A comparison of an optimised sequential extraction procedure and dilute acid leaching of elements in anoxic sediments, including the effects of oxidation on sediment metal partitioning

The effect of oxidation of anoxic sediment upon the extraction of 13 elements (Cd, Sn, Sb, Pb, Al, Cr, Mn, Fe, Co, Ni, Cu, Zn, As) using the optimised Community Bureau of Reference of the European Commission (BCR) sequential extraction procedure and a dilute acid partial extraction procedure (4 h, 1 mol L⁻¹ HCl) was investigated. Elements commonly associated with the sulfidic phase, Cd, Cu, Pb, Zn and Fe exhibited the most significant changes under the BCR sequential extraction procedure. Cd, Cu, Zn, and to a lesser extent Pb, were redistributed into the weak acid extractable fraction upon oxidation of the anoxic sediment and Fe was redistributed into the reducible fraction as expected, but an increase was also observed in the residual Fe. For the HCl partial extraction, sediments with moderate acid volatile sulfide (AVS) levels (1-100 μmol g⁻¹) showed no significant difference in element partitioning following oxidation, whilst sediments containing high AVS levels (>100 μmol g⁻¹) were significantly different with elevated concentrations of Cu and Sn noted in the partial extract following oxidation of the sediment. Comparison of the labile metals released using the BCR sequential extraction procedure (ΣSteps 1-3) to labile metals extracted using the dilute HCl partial extraction showed that no method was consistently more aggressive than the other, with the HCl partial extraction extracting more Sn and Sb from the anoxic sediment than the BCR procedure, whilst the BCR procedure extracted more Cr, Co, Cu and As than the HCl extraction.     

Comparative study of optimised BCR sequential extraction scheme and acid leaching of elements in the certified reference material NIST 2711

The optimised BCR sequential extraction procedure and a 4 h 1 mol L⁻¹ HCl partial extraction have been performed on the NIST 2711 reference material for a suite of 12 elements (Cd, Sb, Pb, Al, Cr, Mn, Fe, Co, Ni, Cu, Zn, As) using magnetic sector ICP-MS. A pseudo-total aqua regia digest of NIST 2711 has also been undertaken for quality assurance purposes, and comparison of the sum of the four BCR fractions, which included an aqua regia digest on the residue, with the pseudo-total aqua regia digest has been used to assess the accuracy of the BCR partitioning approach. As a result of this work, discrepancies between previous studies about BCR partitioning of elements in NIST 2711 have been discussed and an increase in confidence about the use of BCR partitioning scheme on seven elements (Cd, Pb, Al, Mn, Fe, Cu, Zn) in this standard material has been obtained. On the other hand, BCR partitioning for Sb, Cr, Co, Ni and As has been provided for the first time. Partial extraction results are also reported for the same 12 elements analysed by the optimised BCR procedure, with the partial extraction results exhibiting a strong correlation with the sum of the three labile steps of the BCR procedure.     

Distribution of Minor and Trace Metals in Carezza Lake (ANTARCTICA) Ecosystem

Abstract

This paper reports the distribution of a series of metals in natural samples collected at Carezza Lake in Antarctica, during the Italian Expedition in the austral summer 1989/90. The considered elements are: water, sediments and soil sampled from the surroundings of the lake and algae. The determination of the total concentration of the following metals was performed: Al, As, Ca, Cd, Co, Cr, Cu, Fe, Mg, Mn, Na, Ni, Pb, Zn. In addition, for sediment and soil samples, a speciation study was performed for some metals, namely Cd, Co, Cr, Cu, Fe, Mn, Ni, Zn, using the Tessier procedure.     

