Functionalized silica nanoparticles for trapping Pb2+ ions via diazo‐azomethine scaffolds

Diazo‐azomethine coated silica sorbent for the adsorption of Pb²⁺ ions has been fabricated. The sorbent was obtained by one‐pot synthesis of silica nanoparticles in the presence of diazo‐azomethine molecules possessing silatranyl side chains for grafting via covalent bond formation. The functionalized silica nanoparticles exhibited characteristic physicochemical properties of diazo‐azomethine scaffolds as determined using Fourier transform infrared spectroscopy, scanning and transmission electron microscopies and thermogravimetric analysis. Various adsorption parameters such as pH, weight of adsorbent, time taken for equilibration and recovery of lead ions were optimized using a batch method. The sorbent showed high adsorption capacity for lead ions of 460.4 mg g^?1 at pH = 4. The effect of various competing ions on the adsorption of lead ions was studied and interference was removed by using a masking agent. The sorbent can be regenerated and reused, and is compatible for the adsorption of Pb²⁺ ions from green leafy vegetables. Copyright © 2016 John Wiley & Sons, Ltd.     

Effective removal of 2,4,6‐trinitrophenol over hexagonal metal–organic framework NH2‐MIL‐88B(Fe)

A nanostructured organic–inorganic framework, hexagonal NH₂‐MIL‐88B, has been prepared through a facile one‐pot reflux reaction and then it was characterized using various techniques. The as‐prepared sample with high specific surface area (414 m² g^?1) showed excellent adsorption for 2,4,6‐trinitrophenol (TNP) in the liquid phase. Detailed studies of the adsorption kinetics, adsorption mechanism, adsorption isotherm, activation energy and various thermodynamic parameters were conducted. The adsorption mechanism of NH₂‐MIL‐88B for TNP may be ascribed to hydrogen bond interaction, and the complexation between ─OH in TNP and unsaturated Fe(III) on the surface of NH₂‐MIL‐88B. The maximum adsorption capacity of NH₂‐MIL‐88B for TNP based on the Langmuir isotherm was 163.66 mg g^?1. The as‐prepared NH₂‐MIL‐88B adsorbent seems to be a promising material in practice for TNP removal from aqueous solution.     

Synthesis and characterization of antibacterial chromium iron oxide nanoparticle‐loaded activated carbon for ultrasound‐assisted wastewater treatment

The aim of this study was to evaluate the surface adsorption capacity of CrFeO₃ nanoparticle‐loaded activated carbon (CrFeO₃‐NPs–AC) for the removal of a cationic dye (methyl violet, MV). CrFeO₃‐NPs were hydrothermally synthesized and loaded on AC followed by characterization using X‐ray diffraction, field‐emission scanning electron microscopy and energy‐dispersive and Fourier transform infrared spectroscopies. The CrFeO₃‐NPs were tested for in vitro antibacterial activities against Gram‐positive (Staphylococcus aureus) and Gram‐negative (Pseudomonas aeruginosa) bacteria. Minimum inhibitory and minimum bactericidal concentrations of CrFeO₃‐NPs–AC were obtained to be 50 and 100 μg ml^?1, respectively, against S. aureus and 25 and 50 μg ml^?1 against P. aeruginosa. These results indicated the antibacterial properties of CrFeO₃‐NPs–AC. To investigate the adsorption process, several systematic experiments were designed by varying parameters such as adsorbent mass, pH, initial MV concentration and sonication time. The adsorption process was modelled and the optimal conditions were determined to be 0.013 g, 7.4, 15 mg l^?1 and 8 min for adsorbent mass, pH, MV concentration and sonication time, respectively. The real experimental data were found to be efficiently explained by response surface methodology and genetic algorithm model. Kinetic studies for MV adsorption showed rapid sorption dynamics described by a second‐order kinetic model, suggesting a chemisorption mechanism. Then, the experimental equilibrium data obtained at various concentrations of MV and adsorbent masses were fitted to conventional Langmuir, Freundlich, Temkin and Dubinin–Radushkevich isotherm models. Dye adsorption equilibrium data were fitted well to the Langmuir isotherm. From the Langmuir model, the maximum monolayer capacity was calculated to be 65.67 mg g^?1 at optimum adsorbent mass.     

