HMX和HMX/HTPB PBX的晶体缺陷理论研究

建立空位和掺杂点缺陷模型, 用分子动力学(MD)方法, 研究晶体缺陷对β-环四亚甲基硝胺(HMX)和β-HMX/HTPB(端羟基聚丁二烯)高聚物粘结炸药(PBX)的力学性能和爆炸性能的影响. 结果表明, 相对于HMX“完美”晶体(1)考察缺陷晶体(2和3), 以及相对于HMX完美晶体基PBX(1)考察缺陷PBX 2和PBX 3, 均发现弹性系数和(拉伸、体积、剪切)模量下降, 导致体系刚性减弱, 延展性和韧性增强. 这与在基炸药HMX晶体(1, 2和3)中分别加入HTPB高聚物粘结剂形成PBX 1, PBX 2和PBX 3呈现类似的相应的变化趋势和效果. 此外, 研究表明, 爆炸性质也依赖于体系的组成和结构. 因加入的是低能高聚物, 故PBX(1), PBX(2)和PBX(3)的爆热、爆速和爆压均比相应的基炸药(1, 2和3)低, 即晶体(1)＞PBX(1), 晶体(2)＞PBX(2), 晶体(3)＞PBX(3). PBX(1), PBX(2), PBX(3)与对应基炸药(1, 2, 3)的爆速和爆压取相同变化次序, 亦即PBX(1)＞PBX(2)＞PBX(3)对应于晶体(1)＞晶体(2)＞晶体(3). 这些计算结果和规律对PBX配方设计显然具有指导作用.     

ε-CL-20基PBX结构和性能的分子动力学模拟——HEDM理论配方设计初探

以高能量密度化合物ε-CL-20(六硝基六氮杂异伍兹烷)为主体,分别添加5种高聚物黏结剂(Estane5703、GAP、HTPB、PEG和F2314)构成高聚物黏结炸药(PBXs).用分子动力学(MD)方法模拟研究各PBX的结合能、相容性、安全性、力学性能和能量性质,通过比较和分析,为优选黏结剂、指导HEDMs配方设计提供信息和规律.由结合能预测各PBX的相容性和稳定性排序为:ε-CL-20/PEG>ε-CL-20/Estane5703≈ε-CL-20/GAP>ε-CL-20/HTPB>ε-CL-20/F2314.以对相关函数g(r)描述了组分之间相互作用的方式.5种黏结剂的少量加入均能显著改善ε-CL-20的弹性力学性能,增强各向同性.各黏结剂并非通过改变ε-CL-20的分子结构影响PBX的感度.它们主要通过自身的热容(C°p)和密度(ρ)影响PBX的安全性和能量性质.     

四组分高能体系结合能和力学性能的分子动力学模拟

用分子动力学(MD)方法模拟研究了下列4种四组分高能混合体系的结合能和力学性能: 聚叠氮缩水甘油醚(GAP)/硝化甘油(NG)/1,2,4-丁三醇硝酸酯(BTTN)/二硝基偶氮氧化二呋咱(DNOAF)、GAP/ NG/ BTTN/三氢化铝(AlH₃)、聚乙二醇(PEG)/NG/BTTN/DNOAF和PEG/NG/BTTN/AlH₃. 结果表明, 在三组分粘合剂中加进DNOAF和AlH₃, 结合能均较大, 依次为45.35, 56.02, 48.75和65.96 kJ/kg, 预示体系稳定性和相容性均较好. 组分间的相互作用主要是非键力, 且含AlH₃体系的静电力更大, 其余体系以van der Waals力较大. 静态力学分析表明, 在4种混合体系中, PEG/NG/BTTN/AlH₃的拉伸模量、体模量(K)、剪切模量(G)、K/G 和柯西压(C₁₂－C₄₄)值均较大, 预示该体系的刚性、塑性和延展性均较好, 这可能与PEG的醚O和AlH₃的缺电子桥键之间存在特殊的配位键作用有关.     

HMX/F2311 NPT高聚物粘合炸药力学性能的NPT系综分子动力学模拟研究

本文用分子动力学模拟方法研究了以β型奥克托金(β-HMX)含能材料为基,以氟聚物F2311为粘合剂的高聚物粘合炸药(PBX)的力学性能。β-HMX晶体和以其为基的高聚物粘合炸药的弹性常数均由静态弹性常数分析法计算求得，而工程模量和泊松比则由Reuss平均法导出。根据柯西压和本体模量与剪切模量的比值，发现通过加入少量该种聚合物可有效地提高HMX晶体的延展性。     

分子动力学模拟浓度和温度对TATB/PCTFE PBX力学性能的影响

为探讨高聚物粘结炸药(Polymer Bonded Explosive, PBX)的力学性能随温度和高聚物浓度而变化的规律, 用分子动力学(MD)方法和compass力场, 对著名高能炸药1,3,5-三氨基-2,4,6-三硝基苯(TATB)与常用高聚物粘结剂聚三氟氯乙烯(PCTFE)所构成的TATB/PCTFE PBX进行模拟计算. 结果表明, 在一定范围内, 随高聚物浓度的增加, PBX的弹性系数和模量减小, 表明其刚性减小、弹性增加; 而随温度的升高, PBX的刚性减小、弹性增强. 还发现PBX的结合能随浓度增高而增大, 随温度升高而减小.     

