CaO和NaCl焙烧混合稀土精矿过程中的分解反应

用XRD和TG-DTA热分析技术, 研究了含独居石和氟碳铈镧矿的混合稀土精矿在100～1000 ℃焙烧过程中, 添加CaO, NaCl时, REPO4和REFCO3的分解反应. 研究结果表明: 不添加CaO和NaCl时, 仅在377～450 ℃范围内存在REFCO3的分解反应, 其产物是REOF, RE2O3, 以及Ce2O3进一步的氧化产物CeO2, 而REPO4不分解; 添加CaO后在660～750 ℃之间, CaO有3种分解作用: (1) CaO分解REPO4, 其产物是RE2O3和Ca3(PO4)2. (2) CaO分解REOF, 其产物是RE2O3和CaF2. (3) CaO和REOF的分解产物CaF2共同作用分解REPO4, 其分解产物为RE2O3, Ca5F(PO4)3; 添加CaO, NaCl后, 混合精矿的分解率明显提高, NaCl的作用是为反应体系提供了液相, 促进了固相反应物间的传质过程, 加快了反应速度. 与此同时NaCl还可能参加了CaO分解REPO4的反应.     

NaSn2(PO4)3的水热合成与结构性能研究

应用水热合成技术制备了具有NASICON型结构的NaSn₂(PO₄)₃离子导体.研究了其结构与电导性能.结果表明,水热合成制备NaSn₂(PO₄)₃离子导体化合物,是一条新的途径,它比传统的高温固相反应方法更加方便有效,尤其容易获得较纯的物相及单晶,并且水热晶化产物与固相反应产物具有相同的结构和性能.     

机械球磨固相化学反应制备AlH3及其放氢性能

以LiAlH4和AlCl3为原料, 采用机械球磨固相化学反应方法制备了铝氢化合物, 通过X射线衍射(XRD)、热分析(TG-DSC)和质谱(MS)分析等方法对反应产物进行分析和表征, 研究了不同球磨时间(4、8、15和20 h)对LiAlH4+AlCl体系的固相反应转变规律﹑合成产物和放氢性能的影响. 研究结果表明, 随球磨时间的增加, 球磨固相反应按3LiAlH4+AlCl3→4AlH3+3LiCl方向进行, 形成了非晶态铝氢化合物AlH3, 球磨20 h时反应基本完全. 球磨产物的放氢动力学特性随球磨时间增加而改善, 其放氢起始温度均低于100 ℃, 最大放氢量达到2.6%-3.6%(H2)(w), 接近反应体系的理论储氢量4.85%(H2)(w). 球磨过程中反应产物形成LiCl·H2O以及少量AlH3发生分解是影响球磨产物最大放氢量的主要因素.     

共沉淀-气固法合成Sm2Ti2S2O5催化剂及可见光制氢性能

用一种改进的共沉淀-气固反应法制备了Sm2Ti2S2O5光催化剂.通过紫外-可见(UV-Vis)漫反射、X射线衍射(XRD)对催化剂进行了表征.以甲酸为电子给体,考察了光催化剂在可见光照射下的制氧活性.研究结果表明,相对于传统的高温固相反应来说,用改进的共沉淀-气固反应法制备Sm2Ti2S2O5,能有效地降低反应温度,...     

三元金属二硫化物纳米管的制备

1992年和 1 993年 ,Tenne等[1,2 ] 先后报道了具有类富勒烯和纳米管状结构的 WS2 和无机类富勒烯 Mo S2 .此后 ,无机类富勒烯化合物的制备与合成成为国内外学者的关注热点之一 .但采用化学方法制备纳米金属二硫化物时 ,多面体或洋葱状结构的 Mo S2 或 WS2 晶体的形成概率小 (这与碳的情况相似 ,也许通过扩展反应区内的温度梯度可以增加形成上述两种结构的可能性 [3] ) .另外 ,采用气固相反应制备洋葱状 WS2 的过程中 ,当每批次的量超过 1 5g时 ,无机类富勒烯 (IF)纳米颗粒的质量降低 ;同时 ,若滤筛中粉末厚度过大 ,相当大的凝聚团块开…     

不同模拟体液中水化硅酸三钙固化体的体外生物活性行为(英文)

