聚N,N-双水杨醛乙二胺合钴修饰超微电极的制备及其在一氧化氮测定中应用的研究

通过电化学聚合法制备了聚Ｎ，Ｎ－双水杨醛乙二胺合钴［ｐｏｌｙＣｏ（Ｓａｌｅｎ）］修饰超微电极，研究了该修饰电极的电催化性质及其在一氧化氮（ＮＯ）测定中的应用．实验结果表明，ｐｏｌｙＣｏ（Ｓａｌｅｎ）修饰超微电极对ＮＯ的测定有高的灵敏度，ＮＯ的浓度在２．０×１０－８～２．８×１０－６ｍｏｌ／Ｌ范围内，电流与浓度呈良好的线性关系，线性相关系数为０．９９９８，检出限为１．０×１０－８ｍｏｌ／Ｌ；该电极进一步修饰Ｎａｆｉｏｎ后，生物体中常见的物质如抗坏血酸、儿茶酚胺类神经递质的代谢物、ＮＯ的氧化产物ＮＯ－２等不干扰测定．本传感器可以满足ＮＯ在体分析的需要．     

半微分阴极溶出伏安法研究硫离子在银电极上的电化学行为

用半微分阴极溶出伏安法研究硫离子在银电极上的电化学行为。在ＮａＯＨ－ＥＤＴＡ－Ｎａ２ＳＯ３底液中，可消除溶解氧及部分重金属离子Ｃｕ２＋，Ｐｂ２＋，Ｚｎ２＋，Ｃｄ２＋和Ｎｉ２＋的干扰。一些阴离子Ｃｌ－，Ｉ－，ＮＯ－３和ＳＯ２－４不干扰。硫离子浓度在３．１９×１０－６ｍｏｌ／Ｌ至３．１３×１０－５ｍｏｌ／Ｌ范围内与溶出峰高成线性关系。对两种人发样品中硫含量测定的回收率分别为９３．９％和９７．８％。     

聚N,N-双水杨醛乙二胺合铁一氧化氮超微传感器的研究

报道了电化学聚合Ｎ，Ｎ－双水杨酸乙二胺合铁［ｐ－Ｆｅ（ｓａｌｅｎ）］一氧化氮（ＮＯ）超微传 感器的制备、ＮＯ的响应及机理研究．实验发现，用电化学聚合的方法制备的 ｐ－Ｆｅ（ｓａｌｅｎ）超微传感器对 ＮＯ的检测有高的灵敏度和好的选择性． ＮＯ的浓度在 ７． ２× １０－８～４． ４× １０－６ ｍｏｌ／Ｌ范围内，氧化电流与浓度呈线性关系；线性相关系数为０．９９９６，检测限达３．６×１０－８ ｍｏｌ／Ｌ；生物体中常见的物质如抗坏血酸、尿酸、儿茶酚胺类代谢产物、ＮＯ的氧化产物ＮＯ－２ 等不干扰测定．所研制的传感器可用于ＮＯ的在体分析．     

基于偶联反应新极谱法测定痕量亚硝酸根的研究：II.以苯酚为偶联试剂

本研究了苯酚在氨性缓冲溶液中与ＮＯ２＾－－磺胺重氮盐偶联反应的实验条件，建立了一个灵敏快速测定痕量ＮＯ２＾－的新方法。ＮＯ２＾－离子浓度在１．０×１０＾－１０－－４．８×１０＾－７ｇ／ｍｌ范围内，与峰高呈良好的线性关系。４０００倍量ＮＯ３＾－存在不干扰。     

（Cu（C14H11O3）（C10H8N2）2NO3.C2H5OH的合成,晶体结构和红外光谱

合成了（Ｃｕ（Ｃ１４Ｈ１１ｏ３）（Ｃ１０Ｈ８Ｎ２）ＮＯ３．Ｃ２Ｈ５ＯＨ化合物并测定其晶体结构，晶体属Ｐ空间群，ａ＝１．１９１１（２）ｎｍ，ｂ＝１．５３２２（２）ｎｍ，ｃ＝１．０４９２（２）ｎｍ，ａ＝１０８．９８（１）°β＝１０７．０４（１）°，γ＝７０．２５（１）°Ｚ＝２．在（Ｃｕ（Ｃ１４Ｈ１１Ｏ３）（Ｃ１０Ｈ８Ｎ２）２）配合阳离子中，２个２．２’－联吡啶的４个氮原子和二苯羟乙酸的１个羟基氧原子位     

