中空纳米二氧化硅复合微球的制备及其对蛋白的亲和分离

利用水热法合成了中空巯基纳米二氧化硅微球(SiO₂-SH), 然后在其表面修饰亚氨基二乙酸基团(-IDA), 形成了中空SiO₂-SH/IDA双功能化纳米微球。利用该纳米微球表面的-SH和-IDA双功能团, 可以更多的吸附溶液中的Ni²⁺, 形成SiO₂-SH/IDA-Ni²⁺复合微球从而可以更好的分离以六聚组氨酸为标签的(His-tagged)蛋白。结果显示制备的样品对分离His-tagged蛋白具有广谱性, 并且具有较好的再生能力。     

中空纳米二氧化硅复合微球的制备及其对蛋白的亲和分离

利用水热法合成了中空巯基纳米二氧化硅微球(SiO₂-SH), 然后在其表面修饰亚氨基二乙酸基团(-IDA), 形成了中空SiO₂-SH/IDA双功能化纳米微球。利用该纳米微球表面的-SH和-IDA双功能团, 可以更多的吸附溶液中的Ni²⁺, 形成SiO₂-SH/IDA-Ni²⁺复合微球从而可以更好的分离以六聚组氨酸为标签的(His-tagged)蛋白。结果显示制备的样品对分离His-tagged蛋白具有广谱性, 并且具有较好的再生能力。     

二氧化硅复合微球的制备及其对His-tagged融合蛋白质的分离

采用水热法合成了巯基纳米二氧化硅(SiO2-SH),并在其表面修饰亚氨基二乙酸基团(-IDA)得到SiO2-SH/IDA微球.该微球从溶液中可吸附更多的Ni 2+形成SiO2-SH/IDA-Ni 2+复合微球.研究结果表明,利用该复合微球可以较好地分离以组氨酸为标签(His-tagged)的融合蛋白.     

巯基功能化磁性微球的构建及其对蛋白质的亲和分离

通过水热法一步合成了纳米Fe3O4微球,并在甲苯中用巯基丙基三甲氧基硅烷(MPS)对其进行表面修饰得到了Fe3O4-SH微球,通过DTNB法测得微球表面巯基含量为333.54μg/mg.该纳米微球可以吸附溶液中的Ni2+,从而形成Fe3O4-SH-Ni2+复合材料.以此复合材料为载体,可以将以组氨酸为标签的(His-tagged)融合蛋白直接从细胞裂解液中进行提纯,并在外加磁场的作用下实现对目标蛋白的快速分离,其对His-tagged TRX蛋白的分离能力为20.6μg/mg,特别适合于对以组氨酸为标签蛋白的分离纯化.     

纳米SiO_2亲和吸附剂的制备及性能

采用水热法一步合成了巯基纳米二氧化硅(SiO_2-SH),随后在其表面修饰亚氨基二乙酸基团(-IDA)得到了SiO_2-SH/IDA,利用-SH和-IDA双官能团更多的吸附溶液中的Ni~(2+),从而得到SiO_2-SH/IDA-Ni~(2+)纳米亲和吸附剂.制备的亲和吸附剂可直接用于六聚组氨酸为标签的(His-tagged)融合蛋白的分离纯化.利用TEM、FT-IR、TG、SDS-PAGE等大型仪器表征了样品的形貌、结构及亲和分离能力.结果表明制备的SiO_2-SH/IDANi~(2+)纳米亲和吸附剂平均粒径为60nm,对His-tagged蛋白具有较好的特异性和较低的检测限(约为1.9×10~(-5)mol/L),且该吸附剂再生能力较强,再生3次后对目标蛋白仍具有较好的分离效果.     

