不锈钢表面Schiff碱自组装分子膜的制备及性能

以乙二胺和乙酰丙酮为原料,在盐酸催化下合成了新的Schiff 碱化合物,其收率为73.2%。 采用红外光谱和核磁共振谱对化合物的结构进行了表征。 并将其自组装在不锈钢基体表面,利用极化曲线、电化学阻抗谱和自腐蚀电位 时间曲线进行电化学分析。 结果表明,在1 mol/L HCl中,不锈钢表面自组装分子膜能快速有效的抑制异相电子的转移,促进不锈钢表面发生钝化,减少了不锈钢基体的腐蚀。 总结了Schiff碱自组装分子膜对金属防护的效用和价值。     

聚苯胺/聚吡咯-纳米二氧化硅复合薄膜的合成及防腐性能

采用循环伏安法(CV)在316不锈钢(316SS)表面聚合生成聚苯胺/聚吡咯-纳米二氧化硅(PAni/PPySiO_2)共聚复合薄膜.通过电化学工作站、傅里叶变换红外光谱仪(FTIR)、X射线光电子能谱仪(XPS)和扫描电子显微镜(SEM)等考察了聚苯胺(PAni)、聚苯胺/聚吡咯(PAni/PPy)与PAni/PPy-SiO_2薄膜的电化学聚合过程、分子结构和特征形貌;在3.5%(质量分数)Na Cl水溶液中利用Tafel极化曲线和电化学阻抗谱(EIS)分别考察了PAni,PAni/PPy与PAni/PPy-SiO_2薄膜对不锈钢的防腐性能.结果表明,通过电化学法可以在316不锈钢表面生成PAni/PPy-SiO_2共聚复合薄膜;相对于PAni薄膜与PAni/PPy薄膜,PAni/PPy-SiO_2薄膜有着更密实的表面结构,其对不锈钢的保护能力优于PAni/PPy薄膜和PAni薄膜,纳米SiO_2的掺杂通过加强膜层的机械屏蔽作用并抑制腐蚀反应过程中电荷的传递,提高了薄膜的防腐能力.     

AZ31镁合金表面聚吡咯的化学氧化合成及其耐蚀性能

以对甲苯磺酸钠为掺杂剂, 三氯化铁为氧化剂, 用化学氧化聚合法在AZ31 镁合金表面制备聚吡咯(PPy)膜. 采用傅里叶变换红外(FTIR)光谱分析了镁合金表面聚吡咯膜结构, 通过电化学极化曲线、电化学阻抗谱(EIS)研究了其耐蚀性能, 通过扫描电子显微镜(SEM)、X射线能量散射谱(EDS)分析了表面形貌和成分. 和镁合金裸样相比, 聚吡咯膜对镁合金腐蚀有一定的抑制作用. 硅烷预处理改善了镁合金/聚吡咯体系的耐腐蚀性能, 使腐蚀电位较镁合金裸样正移了110 mV, 电流密度减小了约2个数量级.     

固相法制备聚噻吩/聚吡咯/二氧化钛膜及电化学腐蚀性能

在水蒸气气氛下,制备出表面富含羟基的纳米Ti O_2颗粒,然后在室温和氧化剂三氯化铁存在下,通过化学固相氧化法,在不锈钢表面制备出聚噻吩/聚吡咯/Ti O2(PTH/PPy/TiO_2)薄膜。采用X射线衍射(XRD)、扫描电子显微镜(SEM)、傅里叶变换红外光谱(FT-IR)、热重分析(TG)、电化学阻抗(EIS)等技术手段对产物的微观形貌、热稳定性和耐腐蚀性能进行了研究,并讨论了不同纳米TiO_2含量对复合材料的结构和性能的影响。结果表明,在其使用温度(20~300℃)下,PTH/PPy/6%Ti O_2(质量分数)膜热分解温度为450℃,能够满足其使用要求。用PTH/PPy/TiO_2膜保护的不锈钢比裸露的不锈钢的自腐蚀电位高出0.8 V以上,而腐蚀电流密度降低了2个数量级。TiO_2的添加明显的提高了PTH/PPy材料的抑制腐蚀的能力,并且由于TiO_2的加入能够使聚合物与无机纳米粒子之间能够紧密地结合在一起,减少膜的缺陷,增大复合材料与金属基体的力学性能,使得膜结构更加的致密,从而减缓不锈钢的腐蚀。     

