一种多层白色磷光有机电致发光器件的制备及性能研究

制备了一种结构为ITO/NPB/NPB:Ir(piq)₂(acac)/CBP:TBPe/BAlq:rubrene/BAlq/Alq₃/Mg:Ag的白色磷光有机电致发光器件.其中空穴传输型主体NPB掺杂磷光染料Ir(piq)₂(acac)作为红色发光层,双载流子传输型主体4,4′-N,N′-dicarbazole-biphenyl (CBP)掺杂TBPe作为蓝色发光层,电子传输型主体材料BAlq掺杂rubrene作为绿色发光层.以上发光层夹于 关键词： 电致发光 磷光染料 异质结 白光     

不同主体双发光层白色有机电致发光器件的性能研究

制备了结构为ITO/NPB/CBP:TBPe:rubrene/BAlq:Ir(piq)₂(acac)/BAlq/Alq₃/Mg:Ag的白色磷光有机电致发光器件.利用两种不同的主体材料,即用双载流子传输型主体材料CBP掺杂荧光染料TBPe及rubrene作为蓝光和橙黄光发光层;用电子传输型主体材料BAlq掺杂磷光染料Ir(piq)₂(acac)作为红色发光层.以上双发光层夹于空穴传输层NPB与具有电子传输性的阻挡层BALq之间.讨论了如何控制 关键词： 有机电致发光 磷光染料 掺杂 白光     

同时掺杂磷光和荧光染料的白色有机电致发光器件性能研究

以磷光染料Ir(piq)₂(acac)作为发光掺杂剂,掺入空穴传输性主体材料NPB中得到红色发光层,荧光材料TBP掺入到主体CBP中作为蓝色发光层,制备了结构为ITO/NPB/NPB：Ir(piq)₂(acac)/CBP/CBP：TBPe/BCP/ALq/Mg：Ag的双发光层白色有机电致发光器件.其中ALq₃、未掺杂的NPB和CBP及BCP层分别作为电子传输层、空穴传输层和激子阻挡层.实验中通过调节发光层厚度及Ir(piq)_{2关键词： 磷光 激子阻挡层 有机电致发光}     

一种改善红光顶发射OLED色纯度及角度依赖特性的方法研究

在Si/SiO₂衬底上生长金属银作为阳极,4,4,4-tris(3-methylphenylpheny-lamino)-triphenylamine(m-MTDATA):MoOx/m-MTDATA/N,N-bis-(1-naphthyl)-N,N-diphenyl-1,1-biphenyl-4,4-diamine(NPB)作为空穴注入及传输层,发光层采用4,4-N,N-dicarbazole-biphenyl(CBP)掺杂磷光染料(1-(phenyl)isoquinoline)iridium(III) acetylanetonate(Ir(piq)₂(acac))的结构,4,7-di-phenyl-1,10-phenanthroline(BPhen)作为空穴阻挡层及电子传输层,阴极为LiF(1 nm)/Al(2 nm)/Ag(20 nm)复合阴极结构.通过在光取出的复合阴极上方生长一层CBP光学覆盖层,有效地改善了复合阴极膜系的透射率,从而改善了顶发射结构的光学耦合输出特性,在提高器件的正向发光效率的同时还使色坐标往深红光区移动.并且生长光学覆盖层结构的器件角度依赖特性明显得到改善,这对于制作高显示质量的显示器件具有重要意义.在原有结构的基础上增加20 nm的NPB掺杂磷光染料Ir(piq)₂(acac)作发光层,从而得到双发光层结构为NPB:Ir(piq)₂(acac)(1%,20 nm)/CBP:Ir(piq)₂(acac)(1%, 20 nm).由于NPB具有较高的空穴迁移率,避免了由于光学厚度的增加而引起器件工作电压的大幅升高,而双发光层的结构有利于增大激子复合区域,提高辐射复合几率,减少非辐射损耗,实现主客体之间高效的三线态能量传递,相对单发光层顶发射结构,双发光层结构不仅提高了器件的发光效率,而且改善了器件的色坐标.     