细乳液法制备聚硅氧烷-Ag纳米复合微球及其抗菌性

首先以苯乙烯(St)及3-甲基丙烯酰氧基三甲氧基硅烷(MPS)为反应单体,通过细乳液聚合制备表面功能化聚硅氧烷微球,然后利用该微球表面的硅羟基及硅氧烷基团对Ag+的吸附及还原作用原位制备聚硅氧烷-Ag纳米复合微球。采用透射电镜(TEM)、紫外(UV-Vis)、热重分析(TG)及X射线衍射(XRD)等对聚硅氧烷-Ag纳米复合微球的形貌和组成进行了表征。研究表明:改变MPS和硝酸银的用量可调控聚硅氧烷-Ag纳米复合微球的形貌及表面银含量;抗菌实验结果表明,聚硅氧烷-Ag纳米复合微球具有较好的抑菌性。     

基于金/巯基相互作用的功能分子在磁性高分子复合微球表面可控组装研究

建立了一种基于金纳米粒子与巯基相互作用的在磁性高分子复合微球表面高效组装功能分子的新方法.首先制备了粒径均一的介孔磁性纳米粒子簇(MSP),利用蒸馏沉淀技术在MSP上包覆一层―S―S―键交联的聚甲基丙烯酸壳层(P(MAA-Cy)),并将直径10~30 nm的金纳米粒子沉积在MSP@P(MAACy)复合微球表面,从而获得MSP@P(MAA-Cy)-Au NP复合微球.调控HAu Cl4的投料量可以控制金纳米粒子沉积数量和尺寸.利用金粒子和巯基之间的强相互作用,将巯基修饰的荧光分子快速可控组装在MSP@P(MAA-Cy)-Au NP微球上.作为模型示范,实现了一次在MSP@P(MAA-Cy)-Au NP微球上快速固定单种或多种功能分子,为即时、高效、定量在功能微球(靶向药物载体等)上修饰功能分子提供了一种可选择的解决方案.     

pH值调节方式对LAB辅助合成纳米Cu2O微球的影响与组装机理

以Cu(Ac)2为原料,两性表面活性剂月桂酰胺丙基甜菜碱(LAB)为模板,采用两种不同的调节pH值方式制备了Cu_2O纳米材料。表征结果表明两种调节pH值方式均可获得Cu_2O纳米微球,并都呈立方晶相,而且样品的红外吸收峰、固体紫外吸收峰都不同程度的发生了蓝移;第一种Cu_2O纳米微球由针状纳米粒子积聚而成,针状纳米粒子间空隙孔径主要分布在25~50 nm之间,比表面积为22 m~2·g~(-1),禁带宽度为2.15 eV;第二种Cu_2O纳米微球由小的纳米球状体堆积而成,球状体间孔道直径集中在25~50 nm和50~125 nm两个区域,比表面积为9 m~2·g~(-1),禁带宽度为2.46 eV。两种不同的调节pH值方式获得的Cu_2O纳米微球,其反应历程和自组装机理存在不同。     

二硫键修饰的介孔二氧化硅微球的制备与表征

以一步法合成了巯丙基功能化的介孔二氧化硅微球, 微球的粒径在130～150 nm左右, 平均孔径为2.79 nm. 以所合成的微球为载体, 在其内、外表面修饰二硫键后, 在二硫键的另一端接枝了异硫氰酸荧光素(FITC), 并以FITC为标记物研究了二硫键在谷胱甘肽溶液中的断键情况. 实验结果表明, 微球上的二硫键具有在磷酸盐缓冲溶液(PBS, pH＝7.4)中稳定存在, 而在一定浓度的谷胱甘肽溶液中却能发生断键反应. 以高分辨透射电镜(HR-TEM)、N₂吸附-脱附实验表征了介孔二氧化硅微球的表面及孔道情况, 用Zeta电位分析、元素分析、热失重分析(TGA)等手段表征了微球上二硫键的接枝情况, 用荧光光度计(FLS)及紫外-可见分光光度计(UV-Vis)研究了谷胱甘肽对二硫键的断键情况的影响.     