PETN基PBX结合能和力学性能的理论研究

PETN(季戊四醇四硝酸酯)是著名的硝酸酯类猛炸药,用量子力学(QM)、分子力学(MM)和分子动力学(MD)方法,计算模拟其与高聚物组成的PBX(高聚物粘结炸药)的结合能和力学性能.以AM1-MO法和MM方法取PETN与系列高聚物的尺寸匹配原子簇模型,经几何全优化计算,发现两种方法求得的结合能彼此线性相关.对PETN超晶胞及其与系列氟聚物组成的双组分PBX,实施COMPASS力场下的分子动力学(MD)周期性模拟,求得其弹性系数、拉伸模量、体模量、剪切模量和泊松比,发现添加少量高聚物确能有效改善炸药的力学性能.     

Molecular dynamics simulations on the structures and properties of ε-CL-20-based PBXs——Primary theoretical studies on HEDM formulation design

Five polymer bonded explosives (PBXs) with the base explosiveε-CL-20 (hexanitrohexaazaisowurtzitane), the most important high energy density compound (HEDC), and five polymer binders (Estane 5703, GAP, HTPB, PEG, and F2314) were constructed. Molecular dynamics (MD) method was employed to investigate their binding energies (Ebind), compatibility, safety, mechanical properties, and energetic properties. The information and rules were reported for choosing better binders and guiding formulation design of high energy density material (HEDM). According to the calculated binding energies, the ordering of compatibility and stability of the five PBXs was predicted as ε-CL-20/PEG ＞ ε-CL-20/ Estane5703 ≈ε-CL-20/GAP ＞ ε-CL-20/HTPB ＞ ε-CL-20/F2314. By pair correlation function g(r) analyses, hydrogen bonds and vdw are found to be the main interactions between the two components. The elasticity and isotropy of PBXs based ε-CL-20 can be obviously improved more than pure ε-CL-20 crystal. It is not by changing the molecular structures of ε-CL-20 for each binder to affect the sensitivity. The safety and energetic properties of these PBXs are mainly influenced by the thermal capability (C°p) and density (ρ) of binders, respectively.     

CL-20/TNT共晶炸药的分子动力学研究

运用分子动力学(MD)方法,选择凝聚态分子势能优化力场(COMPASS),对六硝基六氮杂异伍兹烷(ε-CL-20)、2,4,6-三硝基甲苯(TNT)晶体及其等摩尔比的CL-20/TNT混合炸药和共晶炸药进行不同温度下恒定粒子数等压等温(NPT)系综模拟研究.结果表明,CL-20/TNT共晶的内聚能密度(CED)和结合能随温度的升高逐渐减小;共晶的CED比混合炸药的大,结合能是混合炸药的2倍多,预示其稳定性明显增强.对相关函数和局部放大结构显示共晶中组分分子间作用主要来自TNT中H和CL-20中O以及CL-20中H和TNT中O之间形成的氢键.通过波动法求得的弹性力学性能结果表明,CL-20/TNT共晶的拉伸模量(E)、体积模量(K)和剪切模量(G)介于ε-CL-20和TNT晶体之间,且随温度的升高而下降,符合一般预期;但共晶炸药的柯西压(C12-C44,Cij弹性系数)、K/G和泊松比(ν)均比其组分炸药ε-CL-20和TNT高得多,预示该共晶具有异常高的延展性和弹性伸长,主要是二组分呈层状交替排列且之间存在较强相互作用所致.     

TATB基PBX结合能和力学性能的理论研究

以SCF-MO-AM1方法和MM-COMPASS力场, 对TATB (1,3,5-三氨基-2,4,6-三硝基苯)与系列高聚物组成的PBX(高聚物粘结炸药)尺寸匹配原子簇, 分别进行全优化几何构型计算, 发现两种方法求得的结合能存在良好的线性关系. 对TATB (3×3×4)超晶胞及其与系列氟聚物组成的双组分PBX, 实施COMPASS力场下的分子动力学(MD)周期性模拟计算, 首次求得其弹性系数、模量和泊松比, 发现添加少量高聚物即能有效改善炸药的力学性能.     