不同状态下聚吡咯膜的电化学阻抗

用恒电流法分别聚合了掺杂对甲苯磺酸根(pTS-)和十二烷基磺酸根(DS-)的聚吡咯膜(PPy/pTS和PPy/DS),通过循环伏安法(CV)和电化学阻抗法(EIS)测试了聚吡咯膜在NaCl溶液中‘过电位’电化学过程前后及不同电位下聚吡咯膜的电化学性能.同时,通过嵌入和脱出Na+和Cl-离子的聚吡咯膜在特定溶液中电化学阻抗图谱,研究了离子的嵌入对聚吡咯膜电化学性能的影响.结果表明‘过电位’现象可以提高聚吡咯膜的离子电导率和膜电容,Cl-离子的嵌入能提高PPy/pTS的电导率,而Na+离子的嵌入对聚吡咯膜的电导率影响不大.另外,嵌入离子对聚吡咯膜形貌的改变会对聚吡咯膜的离子传导率有一定影响,从而导致膜的电化学阻抗的变化.     

水介质中吡咯的电化学聚合反应

研究了扫描电位上限对循环伏安法制备聚吡咯膜性能的影响，吡咯在水溶液中于玻碳电极表面化学聚合的起始电位为0．58V，在聚吡咯（Ppy）修饰电极表面聚合的起始电位为0．55V，当聚合电位上限在0．80V以上时，Ppy的氧化还原反应可逆性变差，同时，氧化电位过高将导致Ppy膜导电性能下降；研究了聚合介质对循环伏安法制备导电聚吡咯膜的影响，实时观察了吡咯（Py）聚合过程溶液中质子含量的动态变化，发现Py聚合伴随有质掺杂←→释放过程；结合Ppy膜的元素分析、ESR分析和IR光谱分析，总结出了水介质中电化学聚合高导电性聚吡咯膜的条件。     

球壳TiO2-吡咯共聚膜的制备及吡虫啉测定

通过水热模板法制备壁厚约10 nm的TiO₂纳米球壳(HTNs),采用电化学法在0～0.6 V范围内与吡咯(Py)共聚修饰ITO电极,制备HTNs-PPy/ITO传感器。考察聚合缓冲液的pH对共聚膜硬度和电化学性能的影响,运用扫描电镜和透射电镜对HTNs和HTNs-PPy/ITO传感器表面进行表征。比较裸电极ITO、聚吡咯修饰电极(PPy/ITO)和HTNs-PPy/ITO电极对吡虫啉的测定效果。结果表明：HTNs降低吡咯聚合反应电位差约0.04 V,HTNs-PPy稳定性好且具有优异的电催化效果,吡虫啉在-1.3～0 V之间呈现出明显的氧化还原峰,吡虫啉浓度在0.5～100μmol/L范围内与峰电流呈良好的线性关系,检出限为0.15μmol/L。修饰电极用于西兰花表面农药残留吡虫啉的直接测定,加标回收率在95.7%～105.0%。     

9,10-蒽醌-2-磺酸钠盐掺杂对导电聚吡咯电容性能的促进作用

用恒电位法制成以9,10-蒽醌-2-磺酸钠盐(AQS)为掺杂阴离子的导电聚吡咯(PPy)电化学电容器电极材料,并采用循环伏安(CV)、充放电测试、电化学阻抗(EIS)等方法表征电容性质.结果表明,与高氯酸阴离子(ClO4-)掺杂的PPy相比,PPy/AQS电极材料不仅单位质量电容和电极稳定性得到提高,工作电压范围也得以扩大.在1mol·L-1的氯化钾中,工作电压为-0.6至0.6V,扫描速率为50mV·s-1时其单位质量电容达到491F·g-1,比PPy/ClO4-电极材料提高1.5倍.这是由于AQS自身良好的氧化还原活性和AQS掺杂有利于聚吡咯膜形成疏松多孔的纳米及亚微米颗粒结构而导致的.     

