Synthesis and characterization of antibacterial chromium iron oxide nanoparticle‐loaded activated carbon for ultrasound‐assisted wastewater treatment

The aim of this study was to evaluate the surface adsorption capacity of CrFeO₃ nanoparticle‐loaded activated carbon (CrFeO₃‐NPs–AC) for the removal of a cationic dye (methyl violet, MV). CrFeO₃‐NPs were hydrothermally synthesized and loaded on AC followed by characterization using X‐ray diffraction, field‐emission scanning electron microscopy and energy‐dispersive and Fourier transform infrared spectroscopies. The CrFeO₃‐NPs were tested for in vitro antibacterial activities against Gram‐positive (Staphylococcus aureus) and Gram‐negative (Pseudomonas aeruginosa) bacteria. Minimum inhibitory and minimum bactericidal concentrations of CrFeO₃‐NPs–AC were obtained to be 50 and 100 μg ml^?1, respectively, against S. aureus and 25 and 50 μg ml^?1 against P. aeruginosa. These results indicated the antibacterial properties of CrFeO₃‐NPs–AC. To investigate the adsorption process, several systematic experiments were designed by varying parameters such as adsorbent mass, pH, initial MV concentration and sonication time. The adsorption process was modelled and the optimal conditions were determined to be 0.013 g, 7.4, 15 mg l^?1 and 8 min for adsorbent mass, pH, MV concentration and sonication time, respectively. The real experimental data were found to be efficiently explained by response surface methodology and genetic algorithm model. Kinetic studies for MV adsorption showed rapid sorption dynamics described by a second‐order kinetic model, suggesting a chemisorption mechanism. Then, the experimental equilibrium data obtained at various concentrations of MV and adsorbent masses were fitted to conventional Langmuir, Freundlich, Temkin and Dubinin–Radushkevich isotherm models. Dye adsorption equilibrium data were fitted well to the Langmuir isotherm. From the Langmuir model, the maximum monolayer capacity was calculated to be 65.67 mg g^?1 at optimum adsorbent mass.     

Electrochemical Quantification of Lead Adsorption on TiO2 Nanoparticles

This work describes a rapid easy-to-use electrochemical method for quantifying lead (Pb²⁺) adsorption on metal oxide nanoparticles (NPs), demonstrated here for titanium dioxide (TiO₂). The method was able to quantify Pb²⁺ adsorption for concentrations as low as 0.95 μM, and up to 200 μM in NP dispersions, and to differentiate ion uptake in the presence and absence of a natural organic material, humic acid (HA). The method was selective for Pb²⁺ against Cu²⁺, As³⁺, Zn²⁺, Cd²⁺ and Cr³⁺ ions when measured in the specific potential range from −0.4 to −0.6 V and was successfully demonstrated in water and home-collected dust.     

Comparative study of acid yellow 119 adsorption onto activated carbon prepared from lemon wood and ZnO nanoparticles loaded on activated carbon

Activated carbon from lemon wood (AC) and ZnO nanoparticles loaded on activated carbon (ZnO‐NP‐AC) were prepared and their efficiency for effective acid yellow 199 (AY 199) removal under various operational conditions was investigated. The dependence of removal efficiency on variables such as AY 199 concentration, amount of adsorbent and contact time was optimized using response surface methodology and Design‐Expert. ZnO nanoparticles and ZnO‐NP‐AC were studied using various techniques such as scanning electron microscopy, X‐ray diffraction and energy‐dispersive X‐ray analysis. The optimum pH was studied using one‐at‐a‐time method to achieve maximum dye removal percentage. Small amounts of the proposed adsorbents (0.025 and 0.025 g) were sufficient for successful removal of AY 199 in short times (4.0 and 4.0 min) with high adsorption capacity (85.51 and 116.29 mg g^?1 for AC and ZnO‐NPs‐AC, respectively). Fitting the empirical equilibrium data to several conventional isotherm models at optimum conditions indicated the appropriateness of the Langmuir model with high correlation coefficient (0.999 and 0.978 for AC and ZnO‐NPs‐AC, respectively) for representation and explanation of experimental data. Kinetics evaluation of experiments at various time intervals revealed that adsorption processes can be well predicted and fitted by pseudo‐second‐order and Elovich models. This study revealed that the combination of ZnO nanoparticles and AC following simple loading led to significant improvement in the removal process in short adsorption time which was enhanced by mixing the media via sonication.     