Octa[4‐(9‐carbazolyl)phenyl]silsesquioxane‐Based Porous Material for Dyes Adsorption and Sensing of Nitroaromatic Compounds

A new fluorescent hybrid porous polymer (HPP) is synthesized by an anhydrous FeCl₃‐mediated oxidative coupling reaction of octa[4‐(9‐carbazolyl)phenyl]silsesquioxane (OCPS). The polymer possesses a surface area of 1741 m² g^?1 and hierarchical bimodal micropores (1.41 and 1.69 nm) and mesopores (2.65 nm). The material serves as an excellent adsorbent for CO₂ and dyes with high adsorption capacity for CO₂ (8.53 wt %,1.94 mmol g^?1), congo red (1715 mg g^?1) and rhodamine B (1501 mg g^?1). In addition, the presence of peripheral cabozolyl groups with extended π‐conjugation in the crosslinked framework imparts luminescent character to the polymer and offers the detection of nitroaromatic compounds.     

Polyphenylene sulfide‐based adsorption resins: synthesis,characterization and adsorption performance for Hg(II) and As(V)

A series of novel adsorption resins were synthesized via the chloromethylation of polyphenylene sulfide (PPS) resin and subsequent functional group conversion reaction. Their chemical structure, thermal stability, and morphology were systematically characterized by the Fourier transform infrared spectroscopy, elemental analysis, Raman spectroscopy, thermogravimetric analysis, scanning electron microscope, and energy dispersive spectrometer, respectively. The experimental results showed that the thioureido, mercapto, aminopyridine, and quaternary ammonium groups had been respectively introduced into PPS matrix, the functional group content of PPS‐based mercapto resin (HS‐PPS), aminopyridine resin (AP‐PPS), and quaternary ammonium resin (QA‐PPS) were about 2.20, 1.71, and 2.61 mmol g^?1, respectively. The adsorptive performance for Hg (II) and As (V) were studied by batch adsorptive method; the adsorption capacities of the HS‐PPS and AP‐PPS resin for Hg (II) were 210.65 and 169.06 mg g^?1. The adsorption capacity of the QA‐PPS resin was 88 mg g^?1 for As (V). Copyright © 2017 John Wiley & Sons, Ltd.     

Comparative study of acid yellow 119 adsorption onto activated carbon prepared from lemon wood and ZnO nanoparticles loaded on activated carbon

Activated carbon from lemon wood (AC) and ZnO nanoparticles loaded on activated carbon (ZnO‐NP‐AC) were prepared and their efficiency for effective acid yellow 199 (AY 199) removal under various operational conditions was investigated. The dependence of removal efficiency on variables such as AY 199 concentration, amount of adsorbent and contact time was optimized using response surface methodology and Design‐Expert. ZnO nanoparticles and ZnO‐NP‐AC were studied using various techniques such as scanning electron microscopy, X‐ray diffraction and energy‐dispersive X‐ray analysis. The optimum pH was studied using one‐at‐a‐time method to achieve maximum dye removal percentage. Small amounts of the proposed adsorbents (0.025 and 0.025 g) were sufficient for successful removal of AY 199 in short times (4.0 and 4.0 min) with high adsorption capacity (85.51 and 116.29 mg g^?1 for AC and ZnO‐NPs‐AC, respectively). Fitting the empirical equilibrium data to several conventional isotherm models at optimum conditions indicated the appropriateness of the Langmuir model with high correlation coefficient (0.999 and 0.978 for AC and ZnO‐NPs‐AC, respectively) for representation and explanation of experimental data. Kinetics evaluation of experiments at various time intervals revealed that adsorption processes can be well predicted and fitted by pseudo‐second‐order and Elovich models. This study revealed that the combination of ZnO nanoparticles and AC following simple loading led to significant improvement in the removal process in short adsorption time which was enhanced by mixing the media via sonication.     