研究水了化硅酸三钙(Ca3SiO5,C3S)固化体的体外生物活性行为。结果表明,干C3S固化体中含有23.97wt%的Ca(OH)2,Ca(OH)2的溶解导致模拟体液(Simulated Body Fluids,SBF)的pH值上升;磷灰石颗粒优先诱导沉积于C3S固化体表面,随后碳酸钙和磷灰石颗粒共同沉积于C3S固化体表面;HCO3-是SBF模拟体液内主要的缓冲离子;Ca(OH)2碳化和CaCO3沉积主要导致SBF的pH值下降。由于离子交换作用的减弱,C3S固化体表面最终被磷灰石完全覆盖,磷灰石的沉积促使SBF的pH值进一步降低。因此,对于C3S和其衍生材料的体外生物活性和生物相容性必须考虑到HCO3-在体内的实际含量和行为。     

机械球磨固相化学反应制备AlH3及其放氢性能

以LiAlH4和AlCl3为原料,采用机械球磨固相化学反应方法制备了铝氢化合物,通过X射线衍射(XRD)、热分析(TG-DSC)和质谱(MS)分析等方法对反应产物进行分析和表征,研究了不同球磨时间(4、8、15和20 h)对LiAlH4+AlCl体系的固相反应转变规律合成产物和放氢性能的影响.研究结果表明,随球磨时间的增加,球磨固相反应按3LiAlH4+AlCl3→4AlH3+3LiCl方向进行,形成了非晶态铝氢化合物AlH3,球磨20 h时反应基本完全.球磨产物的放氢动力学特性随球磨时间增加而改善,其放氢起始温度均低于100℃,最大放氢量达到2.6%-3.6%(H2)(w),接近反应体系的理论储氢量4.85%(H2)(w).球磨过程中反应产物形成LiCl·H2O以及少量AlH3发生分解是影响球磨产物最大放氢量的主要因素.     

花状硫化铟纳米多级结构的液相合成及形貌调控机理

以C2H5NS和In(NO3)3为前驱物,采用简单的液相法成功制备了In2S3纳米多级结构,C2H5NS作为硫源的同时也起到了模板剂的作用.研究结果表明,前驱物浓度对In2S3形貌控制起着重要作用.随着In(NO3)3/C2H5NS摩尔比从1∶1.5增加到1∶6,In2S3纳米花呈现了不同的形貌和尺寸.XRD谱图显示,In2S3纳米花晶体具有立方结构.SEM和TEM照片显示,制备的In2S3纳米结构呈多级花状结构,这种结构由纳米片堆积组装而成.通过第一性原理计算并结合实验结果对C2H5NS影响纳米片生长的机理进行了分析,结果表明C2H5NS在In2S3(001)晶面上的吸附可以有效降低晶面的表面能,起到稳定晶面的作用;纳米花的形成是在C2H5NS影响In2S3的晶面稳定性及其成核速率之间的一个协同效应.In2S3纳米晶的形貌可以通过调整反应溶液中的C2H5NS浓度来调节.     

室温固相反应合成棒状Pb(OH)I及菱形PbI_2/TEA杂化物

以醋酸铅和碘化钾为原料,通过在体系中添加乙醇胺、二乙醇胺和三乙醇胺,采用一步室温固相反应成功制备出羟碘铅(Pb(OH)I)纳米棒和菱形结构的PbI2/TEA(TEA为三乙醇胺)杂化物,利用XRD、IR、TG、SEM和元素分析对其组成、结构和形貌进行了表征。实验结果表明:乙醇胺、二乙醇胺和三乙醇胺,在醋酸铅与碘化钾固相反应体系中起到了双重作用。一方面充当反应原料,形成了Pb(OH)I和PbI2/TEA;另一方面充当软模板的作用,诱导产物形成了棒状和菱形结构。     

掺杂铁酸盐的制备、结构及其催化分解CO2成C的性能

采用混合离子共沉淀法制备掺杂铁酸盐,采用XRD,TGA和H2-TPR等手段对其结构进行了表征,并考察了其直接催化分解CO2成C的性能.研究结果表明,用混合离子共沉淀法能够制备出纳米级晶粒、且为单一尖晶石结构的Cr3+掺杂的NiFe2O4.所掺杂的Cr3+进入NiFe2O4的晶格B位,极大地促进了NiFe2O4在还原氧化过程中结构的稳定性,分解CO2反应后,NiFe2O4的结构易恢复,从而明显地提高了其分解CO2成C反应的循环寿命(35次以上)和积炭量(25.3%).     

Recherche de matériauxa`conductivitéionique ame´liore´e de´rivant des hydrurofluorures de calcium CaF2−xHx: conductivite´ ionique des phases Ca1−yNay(F2−xHx)1−y/2

The doping of CaF_2?xH_x hydridefluorides by aliovalent ions is studied, the aim being the preparation of materials of improved ionic conductivity. It is shown that doping by monovalent Na⁺ ions is possible. Three hydrogen-rich phases, formulated Na_yCa_1?y(F_2?xH_x)_1?y/2 have been studied. Their conductivity is mainly ionic, but, compared with the same doping in CaF₂, the conductivity enhancement is low. This result is interpreted from energetic and structural considerations.     

