十聚钨酸盐催化环己醇制备环己酮工艺研究

合成新型N-甲基吗啉十聚钨酸盐[Mor1,2]4W10O32,对其进行提纯、表征和催化性能研究。催化体系是以[Mor1,2]4W10O32为催化剂,30%H2O2为氧化剂,催化氧化环己醇制备环己酮。考察催化剂用量、氧化剂用量、反应温度变化和反应时间变化对环己酮产率的影响,确定最佳反应条件为:反应温度80℃、环己醇用量5mmol、催化剂用量30μmol、氧化剂H2O2用量12.5 mmol,反应时间6小时,此时环己酮产率可达到96%。     

环氧环戊烷的无溶剂合成工艺

以聚苯乙烯-二乙烯苯接枝磷钨酸季铵盐为三相相转移催化剂,以H2O2为氧化剂,KCl为助催化剂,研究了环戊烯(CPE)合成环氧环戊烷(CPEO)的无溶剂工艺。 讨论了催化剂和助催化剂用量、反应温度、反应时间、环戊烯与H2O2摩尔比对反应的影响。 确定了无溶剂环氧环戊烷合成反应的条件为(以0.056 mol H2O2计)：催化剂1.0 g、助催化剂0.025 g、反应温度40 ℃、反应时间5 h、n(CPE)∶n(H2O2)=2.1∶1.0。 CPEO的平均收率约为96%。 催化剂回收重复使用6次活性无明显降低。     

三缺位Keggin型磷钨杂多酸盐高选择性催化氧化环己烯

利用三缺位Keggin型杂多酸[A-α-PW9O34]9-和[(FeШ(OH2)2)3(A-α-PW9O34)2]9-的四丁基铵盐做为催化剂,H2O2做为氧化剂催化环己烯氧化反应. 考察了反应时间、H2O2与环己烯的摩尔比,催化剂的用量等因素对反应结果的影响. 结果表明：在1, 2-二氯乙烷为10 mL,H2O2 (30 %)与环己烯的摩尔比为2,反应温度为35 oC,反应时间为6 h,[(C4H9)4N]9[A-α-PW9O34]为催化剂的条件下,环己烯氧化反应的转化率为55 %,主要产物是环氧环己烷,其选择性 ≥ 99 %;而以[(C4H9)4N]9[(FeШ(OH2)2)3(A-α-PW9O34)2]为催化剂时环己烯氧化反应的转化率17 %,主要产物是2-环己烯-1-酮,选择性 ≥ 99 %.     

GoAggⅡ体系催化氧化环己烷为环己酮

研究了Gif体系成员之一GoAggⅡ体系催化氧化环己烷为环己酮的反应.考察了催化剂用量、氧化剂用量、溶剂配比、反应温度和反应时间等对产率的影响.最佳反应条件为:1 40 mmol,催化剂[NH4Fe(SO4)2]1mmol,氧化剂[30%H2O2]80 mmol,溶剂[y(吡啶):V(乙酸)=5.6:1.0]33 mL,于40℃反应16 h.在此条件下,收率达10.33%,n(环己酮):n(环己醇)=5.61.     

氨基酸功能化磷钨酸盐的制备及其催化氧化脱硫性能

以L-丙氨酸和磷钨酸为原料,合成氨基酸功能化磷钨杂多酸盐([Ala]3PW),并采用XRD、FT-IR对其结构进行表征。以[Ala]3PW为催化剂,过氧化氢作为氧化剂,甲基咪唑四氟硼酸盐([HMIM]BF4)为萃取剂氧化萃取一体法脱除模拟油中的二苯并噻吩(DBT)。考察了反应温度、催化剂加入量、O/S物质的量比、萃取剂加入量、硫化物类型等因素对脱硫效率的影响。结果表明,在模拟油为10mL、[Ala]3PW=0.04g、O和S的物质的量比为6、V([HMIM]BF4)/V(oil)=0.6、反应温度50℃、反应时间180min的条件下,DBT的转化率可达到98.2%。催化剂循环使用4次活性没有明显的降低。     