Anchoring H3PW12O40 on aminopropylsilanized spinel‐type cobalt oxide (Co3O4‐SiPrNH2/H3PW12O40): A novel nanohybrid adsorbent for removing cationic organic dye pollutants from aqueous solutions

In this work, phosphotungstic acid (H₃PW₁₂O₄₀; PW₁₂) was chemically anchored on aminopropylsiloxane functionalized spherical Co₃O₄ nanoparticles (Co₃O₄–SiPrNH₂) and the resultant nanocomposite (Co₃O₄–SiPrNH₂/PW₁₂) was fully characterized. The results demonstrated successful anchoring of PW₁₂ on the surface of Co₃O₄–SiPrNH₂nanoparticles. The Co₃O₄–SiPrNH₂/PW₁₂ nanohybrid indicated a specific surface area of 42.14 m² g^?1, which was greater than that of pure PW₁₂ (ca. 5 m² g^?1). The adsorption efficiency of this novel adsorbent nanomaterial was evaluated for removing methylene blue (MB), rhodamine B (RhB) and methyl orange (MO) dyes from aqueous solutions. The hybrid nanomaterial exhibited a high adsorption rate and selective adsorptivity for the cationic MB and RhB dyes compared to those for anionic MO dye. The prepared hybrid nanomaterial removed over 98% of MB within 12 min. The effects of initial pH, contact time, adsorbent dosage, and temperature were investigated on the adsorption process. The adsorption capacity of nanohybrid for cationic MB dye was 38.46 mg g^‐1. Also, adsorption kinetics indicated that the adsorption by Co₃O₄–SiPrNH₂/PW₁₂ was well‐modeled using pseudo‐second‐order kinetic model. Finally, thermodynamic parameters revealed that the adsorption was endothermic and spontaneous. The adsorption rate and ability of the Co₃O₄–SiPrNH₂/PW₁₂ were enhanced as compared with Co₃O₄ and Co₃O₄–SiPrNH₂ samples due to enhanced electrostatic attraction intraction. The nanohybride was easily separated and reused without any change in structure. Thus, it could be a promising green adsorbent for removing organic pollutants in water.     

Optimizing adsorptive removal of malachite green and methyl orange dyes from simulated wastewater by Mn‐doped CuO‐Nanoparticles loaded on activated carbon using CCD‐RSM: Mechanism,regeneration, isotherm,kinetic, and thermodynamic studies

In the present work, Mn‐doped CuO‐NPs‐AC was prepared by a simple method, characterized using various techniques such as FESEM, EDX, XRD, PSD, and pH_pzc and finally used for the adsorption of malachite green (MG) and methyl orange (MO) in a number of single and binary solutions. A series of adsorption experiments were conducted to investigate and optimize the influence of various factors (such as different pH, concentration of MG and MO, adsorbent mass, and sonication time) on the simultaneous adsorption of MG and MO using response surface methodology. Under optimal conditions of pH 10, adsorbent dose of 0.02 g, MG concentration of 30 mg L^?1, MO concentration of 30 mg L^?1, and sonication time of 4.5 min at room temperature, the maximum predicted adsorption was observed to be 100.0%, for both MG and MO, showing that there is a favorable harmony between the experimental data and model predictions. The adsorption isotherm of MO and MG by Mn‐doped CuO‐NPs‐AC could be well clarified by the Langmuir model with maximum adsorption capacity of 320.69 mg g^?1 and 290.11 mg g^?1 in the single solution and 233.02 mg g^?1 and 205.53 mg g^?1 in the binary solution by 0.005 g of adsorbent mass for MG and MO, respectively. Kinetic studies also revealed that both MG and MO adsorption were better defined by the pseudo‐second order model for both solutions. In addition, the thermodynamic constant studies disclosed that the adsorption of MG and MO was likely to be influenced by a physisorption mechanism. Eventually, the reusability of the Mn‐doped CuO‐NPs‐AC after six times showed a reduction in the adsorption percentage of MG and MO.     