CO(υ)高振动激发态向C2H2的振动传能研究

用时间分辨富里叶红外发射谱研究了高振动激发态ＣＯ向Ｃ２Ｈ２的传能，得到了ＣＯ（ｖ＝１－３）各振动态布居及其随时间的变化。利用微分法解出弛豫微分方程组，获得ＣＯ（ｖ＝１－３）向Ｃ２Ｈ２的传能速率常数分别为：２．０±０．１，６．０±０．２和９．４±０．８（１０＾－１３ｃｍ＾３·ｍｏｌｅｃｕｌｅ＾－１·ｓ＾－１）。传能速率随着振动量子数的增加而迅速增加。ＣＯ的振动能应向Ｃ２Ｈ２的对称伸缩模ｖ２近共振Ｖ－     

单茂钛催化剂的丙烯无规聚合反应及其动力学研究

比较了不同钛化合物／甲基铝氧烷（ＭＡＯ）催化体系的丙烯无规聚合，催化活性次序为ＣｐＴｉ（ＯＲ）３＞ＣｐＴｉ（ＯＰｈ）３＞ＣｐＴｉＣｌ３＞Ｃｐ２ＴｉＣｌ２＞Ｔｉ（ＯＢｕ）４＞ＴｉＣｌ４＞Ｔｉ（ＯＢｕ）２Ｃｌ２，所得聚丙烯用沸庚烷抽提８ｈ，溶解９５％以上，可溶部分经１３Ｃ ＮＭＲ、ＷＡＤＸ、ＦＴＩＲ等分析证明为无规聚丙烯（ａＰＰ），是没有结晶性的弹性体．ＧＰＣ测出其分子量Ｍｗ＝８．０～１０．０×１０４，Ｍｗ／Ｍｎ≈２．０．探索了催化体系ＣｐＴｉ（Ｏ ｎ Ｐｒ）３／ＭＡＯ中钛的浓度、［Ａｌ］／［Ｔｉ］摩尔比，丙烯聚合压力，聚合温度和时间对丙烯聚合反应的影响．研究了该催化体系丙烯聚合反应动力学规律，表观聚合反应速率对催化剂浓度和单体压力（浓度）都呈一级反应关系，表观聚合速率常数ＫＰ＝２９２×１０５ｍｏｌ／Ｌ·ｈ（４０℃）．活化能ΔＥ＝－７．８８×１０３Ｊ·ｍｏｌ－１，碰撞因子Ａ＝１．４１×１０－４ｍｏｌ／Ｌ·ｈ．     

二烯丙基二甲基氯化铵—丙烯酰胺反相乳液聚合的动力学特征研究

采用油酸失水山梨醇酯（ＳＰＡＮ）－壬基酚聚氧化乙烯醚（ＯＰ）复合乳化剂与Ｋ２Ｓ２Ｏ８－Ｎａ２ＳＯ３氧化还原引发剂，进行二烯丙基二甲基氯化铵－丙烯酰胺反相乳液共聚合，测得单体的竞聚率为γＤＡＤＭＡＣ＝０．１４±０．１１，γＡＭ＝５．０５±０．６６；在单体浓度为２５─４５％，引发剂浓度０．０６—０．１％，乳化剂浓度为５—９％，聚合温度３０３Ｋ条件下，得到了共聚反应动力学方程：Ｒｐ＝ｋ［Ｍ］０．６８［Ｉ］１．３１［Ｅ］０．７３，文中对上述结果做了解释．     

