准全向平板超材料吸波体的设计

本文设计了一种具有准全向吸波特性的平板超材料吸波体,其准全向吸波特性是由超材料吸波单元的双面吸波、极化不敏感和宽入射角实现的.理论分析和仿真结果表明:该吸波体在6.18 GHz的确有一个双面吸波的吸收点,且吸收率对极化角和入射角均不敏感.提取的等效阻抗表明可以调节超材料的电磁响应使其在吸收频率处与自由空间阻抗匹配来抑制反射.仿真的能量损耗分布表明:该吸波体对电磁波的吸收主要源于基板的介质损耗;采用两种不同介质基板的设计可使前吸波体与后吸波体的耦合度明显降低、抑制耦合所导致的传输.该吸波体可能在许多领域具有 关键词： 准全向吸波 双面吸波 极化不敏感 宽入射角     

基于电阻膜的宽频带超材料吸波体的设计

基于电阻膜设计了一种宽频带、极化不敏感和宽入射角的超材料吸波体.该吸波体的结构单元由六边形环状电阻膜结构、介质基板和金属背板组成.仿真得到的反射率和吸收率表明,该吸波体在7.0-27.5 GHz之间对入射电磁波具有宽频带的强吸收,证实了电路谐振相对于电磁谐振易于实现宽带吸波.仿真得到的不同极化角和不同入射角下超材料吸波体的吸收率表明,该吸波体具有极化不敏感和宽入射角特性.仿真得到的基板和电阻膜对超材料吸波体吸收率的影响表明,电阻膜结构和金属背板之间形成的电容以及电阻膜结构的电阻都存在一个最佳值,此时电路谐 关键词： 电阻膜 电路谐振 宽频带 超材料吸波体     

基于电阻型频率选择表面的低频宽带超材料吸波体的设计

基于电阻型频率选择表面(Resistance Frequency Selective Surface, RFSS) 设计了一种低频宽带、 极化不敏感和宽入射角特性的超材料吸波体. 该吸波体的基本单元由开槽十字型平面超材料(Cave Cross Planar Metamaterial, CCPM)、 RFSS、 电介质基板和金属背板组成. 采用FDTD方法数值模拟得到的结果表明: 相比于单纯的CCPM吸波体、 RFSS吸波体, CCPM和RFSS复合结构吸波体低频吸收特性得到极大改善, 在整个1-5 GHz频率范围内, 吸收率大于80%, 吸收峰值达到98%以上. 数值模拟得到的不同极化角和不同入射角下的吸收率表明: 该复合结构吸波体具有极化不敏感和宽角度吸收特性.     

基于磁谐振器加载的宽频带超材料吸波体的设计

基于加载集总元件的磁谐振器设计了一种宽频带、极化不敏感和宽入射角的超材料吸波体.该吸波体的结构单元由加载集总元件的磁谐振器、介质基板和金属背板组成.仿真得到的加载集总元件和不加载集总元件情况下一维阵列结构吸波体的吸收率表明,相对于不加载集总元件的情况,加载集总元件的一维阵列结构吸波体能够实现宽频带吸波.仿真得到的集总电阻和集总电容取不同值时一维阵列结构吸波体的吸收率表明,集总电阻和集总电容都存在一个最佳值,此时吸波体的吸收率最高、吸收带宽最宽.仿真得到的基板有耗和无耗情况下一维阵列结构吸波体的吸收率表明, 关键词： 磁谐振器 集总元件 宽频带 超材料吸波体     

极化无关双向吸收超材料吸波体的仿真与实验验证

设计并制作出极化无关双向吸收超材料吸波体.仿真结果表明,该吸波体对斜入射横电极化和横磁极化电磁波具有较好的吸收效果,其强损耗主要来自介质基板的介电损耗.实验测试结果表明,该吸波体在11.1 GHz对垂直入射电磁波实现双向强吸收,吸收率分别为95.9％和90.8％.该吸波体厚度较薄,工作波长约为1/34.该超材料吸波体具有吸收率高、厚度薄、设计简单、易于加工等优点.     

基于电阻膜与分形频率选择表面的超薄宽频带超材料吸波体的设计

设计了一种基于一阶Minkowski分形双方环(Minkowski fractal double square loop, MFDSL)电谐振器结构与电阻膜复合的超薄、 宽频带、极化不敏感和宽入射角的超材料吸波体. 该吸波体的基本结构单元由MFDSL电谐振器结构、方块电阻膜、电介质基板和金属背板组成. 采用时域有限差分算法对这种复合结构吸波体的电磁波吸收特性进行数值模拟分析. 模拟得到的反射率和吸收率表明: 该吸波体在7.5-42 GHz之间对入射电磁波具有大于90%以上的强吸收特性. 模拟得到的不同极化角和不同入射角下的吸收率表明: 该吸波体具有极化不敏感和宽入射角特性. 进一步的数值模拟结果表明, 该复合结构吸波体对电磁波的吸收主要是基于电磁谐振和电路谐振机制, 通过方块电阻的设计可以实现工作频率范围的调节. 关键词： 电阻膜 分形频率选择表面 宽频带吸收     