Simultaneous removal of Cu2+ and Cr3+ ions from aqueous solution based on Complexation with Eriochrome cyanine‐R and derivative spectrophotometric method

TiO₂ nanoparticles deposited on activated carbon (TiO₂–NP–AC) was prepared and characterized by XRD and SEM analysis. Subsequently, simultaneous ultrasound‐assisted adsorption of Cu²⁺ and Cr³⁺ ions onto TiO₂‐NPs‐AC after complexation via eriochrome cyanine R (ECR) has been investigated with UV–Vis and FAA spectrophotometer. Spectra overlapping of the ECR‐Cu and ECR‐Cr complex was resolve by derivative spectrophotometric technique. The effects of various parameters such as initial Cu²⁺ (A) and Cr³⁺ (B) ions concentrations, TiO₂‐NPs‐AC mass (C), sonication time (D) and pH (E) on the removal percentage were investigated and optimized by central composite design (CCD). The optimize conditions were set as: 4.21 min, 0.019 mg, 20.02 and 13.22 mg L^?1 and 6.63 for sonication time, TiO₂–NP–AC mass, initial Cr³⁺ and Cu²⁺ ions concentration and pH, respectively. The experimental equilibrium data fitting to Langmuir, Freundlich, Temkin and Dubinin–Radushkevich models show that the Langmuir model is a good and suitable model for evaluation and the actual behavior of adsorption process and maximum adsorption capacity of 105.26 and 93.46 mg g^?1 were obtained for Cu²⁺ and Cr³⁺ ions, respectively. Kinetic evaluation of experimental data showed that the adsorption processes followed well pseudo second order and intraparticle diffusion models.     

Gold Nanoparticles Loaded on Activated Carbon as Novel Adsorbent for Kinetic and Isotherm Studies of Methyl Orange and Sunset Yellow Adsorption

In this research, a novel adsorbent gold nanoparticle loaded on activated carbon (Au-NP-AC) was synthesized by a low cost in a routine protocol. Subsequently, this novel material characterization and identification are followed by different techniques such as th eBruner–Emmet–Teller (BET) theory, scanning electron microcopy, and transmission electron microscopy analysis. Unique properties such as high BET surface area (>1229.55 m²/g) and low pore size (<22.46 Å) and average particle size lower than 48.798 Å in addition to high reactive atom and presence of various functional groups make it possible for efficient removal of sunset yellow (SY) and methyl orange (MO). Generally, the influence of variables including amount of adsorbent, initial dyes concentration, contact time, temperature on dyes removal percentage has great effect on removal percentage that their influence was optimized. The kinetic of proposed adsorption processes efficiently followed, pseudo-second-order and intra-particle diffusion approach. The equilibrium data of the removal strongly follow the Langmuir monolayer adsorption with high adsorption capacity in a short amount of time. This novel adsorbent by small amount (0.01 g) really is applicable for removal of high amount of both dyes (MO and SY) in short time (<18 minutes). Equilibrium data fitted well with the Langmuir model at all amount of adsorbent, while maximum adsorption capacity for MO 161.29 mg g^?1 and for SY 227.27 for 0.005 g of Au-NP-AC.     

Synthesis of carbon nanotube‐based nanocomposite and application for wastewater treatment by ultrasonicated adsorption process

The sorption of methylene blue (MB) and basic yellow 28 (BY28) dyes in water on Ag@ZnO/MWCNT (Ag‐doped ZnO loaded on multiwall carbon nanotubes) nanocomposite is investigated in a batch process, optimizing starting initial dye concentration, sonication time and adsorbent mass. Isotherms and kinetic behaviours of MB and BY28 adsorption onto Ag@ZnO/MWCNT were explained by extended Freundlich and pseudo‐second‐order kinetic models. Ag@ZnO/MWCNT was synthesized and characterized using X‐ray diffraction, energy‐dispersive X‐ray spectroscopy, field emission scanning electron microscopy and Brunauer–Emmett–Teller analysis. According to the experimental data, adaptive neuro‐fuzzy inference system (ANFIS), generalized regression neural network (GRNN), backpropagation neural network (BPNN), radial basic function neural network (RBFNN) and response surface methodology (RSM) were developed, and applied to forecast the removal performance of the sorbent. The influence of process variables (i.e. sonication time, initial dye concentration, adsorbent mass) on the removal of MB and BY28 was considered by central composite rotatable design of RSM, GRNN, ANFIS, BPNN and RBFNN. The performances of the developed ANFIS, GRNN, BPNN and RBFNN models were compared with RSM mathematical models in terms of the root mean square error, coefficient of determination, absolute average deviation and mean absolute error. The coefficients of determination calculated from the validation data for ANFIS, GRNN, BPNN, RBFNN and RSM models were 0.9999, 0.9997, 0.9883, 0.9898 and 0.9608 for MB and 0.9997, 0.9990, 0.9859, 0.9895 and 0.9593 for BY28 dye, respectively. The ANFIS model was found to be more precise compared to the other models. However, the GRNN method is much easier than the ANFIS method and needs less time for analysis. So, it has potential in chemometrics and it is feasible that the GRNN algorithm could be applied to model real systems. The monolayer adsorption capacity of MB and BY28 was 292.20 and 287.02 mg g^?1, respectively.     