[Nd（ONO2）6][Cu（Im）（Phen）2]2（OH）.4H2O的合成,晶体结构…

用Ｎｄ（ＮＯ３）３．６Ｈ２Ｏ、Ｉｍ（Ｃ３Ｈ４Ｎ２）、Ｐｈｅｎ（Ｃ１２Ｈ８Ｎ２）和Ｃｕ（ＮＯ３）２．３Ｈ２Ｏ为原料，两步反应合成了标题化合物，该化合物晶体属Ｐ１空间群，晶胞参数ａ＝１．０１２６（２）ｎｍ，ｂ＝１．１７９２（２）ｎｍ，ｃ＝１．３９８５ｎｍ，ａ＝１１１．３２（３）°，β＝９３．１７（３）°，γ＝９０．３３（３）°，Ｚ＝１，Ｒ＝０．０４３，测定了化合物的ＵＶ－Ｖｉｓ－ＮＩＲ及ＩＲ光谱和变温     

［Cu_2（Gly－GlyO）_2（4，4＇－bpy）（OH）_2］·9H_2O

将Ｇｌｙ－ＧｌｙＯ、４，４＇－联吡啶与Ｃｕ（ＮＯ_３）_２·Ｈ_２Ｏ在二次水溶液中反应，合成出以４，４＇－ｂｐｙ为中继基、Ｃｌｙ－ＧｌｙＯ为螯环的新型双核铜配合物，经Ｘ射线单晶结构分析确定该配合物晶体的化学结构式为［（Ｈ_２ＮＣＨ_２ＣＯＮＨＣＨ_２ＣＯＯ）Ｃｕ（ＯＨ）（Ｃ_（１０）Ｈ_８Ｎ_２）Ｃｕ（ＯＮ）（Ｈ_２ＮＣＨ_２ＣＯＮＨＣＨ_２ＣＯＯ）］·９Ｈ_２Ｏ．晶体属Ｐ　空间群，晶胞参数ａ＝１．１４１２ｎｍ，ｂ＝１．２２９８ｎｍ，ｃ＝１．４２６９ｎｍ，α＝１１３．８２°，β＝１０１．９１°，γ＝１０３．６４°，Ｚ＝２．最终一致性因子Ｒ值为０．０６８，Ｒ_ｗ值为０．０５７，标准偏差σ＝０．１９５１。     

Comparison of portable devices for sub-ambient concentration measurements of methane (CH4) and nitrous oxide (N2O) in soil research

ABSTRACT

Production and consumption of methane (CH₄) and nitrous oxide (N₂O) in soils have a strong influence on global greenhouse gases (GHG) budgets. Therefore, it is crucial to precisely measure GHG fluxes at the soil–atmosphere interface. In upland soils, CH₄ and N₂O can be consumed by microbiological processes, and the respective concentrations can be lower than in the atmosphere, demanding highly sensitive gas analysing systems. Traditionally, soil air is sampled in vials and analysed in the laboratory by gas chromatography (GC). During the last decade, different technologies have been developed that allowed to build portable gas analysers that are able to measure sub-ambient gas concentration directly in the field. Here, we compared sub-ambient to ambient CH₄ and N₂O concentration values from four portable devices using different measurement technologies (a portable GHG analyser based on laser absorption spectroscopy [LAS], two portable Fourier transform infrared spectroscopy [FTIR] devices and a field gas analyser using photoacoustic spectroscopy [PAS]) to traditional GC analysis in the laboratory (a GC system equipped with a flame ionisation detector [GC-FID] and an electron capture detector [GC-ECD]). The accuracy and precision of photoacoustic spectroscopy measurements are strongly influenced by the water vapour content and non-target gases in the sampling air. We used an advanced set-up for a widely used PAS analyser enabling N₂O measurements at sub-ambient concentrations with similar precision and accuracy as the GC-ECD system. Measurements of CH₄ and N₂O by FTIR and LAS devices were in good agreement with the GC systems. We conclude that the portable devices are suitable for studies of GHG fluxes in the field. Thanks to their universal and portable character, LAS, PAS and FTIR devices represent useful alternatives to currently used technologies for field studies.     

Separation of metal complexes by on-line coupled LC-GC

The on-line coupled LC-GC technique was applied to the analysis of several metal chelates of N,N-diethyldithiocarbamic acid. A 10-port valve interface was used to couple the LC and GC instruments. Conditions during sample transfer into the GC gave fully concurrent solvent evaporation. The chelates investigated were separated with a short apolar fused silica column. LC preseparation was made with cyano or amino phases using a hexane/dichloromethane mixture as eluent. On-line LC-GC combination seems to be very suitable for the separation of the metal chelates studied.     