Controlled Synthesis of Hollow PbS‐TiO2 Hybrid Structures through an Ion Adsorption–Heating Process and their Photocatalytic Activity

Hollow hybrid nanostructures have received significant attention because of their unique structural features. This study reports a facile ion adsorption–heating method to fabricate hollow PbS‐TiO₂ hybrid particles. In this method, the TiO₂ spheres used as a substrate material to grow PbS are aggregates of many small amorphous TiO₂ particles, and each small particle is covered with thioglycolic acid ligands through Ti⁴⁺–carboxyl coordination. When Pb²⁺ ions are added to a colloidal solution of these TiO₂ spheres, these ions are adsorbed by sulfhydryl (‐SH) groups to form metal thiolates, and the C−S bond is dissociated by heating to release S²⁻. The S²⁻ ions react with Pb²⁺ ions to form PbS without additive sulfur sources. Additionally, the amorphous TiO₂ spheres are transformed into the anatase phase during the heating process. As a result, the crystallization of TiO₂ spheres along with the formation of PbS is simultaneously carried out by heating. During the heating process, owing to the Kirkendall effect of S²⁻ diffusion and the Ostwald ripening effect of the crystallization of amorphous TiO₂ spheres, PbS‐TiO₂ hollow hybrid structures can be obtained. The XRD and XPS characterizations proved the formation of anatase TiO₂ and PbS. The TEM characterization confirmed the formation of hollow structures in the PbS‐TiO₂ hybrid sample. The photocatalytic activity of the hollow PbS‐TiO₂ hybrid spheres have been investigated for the degradation of Cr⁶⁺ under visible light. The results show that hollow PbS‐TiO₂ hybrid spheres exhibited the highest photocatalytic activity, in which almost all the Cr⁶⁺ was degraded after 140 min.     

Adsorption of N719 Dye on Anatase TiO2 Nanoparticles and Nanosheets with Exposed (001) Facets: Equilibrium,Kinetic, and Thermodynamic Studies

Anatase TiO₂ nanosheets (TiO₂ NS) with dominant (001) facets and TiO₂ nanoparticles (TiO₂ NP) with dominant (101) facets are fabricated by hydrothermal hydrolysis of Ti(OC₄H₉)₄ in the presence and absence of hydrogen fluoride (HF), respectively. Adsorption of N719 onto the as‐prepared samples from ethanol solutions is investigated and discussed. The adsorption kinetic data are modeled using the pseudo‐first‐order, pseudo‐second‐order, and intraparticle diffusion kinetics equations, and indicate that the pseudo‐second‐order kinetic equation and intraparticle diffusion model can better describe the adsorption kinetics. Furthermore, adsorption equilibrium data of N719 on the as‐prepared samples are analyzed by Langmuir and Freundlich models; this suggests that the Langmuir model provides a better correlation of the experimental data. The adsorption capacities (q_max) of N719 on TiO₂ NS at various temperatures, determined using the Langmuir equation, are 65.2 (30 °C), 68.2 (40 °C), and 76.6 (50 °C) mg g⁻¹, which are smaller than those on TiO₂ NP, 92.4 (30 °C), 100.0 (40 °C), and 108.2 (50 °C) mg g⁻¹, respectively. The larger adsorption capacities of N719 for TiO₂ NP versus NS are attributed to its higher specific surface areas. However, the specific adsorption capacities (q_max/S_BET) at various temperatures are 1.5 (30 °C), 1.6 (40 °C), and 1.7 (50 °C) mg m⁻² for TiO₂ NS, which are otherwise higher than those for NP, 0.9 (30 °C), 1.0 (40 °C), and 1.1 (50 °C) mg m⁻², respectively. The larger specific adsorption capacities of N719 for TiO₂ NS versus NP are because the (001) surface is more reactive for dissociative adsorption of reactant molecules compared with (101) facets. Notably, the q_max and q_max/S_BET for both TiO₂ samples increase with increasing temperature, suggesting that adsorption of N719 on the TiO₂ surface is an endothermic process, which is further confirmed by the calculated thermodynamic parameters including free energy, enthalpy, and entropy of adsorption process. The present work will provide a new understanding on the adsorption process and mechanism of N719 molecules onto TiO₂ NS and NP, and this should be of great importance for enhancing the performance of dye‐sensitized solar cells.     