聚吡咯对Cu(II)的催化还原作用

以对甲苯磺酸钠为掺杂剂在不锈钢(SS)电极表面恒电位合成聚吡咯(PPy)修饰膜, 采用恒电位和动电位对Cu(II)的还原效果进行了研究, 并与不锈钢电极进行了对比. 结果表明, 由于聚吡咯的催化作用, 聚吡咯修饰电极对Cu(II)还原效率高于不锈钢电极; 聚吡咯膜对析氢有明显的抑制作用, 因此电流效率远远高于不锈钢电极, 这是采用聚吡咯进行电化学还原的明显优势. 通过在不同浓度Cu(II)酸性溶液中的循环伏安行为讨论了聚吡咯对Cu(II)的还原作用机理.     

超临界二氧化碳流体环境中导电聚吡咯复合材料的制备

以聚苯乙烯(PS)和锌盐中和的磺化聚苯乙烯(Zn-SPS)膜为基体, 在超临界二氧化碳(SC-CO₂)环境中用化学氧化法原位制备了聚吡咯(PPy)导电复合材料. 由于SC-CO₂对聚合物基体的强溶胀作用, 吡咯分子高效地扩散到基体内部进行聚合而形成导电通路, 得到比传统的水溶液法更高的电导率. 聚合物基体的性质对复合材料的导电性和形貌产生重要影响. 在相同条件下, Zn-SPS/PPy的电导率比PS/PPy高3~4个数量级, 而它们的体积逾渗阈值分别为2.7%和6.2%, 远远低于理论预测值(16%).     

Enhancing corrosion resistance of zinc-filled protective coatings using conductive polymers

Organic coatings containing zinc are amply used for the protection of metals, particularly steel structures. Ways to reduce the zinc content in the coating materials are sought for environmental and financial reasons. Our previous work (Kohl, Prog Org Coat 77:512–517, 2014; Kohl and Kalendová, Mater Sci Forum 818: 171–174, 2015a) suggested that one of the options consists in the use of conductive polymers in the formulation of the zinc coatings. The benefits of conductive polymers include nontoxicity, high stability, electric conductivity and redox potential. Previously we focussed on the effect of conductive polymers added to the organic coatings so as to complete the zinc volume concentration to 67%. The anticorrosion efficiency of the organic coatings was found to improve with increasing polyaniline phosphate or polypyrrole concentrations. Zinc content reduction in the system, however, did not attain more than 5%. The present work focusses on systems where the organic coatings are prepared with zinc having a pigment volume concentration PVC = 50%. Zinc content reduction in the system attains up to 20%. This work examines the mechanical and anticorrosion properties of the organic coatings with reduced zinc contents. The present work was devoted to the feasibility of using of conductive polymers in the formulation of coatings with reduced zinc contents. The conductive polymers included polyaniline, polypyrrole and poly(phenylenediamine); these were synthesised and characterised using physico-chemical methods. Polyphenylenediamine as a potential corrosion inhibitor has not been paid adequate attention so far. Subsequently, organic coatings with reduced zinc contents and containing the pigments at 0.5, 1 and 3% volume concentrations were formulated. The coatings were subjected to mechanical tests and accelerated corrosion tests to assess their mechanical and corrosion resistance. The corrosion resistance of the organic coatings was also studied by linear polarisation. The results of the mechanical tests, accelerated corrosion tests and linear polarisation measurements indicate that the organic coating properties get affected by the conductive polymer type as well as by the pigment volume concentration. The important finding is that the use of conductive polymers in coatings with reduced zinc contents was beneficial in all cases.     

