单分散功能化聚硅氧烷微球的制备及其应用

采用悬浮聚合法以正硅酸乙酯(TEOS)和γ-甲基丙烯酰氧基丙基三甲氧基硅烷(MPS)为主要原材料,制备表面功能化的单分散聚硅氧烷微球。采用扫描电镜(SEM)、动态光散射(DLS)和红外光谱(FT-IR)等分析手段分别对功能性微球的微观形貌、粒径分布和微观结构进行表征。将这种表面功能性的单分散聚硅氧烷微球按照0.4%的添加量加入光学级聚碳酸酯(PC)树脂中,可制备出透光率75.6%、雾度94.6%性能优良的光散射材料。     

生物功能化纳米SiO2 微球的构建及对谷胱甘肽S-转移酶的捕获分离

采用巯基丙基三甲氧基硅烷(MPS)一步水解法制备了表面带有巯基(-SH)的纳米SiO2微球(nSiO2-SH), 探讨了水/醇体积比、 反应温度、 MPS初始浓度及反应时间对nSiO2-SH微球形貌的影响, 并分析了反应机理. 制备的nSiO2-SH微球进一步与还原型谷胱甘肽(GSH)中的-SH反应生成双硫键(-S-S-), 在微球表面键合上GSH分子, 得到了生物功能化的纳米nSiO2-GSH微球. 通过扫描电子显微(SEM)、 透射电子显微镜(TEM)、 傅里叶变换红外光谱(FTIR)和热重分析仪(TG)对样品的表面形貌、 尺寸和组成等进行了表征. 利用十二烷基磺酸钠-聚丙烯酰胺凝胶电泳法(SDS-PAGE)检测样品对谷胱甘肽S-转移酶(GST)的分离效果, 结果表明, nSiO2-GSH微球能从混合蛋白中特异性吸附GST, 达到了分离GST的目的.     

单分散聚苯乙烯微球的表面皱纹化

首先制备了不同粒径的未交联的单分散聚苯乙烯(PS)微球;而后通过离子溅射技术在PS微球表面沉积了一层均匀光滑的铂(Pt)壳层,得到了PS-Pt核壳结构的复合微球;最后借用溶剂溶胀法诱导微球表面起皱的发生,从而制备了表面带有皱纹微结构形貌的PS微球.系统考察了微球表面Pt层厚度(t)、微球粒径(D)、溶剂组成(即溶胀度)等因素对球面起皱和皱纹形貌的影响,获得了球面皱纹周期与Pt层厚度的指数关系;结合理论分析了其起皱行为,实验结果与理论分析相吻合.此外,将表面起皱与表面等离子体刻蚀技术相结合,实现了表面带有纳米点状凸起与皱纹复合微结构形貌的PS微球的可控制备.     

草莓型PMMA/SiO_2有机-无机复合微球的合成与表征

在纳米二氧化硅水分散介质中,借助于正离子单体甲基丙烯酰氧乙基三甲基氯化铵(MTC)与未改性纳米二氧化硅颗粒之间的电荷作用,通过MTC与甲基丙烯酸甲酯(MMA)的自由基共聚合,制备了草莓型的PMMA/SiO2复合微球.整个制备反应过程中,纳米二氧化硅无需表面处理,体系中无需另外加入乳化剂或助乳化剂,微球表面吸附的纳米二氧化硅对颗粒起稳定作用.详细讨论了纳米二氧化硅初始添加量、MTC浓度对复合微球的平均粒径、复合微球中二氧化硅含量及微球形态的影响.动态光散射粒度分布仪(DLS)测得复合微球粒径在180~300 nm之间,热重分析(TGA)表明复合微球中二氧化硅含量介于16.4%~40.8%之间.透射电镜(TEM)显示所得复合微球具有草莓型结构,二氧化硅于表面富集.     

碳纳米管/壳聚糖复合微球的原位仿生矿化及表征

对碳纳米管(CNTs)进行酸化处理, 采用乳化交联法制备CNTs/壳聚糖(CS)复合微球, 在其表面诱导羟基磷灰石仿生合成, 研究了CNTs对复合微球仿生矿化的影响, 并与纯CS微球的仿生矿化进行了对比. 利用扫描电子显微镜(SEM)、 X射线衍射仪(XRD)、 溶胀率和含水率测试等考察了复合微球矿化前后的形貌特征、 物相结构及稳定性. 结果表明, 在相同时间下, CNTs/CS复合微球表面纳米羟基磷灰石的形成能力明显优于纯CS微球, 且形态稳定性更高. 细胞实验结果表明, 与MG63细胞共培养7 d时, 矿化复合微球细胞增殖明显.     