Assessment of trace metals contamination in estuarine sediments using a sequential extraction technique and principal component analysis

Fractionation of the metals Cd, Cr, Cu, Ni, Pb and Zn in sediments was performed for samples collected from eight locations in the Poxim river estuary of Sergipe State, northeast Brazil, using the 3-stage sequential extraction procedure proposed by the European Community Bureau of Reference (BCR). The extraction method was found to be satisfactory for analysis of certified reference material BCR-701, with recovery values ranging from 85% (Cu) to 117% (Cr). The detection limits obtained were 0.001 to 0.305 µg g^− 1. Zn exhibited greatest mobility and bioavailability, indicative of anthropogenic sources, while Cr was mainly found in the residual fraction and could be used as an indicator for the contribution from natural sources. Cd, Cu, Ni and Pb were associated with the oxidizable fraction, and Pb, Cr and Ni with the reducible fraction. Principal component analysis (PCA) clearly separated the metals into three groups: I (Zn); II (Pb); III (Cd, Cu, Cr and Ni). These groupings were mainly due to different distributions of the metals in the various fractions, in sediments from the different locations. Risk assessment code (RAC) analysis indicated that although the metals presented a moderate overall risk to the aquatic environment, nickel showed a low risk (RAC < 10%) at three sites, while zinc presented a high risk (RAC > 30%) at four other sites.     

The analysis of archaeological glass by inductively coupled plasma optical emission spectroscopy

Summary An analytical procedure is described for the analysis of archaeological glass by inductively coupled plasma optical emission spectroscopy (ICP-OES). Glass samples were analysed in solution after fusion with lithium metaborate at 1100°C. The analyses were performed in the sequential multielemental mode of operation, with the determination of 15 elements in four analytical runs; only elements with not too large concentration difference were analysed in a single run. The following elements were accounted for: Si, Na, Ca, Al, Fe, Mg, Mn, Ti, Sr, Ba, Cr, Ni, Cu, Co, Pb.     

Pure graphite as a reference material for the determination of trace elements — an interlaboratory collaborative study

Seven synthetic graphite powders of different grade of purity were analyzed by means of INAA, WDXRF, EDXRF, DC-OES directly and using ICP-MS, ICP-OES, ETAAS and FAAS in combination with various sample preparation techniques. On the basis of a statistical evaluation of the results obtained, for the trace elements Al, Ca, Cr, Cu, Fe, Mn and Ni, reference values were established and, for the elements As, Co, Mg, Mo, Pb, Sb, Si, Sr, Ti, V, Zn and Zr, informative values are given. The analyzed reference materials are commercially available.     

Ultrasound and microwave-assisted extraction of metals from sediment: a comparison with the BCR procedure

In this paper we investigate alternatives to mechanical stirring for the extraction of the mobile fraction of metals from sediment, and analyze whether these techniques can reduce extraction time and improve reproducibility. We compare the quantities of metal extracted from BCR601 and BCR701 certified sediments using ultrasound bath, microwave-assisted extraction and the first step in the certified BCR sequential extraction procedure. Some environmentally important not-certified metals such as As, Mn, Co, Fe and Al have been included in this study. In the case of microwave-assisted extraction, we compare tests in which samples are exposed to constant, low power irradiation with tests using pulsed high power.

In the tests using the ultrasound bath, less metal was extracted than with the other extractive techniques and standard deviations were comparable to those obtained with the BCR procedure; in assays using microwaves at constant power, extraction efficiencies were different for different metals and for different reference materials and, in some cases, standard deviations were higher than those for the reference method. In contrast, tests with microwaves and constant temperature produced encouraging results: R.S.D.s lay in the 2–4% range, both for certified and not-certified metals; these values are very low compared to those for the reference method. Extraction efficiencies for certified metals were close to 100% for Cd, Zn, Cu and Ni and around 80% for Pb and Cr.     

Extraction and exchange behavior of metal species in therapeutically applied peat