Selective adsorption of epigallocatechin gallate onto highly reusable gallium doped mesoporous TiO2 nanoparticles adsorbent

This work describes a potential selective adsorption of epigallocatechin gallate by Ga-doped TiO₂ nanoparticles (NPs) and showed excellent adsorption (～99%) and desorption capacity even after the 7th run. The work reports about a surfactant mediated template based synthesis of both pristine and Ga-doped TiO₂ mesoporous NPs to study the adsorption behavior EGCG. EGCG is the most abundant and bio-active compound capable of showing free radical scavenging activity, anticancer, antibacterial, and several other physiological functions. Therefore, extraction of EGCG is highly desirable for incorporation in food items that can effectively increase their nutritional and medicinal values. The pore diameter of the synthesized materials was found to be in the range 8.76–10.38 nm and the specific surface area was found to be around 25.80–58.72 m²/g. The particle size decreased from 25 nm to 15 nm in presence of Ga. A mixture of anatase and brookite phase was observed for all the synthesized TiO₂ NPs. The band gap value initially (3.40 eV) decreased in presence of minute amounts of Ga (3.44 eV) but then increased (3.59 eV) with the increase of Ga percentage. The point of zero charge (PZC) value of the materials lies in the range of 6.6–7.2. The adsorption study was carried out at different pH (1, 3, 5, 7 and 9) with variation of shaking time (1 h, 3 h, 5 h and 7 h). The material containing maximum Ga in the Ga-doped set (Set 3 TiO₂ NPs) showed highest adsorption percentage (99.45%) in pH 1 medium after 5 h shaking. The adsorption isotherm and the kinetics follow the Langmuir model and pseudo-second order respectively. Desorption was studied under high energy gamma rays, shaking, sonication and UV irradiation. The highest desorption (～96%) was obtained with sonication for 30 min.     

Interaction of CO and NO with the spinel CuCr2O4 (100) surface: A DFT study

The characteristics of CO and NO molecules at Cu²⁺ and Cr³⁺ ion sites on the CuCr₂O₄ (100) surface have been studied by first principles calculations based on spin‐polarized density functional theory (DFT). The calculated results show that adsorption energies for X‐down(C, N) adsorption vary in the order: Cu²⁺‐CO>Cr³⁺‐NO≈Cr³⁺‐CO>Cu²⁺‐NO. CO molecules are preferentially adsorbed at Cu sites, whereas NO molecules adsorb favorably at Cu²⁺ and Cr³⁺ ion sites. The C‐O and N‐O stretching frequencies are red‐shifted upon adsorption. Combining the analysis of frontier molecular orbitals and Mulliken charge, for CO and NO X‐down adsorption systems, the 5σ orbitals donate electrons and the 2π^* orbitals obtain back‐donated electrons. Although for NO with O‐down adsorption systems, the NO‐2π^* orbitals obtain back‐donated electrons from substrates without 5σ‐donation. Coadsorption calculations show the CO/NO mixture adsorb selectively at the Cu²⁺ion site but simultaneously at the Cr³⁺ ion site, respectively. © 2008 Wiley Periodicals, Inc. Int J Quantum Chem, 2008     

负载型纳米二氧化钛对重金属离子吸附性能的研究

采用溶胶-凝胶法制备二氧化钛溶胶, 将其浸渍在硅胶上, 合成了负载型纳米二氧化钛材料, 以X射线衍射(XRD)、扫描电镜(SEM)等手段对其进行了表征. 以ICP-AES为检测手段, 系统地研究了负载型纳米TiO₂材料对重金属离子Cd^2＋, Cr^3＋, Cu^2＋和Mn^2＋的吸附性能. 结果表明, 在pH 8～9范围内, 所研究的重金属离子均可被定量富集, 吸附的金属离子可用0.5 mol/L的HNO₃完全解脱. 负载型纳米二氧化钛对Cd^2＋, Cr^3＋, Cu^2＋和Mn^2＋的静态吸附容量分别为8.3, 13.1, 12.6和5.1 mg/g, 与未负载的纳米二氧化钛相近. 将其应用于环境标准样品中Cd^2＋, Cr^3＋, Cu^2＋和Mn^2＋的分离富集与测定, 结果满意.     