免疫磁性纳米微球的制备与表征

成功制备了Fe3O4磁性纳米颗粒及二甲基丙烯酸乙二醇酯-甲基丙烯酸(EGDMA-MAA)共聚物包覆的Fe3O4磁性复合微球。将吲哚美辛抗体固定在复合微球表面,形成了Fe3O4(核)/聚合物-抗体(壳)的复合免疫磁性颗粒。XRD结果表明,制备的Fe3O4的晶型为反立方尖晶石型且纯度较高;TEM表征表明Fe3O4粒径较为均匀,平均粒径为12nm;磁性复合微球的平均直径为460nm。制备的Fe3O4磁性纳米颗粒和磁性复合微球有较强的磁响应强度,其饱和磁化率分别为49.16和8.38emu/g,能够满足磁性分离的要求。FT IR验证了磁性复合微球中羧基特征峰的存在,表明羧基成功连接在磁性微球上面。通过碳二亚胺/N-羟基琥珀酰亚胺(EDC/NHS)活化法将微球表面羧基活化并成功与抗吲哚美辛抗体交联。     

A Simple Approach to Fabricate CdS-SiO2 Hybrid Microspheres by Producing CdS Nanoparticles on the Surface of Thiolated SiO2 Microspheres

IntroductionSemiconductor nanoparticles show a quantum sizeeffect and have attracted much attention because oftheir unique photochemical and photophysical proper-ties[1—4].In recent years,quantumdots of CdS and in-organic nanoparticles hybrid composites …     

Silica/poly (N‐vinylimidazolium) nanospheres by combined RAFT polymerization and thiol‐ene click chemistry

We report a facile method that combined sol–gel reaction, reversible addition–fragmentation chain transfer (RAFT)/macromolecular design via interchange of the xanthates process and thiol‐ene click reaction to prepare monodisperse silica core‐poly(N‐vinylimidazole) (PVim) shell microspheres of 200 nm in average diameters. First, silica with C = C double bonds was prepared by the sol–gel reaction of 3‐(trimethoxysilyl)propyl methacrylates (MPS) with tetraethoxysilane in ethanol; SiO₂@PVim were subsequently prepared by grafting PVim chain (Mn = 9800 g/mol, polydispersity index = 1.22) to MPS‐SiO₂ via the thiol‐ene click chemisty. The obtained SiO₂@PVim microspheres show higher catalytic activity toward the hydrolysis of p‐nitrophenyl acetate compared with the PVim homopolymers. The as‐prepared composites have been characterized by scanning electron microscopy, transmission electron microscopy, thermal gravimetric analysis and Fourier transform infrared spectrometry analysis. Copyright © 2014 John Wiley & Sons, Ltd.     

Reparation of silica/poly(methacrylic acid)/poly(divinylbenzene-co-methacrylic acid) tri-layer microspheres and the corresponding hollow polymer microspheres with movable silica core

 Hollow poly(divinylbenzene-co-methacrylic acid) (P(DVB-co-MAA)) microspheres were prepared by the selective dissolution of the non-crosslinked poly(methacrylic acid) (PMAA) mid-layer in ethanol from the corresponding silica/PMAA/P(DVB-co-MAA) tri-layer hybrid microspheres, which were afforded by a three-stage reaction. Silica/PMAA core-shell hybrid microspheres were prepared by the second-stage distillation polymerization of methacrylic acid (MAA) via the capture of the oligomers and monomers with the aid of the vinyl groups on the surface of 3-(methacryloxy)propyl trimethoxysilane (MPS)-modified silica core, which was prepared by the Stöber hydrolysis as the first stage reaction. The tri-layer hybrid microspheres were synthesized by the third-stage distillation precipitation copolymerization of functional MAA monomer and divinylbenzene (DVB) crosslinker in presence of silica/PMAA particles as seeds, in which the efficient hydrogen-bonding interaction between the carboxylic acid groups played as a driving force for the construction of monodisperse hybrid microspheres with tri-layer structure. The morphology and the structure of silica core, silica/PMAA core-shell particles, the tri-layer hybrid microspheres and the corresponding hollow polymer microspheres with movable silica cores were characterized by transmission electron microscopy (TEM), Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy (XPS).     