纳米银修饰的超疏水界面用于农药的超灵敏检测

采用化学还原法,在具有不同微观结构的规整的不锈钢网和聚纤维素酯薄膜表面合成了银纳米颗粒.利用氟化试剂对复合界面进行处理,形成超疏水性能的界面,能有效地浓缩目标分子.以罗丹明6G(R 6G)为分析物,纳米银修饰聚纤维素酯薄膜为基底,采用表面增强拉曼散射(SERS)分析了氟化处理前后基底对目标分子的检测能力.实验结果表明,具有超疏水性能的复合基底对R 6G分子的检出限为1 ×10-16 mol/L.以纳米银修饰的不锈钢网和聚纤维素酯两种复合材料为基底,对常用杀虫剂敌百虫的检出限分别为1×10-15 mol/L和1×10-16 mol/L.     

改性316L不锈钢表面聚苯胺的制备及电化学性能

采用原位氧化技术调整316L不锈钢(SS316L)基体元素Cr和Ni在界面的浓度和分布, 形成了Ni和Cr富集改性界面. 应用计时电位技术, 通过Cr和Ni改性层催化草酸溶液中的苯胺单体在其表面吸附并聚合, 在SS316L表面沉积了附着力良好的聚苯胺(PANI)膜. 与SS316L相比, 表面富Ni-Cr的SS316L在涂覆PANI膜后, 在80 ℃ 0.5 mol/L H₂SO₄+5 mg/L F^-溶液中阳极和阴极的腐蚀电位分别提高470和500 mV, 维钝电流均下降2~3个数量级; 在模拟质子交换膜燃料电池运行环境中, 经36000 s恒电位极化, 其阳极和阴极的腐蚀电流分别下降约1和2个数量级, 腐蚀速度分别约为6~9 和< 5 μA/cm²; 在1.4 MPa压力下, 聚苯胺膜层与Toray 060碳纸间接触电阻下降约250 mΩ·cm². SS316L表面形成富Ni-Cr改性层并涂覆聚苯胺膜后, 其耐蚀性和导电性均明显优于原始SS316L, 这主要取决于富Ni-Cr改性层的结构、 组成和聚苯胺膜的厚度.     

多功能性聚吡咯复合膜

聚吡咯具有较高的电导率与良好的环境稳定性,被视为继聚苯胺之后最有工业化应用前景的导电高分子材料之一。聚吡咯与常规聚合物基体如聚乙烯醇、聚氯乙烯等形成的复合膜不仅可以综合聚吡咯奇异的多功能性与常规聚合物的易成膜性和低成本性于一体,而且可望发挥两者的协同效应,从而大大拓宽其应用领域。该研究已经成为导电聚合物研究领域中的又一新热点。作者系统论述了制备这类功能复合膜的两种典型制备方法,并在分析各自特点的基础上提出了改进与发展方向,指出聚吡咯复合膜具有广泛可调的电导率、快速的电学响应性以及稳定的电致变色性等多种功能,在透明导电膜、化学传感器、生物分离膜、电致变色膜领域具有诱人的应用前景。     

FTIR spectroscopic characterization of Nafion®–polyaniline composite films employed for the corrosion control of stainless steel

Nafion?–polyaniline (PAn) composite films deposited by a two-step process on a stainless steel (SS) substrate were characterized in this study using Fourier transform infrared (FTIR) spectroscopy under various conditions employed to evaluate their anticorrosion properties. The SS|Nafion? electrode was first prepared by placing a certain amount of Nafion? on the SS substrate, and then polymerization of aniline was carried out potentiodynamically on the SS|Nafion? electrode. The SS|Nafion?–PAn electrodes subjected to both potentiodynamic polarization and open-circuit conditions in sulfuric acid solutions without and with chlorides appeared to have distinct differences in their FTIR spectra. It is proposed that under the electrochemical conditions used in this study, the PAn is mostly formed inside the Nafion? membrane with a high proportion of oligomers influencing the ionic transport through the membrane. The inhibition of pitting corrosion arises primarily from the enhanced permselectivity of the composite film due to the Nafion? membrane that prevents chloride transport. An essential beneficial effect comes also from the PAn redox properties on the growth of the passive oxide film. Even under severe corrosion conditions, Nafion???/em>PAn films retain their redox activity and chemical stability, whereas the membrane crystallinity seems to be enhanced.     