A POSS‐Phosphazene Based Porous Material for Adsorption of Metal Ions from Water

The development of adsorptive materials continues to be an important area of research for removal of heavy metal ions from waste water. The adsorption capacity can be modulated by both physical and chemical modification of the adsorbent. Herein, we combine the unique properties of polyhedral oligomeric silsesquioxane (POSS) and organocyclophosphazene as the building units to synthesize a hybrid porous material, abbreviated as PN‐POSS. The synthetic method follows a Heck reaction between hexa(4‐bromophenoxy)cyclotriphosphazene and octavinylsilsesquioxane (OVS). The Brunauer–Emmett–Teller (BET) analysis shows that the material possesses micro‐ and mesopores of 1.5 and 3.8 nm size and a surface area on the order of 500 m² g^?1. These attributes in combination with the donor ability of the phosphazene units qualify the material for high adsorption of Pb²⁺, Hg²⁺ and Cu²⁺ ions with maximal adsorption capacities on the order of 1326, 1927 and 2654 mg g^?1, respectively. The adsorbent exhibits a good regeneration performance and can be effectively used for water treatment.     

Synthesis of CuS nanoparticles loaded on activated carbon composite for ultrasound‐assisted adsorption removal of dye pollutants: Process optimization using CCD‐RSM,equilibrium and kinetic studies

In this study, the CuS nanoparticles loaded on activated carbon (CuS‐NPs‐AC) composite was synthesized and then, characterized by XRD and FE‐SEM analyses. The prepared composite was used as a potential adsorbent for the simultaneous ultrasound‐assisted removal of Indigo Carmine (IC) and Safranin‐O (SO). The CuS‐NPs‐AC dose (0.01‐0.03 g), sonication time (1‐5 min), initial SO concentration (5‐15 mg L^‐1) and initial IC concentration (5‐15 mg L^‐1) as expectable effective parameters were studied by central composite design (CCD) under response surface methodology (RSM) to obtain an useful knowledge about the effect of simultaneous interaction between IC and SO on their removal percentage. The optimum SO and IC removal percentages were determined to be 98.24 and 97.15% at pH = 6, 0.03 g of the CuS‐NPs‐AC, 3 min sonication time, 12 and 10 mg L^‐1 of IC and SO. The values of coefficient of determination (R²) for SO and IC were 0.9608 and 0.9796, respectively, indicating the favorable fitness of the experimental data to the second order polynomial regression model. The isotherm data were well correlated with Freundlich model. The maximum monolayer adsorption capacities of 87.5 and 69.90 mg g^‐1 at room temperature for IC and SO in the investigated binary system expressed the high efficiency of the novel adsorbent for water cleanup within a short time. The investigation of correlation between time and rate of adsorption revealed that IC and SO adsorption onto the CuS‐NPs‐AC followed pseudo‐second‐order and intra‐particle diffusion simultaneously.     

Metal–organic framework MIL‐125(Ti) for efficient adsorptive removal of Rhodamine B from aqueous solution

A metal–organic framework material, MIL‐125(Ti), was solvothermally prepared and characterized using X‐ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy and surface area measurements. MIL‐125(Ti) was then used as an adsorbent for Rhodamine B (RhB) removal in aqueous solution. The adsorption kinetics, adsorption mechanism, adsorption isotherm, activation energy and various thermodynamic parameters were studied in detail. The maximum adsorption capacity of MIL‐125(Ti) for RhB was 59.92 mg g^?1. MIL‐125(Ti) appears to be a promising material for RhB adsorption from aqueous solutions. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis and characterization of SnO2/(NH4)2‐SnCl6 nanocomposites loaded on activated carbon and its application for adsorption of methylene Blue and Orange G