Study on the synthesis of novel fluorescent macrocyclic sensors and their sensitive properties for Cu2+ and Fe3+ in aqueous solution

In this work, we synthesised and characterised three novel fluorescence macrocyclic sensors containing optically active dansyl groups. The studies for the interaction of the synthesised compounds with various mental ions (Li⁺, Na⁺, K⁺, Ag⁺, Mg²⁺, Ca²⁺, Ba²⁺, Pb²⁺, Zn²⁺, Co²⁺, Cd²⁺, Hg²⁺, Ni²⁺, Cu²⁺, Mn²⁺, Cr³⁺, Al³⁺, Fe³⁺) were performed by fluorescence titration, Job’s plot, ESI-MS and DFT calculations. The results showed that the sensors 1a–1c displayed selective recognition for Cu²⁺ and Fe³⁺ ions and formed stoichiometry 1:1 complex through PET mechanism in DMSO/H₂O solution (1:1, v/v, pH 7.4 of HEPES). The binding constant (K) and detection limit were calculated.     

Calix[4]Resorcinarene Macrocycles Interactions with Cd2+, Hg2+, Pb2+, and Cu2+ Cations: A QCM‐I and Langmuir Ultra‐thin Monolayers Study

Stable ultra‐thin Langmuir monolayers of calix[4]resorcinarene derivatives, namely: C‐dec‐9‐enylcalix[4]resorcinarene‐O‐(R+)‐α‐methylbenzylamine (Ionophore I ), and C‐dec‐9‐enylcalix[4]resorcinarene‐O‐(S‐)‐α‐methylbenzylamine (Ionophore II ), were prepared at the air‐water interface. Their interactions with a series of heavy metals (HM) ions (Cu²⁺, Pb²⁺, Hg²⁺ and Cd²⁺) present in the aqueous subphase were investigated by measuring surface pressure‐area isotherms, at different concentrations. The surface pressure‐area (Π‐A) isotherms were stable and demonstrated the HM amounts influence on the limiting area (A_lim) values, therefore confirming the examined macrocycles capability to host the metallic toxicants. Additionally, a HM concentration dependence was realized and interpreted by a selective tendency of both ionophores towards Cu²⁺ and Cd²⁺ ions over Pb²⁺ and Hg²⁺, especially at high concentrations. The HM ions interactions with the applied calix[4]resorcinarene Langmuir ultra‐thin monolayers were interpreted based on the Gibbs‐Shishkovsky adsorption equation. Moreover, quartz crystal microbalance with impedance measurement (QCM‐I), was applied for the detection of HM ions in solutions. The QCM‐I results showed the effectiveness of the coated QCM‐I crystals in detecting the ions at different concentrations. The detection limit values were in the order of 0.16, 0.3, 0.65, 1.1 ppm (Ionophore I), as well 0.11, 0.45, 0.2, 0.89 (Ionophore II) for the Cu²⁺, Pb²⁺, Hg²⁺ and Cd²⁺ cations, respectively. Additionally, a selective tendency of both ionophores towards copper ions was shown.     

Adsorption properties for metal ions of waste poly(p‐phenylene terephthalamide) fiber after chemical modification

Waste poly(p‐phenylene terephthalamide) fibers (PPTA) were chemically modified through nitration and nitro‐reduction reactions to obtain nitro‐ and amino‐containing fibers and used as adsorbents for metal ions. The structures of the modified fibers were characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), X‐ray diffraction (XRD), and thermogravimetric (TG) analysis. Metal ions, such as Ni²⁺, Pb²⁺, Cu²⁺, and Hg²⁺, were used to determine the adsorption capacities of the PPTA fibers before and after modification in aqueous solutions. The results showed that the modification improved the adsorption capability of fibers and extraction ratio of metal ions significantly. The adsorption mechanism of modified PPTA fibers for metal ions was proposed. The adsorption processes of Ni²⁺, Pb²⁺, and Cu²⁺ followed well a pseudosecond‐order model onto PPTA‐NH₂. The Langmuir and Freundlich models were employed to fit the isothermal adsorption. The results revealed that the linear Langmuir isotherm model is better‐fit model to predict the experimental data. Copyright © 2010 John Wiley & Sons, Ltd.     

Photocatalytic Activity of High Aspect Ratio TiO2 Nanorods

In this article, TiO₂ nanorods (aspect ratio >20) were prepared through a polyol process and doped with metal ions (Cu²⁺, Ni²⁺, Fe³⁺, and Cr³⁺). Compared with TiO₂ nanoparticles, the TiO₂ nanorods displayed relatively higher photocatalytic activity for the degradation of copper sulfophthalocyanine. Moreover, the photocatalytic activity was greatly enhanced when the metal ions were doped in the TiO₂ nanorods.     