基于CBP:BCzVB:Btp2Ir(acac)体系的白色有机电致发光器件色度飘移研究

以苯乙烯类化合物BCzVB为蓝色荧光染料,以铱配合物Btp_2Ir(acac)为红色磷光染料,共掺杂到CBP基质中作为发光层,制备了白色有机电致发光器件,研究了该体系发光色度漂移的原因。器件在掺杂CBP:6?zVB: 0．2%Btp_2Ir(acac),在．驱动电流从4～200 mA/cm~2变化范围内,发光色坐标从(0．340,0．273)飘移到(0．308, 0．273),色坐标轻微蓝移。对器件发光光谱和亮度-电流密度曲线等分析表明:器件色度的轻微蓝移是由于CBP基质向Btp_2Ir(acac)掺杂剂完全的能量传递、荧光染料BCzVB向磷光染料Btp_2Ir(acac)不完全的能量传递等内在物理过程和磷光染料Btp_2Ir(acac)自身发光饱和等特性共同决定的。     

以BAlq为主体的高效高色纯度的红色有机电致磷光器件

以铱配合物红色磷光体Ir(piq)₂(acac)为掺杂剂,制备了基于BAlq材料的红色电致磷光器件,其结构为ITO/NPB(30nm)/Ir(piq)₂(acac):BAlq(25nm)/BCP(13nm)/Alq₃(35nm)/LiF(1nm)/Al(1000nm),当掺杂浓度为8%的时候,器件发光的色坐标为(x=0.67,y=0.32),基本满足了全色显示对红色发光的要求。在电压为16V时,器件达到最高亮度9380cd/m²。在电流密度为5.45mA/cm²时,外量子效率达到最大5.7%。由于磷光体Ir(piq)₂(acac)的磷光寿命较短,所以器件在高电流密度下,仍然保持较高的外量子效率。电流密度为100mA/cm²时,外量子效率仍然维持在4.7%。进一步研究表明在器件中短程的Dexter能量传递以及红光染料对空穴的直接捕获两种机制同时存在。     

以CBP为主体的高色纯度红色磷光有机电致发光器件

以铱配合物红色磷光体Ir(piq)2(acac)为掺杂剂,制备了基于CBP材料的一系列红色电致磷光器件(PLED),其结构为ITO/CuPC(1nm)/Ir(piq)2(acac):CBP(25nm)/BCP(10nm)/Alq3(35nm)/LiF(1nm)/Al(100nm),对4种不同的掺杂剂浓度进行了比较,研究了它们的电致发光特性。得出了Ir(piq)2(acac)的最佳掺杂比为8%,此时器件的色坐标都非常接近标准红色,且色纯度超过了98%以上;在16V时,色坐标为(x=0.67,y=0.32),色纯度为99.74%,基本满足了全色显示对红色发光的要求。     

两种磷光材料在聚合物掺杂体系中的发光特性研究

磷光材料由于可以利用电致激发所形成的单重态和三重态激子,因而可以得到接近100%的内量子效率。文章对常温下基于磷光材料Ir(ppy)₃及Ir(piq)₃掺杂PVK薄膜为发光层的器件的光学和电学特性进行了研究。光致发光的结果显示相同掺杂质量比下由PVK到Ir(piq)₃的能量传递比到Ir(ppy)₃更加困难。通过研究两种掺杂体系不同质量比的电致发光特性,可以认为这两种磷光器件的发光主要来自于磷光客体分子直接俘获载流子发光而非主体的能量传递。Ir(piq)₃掺杂体系对掺杂比例的依赖更为明显,从能级结构分析,认为是由于Ir(piq)₃的更低的HOMO及高的LUMO能级,而比Ir(ppy)₃具有更好的载流子俘获和传输特性。     