Hydrophilic dual‐responsive magnetite/PMAA core/shell microspheres with high magnetic susceptibility and ph sensitivity via distillation‐precipitation polymerization

A facile and effective approach to preparation of dual‐responsive magnetic core/shell composite microspheres is reported. The magnetite(Fe₃O₄)/poly(methacrylic acid) (PMAA) composite microspheres were synthesized through encapsulating γ‐methacryloxypropyltrimethoxysilane (MPS)‐modified magnetite colloid nanocrystal clusters (MCNCs) with crosslinked PMAA shell. First, the 200‐nm‐sized MCNCs were fabricated through solvothermal reaction, and then the MCNCs were modified with MPS to form active vinyl groups on the surface of MCNCs, and finally, a pH‐responsive shell of PMAA was coated onto the surface of MCNCs by distillation‐precipitation polymerization. The transmission electron microscopy (TEM) and vibrating sample magnetometer characterization showed that the obtained composite microspheres had well‐defined core/shell structure and high saturation magnetization value (35 emu/g). The experimental results indicated that the thickness and degree of crosslinking of PMAA shell could be well‐controlled. The pH‐induced change in size exhibited by the core/shell microspheres reflected the PMAA shell contained large amount of carboxyl groups. The carboxyl groups and high saturation magnetization make these microspheres have a great potential in biomolecule separation and drug carriers. Moreover, we also demonstrated that other magnetic polymeric microspheres, such as Fe₃O₄/PAA, Fe₃O₄/PAM, and Fe₃O₄/PNIPAM, could be synthesized by this approach. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Silicon dioxide hollow microspheres with porous composite structure: synthesis and characterization

In this paper, a strategy for hollow porous silica microspheres with ideally flower structure is presented. SiO(2)/PAM hybrid composite microspheres with porous were synthesized by the reaction that the porous polyacrylamide (PAM) micro-gels immersed in tetraethoxysilane (TEOS) anhydrous alcohol solution and water in a moist atmosphere, with ammonium hydroxide as a catalyst. The SiO(2) hollow microspheres with porous were obtained after calcination of the composite microspheres at 550 °C for 4 h. The morphology, composition, and crystalline structure of the microspheres were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermo-gravimetric analysis (TGA), Fourier transform infrared spectroscopy (FI-IR), and X-ray diffraction (XRD), N(2) absorption analysis, respectively. The results indicated that the obtained hollow porous SiO(2) microspheres were a perfect flower structure.     

Magnesium oxide microspheres as a packing material for the separation of basic compounds in normal-phase liquid chromatography

Uniform monodisperse magnesium oxide microspheres with a high surface area have been prepared by a facile seed-induced precipitation. By characterizing these particles with scanning electron microscopy and N(2) physisorption techniques, the results demonstrate that these magnesium oxide microspheres have an average particle diameter of 9.5 microm, a specific surface area of 211.7 m(2)g(-1), a total pore volume of 0.76 mL g(-1), and an average pore diameter of 143 A. The chromatographic properties of these microspheres have been investigated in normal-phase mode for the separation of various basic compounds including aniline, quinoline, and pyridine derivatives. In contrast to conventional silica, the magnesium oxide particles exhibit unique selectivity and retention property for the separation of the tested basic compounds, and these microspheres are promising as an alternative new packing material for high-performance liquid chromatography.     

简单方法制备羟基磷灰石中空微球

无需添加任何有机物和金属离子, 以易得的中空球形碳酸钙(CaCO3)与磷酸氢二钠(Na2HPO4)作为反应物在常压下制备出羟基磷灰石中空微球. 通过场发射扫描电子显微镜(FESEM)、扫描电子显微镜(SEM), X射线粉末衍射(XRD)等手段对制备的羟基磷灰石中空微球的结构、组成和形貌进行了表征, 考察了不同反应温度对中空球形貌的影响. 实验结果表明, 所制备的羟基磷灰石微球是由短针状的纳米粒子组成的, 直径为2-4 μm. 对反应机理进行了初步探讨.     