The present study deals with the synthesis and characterization (FE‐SEM, particle size distribution, XRD and point of zero charge) SnO₂/(NH₄)₂‐SnCl₆ nanocomposites loaded on activated carbon (SnO₂/(NH₄)₂‐SnCl₆‐NCs‐AC) and its subsequent application for the simultaneous removal of Methylene Blue (MB) and Orange G (OG) from aqueous solution. Response surface methodology (RSM) based on central composite design (CCD) give trend of influencing responses with respect to five parameters such as contact time (X₁), OG concentration (X₂), MB concentration (X₃), adsorbent mass (X₄) and pH (X₅). In later stage following recognition of significant variables and interaction, quadratic model generated which are able to predict the dyes removal in different conditions. Justification and selection of significant terms was conducted based on analysis of variance and Fisher's F‐test Optimal value of contact time, OG concentration, MB concentration, adsorbent mass and pH were set at 4.0 min, 10 mg l^?1, 20 mg L^?1, 0.015 g and 6.0, respectively, which lead to achievement of best experiment removal percentage of 97.0 and 99.5% OG and MB respectively, from their binary solutions. The whole experimental data follow pseudo‐first‐order and pseudo‐second‐order rate equations. The fitting experimental data to more available conventional model like Langmuir, Freundlich, Temkin and Dubinin‐Radushkevich isotherm models revel more ability of Langmuir model (with R² > 0.997) for explanation of system in equilibrium. The adsorption efficiency remained high even after the five cycle of reuse (99.76% and 95.56% for MB and OG, respectively).     

Selective Solid‐phase Extraction of Cu2+ by a Novel Cu(II)‐imprinted Silica Gel

A new Cu(II)‐imprinted salen functionalized silica gel adsorbent was synthesized by surface imprinting technique and was employed as a selective solid phase extraction material for Cu²⁺ removal from aqueous solutions. The samples were characterized by FT‐IR, ¹HNMR, ¹³CNMR, CHNS and DTG techniques. The BET surface area of the silica gel was also determined. The adsorbent was then used for removal of Cu²⁺ from aqueous solutions under different experimental conditions. It was concluded that the synthesized imprinted silica gel had higher selectivity and capacity compared to the non‐imprinted silica gel and the maximal adsorption capacity of 67.3 and 56.5 mg.g^?1 was obtained respectively for ion‐imprinted and non‐imprinted adsorbents. The relative selectivity factor (β) of 50.32 and 31.94 was obtained respectively for Cu²⁺/Ni²⁺ and Cu²⁺/Zn²⁺ pairs. The dynamic adsorption capacity of the imprinted adsorbent was close to the static adsorption capacity due to the fast kinetic of adsorption. Furthermore, the ion‐imprinted adsorbent was recovered and repeatedly used and satisfactory adsorption capacity with acceptable precision was obtained. Each experiment was repeated at least for three times and the mean and the standard deviation for each measurement were calculated. The applicability of the method was examined for Zayandehrood water as real sample. Acceptabe standard deviation was obtained.     

Triarylboron‐Linked Conjugated Microporous Polymers: Sensing and Removal of Fluoride Ions

A luminescent conjugated microporous polymer (BCMP‐3) has been synthesized in high yield by a carbon–carbon coupling reaction using triarylboron as a building unit. BCMP‐3 was fully characterized by using powder X‐ray diffraction analysis, Fourier transform infrared spectroscopy, ¹³C solid‐state NMR spectroscopy, field emission scanning electron microscopy, thermogravimetric analysis, and nitrogen and carbon dioxide adsorption. The new three‐dimensional conjugated framework possess a high Brunauer–Emmett–Teller (BET) specific surface area up to 950 m² g^?1 with a pore volume of 0.768 cm³ g^?1, good stability, and abundant boron sites in the skeleton. Under excited‐light irradiation, BCMP‐3 exhibits strong fluorescent emission at 488 nm with a high absolute quantum yield of 18 % in the solid state. Polymer BCMP‐3 acts as a colorimetric and fluorescent chemosensor with high sensitivity and selectivity for F^? over other common anions. In addition, the polymer also works as an adsorbent for F^? removal and shows good adsorption capacities of up to 24 mg g^?1 at equilibrium F^? concentrations of 16 mg L^?1 and a temperature of 298 K. The adsorption kinetics and isotherm were analyzed by fitting experimental data with pseudo‐second‐order kinetics and Langmuir equations. Furthermore, we highlight that BCMP‐3 is an adsorbent for fluoride removal that can be efficiently reused many times without loss of adsorption efficiency.     