Pd/PdO纳米复合微球的合成及催化性能

采用甲基丙烯酸锌加速还原氯化钯(PdCl₂) 溶液中的钯离子(Pd ²⁺)为钯(Pd) 纳米微球, 进而用得到的钯纳米微球直接制备钯/氧化钯(Pd/PdO) 纳米复合微球. 通过扫描电子显微镜(SEM)、 透射电子显微镜(TEM)、 粉末X射线衍射分析(XRD)及X射线光电子能谱分析(XPS) 等方法对 Pd/PdO 纳米复合微球进行表征, 结果表明, 制备的纳米复合微球为表面粗糙、 大小均一的纳米微球. 采用紫外-可见吸收光谱(UV-Vis) 等方法考察了 Pd/PdO 纳米复合微球在对硝基苯酚(4-NTP) 还原反应中的催化性能, 发现其具有良好的催化活性和循环稳定性.     

纳米金/银修饰的空心/杂化微球的制备及其作为综合性能优异的三维拉曼增强基底的研究

以带正电的聚苯乙烯(PS)微球为模板分别制备出表面层为二氧化硅的杂化微球(PS@Si O2)及空心二氧化硅微球(HSSi,hollow spheres of Si O2).利用巯基硅烷偶联剂的桥联作用将金或银纳米粒子修饰到二氧化硅壳层的外表面,制备出4种结构均匀、体积窄分布的复合粒子:(1)纳米金修饰在空心二氧化硅微球的外表面(HSSi-Au NPs);(2)纳米金修饰在实心的PS/二氧化硅杂化微球(PS为核、二氧化硅为壳层)的外表面(PS@Si O2-Au NPs);(3)纳米银修饰在空心二氧化硅微球的外表面(HSSi-Ag NPs)以及(4)纳米银修饰在实心的PS/二氧化硅杂化微球的外表面(PS@Si O2-Ag NPs).分别利用上述4种复合粒子作为拉曼增强(SERS)基底,并以结晶紫(CV)为探针分子对各基底的拉曼增强效果进行了研究,其CV检测限依次为10-10、10-9、10-11和10-11mol/L,均具有较高的灵敏度.结果表明,以空心二氧化硅微球作为载体的增强效果优于以实心的杂化微球作为载体的增强效果(HSSi-Au NPs对CV的检测限比PS@Si O2-Au NPs对CV的检测限低1个数量级;虽然HSSi-Ag NPs和PS@Si O2-Ag NPs对CV的检测限相同,但对于相同浓度的CV,前者所获得的信号要明显强于后者).多次随机的重复测试表明,上述4种基底均具有优良的重复性.将上述4种基底在实验室放置3个月后用于CV的检测,各个基底仍具有相近的拉曼增强效果,即上述4种SERS基底的稳定性良好.     

新颖表面结构的脲醛树脂-聚丙烯酰胺复合微球的制备研究

将高分子微凝胶模板法应用于制备脲醛树脂[Urea-formaldehyde resin (UF Resin)]-聚丙烯酰胺[Polyacrylamide (PAM)]有机-有机复合微球材料. 以PAM高分子微凝胶为模板, 通过控制甲醛和尿素的缩聚反应在反相悬浮体系中进行, 制备得到了具有新颖表面形貌的脲醛树脂-聚丙烯酰胺[UF Resin/PAM]有机-有机复合微球, 利用扫描电子显微镜(SEM)、热重分析(TGA)、红外(FT-IR)等手段对复合微球进行了表征. 实验结果表明, 复合微球的表面形貌与甲醛和尿素溶液的pH值、甲醛和尿素溶液的浓度、甲醛和尿素的摩尔比、模板的组成等因素有关. 可以预期, 本研究方法将为制备具有特异表面形貌的有机-有机复合微球材料提供了一条有效的途径.     

锂离子电池用α-Fe2O3-Ag复合纳米棒负极材料的制备及储锂性能

采用FeOOH纳米棒为前驱体,通过层层自组装法及随后的热处理过程制备出α-Fe2O3-Ag复合纳米棒.采用透射电子显微镜(TEM)、高分辨透射电子显微镜(HRTEM)和电化学性能测试对样品的形貌、结构及电化学性能进行了表征.结果表明,Ag纳米颗粒均匀地分布在α-Fe2O3纳米棒的表面.作为锂离子电池负极材料,α-Fe2O3-Ag复合纳米棒表现出了较好的循环性能和较高的比容量.180个循环后,其比容量高达549.8 mA.h/g.     

锂离子电池负极材料纳米多孔硅/石墨/碳复合微球的制备与性能

以硅藻土为原料, 通过镁热还原反应得到多孔硅, 进一步利用砂磨得到纳米多孔硅, 然后通过球磨将其与片状石墨和沥青均匀混合, 采用喷雾干燥技术造粒, 高温煅烧后制备了纳米多孔硅/石墨/碳复合微球. 对所得复合微球的结构和理化性质进行了表征. 纳米多孔硅/石墨/碳复合微球作为锂离子电池负极材料展示出较高的可逆容量、 优异的循环稳定性(100次循环后容量仍为790 mA·h/g, 容量保持率可达96.7%)及较好的倍率性能.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.