Ir配合物染料调节有机发光二极管发光特性

为了研究有机发光二极管(OLED)中发光特性与材料能带结构的关系,把不同的Ir配合物染料掺杂到结构相同的OLED器件中。OLED结构为ITO/NPB/CBP∶染料/TPBi/Mg∶Ag/Ag,染料分别为Ir(MDQ)2(acac)、Ir(ppy)3和Firpic。实验表明,这3种染料对应的掺杂器件分别发红光、绿光和蓝光。3个器件的阈值电压基本一致((6为了研究有机发光二极管(OLED)中发光特性与材料能带结构的关系,把不同的Ir配合物染料掺杂到结构相同的OLED器件中。OLED结构为ITO/NPB/CBP:染料/TPBi/Mg:Ag/Ag,染料分别为Ir(MDQ)₂(acac)、Ir(ppy)₃和Firpic。实验表明,这3种染料对应的掺杂器件分别发红光、绿光和蓝光。3个器件的阈值电压基本一致((6±0.1) V),但是,在100 cd/m²亮度下,绿光器件外量子效率最高(7.64%),蓝光器件外量子效率(5.65%)与绿光相近,红光器件外量子效率最低(2.75%)。分析认为,由于染料的掺杂浓度低,器件结构和载流子传输特性变化小,因而掺杂对阈值电压影响小;CBP与掺杂染料间存在能量转移,红色染料能级差小,非辐射跃迁几率大,发光效率最低;相比于绿光,蓝色染料能级差大,跃迁几率小,因此发光效率比绿光低。实验还发现,染料的发光波长与其能级差相比有红移现象,分析认为,这是由激发态能量振动弛豫和系间窜越过程形成的。     

白色有机电致发光器件中多组份电致激基复合物形成及抑制

从荧光-磷光复合结构的有机电致发光器件的研究入手,采用OXD-7作为蓝色荧光发光层,Ir(MDQ)2acac掺杂在母体材料作为红橙磷光发光层,设计制备了双波段白光有机电致发光器件。研究中发现,OXD-7,Alq3和NPB的三组分协同作用可以导致电致激基复合物的产生,以及由此导致的光谱红移,并使得器件发光效率降低。通过插入TDAF中间层可以有效地抑制激基复合物的产生,同时,通过控制载流子传输的平衡,以及磷光材料的掺杂浓度,可以获得器件发光亮度、效率的提升。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.     

A stereo matching algorithm using multi-peak candidate matches and geometric constraints

Gray cross correlation matching technique is adopted to extract candidate matches with gray cross correla- tion coefficients less than some certain range of maximal correlation coefficient called multi-peak candidate matches. Multi-peak candidates are extracted corresponding to three closest feature points at first. The corresponding multi-peak candidate matches are used to construct the model polygon. Correspondence is determined based on the local geometric relations between the three feature points and the multi-peak candidates. The disparity test and the global consistency checkout are applied to eliminate the remaining ambiguous matches that are not removed by the local geometric relational test. Experimental results show that the proposed algorithm is feasible and accurate.     

Fiber Modal Index Measurements Based on Fiber Gratings

A novel method based on fiber gratings for measuring the effective indices of fiber modes is proposed. The effective index difference between the core mode and a cladding mode was obtained by analyzing the interference fringe of a pair of cascaded long-period fiber gratings. In order to extract the core mode index from the measured index difference, an index matching oil immersion method is proposed. By analyzing the interaction between the cladding mode and the oil applied on the cladding surface, the mode order and the effective index of the involved cladding mode might be calculated. Experimental results about the interference fringe shifts induced by the oil index and the oil-applied length are also presented.     

Optical Pulse Compression Schemes That Use Nonlinear Bragg Gratings

Nonlinear optical pulse compression of picosecond pulses typically requires long lengths of optical fiber and multiple components. Periodic structures, such as fiber Bragg gratings, are highly dispersive at wavelengths outside of the photonic bandgap. This implies that such gratings can be used as very short all-fiber compressors. In this paper a number of such compression schemes are reviewed involving uniform and nonuniform fiber Bragg gratings, relying on both soliton and nonsoliton compression principles. Experimental results supporting the corresponding underlying theory are also presented. Finally, an extension of one of the compression schemes is shown, which allows the generation of adjustable high-repetition rate soliton trains.