基于宽边耦合螺旋结构的低频小型化极化不敏感超材料吸波体

设计、仿真并实验验证了基于宽边耦合螺旋结构的低频小型化超材料吸波体. 实验测试结果表明, 该超材料吸波体在1.39 GHz吸收率达到最大为98%, 其单元尺寸和总厚度均为6.8 mm, 约为1/32工作波长, 实现小型化窄带吸波. 由于吸波体中螺旋结构是旋转对称排列的, 因而其对垂直入射电磁波的极化方向是不敏感的. 此外, 该超材料吸波体对斜入射横电和横磁极化电磁波在60°时, 仍具有强吸收. 关键词： 超材料 吸波体 小型化     

基于电磁谐振的极化无关透射吸收超材料吸波体

仿真并实验验证了基于电磁谐振的极化无关透射吸收超材料吸波体, 该吸波体可以实现低频透射和高频吸收.实验测试结果表明, 该吸波体在6.77 GHz 吸收率峰值为83.6%, 半功率带宽为4.3%, 实现窄带强吸收.为进一步拓展该谐振型超材料吸波体的吸收带宽, 利用其低频透射特性, 将两个工作于不同频段的吸波体叠加在一起, 测试结果表明, 复合后超材料吸波体的半功率带宽可以增大到10.9%, 吸收率也略有增强. 该超材料吸波体设计简单, 具有较强的实用性和应用前景. 关键词： 极化无关 透射吸收 超材料吸波体     

基于电磁谐振分离的宽带低雷达截面超材料吸波体

基于超材料的电磁谐振特性, 设计、制作了一种极化无关的宽带低雷达散射截面 (radar cross section, RCS)超材料吸波体. 通过场分布和反演法分析了其吸波机理, 利用波导法和空间波法测试了其吸波率和RCS特性. 理论分析表明: 在平面波的作用下, 该吸波体对某一吸波频率在不同的位置分别提供电谐振和磁谐振, 对不同的吸波频率, 利用不同的介质层提供主要的能量损耗, 从而有效减弱了电磁耦合, 保证了宽频带的强吸收特性. 实验结果表明: 设计的三层结构吸波体吸波率达90%以上的带宽是单层结构的4.25倍, RCS减缩10 dB以上的带宽为5.1%, 其单元尺寸为0.17λ, 厚度仅为0.015λ. 该吸波体的低RCS特性还具有极化无关、宽入射角的特点, 且通过改变吸波体的夹层结构可以实现工作带宽的灵活调节. 关键词： 超材料吸波体 雷达散射截面 宽带 电磁谐振     

宽带透射吸收极化无关超材料吸波体

提出了一种新的基于磁性吸波体材料的具有低频透射和高频宽带吸收特性的超材料吸波体.该超材料吸波体在1 GHz的透射系数为-0.5 dB,具有较好的低频透射特性,可以实现对低频信号的相互通信;在频率大于8.4 GHz的频段,吸收率均大于80%,基本覆盖整个X波段和Ku波段,实现高频宽带吸收.此外,由于该超材料吸波体的单元金属周期结构具有较好的四重旋转对称性,因而是极化无关的.该透射吸收超材料吸波体设计简单,实用性强,具有较强的潜在应用价值.     

Broadband,polarization-insensitive,and wide-angle microwave absorber based on resistive film

A simple design of broadband metamaterial absorber(MA) based on resistive film is numerically presented in this paper.The unit cell of this absorber is composed of crossed rectangular rings-shaped resistive film,dielectric substrate,and continuous metal film.The simulated results indicate that the absorber obtains a 12.82-GHz-wide absorption from about 4.75 GHz to 17.57 GHz with absorptivity over 90% at normal incidence.Distribution of surface power loss density is illustrated to understand the intrinsic absorption mechanism of the structure.The proposed structure can work at wide polarization angles and wide angles of incidence for both transverse electric(TE) and transverse magnetic(TM) waves.Finally,the multi-reflection interference theory is involved to analyze and explain the broadband absorption mechanism at both normal and oblique incidence.Moreover,the polarization-insensitive feature is also investigated by using the interference model.It is seen that the simulated and calculated absorption rates agree fairly well with each other for the absorber.     