氯霉素分子印迹复合膜的制备及电化学

采用电化学聚合法合成了对氯霉素（CAP）有快速响应和高灵敏度的聚苯胺/聚吡咯分子印迹复合膜修饰电极。 通过微分脉冲伏安法、扫描电子显微镜对制备的分子印迹复合膜的电化学性质及表面形貌进行了表征。 结果表明,以铁氰化钾为电化学探针,该膜对CAP的测定电化学信号响应快速、灵敏度高、选择性和膜再生性能良好。 对CAP检测的线性范围为5.00×10-8～1.05×10-6 mol/L,检测限为2.09×10-9 mol/L。     

TiO_2/316L不锈钢薄膜电极在NaCl溶液中的耐腐蚀性能

应用sol gel法和提拉技术于 316L不锈钢表面构筑纳米TiO2薄膜,再经水热后处理以消除膜中的细小龟裂.SEM和XRD技术表征膜的形貌和厚度,线性极化法分别考察膜厚度、pH、和Cl浓度对纳米膜电极耐腐蚀性能影响.电化学交流阻抗检测纳米TiO2膜在 0. 5mol/LNaCl溶液中的阻抗随浸泡时间的变化,光电子能谱技术测定了经浸泡 1008h后的纳米膜中各元素相对百分含量和价态.结果表明:在中性或碱性条件下,厚度为 375~464nm的纳米膜其耐腐蚀性随浸泡时间的延长呈现初期增加而后稳定,浸泡 48h后腐蚀电流较之浸泡初期降低 2个数量级,耐腐蚀电阻增加 2个数量级,在浸泡 1 008h内没有发现腐蚀的产物,Fe是以原子态扩散到膜中.     

FTIR spectroscopic characterization of Nafion®–polyaniline composite films employed for the corrosion control of stainless steel

Nafion®–polyaniline (PAn) composite films deposited by a two-step process on a stainless steel (SS) substrate were characterized in this study using Fourier transform infrared (FTIR) spectroscopy under various conditions employed to evaluate their anticorrosion properties. The SS|Nafion® electrode was first prepared by placing a certain amount of Nafion® on the SS substrate, and then polymerization of aniline was carried out potentiodynamically on the SS|Nafion® electrode. The SS|Nafion®–PAn electrodes subjected to both potentiodynamic polarization and open-circuit conditions in sulfuric acid solutions without and with chlorides appeared to have distinct differences in their FTIR spectra. It is proposed that under the electrochemical conditions used in this study, the PAn is mostly formed inside the Nafion® membrane with a high proportion of oligomers influencing the ionic transport through the membrane. The inhibition of pitting corrosion arises primarily from the enhanced permselectivity of the composite film due to the Nafion® membrane that prevents chloride transport. An essential beneficial effect comes also from the PAn redox properties on the growth of the passive oxide film. Even under severe corrosion conditions, Nafion®–PAn films retain their redox activity and chemical stability, whereas the membrane crystallinity seems to be enhanced.

     

Protective properties of redox polymer film deposited on stainless steel

We propose a novel composite organic-inorganic coating in the form of a redox polymer film for protection of stainless steel against general corrosion in strong acid medium (2 M H₂SO₄). We utilize an anion exchange polymer, protonated poly(4-vinylpyridine), into which hexacyanoferrate anions have been introduced. Owing to the presence of Fe(CN)₆^3–/4– at the interface formed by the film and the steel, a sparingly soluble metal hexacyanoferrate (mostly Prussian blue, PB) is formed as an overcoating on the steels surface, presumably on the passive (metal oxide) layer. The redox polymer film on the steel seems to act as a composite three-dimensional bilayer-type coating in which hexacyanoferrate(III,II) anions (that are capable of effective charge storage) exist in the outer portions of the film, whereas the inner PB layer improves the systems overall adherence and stability. By analogy to a conducting polymer (e.g. polyaniline, polypyrrole), introduction of the redox polymer composite film leads to stabilization of the steel substrates potential within the passive range.Contribution to the 3rd Baltic Conference on Electrochemistry, Gdansk-Sobieszewo, Poland, 23–26 April 2003Dedicated to the memory of Harry B. Mark, Jr. (28 February 1934–3 March 2003)