Multi‐responses optimization of simultaneous adsorption of methylene blue and malachite green dyes in binary aqueous system onto Ni:FeO(OH)‐NWs‐AC using experimental design: derivative spectrophotometry method

In this research, response surface methodology (RSM) approach using Central Composite Design (CCD) coupled by derivative spectrophotometry method was applied to develop mathematical model and optimize process parameters for simultaneous adsorption of methylene blue (MB) and malachite green (MG) from aqueous solution using Ni:FeO(OH) ‐ NWs‐AC. The optimal conditions to adsorption of MB and MG in binary mixture solution from aqueous solution were found at pH 8.0, MB concentration 20 mg L^‐1, MG concentration 20 mg L^‐1, adsorbent dosage 0.033 g and contact time 40 min. At these conditions, high adsorption efficiency (99.39% and 100.0% for MB and MG, respectively) was achieved. Among experimental equilibrium, Langmuir isotherm model fitted well with maximum monolayer adsorption capacity of 28.6 and 29.8 mg g^‐1 for MB and MG, respectively. The adsorption kinetic data followed pseudo second‐order kinetics for MB and MG dyes.     

l‐Cysteine‐modified silver‐functionalized silica‐based material as an efficient solid‐phase extraction adsorbent for the determination of bisphenol A

A new silver‐functionalized silica‐based material with a core–shell structure based on silver nanoparticle‐coated silica spheres was synthesized, and silver nanoparticles were modified using strongly bound l‐ cysteine. l‐ Cysteine‐silver@silica was characterized by scanning electron microscopy and FTIR spectroscopy. Then, a solid‐phase extraction method based on l‐ cysteine‐silver@silica was developed and successfully used for bisphenol A determination prior to HPLC analysis. The results showed that the l‐ cysteine‐silver@silica as an adsorbent exhibited good enrichment capability for bisphenol A, and the maximum adsorption saturation was 20.93 mg/g. Moreover, a short adsorption equilibrium time was obtained due to the presence of silver nanoparticles on the surface of the silica. The extraction efficiencies were then optimized by varying the eluents and pH. Under the optimized conditions, good linearity for bisphenol A was obtained in the range from 0.4 to 4.0 μM (R² > 0.99) with a low limit of detection (1.15 ng/mL). The spiked recoveries from tap water and milk samples were satisfactory (85–102%) with relative standard deviations below 5.2% (n = 3), which indicated that the method was suitable for the analysis of bisphenol A in complex samples.     

Utilization of industrial waste as a novel adsorbent: Mono/competitive adsorption of chromium(VI) and nickel(II) using diatomite waste modified by EDTA

The adsorption of Cr(VI) and Ni(II) using ethylenediaminetetraacetic acid‐modified diatomite waste (EDTA‐DW) as an adsorbent in single and binary systems was investigated. The EDTA‐DW was characterized using various analytical techniques, including Fourier transform infrared spectroscopy, thermogravimetric analysis, Brunauer–Emmett–Teller measurements, X‐ray diffraction, scanning electron microscopy and energy‐dispersive spectrometry. The adsorption experiment was conducted by varying pH, adsorbent dosage, initial concentration and temperature. In the single system, the sorption data for Cr(VI) fitted the Langmuir isotherm, but the Ni(II) adsorption data fitted well the Freundlich isotherm. The maximum sorption capacity of Cr(VI) and Ni(II) was 2.9 mg g^?1 at pH = 3 and 3.64 mg g^?1 at pH = 8, respectively. The kinetic data for both Cr(VI) and Ni(II) followed well the pseudo‐second‐order kinetic model in single and binary systems. Meanwhile, the extended Langmuir and extended Freundlich multicomponent isotherm models were found to fit the competitive adsorption data for Cr(VI) and Ni(II). In addition, in the binary system, the existence of Ni(II) hindered the adsorption of Cr(VI), but the presence of Cr(VI) enhanced the removal of Ni(II). This study provides some realistic and valid data about the usage of modified diatomite waste for the removal of metal ions.