Removal of Cu(II), Cd(II) and Cr(III) ions from aqueous solution by dam silt

The removal of heavy metals, such as Cu(II), Cd(II) and Cr(III) from aqueous solution was studied using Chorfa silt material (Mascara, Algeria). The main constituents of silt sediment are quartz, calcite and mixture of clays. The experimental data were described using Freundlich, Langmuir, Dubinin–Radushkevich (D–R) and Langmuir–Freundlich models. The adsorbed amounts of chromium and copper ions were very high (95% and 94% of the total concentration of the metal ions), whereas cadmium ion was adsorbed in smaller (55%) amounts. The Langmuir–Freundlich isotherm model was the best to describe the experimental data. The maximum sorption capacity was found to be 26.30, 11.76 and 0.35 mg/g for Cr³⁺, Cu²⁺ and Cd²⁺, respectively. The results of mean sorption energy, E (kJ/mol) calculated from D–R equation, confirmed that the adsorption of copper, chromium and cadmium on silt is physical in nature.     

Adsorption of metal ions by microwave assisted grafting of cross‐linked chitosan beads. Equilibrium,isotherm, thermodynamic and desorption studies

Chemical modification of chitosan has become increasingly essential due to chitosan versatility that enables the material to be easily modified in a way of increasing its properties in adsorption processes. In this investigation, chitosan solution was cross‐linked with glutaraldehyde the cross‐linked solution was used in producing the beads and thereafter grafted with ethylene acrylic acid. The chemical functionalities of the beads were obtained by Fourier transform infrared spectroscopy (FTIR), Scanning electron microscope (SEM), X‐ray diffraction (XRD) and Thermogravimetric analysis (TGA). Adsorption of Pb²⁺, Cu²⁺, Ni²⁺, Zn²⁺, Cr⁶⁺ and Cd²⁺ ions from single component aqueous mixture by grafted cross‐linked chitosan beads (GXXB) was studied as a function of pH, temperature, initial concentration, contact time, agitation speed and ionic strength. Equilibrium data was obtained from the adsorption experiment, the data were applied in isotherm, thermodynamics and kinetic studies. The Langmuir, Temkin and Dubinin‐kaganer‐Radushkevich (DKR) model were successful in describing the isotherm data for the considered metal ions while the Freundlich model was not efficient in describing the experimental data. Pseudo‐second order and intra‐particle model described the kinetic data quite well. Thermodynamic parameters such as Gibb's free energy change (?G^o), enthalpy change (?H^o) and entropy change (?S^o) were calculated and the results showed the adsorption of Pb²⁺, Cu²⁺, Ni²⁺, Zn²⁺, Cr⁶⁺ and Cd²⁺ ions onto GXXB is spontaneous and endothermic in nature. Regeneration of the used adsorbent was effective for the studied metal ions.     

Poly(ammonium/ pyridinium)-chitosan Schiff base as a smart biosorbent for scavenging of Cu2+ ions from aqueous effluents

Chitosan Schiff bases (CSBs) decorated with ammonium or pyridinium motifs for recyclable biosorption of Cu²⁺ ions from aqueous effluents were tailored by grafting of salicylaldehyde ionic liquids (Sal-ILs) onto chitosan surface. Biosorption capacity of poly(ionic-salicylidene) CSBs (PISCSB_1,2) was compared with chitosan and poly(neural-salicylidene) CSBs (PSCSB). The ionic salicylidene-functionalized chitosan, poly(pyridinium)-salicylidene chitosan Schiff base (PISCSB₂), exhibited excellent adsorption capacity (99.1%), in comparison to chitosan (85%) and PSCSB (95%). Biosorption of Cu²⁺ ions onto PSCSB followed pseudo-first-order kinetic model while onto chitosan (CS) and PISCSB_1,2 followed pseudo-second-order kinetic model. However, Cu²⁺ ions biosorption onto all biosorbents fitted Langmuir adsorption isotherm model. Negative values of ΔG^o and ΔH^o confirmed the spontaneity and exothermic behavior of adsorption process. The new biosorbents could be successfully regenerated in aqueous 0.01 M EDTA solution with negligible loss in their adsorption capacity. Consequently, our new chitosan-based biosorbents may offer promising green and renewable scavengers for Cu²⁺ ions from wastewater.     

