can be adjusted by changing the oblique deposition angle.Our results might be beneficial for the applications of magnetic thin films in microwave devices.     

Thermo-stimulated luminescence of x-ray- and alpha-irradiated yttria-stabilized zirconia

Yttria-stabilized zirconia (ZrO2 : Y3+) single crystals (with 9.5 mol% Y2O3) were irradiated with x-rays and α particles. Thermally stimulated luminescence (TSL) data show a main broad peak centred at ～500-550 K in the glow curves of all irradiated samples. The TSL peak maximum temperature is consistent with the characteristic recovery temperature (～450 K) of colour centres (T centres) deduced from isochronal annealing curves measured by electron paramagnetic resonance (EPR) spectroscopy. However, the trap-depth energies (ranging between 0.8 and 1.2 eV) deduced from the initial rise of partially cleaned TSL peaks (and from a rough approximation using Urbach's formula) are much larger than the activation energies for defect recovery of 0.3 eV deduced from the EPR data. A second TSL peak centred at ～350-450 K found in freshly irradiated samples is seen to decay substantially in aged samples. The processes involved in TSL are discussed in relation to the defect annealing processes, and available defect-level energy and TSL data.     

Multifrequency electron paramagnetic resonance of ultramarine blue

Electron paramagnetic resonance spectra of the S^3/? radical center in ultramarine blue over a factor of about 2500 in frequency (258 MHz to 670 GHz) reveal a substantially Lorentzian shape, without resolution of g anisotropy. Variable temperature measurements found that the line width is independent of temperature, within experimental uncertainty, up to about 90 K at 9.5 GHz and between ca. 5 K and room temperature at 95 and 217 GHz, as expected for an exchange-narrowed signal. Analysis of the increase in the low-temperature line width as a function of frequency above 9 GHz is consistent with an exchange interaction of about 2· 10^?2 K. The line width increases as frequency is decreased from 2.7 GHz to 258 MHz which is attributed to the contribution from nonsecular terms that has been denoted the “10/3” effect.     

Influence of grain growth on the high-frequency behaviour of ferromagnetic Fe-Co-(M)-N (M=Ta, Hf) nanocomposite films

The CMOS compatible ferromagnetic Fe-Co-(M)-N (M=Ta, Hf) films were investigated with regard to their grain size-dependent frequency behaviour. Predominantly Fe₃₃Co₄₀Ta₁₀N₁₇ films were deposited by reactive r.f. magnetron sputtering. These films were compared to Fe₃₆Co₄₄Hf₉N₁₁ films. In order to induce an in-plane uniaxial anisotropy H_u as well as to investigate the grain growth behaviour, the films were annealed in a static magnetic field. The in-plane uniaxial anisotropy field of around 4 mT as well as a good soft magnetic behaviour with a saturation polarisation of approximately 1.2-1.4 T could be observed after heat treatment. Ferromagnetic resonance frequencies (FMR) of approximately up to 2.4 GHz could be achieved according to the Kittel theory. Depending on the heat treatment, high-frequency losses through energy dissipation was made conspicuous by means of the full-width at half-maximum (FWHM) Δf_eff of the imaginary part of the frequency-dependent permeability which was between 0.4 and 1 GHz. This FWHM was basically discussed in terms of two-magnon scattering theories, in combination with the Herzer random anisotropy model. In order to correlate the resonance line broadening with a phenomenological damping parameter α_eff, which ranged from about 0.0125 to 0.028, the modified Landau-Lifschitz-Gilbert equation was used to fit and describe the permeability spectra of the ferromagnetic films.     

Antiferromagnetic resonance and phase diagrams of gadolinium ferroborate GdFe<Subscript>3</Subscript>(BO<Subscript>3</Subscript>)<Subscript>4</Subscript>

Antiferromagnetic resonance in single crystals of rhombohedral gadolinium ferroborate GdFe₃(BO₃)₄ was studied. The frequency-field dependences of antiferromagnetic resonance over the frequency range 26–70 GHz and the temperature dependences of resonance parameters for magnetic fields oriented along the crystal axis and in the basal plane were determined. It was found that the iron subsystem, which can be treated as a two-sublattice antiferromagnet with anisotropy of the easy-plane type, experienced ordering at T=38 K. At temperatures below 20 K, the gadolinium subsystem with the opposite anisotropy sign strongly influenced the anisotropic properties of the crystal. This resulted in a spontaneous spin-reorientation transition from the easy-plane to the easy-axis state at 10 K. Below 10 K, magnetic field-induced transitions between the states were observed. Experimental phase diagrams on the temperature-magnetic field plane were constructed for fields oriented along the crystal axis and in the basal plane. A simple model was used to calculate the critical transition fields. The results were in close agreement with the experimental values measured at T=4.2 K for both field orientations.     

Two-frequency quasi-optical radiospectrometer for substance investigations

In this paper two-frequency radiospectrometer is described: frequency of ESR is n _e =(120 GHz – 150 GHz); frequency of the nuclear magnetic resonance (NMR) is n _n =(180 MHz – 200 MHz).Radiospectrometer is operates in the temperature band T=(4.2 K 1.7 K) and in the magnetic field band H=5 T.