α-乙酰氧基-N-亚硝基吡咯烷的解离及其致癌代谢机理的理论研究

用ab initio方法, 在MP2/6-31G**水平下讨论了α-乙酰氧基-亚硝基吡咯烷(α-Acetoxy-NPYR)在各种条件下的解离反应机理, 并对形成终致癌物B, C, D的代谢机理进行研究. 发现在OH^－和H₂O作用下的解离都遵循羟基进攻羰基机理, OH^－作用下是一个经四面体中间体阴离子的无位垒过程, H₂O作用下有相对高的活化能(165.36 kJ/mol). H₃O^＋作用下是先形成阳离子产物的S_N1过程, 并没有发现遵循两种综合的解离情形. 同时, 羟基化产物异构化为终致癌物B, C, D是一个相对容易进行的过程.     

含磷钼酸及2,2’-联吡啶-3,3’-二羧酸配体的铜配位聚合物的合成、晶体结构与电化学性质

在水热条件下合成了一个新的化合物{[Cu4(PMo12O40)(H2O)5(H2bpdc)(Hbpdc)(bpdc)2].6H2O}n(H2bpdc=2,2′-联吡啶-3,3′-二羧酸),并用元素分析、IR、TG和X-射线衍射等手段进行了表征。结果表明本化合物的晶体结构中,最小不对称单元包含1个[Cu4(H2O)5(H2bpdc)(Hbpdc)(bpdc)2]3+阳离子,1个[PMo12O40]3-阴离子和6个结晶水分子。Cu(Ⅱ)与相邻[PMo12O40]3-的桥氧原子配位,形成一维链状结构。电化学研究表明,化合物存在三步氧化还原过程。     

DCC/AlCl_3体系引发异丁烯正离子聚合

研究以对-二枯基氯(DCC)/AlCl3体系引发异丁烯在CH2Cl2/Hex(40/60,V/V)混合溶剂中进行正离子聚合,探讨了DCC用量、给电子试剂,如三苯胺(TPA)、2,6-二甲基吡啶(DMPy)对异丁烯正离子聚合转化率、产物分子量及其分布的影响.结果表明,在无给电子试剂存在时,DCC和体系中微量水均可与AlCl3产生络合竞争引起相继的引发竞争,聚合产物GPC谱图呈双峰分布,分子量分布宽,需要大量的引发剂DCC(DCC/H2O=5.3)来减少体系中微量水的不可控引发;在少量上述给电子试剂存在下,可提高DCC的引发效率,减少向单体链转移反应,提高聚合产物的分子量和使分子量分布呈较窄的单峰分布,即使在较低DCC用量下也可基本抑制体系中微量水的不可控引发,达到DCC定量引发,并得到分子量分布相对较窄(Mw/Mn≈2.3)的聚异丁烯产物.     

Cationic ring-opening polymerization of tetrahydrofuran with Keggin-type heteropolycompounds as solid acid catalysts

<正>Three Keggin-type heteropolyanions,namely H_3PMo_(12)O_(40)·13H_2O,(NH_4)_3PMo_(12)O_(40)·4H_2O and H_3PW_(12)O_(40)·13H_2O were prepared and tested in the ring-opening polymerization reaction of tetrahydrofuran.The effects of the counter-cation (H~+,NH_4~+) and the peripheral atoms(Mo,W) on the polymerization were investigated.It has been found that when the protons of H_3PMo_(12)O_(40)·13H_2O were replaced by the ammonium cations the polymerization rate decreased dramatically. Whereas,when the peripheral atoms(Mo) were replaced by their homologous(W),the polymerization rate increased twofold.As for the viscosity average molecular weight(M_v) of polymer products,it was found that the high molecular weight(7930) was obtained by using H_3PW_(12)O_(40)·13H_2O.The molecular weight(M_v) obtained by H_3PMo_(12)O_(40)·13H_2O and (NH_4)_3PMo_(12)O_(40)·4H_2O was 6470 and 6810,respectively.     