Facile fabrication of anatase TiO2 microspheres on solid substrates and surface crystal facet transformation from {001} to {101}

Anatase TiO(2) microspheres with controlled surface morphologies and exposed crystal facets were directly synthesized on metal titanium foil substrates by means of a facile, one-pot hydrothermal method without use of any templating reagent. The obtained products were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelecron spectroscopy (XPS), and the focused ion beam (FIB) technique. The sizes of the resultant microspheres ranged from 1.1 to 2.1 μm. The transformation of anatase TiO(2) microspheres with exposed {001} facets surface to nanosheets surface with {101} facets was achieved by simply controlling the hydrothermal reaction time. The anatase TiO(2) microspheres with exposed square-shaped plane {001} facets were obtained by controlling the reaction time at 1 h. The prolonged reaction time transforms the anatase TiO(2) microspheres with exposed square-shaped plane {001} facets to eroded {001} facets then to a nanosheet surface with exposed {101} facets. With hydrothermal synthesis, the surface morphological structure and crystal facets formation are highly dependent on dissolution/deposition processes, which can be strongly influenced by attributes, such as pH of the reaction media, the total concentration of dissolved and suspended titanium species, and the concentration of fluoride in the reaction solution. The changes of these attributes during the hydrothermal process were therefore measured and used to illustrate the morphology and crystal-facet transformation processes of anatase TiO(2) microspheres. The surface morphologies and crystal-facet transformations during hydrothermal processes were found to be governed by the compositional changes of the reaction media, driven by dynamically shifted dissolution/deposition equilibria. The photocatalytic activities of the photoanodes made of anatase TiO(2) microspheres were evaluated. The experimental results demonstrated that the photocatalytic activity of anatase TiO(2) microspheres with exposed {001} facets was found to be 1.5 times higher than that of the anatase TiO(2) microspheres with exposed {101} facets.     

谷胱甘肽修饰的SiO2@Au核壳填料的制备及其作为毛细管液相色谱和加压电色谱固定相的性能评价

利用醛基和氨基之间的席夫碱反应在SiO₂微球表面引入聚合物分子聚乙烯亚胺(polyethyleneimine, PEI),以提高微球表面的氨基含量;然后利用自组装-化学镀法制备了SiO₂@Au核壳填料,并对制备过程中反应溶液的pH值和甲醛用量进行了优化。场发射扫描电子显微镜表征结果显示,经过条件优化后制备的SiO₂@Au核壳颗粒的表面Au包覆量较高,且包覆均匀、分散性较好。最后将谷胱甘肽(glutathione, GSH)分子修饰在SiO₂@Au表面,条件优化后成功地制备了一种新型的两性离子型亲水色谱材料SiO₂@Au-GSH,并将该填料填入毛细管中,制备了SiO₂@Au-GSH两性离子型毛细管亲水色谱柱,并在毛细管液相色谱和加压毛细管电色谱系统中考察了色谱柱的亲水性能,研究证明SiO₂@Au-GSH毛细管柱具有较好的分离能力和亲水性质。     

Pd/PdO纳米复合微球的合成及催化性能

采用甲基丙烯酸锌加速还原氯化钯(PdCl₂) 溶液中的钯离子(Pd ²⁺)为钯(Pd) 纳米微球, 进而用得到的钯纳米微球直接制备钯/氧化钯(Pd/PdO) 纳米复合微球. 通过扫描电子显微镜(SEM)、 透射电子显微镜(TEM)、 粉末X射线衍射分析(XRD)及X射线光电子能谱分析(XPS) 等方法对 Pd/PdO 纳米复合微球进行表征, 结果表明, 制备的纳米复合微球为表面粗糙、 大小均一的纳米微球. 采用紫外-可见吸收光谱(UV-Vis) 等方法考察了 Pd/PdO 纳米复合微球在对硝基苯酚(4-NTP) 还原反应中的催化性能, 发现其具有良好的催化活性和循环稳定性.