The binding and availability of metals (Al, Ca, Cd, Co, Cr, Cu, Fe, Mg, Mn, Ni, Pb, Zn) in therapeutically applied peat (Grosses Gifhorner Moor, Sassenburg/North Germany) was characterized by means of a versatile extraction approach. Aqueous extracts of peat were obtained by a standardized batch equilibrium procedure using high-purity water (pH 4.5 and 5.0), 0.01 mol l(-1) calcium chloride solution, 0.01 mol l(-1) ethylenediaminetetraacetic acid (EDTA) and 0.01 mol l(-1) diethylenetriamine pentaacetic acid (DTPA) solution as metal extractants. In addition, the availability of peat-bound metal species was kinetically studied by collecting aliquots of extracts after different periods of extraction time (5, 10, 15, 30, 60 and 120 min). Metal determinations were performed by atomic spectrometry methods (AAS, ICP-OES) and dissolved organic matter (DOM) was characterized by UV/Vis measurements at 254 and 436 nm, respectively. Of the extractants studied Ca, Mg and Mn were the most available metals, in contrast to peat-bound Fe and Al. The relative standard deviation s(r) of the developed extraction procedures was mostly in the range of 4 to 20%, depending on the metal and its concentration in peat. A pH increase favored the extraction of metals and DOM from peat revealing complex extraction kinetics. Moreover, a competitive exchange between peat-bound metal species and added Cu(II) ions showed that >100 mg of Cu(II) per 50 g wet peat was necessary to exchange the maximum of bound metals (e.g. 21.8% of Al, 3.9% of Fe, 79.0% of Mn, 81.9% of Sr, related to their total content).     

Inert sampling and sample preparation - the influence of oxygen on heavy metal mobility in river sediments

Two approaches have been used to investigate changes in the nature of metal binding in river sediments caused by atmospheric oxygen. Firstly, non-inert and inert sample preparation were applied, in combination with sequential extraction, to determine for which metals inert sample preparation is necessary for correct determination of metal mobility under environmental conditions. Secondly, the metal contents of sediments sampled before and after a river weir were fractionated by sequential extraction to study the effect of the oxygen impact at the weir on heavy metal mobility in the sediments. Different grain-size fractions from one sample were also extracted, to enable selection of the upper grain-size limit most suitable for answering this analytical question. The results showed the need for the inert sample preparation technique for Cd, Zn, Pb, Mn, and Fe, but not for Co, Ni, Cu, and Cr. No significant change of heavy metal mobility at the weir could be proved, although the mobilization behavior of some elements was different. The optimum upper grain-size limit was 63 microm.     

Pure graphite as a reference material for the determination of trace elements — an interlaboratory collaborative study

 Seven synthetic graphite powders of different grade of purity were analyzed by means of INAA, WDXRF, EDXRF, DC-OES directly and using ICP-MS, ICP-OES, ETAAS and FAAS in combination with various sample preparation techniques. On the basis of a statistical evaluation of the results obtained, for the trace elements Al, Ca, Cr, Cu, Fe, Mn and Ni, reference values were established and, for the elements As, Co, Mg, Mo, Pb, Sb, Si, Sr, Ti, V, Zn and Zr, informative values are given. The analyzed reference materials are commercially available. Received: 12 February 1996/Revised:27 March 1996/Accepted:2 April 1996     

Cold ultrasonic acid extraction of copper, lead and zinc from soil samples

A cold ultrasonic acid method for extracting Pb, Cu and Zn from soil samples has been studied. This work focused on studying the experimental condition for extrating trace metals from soil samples at ambient temperature (≈25 °C) using Syrian soil samples; the same conditions were applied to reference soil samples(SL-1, Soil-7, SDM, and BCR-32). A short exposure time (4 h), and 2 ml of concentrated hydrochloric acid were found to be best. Under the applied conditions Pb, Cu and Zn were quantitavely extracted, while Sr, Mn, Fe, Al, Cr, Co, and Ni were partialy extracted. The advantages of the cold ultrasonic extraction method are as follows: it is selective, it is matrix free, the extraction time is short, the amounts of consumed chemicals are small, the by-products of the process are negligible and it is environmentally clean, since no fume emissions are emitted. The only disadvantage is that it is not a real total digestion method. Comparable results for the proposed ultrasound method and the hot-plate acid digestion method for Cu, Pb and Zn in certified refrence soil samples(SL-1, SDM, Soil-7, BCR-32, Soil-6) and some Syrian soil samples are obtained.     

Determination of Trace Metals in Antarctic Sediments from Terra Nova Bay - Ross Sea

Abstract

Trace metals (Cu, Pb, Zn, Cd, Cr, Ni, Co, Mn) and iron concentration were determined in several sediments collected in the Antarctica (Terra Nova Bay—Ross Sea). Samples were analyzed by inductively coupled plasma (ICP-AES) after selective and total extraction. The results are in good agreement with the data previously collected in the same area.     