Crystallization, mechanical properties and in vitro bioactivity of sol–gel derived Na2O–CaO–SiO2–P2O5 glass–ceramics by partial substitution of CaF2 for CaO

The partial substitution of CaF₂ for CaO in the Na₂O–CaO–SiO₂–P₂O₅ system was conducted by the sol–gel method and a comparison of the glass–ceramic properties was reported. Based on thermogravimetric and differential thermal analysis, the gels were sintered with a suitable heat treatment procedure. The glass–ceramic properties were characterized by X-ray diffraction, fourier-transform infrared spectroscopy, scanning electron microscopy, energy dispersive spectrometer and so on, and the bioactivity of the glass–ceramic was evaluated by in vitro assays in simulated body fluid. Results indicate that with the partial substitution of CaF₂ for CaO in glass composition, the volume density, apparent porosity, bending strength and microhardness of the glass–ceramics have been significantly improved. Furthermore, CaF₂ promotes glass crystallization which does not inhibit the glass–ceramic bioactivity.     

施主掺杂对BaTiO3钙钛矿半导体纳米晶光催化性能的影响

以沉淀法制备的Cu_2O为牺牲模板剂,采用水热法制备La施主掺杂的BaTiO_3钙钛矿半导体纳米晶,借助X射线衍射(XRD)、透射电子显微镜(TEM)、高分辨透射电镜(HRTEM)、X射线光电子能谱((XPS)、扫描电子显微镜(SEM)、紫外-可见漫反射光谱(UV-Vis DRS)表征La掺杂的BaTiO_3晶的物相、微观形貌及光催化性能。结果表明,La掺杂BaTiO_3构建了晶体缺陷,有效提高了BaTiO_3的光催化性能。当掺杂量为4%(w/w)时,样品的光催化性能最好,在可见光照射360 min后,对4-硝基苯酚溶液的降解率可达到93.2%。该催化剂5次循环后的活性仍然大于86.7%,表明La施主掺杂的BaTiO_3是一种有效的可见光催化剂。     

内含C60掺杂空穴传输层的量子点电致发光器件

聚乙烯咔唑（PVK）中掺入富勒烯（C₆₀）的重量比从0%到10%变化,以研究在空穴传输层中掺杂C₆₀后对量子点电致发光器件性能的影响。掺入C₆₀后的PVK薄膜在氧化铟锡（ITO）基底上均方根粗糙度从3nm降至1.6nm。另外,掺入C₆₀后有利于空穴的注入和传输,改善器件中电子和空穴的平衡,提高了器件的效率。     

内含C_(60)掺杂空穴传输层的量子点电致发光器件

聚乙烯咔唑(PVK)中掺入富勒烯(C60)的重量比从0%到10%变化,以研究在空穴传输层中掺杂C60后对量子点电致发光器件性能的影响。掺入C60后的PVK薄膜在氧化铟锡(ITO)基底上均方根粗糙度从3 nm降至1.6 nm。另外,掺入C60后有利于空穴的注入和传输,改善器件中电子和空穴的平衡,提高了器件的效率。     

CaF2对CaO-CaF2-B2O3-SiO2：Sm2O3玻璃的光致发光增强效应

用高温熔融法制备了掺杂Sm₂O₃的CaO-CaF₂-B₂O₃-SiO₂(CFBS:Sm)发光玻璃材料, 并借助X射线衍射(XRD)谱、傅里叶变换红外(FTIR)光谱以及光致发光(PL)光谱等分析手段研究了玻璃基体中CaF₂的摩尔分数及其结构、红外透过性能以及荧光性能的关系. XRD和FTIR测试表明, 玻璃基体中引入CaF₂并未引起非晶结构的变化但其红外透过峰发生移动. 光谱学测试表明, CFBS:Sm发光玻璃在404 nm波长激发下出现对应于Sm³⁺离子位于566、603和650 nm的特征荧光峰, 其发光颜色为橙红色(x=0.531, y=0.371). 此外, 随着玻璃基体中CaF₂摩尔分数的增加, CFBS:Sm发光玻璃的荧光发射强度、荧光寿命(Sm³⁺的⁴G_5/2能级)和荧光量子效率也表现出增大的趋势. 这种CFBS:Sm发光玻璃中荧光发射强度和荧光寿命的提高主要是由于玻璃基体中的CaF₂替代CaO引起基体相互作用和声子能量降低、无辐射跃迁减弱造成的.     