Rotating Gliding Arc Assisted Water Splitting in Atmospheric Nitrogen

In this study, hydrogen production from water splitting in N₂ using an atmospheric pressure rotating gliding arc plasma was investigated. The effect of input H₂O concentration and total flow rate on the performance of the plasma water splitting process (e.g., H₂ and O₂ yield, H₂ production rate, and energy yield of H₂) was investigated. N₂ showed a pronouncedly facilitating effect on the H₂O splitting and H₂ production process due to the reactions of the excited N₂ species [e.g., electronically excited metastable N₂(A)] with the H₂O molecules. The maximum H₂ production rate reached up to 41.3 μmols^?1, which is much higher than that of other typical non-thermal plasmas (e.g., ~0.2 μmols^?1 for a dielectric barrier discharge). Optical emission diagnostics has shown that in addition to the NO, N₂, and N₂ ⁺ that were observed in the pure N₂ spectra, strong OH and NH emission lines also appeared in the H₂O/N₂ spectra. OH radical is considered as a key intermediate species that could contribute to the formation of H₂, O₂, and H₂O₂. The increase of the H₂O concentration could lead to a continuous enhancement of the OH intensity. The rotational temperature of N₂ ⁺ dropped drastically from 2875 ± 125 to 1725 ± 25 K with the addition of 1 % (mol/mol) H₂O into the N₂ plasma.     

大比表面积钛黑颜料的制备和表征

本文首次通过pH值控制沉淀法制备前驱物丁二酸钛肼复盐,并进一步热分解制备大比表面积钛黑颜料-黑色钛氧化物。通过比表面积(BET)、电子能谱(EDS)、X射线光电子能谱分析(XPS)、X射线粉末衍射(XRD)、场发射扫描电子显微镜(HRSEM)、物理吸附仪、激光粒度仪和Color i5型台式分光测色仪对黑色钛氧化物进行了表征,确定了黑色钛氧化物的组成为2TiO2·Ti2O3,其表面积为53.854 4 m2·g-1。并考察了酸源、水合肼用量、酸钛比、反应时间、pH、NaOH浓度和煅烧温度等各种反应参数对黑色钛氧化物的颗粒尺寸、分布均匀性和黑色度的影响。用元素分析仪和等离子体光谱仪测定了前驱物组成,确定其组成为[Ti(C4H4O4)2]0.85·2Ti2O3·6N2H4·3H2O,并探讨了黑色钛氧化物形成机理,为新型混合价材料黑色钛氧化物的制备提供重要参考依据。     

Sorption of CO2, C2H4, N2O and their binary mixtures in poly(methyl methacrylate)

Sorption of carbon dioxide, ethylene, and nitrous oxide in poly(methyl methacrylate) (PMMA) at 35°C has been characterized for each gas as a pure component and for mixtures of carbon dioxide/ethylene and carbon dioxide/nitrous oxide. Pressures up to 20 atm were examined. Pure-component sorption isotherms are concave to the pressure axis for each of the gases. This behavior is accurately described by the dual-mode sorption model. Using only the purecomponent dual-mode parameters and the generalization of the model for gas mixtures, one can predict the total concentration of gas sorbed in the polymer to within an average deviation of ±2.01% for the CO₂/C₂H₄/PMMA system and ±0.98% for the CO₂/N₂O/PMMA system. In both systems, for each component of the mixture, sorption levels were lower than corresponding pure-component sorption levels at pressures equal to the partial pressure of the respective components in the mixture. Depression of the sorbed concentration in mixture situations appears to be a general feature of the above systems and can be substantial in some situations. For the CO₂/C₂H₄/PMMA system, use of pure-component sorption data to estimate the total sorbed concentration in the mixture would be in error by as much as 40% if one failed to account for competition phenomena responsible for depression in mixed-gas situations. Mixture pressures as high as 20 atm were studied for both systems and in the CO₂/N₂O/PMMA system sorbed concentrations reach 33.90 [cm³(STP)/cm³ polymer] without any significant deviation from model predictions.