氧化与还原条件下伊通河长春区段沉积物重金属形态特征的对比研究

利用改进的Tessier连续萃取法研究了伊通河长春市自由大桥处不同深度沉积物样品在氧化及还原条件下Cu,Pb,Zn和Ni的形态变化规律,同时分析了沉积物样品中酸可挥发性硫(Acid volatile sulfide,AVS)和同时提取重金属(Simultaneous extract metals,SEM)的含量. 实验结果表明，样品经干燥、研磨处理后,Cu有机/硫化物结合态比例减少40%,锰氧化物结合态的比例显著增加; Pb,Zn和Ni 3种元素有机/硫化物结合态比例均略有下降,变化幅度小于Cu,并重新分配到不同的化学相中. 通过SEM中各金属含量与有机/硫化物结合态中金属含量的对比可知,还原性沉积物中Cu除了与硫化物结合外,很大一部分是以有机物形态存在的,Pb,Zn,Ni,Fe和Mn则主要以硫化物形态存在,各元素形态分析均不同程度地受到萃取剂的影响.     

Distribution and speciation of metals in surface sediments of Taranto [corrected] gulf (Ionian Sea, Southern Italy)

Concentrations of metals (Al, Fe, Ti, Ni, Mn, Cr, Zn, Cu, Pb) were determined in surface sediments from Taranto gulf (Ionian Sea, Southern Italy) in order to assess the distribution and the bioavailability of metals. Total metal content and speciation of Fe, Ni, Mn, Zn, Cu and Pb were determined. Sediment cores were also sampled in some stations of particular interest. The analytical results show that metals distribution does not show significant variations in relation to depth. Metal distribution in the Taranto gulf is mainly influenced by industrial wastes from Taranto town, by rivers of the Basilicata region and by prevailing anticlockwise marine currents. These factors cause an accumulation of metals in the sediments near to the coasts of Calabria. The statistical analysis, effected by HCA and PCA methods, can be considered a good starting point in order to classify sediment samples and to locate accumulation areas. Metal speciation shows that Fe, Ni and Zn are present in sediments mainly as sulphides, Mn is present principally in an ion-exchange form or bound to carbonate, while Cu and Pb are mainly present in the fraction bounds to humic acids.     

Trace elements in Variegated Bolete (Suillus variegatus) fungi

Metallic elements such as Ag, Al, Ba, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, Rb, Sr, and Zn were determined using ICP-OES in a representative set of fifteen fruiting bodies of the edible fungus Suillus variegatus. Fruiting bodies were collected from unpolluted areas near the village of Lubichowo of the Bory Tucholskie forest complex in northern Poland in 2007?C2008. The caps were richer in Ag, Al, Cd, Cr, Cu, Fe, K,Mg, Ni, Rb, and Zn, and the stipes in Ba, Ca, Mn, Na, Pb, and Sr. Cobalt concentration in the caps and stipes was similar. In the caps, the content of the elements decreased in the order (mg per kg of dry weight): K 29000 ± 3700, Fe 1600 ± 80, Mg 990 ± 110, Rb 320 ± 86, Zn 90 ± 19, Ca 75 ± 34, Al 68 ± 32, Na 40 ± 18, Cu 19 ± 7, Mn 13 ± 7, Cd 1.0 ± 0.5, Ni 0.64 ± 0.32, Ag 0.40 ± 0.20, Cr 0.33 ± 0.06, Pb 0.20 ± 0.17, Ba 0.19 ± 0.11, Sr 0.15 ± 0.09, and Co 0.070 ± 0.050. Apparently, S. variegatus collected from background areas are relatively low in Pb and Cd and so are suitable for human consumption.     