Rapid detection of trace Cu2+ using an l‐cysteine based interdigitated electrode sensor integrated with AC electrokinetic enrichment

Copper is an indispensable trace element for human health. Too much or too little intake of copper ion (Cu²⁺) can lead to its own adverse health conditions. Therefore, detection of Cu²⁺ is always of vital importance. In this work, a simple sensor was developed for rapid detection of trace Cu²⁺ in water, in which L‐cysteine (Cys) as a molecular probe was self‐assembled on a gold interdigital electrode to form a monolayer for specific capture of Cu²⁺. The interfacial capacitance of interdigital electrode was detected to indicate the target adsorption level under an AC signal working as the excitation to induce directed movement and enrichment of Cu²⁺ to the electrode surface. This sensor reached a limit of detection of 4.14 fM and a satisfactory selectivity against eight other ions (Zn²⁺, Hg²⁺, Pb²⁺, Cd²⁺, Mg²⁺, Fe²⁺, As³⁺, and As⁵⁺). Testing of spiked tap water was also performed, demonstrating the sensor's usability. This sensor as well as the detection method shows a great application potential in fields such as environmental monitoring and medical diagnosis.     

Interaction of ZnII Porphyrin with TiO2 Nanoparticles: From Mechanism to Synthesis of Hybrid Nanomaterials

The mechanism of interaction of Zn porphyrin (ZnPP) with TiO₂ surfaces is investigated with a view to optimizing the synthesis of hybrid nanomaterials. The strategy consists of studying the adsorption of ZnPP on TiO₂ flat surfaces by taking advantage of complementary surface characterization techniques. Combining a detailed X‐ray photoelectron spectroscopic analysis with AFM imaging allows ZnPP–surface and ZnPP intermolecular interactions to be discriminated. Probing the adsorption of ZnPP on TiO₂ nanoparticles (NPs) reveals the dominant role of ZnPP‐mediated interactions, which are associated with the formation of ZnPP multilayers and/or with the state of aggregation of NPs. These preliminary investigations provide a guideline to synthesizing a novel ZnPP–TiO₂ hybrid nanomaterial in a one‐step protocol. In this material, ZnPP molecules are presumably involved in the TiO₂ lattice rather than on the NP surface. Furthermore, ZnPP molecules preserve their electronic properties within the TiO₂ NPs, and this makes the ZnPP–TiO₂ hybrid nanomaterial an excellent candidate for nanomedicine and related applications, such as localization of nanoparticles in cells and tissues or in photodynamic therapy.     

Optimizing adsorptive removal of malachite green and methyl orange dyes from simulated wastewater by Mn‐doped CuO‐Nanoparticles loaded on activated carbon using CCD‐RSM: Mechanism,regeneration, isotherm,kinetic, and thermodynamic studies

In the present work, Mn‐doped CuO‐NPs‐AC was prepared by a simple method, characterized using various techniques such as FESEM, EDX, XRD, PSD, and pH_pzc and finally used for the adsorption of malachite green (MG) and methyl orange (MO) in a number of single and binary solutions. A series of adsorption experiments were conducted to investigate and optimize the influence of various factors (such as different pH, concentration of MG and MO, adsorbent mass, and sonication time) on the simultaneous adsorption of MG and MO using response surface methodology. Under optimal conditions of pH 10, adsorbent dose of 0.02 g, MG concentration of 30 mg L^?1, MO concentration of 30 mg L^?1, and sonication time of 4.5 min at room temperature, the maximum predicted adsorption was observed to be 100.0%, for both MG and MO, showing that there is a favorable harmony between the experimental data and model predictions. The adsorption isotherm of MO and MG by Mn‐doped CuO‐NPs‐AC could be well clarified by the Langmuir model with maximum adsorption capacity of 320.69 mg g^?1 and 290.11 mg g^?1 in the single solution and 233.02 mg g^?1 and 205.53 mg g^?1 in the binary solution by 0.005 g of adsorbent mass for MG and MO, respectively. Kinetic studies also revealed that both MG and MO adsorption were better defined by the pseudo‐second order model for both solutions. In addition, the thermodynamic constant studies disclosed that the adsorption of MG and MO was likely to be influenced by a physisorption mechanism. Eventually, the reusability of the Mn‐doped CuO‐NPs‐AC after six times showed a reduction in the adsorption percentage of MG and MO.