SYNTHESIS AND CHARACTERIZATION OF A NOVEL DOPANT (C3-ABSA) FOR SYNTHESIZING TUBULAR POLYANILINE*

 4-(3-(4-((4-Nitrophenyl)azo)phenyloxy)propyl)aminobenzene sulfonic acid (C3-ABSA) was synthesized by the reaction of 3-bromide-l-(4-((4-nitrophenyl)azo)phenyloxy)propane (B3) with sodium p-aminobenzene sulfonic acid (ABSA)and acidification with hydrochloric acid. The C3-ABSA was characterized by FTIR, ¹H-NMR and second ion mass spectrum (SIMS). The molecular formula of dehydrated C3-ABSA was estimated to be ca. C_{21H20O6N4S by SIMS. Its decomposition temperature was measured by TGA to be ca. 232℃. It was found that tubular polyaniline (PANI) with a conductivity of 1.1 S/cm at room temperature was successfully synthesized by in-situ doping polymerization in the presence of C3-ABSA as a dopant.}     

From Composites to Solid Solutions: Modeling of Ionic Conductivity in the CaF2–BaF2 System

By using calcium fluorite and barium fluorite as test materials, we demonstrated that homovalent “dopants” can greatly affect ionic conductivity through locally changing the defect density. Whilst this doping is a state‐of‐the‐art effect in the case of dopants that replace native ions of different charge (heterovalent dopants), it is a rather surprising effect at a first glance for substitutional dopants of the same charge; here, the phenomenon is not electrostatic, but elastic in nature. As a consequence of size mismatch, the smaller Ca atoms in the BaF₂ lattice favored the formation of interstitial sites that were located close to the Ca atoms, whilst doping larger Ba species into the CaF₂ phase favored vacancy formation. In terms of conductivity, and in agreement with the different mobilities, the first doping effect was favorable, whilst the other decreased conductivity. The concentration effects were formalized by a heterogeneous Frenkel reaction that was distinguished from the mean Frenkel reaction by additional (elastic) trapping that became more pronounced the lower the temperature. It was very revealing to relate this phenomenon to CaF₂–BaF₂ multilayers and composites. In very general terms, these effects in the solid solutions were understood as being the atomistic limit of the interfacial charge‐transfer that occurred at the hetero‐interface of the crystallites or films, and reflected the transition from heterogeneous doping (higher‐dimensional doping) to homogeneous doping (zero‐dimensional doping).     

Calorimetric studies of special cements

The kinetics and even the mechanism of cement reaction with water can be successfully investigated by use of microcalorimetry. In this study this method was applied to follow the hydration of the new family of portland cements containing C₁₂A₇ ^* and C₁₁A₇·CaF₂ addition as well as special cement with C₃A replacement by calcium sulphoaluminate. It has been found that C₁₁A₇·CaF₂ acted as hydration retarder. The heat evolution curves for C₁₂A₇ containing samples without CaF₂ are very similar to those for the reference portland cement samples. XRD and SEM studies confirm the results described above, relating to the retardation of alite hydration. The process is positively modified by the addition of anhydrite. In the presence of calcium sulphoaluminate (4CaO·3Al₂O₃·SO₃) the hydration at early stage occurs with the rapid formation of large amount of the ettringite phase. The calcium fluoride acts as a set retarder. The full compatibility of calorimetry with SEM and XRD results should be underlined. In cement chemistry the following notation is used:C=CaO,A=Al₂O₃,S=SiO₂,H=H₂O etc. for the main oxide constituents of portland cement clinker and hydrates.     

纳米TiO2-SiO2复合光催化剂的超临界流体干燥法制备及其光催化性能研究

本文以廉价无机盐Na₂SiO₃·9H₂O和TiCl₄溶液为原料,采用化学包覆结合超临界流体干燥(SCFD)法制备纳米级TiO₂-SiO₂复合光催化剂。利用XRD、TEM、NMR等手段对复合粉体进行了表征。结果表明,采用超临界流体干燥法可直接制得锐钛矿型TiO₂-SiO₂纳米复合光催化剂,其中SiO₂以单分散、无定形形式存在。以苯酚和邻苯二酚紫光催化降解为反应模型,考察了TiO₂-SiO₂复合光催化剂的催化性能。证明掺入适量SiO₂的TiO₂-SiO₂纳米复合光催化剂既减少了TiO₂的用量、降低了成本,又在某种程度上提高了TiO₂的光催化活性。SiO₂的引入可以有效抑制纳米粒子粒径的长大和晶相的转变,增强了二氧化钛纳米粒子的热稳定性。二氧化硅的最优掺杂量为15%(质量分数)。