煎煮对几种特色南药中重金属元素含量和形态影响

考察了几种特色南药中重金属(Cd,Cr,Cu,Fe,Mn,Ni,Pb,Sr,Zn)的含量状况,并采用形态连续萃取法分析重金属在药材中的形态分布,研究了药材煎煮时药材中重金属的释放及煎煮过程对药材中重金属形态分布的影响。结果表明,几种南药中Cr,Pb,Zn的含量较高,且巴戟天中的重金属总量高于限量标准;原药材中Cr,Cu,Mn,Ni,Pb和Zn主要存在于有机态和残留态,Fe和Sr主要存在于残留态。煎煮使南药中大量重金属迁移到药汤中;药汤中Cu,Mn,Cr,Pb和Zn主要来自于其在药材中的可交换态、碳酸盐结合态和有机态,而药汤中Sr,Ni和Fe不仅包含其非残留态,更多来自于它们的残留态。为减少药汤中重金属,对于Cu,Mn,Cr,Pb和Zn既要控制在药材中的总量,且需降低它们在药材中的非残留态含量;对于Fe,Ni和Sr则主要是控制其在药材中的总量。     

Molybdenum(VI) Oxide-Modified Silica Gel as a Novel Sorbent for the Simultaneous Solid-Phase Extraction of Eight Metals with Determination by Flame Atomic Absorption Spectrometry

A silica-based inorganic sorbent was synthesized by the thermal decomposition of ammonium heptamolybdate on silica and applied for the preconcentration and simultaneous determination of Cd, Co, Cr, Cu, Fe, Mn, Ni, and Pb in river water samples using a column system with flame atomic absorption spectrometry. Attenuated total reflection-Fourier transformation infrared spectroscopy, scanning electron microscopy, and electron dispersive spectroscopy were used for sorbent characterization. The effects of pH, sample volume, eluent type, eluent concentration, eluent volume, sample flow rate, and matrix ions (Al, Bi, Ca, Mg, and Zn) on the recovery of the metals in model solutions were investigated. The adsorption capacities (µmol g^?1) of SiO₂-MoO₃ were 88.96 (Cd), 169.69 (Co), 153.85 (Cr), 188.88 (Cu), 179.05 (Fe), 163.81 (Mn), 136.31 (Ni), and 38.61 (Pb). The detection limits of the method were 9.09, 10.82, 10.77, 49.57, 31.64, 6.40, 8.86, 19.15?µg L^?1 for Cd, Co, Cr, Cu, Fe, Mn, Ni, and Pb, respectively, with a preconcentration factor of 25. The developed method was used for the determination of the target metals in real samples and the recoveries for spiked samples were found to be from 91.2% to 102.9%.     

A study of trace element contamination in river sediments in Serbia using microwave-assisted aqua regia digestion and multivariate statistical analysis

The aim of this study was the evaluation of the trace element contamination level in sediments of the most important rivers in Serbia and their tributaries. The determination of the aqua regia soluble contents of 12 micro- and macro-elements (Ca, Cd, Co, Cr, Cu, Fe, Mn, Pb, Ni, Zn, Be and V) in sediments was developed by the microwave digestion technique combined with inductively coupled plasma atomic emission spectrometry. Correlation analysis and principal component analysis distinguishes factors of lithogenic and anthropogenic origins. The Fe, Mn, Be and V contents are controlled by a regional lithogenic high background factor, while Cd, Cr, Pb, Ni, Zn and Cu are recognized as tracer of pollution. For Co, mixed sources from both lithogenic and anthropogenic inputs were evidenced.The investigated sediment of the major rivers and their tributaries in Serbia showed high concentrations of metals, especially of Cd, Pb, Cu and Zn, which may cause serious environmental impacts. Rivers which flow into the Danube from its entrance into Serbia significantly influence the chemical load of the water and sediments.The experimental study was conducted using two BCR standard reference materials. The calculated accuracy and precision confirmed the good performance of the adopted procedures.     

Chelate von β-dicarbonylverbindungen und ihren derivaten: Teil XXXVI. Die extraktionsphotometrische bestimmung von cadmium mit thiodibenzoylmethan im vergleich mit anderen spezialreagenzien

Thiodibenzoylmethane is a suitable reagent for the extraction and photometric determination of traces of cadmium. There is no interference from 10000-fold amounts of alkaline and alkaline earth metals, B, Al, Ga, In, Mn, Fe, Cr, and from 1000-fold amounts of As, Sb, Sn, Pb, Bi, Cu, Co, Ni, Pd; Ag, Hg, Tl and Zn are tolerated up to a 100-fold excess. The proposed method is compared with various other possibilities for cadmium determinations.