A wideband metamaterial absorber based on a magnetic resonator loaded with lumped resistors

<正>A wideband metamaterial absorber（MA） based on a magnetic resonator loaded with lumped resistors is presented. It is composed of a one-dimensional periodic array of double U-shaped structured magnetic resonators loaded with lumped resistors,a dielectric substrate,and a metal plate.We simulated,fabricated,measured,and analyzed the MA. The experimental results show that the reflectance(S₁₁) is below -10 dB at normal incidence in the frequency range of 7.7 GHz-18 GHz,and the peak value is about—20 dB.Simulated power loss density distributions indicate that wideband absorption of the MA is mainly attributable to the lumped resistors in the magnetic resonator.Further investigations indicate that the distance between two unit cells along the magnetic field direction significantly influences the performance of the MA.     

An ultrathin wide-band planar metamaterial absorber based on a fractal frequency selective surface and resistive film

We propose an ultrathin wide-band metamaterial absorber （MA） based on a Minkowski （MIK） fractal frequency selective surface and resistive film. This absorber consists of a periodic arrangement of dielectric substrates sandwiched with an MIK fractal loop structure electric resonator and a resistive film. The finite element method is used to simulate and analyze the absorption of the MA. Compared with the MA-backed copper film, the designed MA-backed resistive film exhibits an absorption of 90% at a frequency region of 2 GHz-20 GHz. The power loss density distribution of the MA is further illustrated to explain the mechanism of the proposed MA. Simulated absorptions at different incidence cases indicate that this absorber is polarization-insensitive and wide-angled. Finally, further simulated results indicate that the surface resistance of the resistive film and the dielectric constant of the substrate can affect the absorbing property of the MA. This absorber may be used in many military fields.     

Broadband metamaterial absorber on a single-layer ultrathin substrate

In this article, a broadband metamaterial microwave absorber on a low-cost FR-4 Epoxy substrate is proposed. The unit cell of the absorber consists of a staircase shape metallic patch placed on the top of the metal-backed ultrathin dielectric substrate having a thickness of 1.9 mm (0.07 λ₀). The absorption of more than 90% is achieved with this proposed low profile single-layer microwave absorber throughout the operation band from 8.86 to 15.5 GHz. The performance is analyzed for different values of incident angle, polarization angle, substrate height, and dielectric constant. The surface current and the power loss density at the top and bottom planes at the two absorption peaks of 9.46 and 13.90 GHz are also analyzed to elaborate the absorption mechanism of the structure. Experimental result closely follows the simulated one. The broadband characteristics of the design with relative absorption bandwidth (RAB) of 54.51% at both TE and TM polarizations of incident wave for a wide incident angles makes it versatile for applications in the X and Ku bands of microwave frequencies. The proposed work is very compact (unit cell size: 0.22 λ₀) with ultrathin substrate height (0.07 λ₀) and giving RAB performance of 54.51% comparable with that of others. Thus with this single-layer low-cost substrate material a broadband absorber is achieved.     

基于磁/电介质混合型基体的宽带超材料吸波体的设计与制备

本文设计了一种基于磁/电介质混合型基体的宽带超材料吸波体, 吸波体基本单元由电阻膜、磁/电介质混合型基体以及金属背板组成. 采用时域有限差分法对超材料吸波体吸波性能进行了仿真, 使用遗传算法优化了反射率小于-10 dB的带宽. 仿真结果表明, 当超材料吸波体厚度为2.5 mm时, 在7.8–18 GHz频率范围内的反射率小于-10 dB, 具有厚度薄、宽带、极化不敏感等优点. 通过等效电路模型对其工作机理进行了分析与讨论. 最后制备样品进行测试, 测试结果与仿真结果一致.     

A pure dielectric metamaterial absorber with broadband and thin thickness based on a cross-hole array structure

A pure dielectric metamaterial absorber with broadband and thin thickness is proposed, whose structure is designed as a periodic cross-hole array. The pure dielectric metamaterial absorber with high permittivity is prepared by ceramic reinforced polymer composites. Compared with those with low permittivity, the absorber with high permittivity is more sensitive to structural parameters, which means that it is easier to optimize the equivalent electromagnetic parameters and achieve wide impedance matching by altering the size or shape of the unit cell. The optimized metamaterial absorber exhibits reflection loss below -10 dB in 7.93 GHz-35.76 GHz with a thickness of 3.5 mm, which shows favorable absorption properties under the oblique incidence of TE polarization (±45°). Whether it is a measured or simulated value, the strongest absorbing peak reaches below -45 dB, which exceeds that of most metamaterial absorbers. The distributions of power loss density and electric and magnetic fields are investigated to study the origin of their strong absorbing properties. Multiple resonance mechanisms are proposed to explain the phenomenon, including polarization relaxation of the dielectric and edge effects of the cross-hole array. This work overcomes the shortcomings of the narrow absorbing bandwidth of dielectrics. It demonstrates that the pure dielectric metamaterial absorber with high permittivity has great potential in the field of microwave absorption.