Keggin型磷钼钒季铵盐催化氧化苯制苯酚反应研究

采用分步反应、分步酸化法制备了磷钼钒缺位型杂多酸,用（C4H9）4N^＋（以下简写为Bu4N^＋）阳离子取代杂多酸中H^＋作为反荷离子合成了杂多季铵盐（用于苯氧化制苯酚反应）．FT-IR分析反应前后催化剂结构的变化．以苯为原料,乙酸为溶剂,30％H2O2作氧化剂,系统考察了催化剂类型、催化剂用量、氧化剂用量、反应时间及温度对反应的影响．实验结果表明,56．4mmol苯在（Bu4N）5PMo10V2O40用量0．25mmol,30％H2O2用量10mL,溶剂乙酸10mL,70℃条件下回流反应6h,苯酚收率可达到27．9％．     

氯固相合成Ti-ZSM-5催化苯乙烯环氧化对映选择性 的研究

用TiCl~4气固相同晶取代法制得的Ti-ZSM-5作催化剂。研究了以H~2O~2为氧化剂氧化苯乙烯生成环氧苯乙烷的对映选择性,发现生成的环氧苯乙烷主要以R构型为主。考察了反应时间,反应温度,催化剂Ti-ZSM-5以及氧化剂[w(H~2O~2)=30%]的用量等反应条件对苯乙烯环氧化反应对映性的影响。结果表明,反应温度是影响环氧化反应对映选择性的重要因素,降低反应温度有利于提高对映选择性(ee),当反应温度≤40℃时,ee值可达100%;而反应时间,催化剂及氧化剂[w(H~2O~2)=30%]用量对环氧化反应的对映选择性几乎没有影响。     

氯固相合成Ti-ZSM-5催化苯乙烯环氧化对映选择性 的研究

用TiCl~4气固相同晶取代法制得的Ti-ZSM-5作催化剂。研究了以H~2O~2为氧化剂氧化苯乙烯生成环氧苯乙烷的对映选择性,发现生成的环氧苯乙烷主要以R构型为主。考察了反应时间,反应温度,催化剂Ti-ZSM-5以及氧化剂[w(H~2O~2)=30%]的用量等反应条件对苯乙烯环氧化反应对映性的影响。结果表明,反应温度是影响环氧化反应对映选择性的重要因素,降低反应温度有利于提高对映选择性(ee),当反应温度≤40℃时,ee值可达100%;而反应时间,催化剂及氧化剂[w(H~2O~2)=30%]用量对环氧化反应的对映选择性几乎没有影响。     

金属取代Dawson型磷钼钨杂多化合物催化氧化苯甲醇合成苯甲醛反应研究

合成了金属元素Mg、Al取代的缺位型Dawson结构磷钼钨杂多化合物MP2W15Mo2(M=Mg,Al等),并以其为催化剂,用30%的过氧化氢为氧化剂,在水-苯甲醇的两相体系中进行了苯甲醇的催化氧化反应.通过正交实验对苯甲醇催化氧化条件进行了考察,结果表明,催化剂MgP2W15Mo2的催化效果最好,其最优反应条件为:温度100℃,催化剂用量为2.5μmol,反应时间10 h,30%双氧水用量1 mL(9.79 mmol).     

酸性离子液体降解纤维素制备5-羟甲基糠醛的研究

以离子液体氯化1-烯丙基-3-甲基咪唑鎓([Amim]Cl)为溶剂,以咪唑类酸功能离子液体[Cnmim]HSO4(n=2,4,6,8)和Cr Cl3·6H2O为复合催化剂,在微波辅助加热条件下降解纤维素制备5-羟甲基糠醛(5-HMF),考察了催化剂加入量、反应温度、催化剂种类、反应时间、加水量等反应条件对纤维素降解反应的影响。结果表明,当[C2mim]HSO4的加入量为0.02g、微晶纤维素(MCC)和Cr Cl3·6H2O的摩尔比为10∶1、反应温度为160℃、反应时间为30min、加水量为50μL时,微晶纤维素转化率为100%,总还原糖收率为87.2%,5-HMF产率最高可达到50%。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.