Molecular dynamics simulations on the structures and properties of ε-CL-20-based PBXs ——Primary theoretical studies on HEDM formulation design

Five polymer bonded explosives (PBXs) with the base explosive ε-CL-20 (hexanitrohexaazaisowurtzi- tane), the most important high energy density compound (HEDC), and five polymer binders (Estane 5703, GAP, HTPB, PEG, and F2314) were constructed. Molecular dynamics (MD) method was employed to investigate their binding energies (Ebind), compatibility, safety, mechanical properties, and energetic properties. The information and rules were reported for choosing better binders and guiding formula- tion design of high energy density material (HEDM). According to the calculated binding energies, the ordering of compatibility and stability of the five PBXs was predicted as ε-CL-20/PEG > ε-CL-20/ Estane5703 ≈ε-CL-20/GAP > ε-CL-20/HTPB > ε-CL-20/F2314. By pair correlation function g(r) analyses, hydrogen bonds and vdw are found to be the main interactions between the two components. The elasticity and isotropy of PBXs based ε-CL-20 can be obviously improved more than pure ε-CL-20 crystal. It is not by changing the molecular structures of ε-CL-20 for each binder to affect the sensitivity. The safety and energetic properties of these PBXs are mainly influenced by the thermal capability (C°p) and density (ρ) of binders, respectively.     

Ti-V基储氢合金及其氢化物的物相结构与组分优化设计

Ti-V基储氢合金在室温、常压下即可表现出良好的储氢特性,且质量储氢容量明显高于传统AB₅型储氢合金,从而在氢气的精制和回收、运输和储存及热泵等方面有较早的应用。 此外,在混合气体分离、核反应堆中处理氢的同位素、镍氢电池及燃料电池负极材料等方面也得到了广泛的研究与关注。 基于目前Ti-V基储氢合金的研究现状,概述了该类合金的优势、限制性因素(包括成因)及改性手段。 此外,为了进一步理解Ti-V基合金储氢机理、构建合金组分与储氢特性之间的对应关系,本工作重点围绕Ti-V基储氢合金及其氢化物的结构、组分优化设计展开综述,并对其未来研究方向做出展望。     

Ni(Ⅱ)和Zn(Ⅱ)的乙基黄原酸盐与吡啶碱配合物的合成及性质的研究

乙基黄原酸基的结构为:(简写为Exan,它是一个双齿配体,能和许多金属离子形成稳定配合物。 本文依据实验结果,对3种Ni(Ⅱ)和2种Zn(Ⅱ)的乙基黄原酸盐混合配合物的性质作一些系统的比较.应用红外光谱讨论这些混合配合物的C—O及C—S键振动频率位移;用热谱讨论它们的热稳定性及失重过程的变化;通过组成分析用电子光谱及磁学方     

四环素-铕与卵磷脂的相互作用及卵磷脂的测定

以四环素(TC)-Eu3 作为荧光探针,提出了新的荧光光度法测量卵磷脂(PC)。在pH 5.7的酸度条件下,扫描不同浓度的PC与TC-Eu3 的荧光光谱。通过优化实验条件,得到了测定PC的最佳条件。卵磷脂能使TC-Eu3 位于612 nm处的特征荧光显著增强且增强的荧光强度与PC的量成正比。测量的线性范围为4.0×10-7~1.4×10-5mol/L,检出限为3.9×10-8mol/L。该方法已用于实际样品的测定。     

Synthesis and structure of hydroxyisoxazolidines and derivatives of hydroxylamine and alkenals

The reactions of N-substituted hydroxylamines with alkenals serve as a method for the synthesis of the corresponding 2-substituted 3(5)-hydroxyisoxazolidines. The reaction pathway is determined by the nature of the substituent attached to the nitrogen atom. Ring-chain isomerism has been detected in these newly obtained compoundsTranslated from Khimiya Geterotsiklicheskikh Soedinenii, No. 9, pp. 1270–1276, September, 1987.     

红霉素9,11-亚胺醚和乙腈分子加合物的合成和晶体结构

通过控制红霉素A (E)肟的贝克曼重排反应条件合成了一种关键中间体红霉素9,11-亚胺醚, 该化合物可与乙腈形成稳定的分子加合物(摩尔比为1∶1), 未见文献报道. 阐述了该化合物的合成、晶体结构、晶体学数据和结构参数. 该化合物为无色透明晶体, 属单斜晶系, 空间群P2₁. 对该加合物和已知化合物红霉素6,9-亚胺醚晶体结构的对照解析, 有助于对重排反应机理、异构化机理和两异构体还原差异性的分析, 对重排反应和还原反应起到积极的指导作用.     

Sizes of atoms and ions and covalency of bonding in molecules and crystals

A new system of atomic radii for the elements up to barium inclusive is constructed. Values of the radii are chosen so as the dependence between the dissociation energy of diatomic homonuclear molecules and a depth of atom overlapping is monotonous, and the scatter of data is minimal. The depth of overlapping is calculated as a difference between the sum of atomic radii and an experimental interatomic distance. Conclusions are made that: the radii of free atoms and ions are determined by the value of the electron density equal to 0.01 au; they considerably change in molecules and crystals only as a result of the charge transfer from cation to anion; covalent bonding is well described by the overlapping of free atoms (ions), confined by the surface of the given radius, and its energy depends upon the depth of overlapping of valence electron densities of atoms. A method of overlapping atoms is proposed for the approximate estimation of ionic sizes and charges in bound systems.     

Interaction and Stability of Mixed Micelle and Monolayer of Nonionic and Cationic Surfactant Mixtures

Interaction and stability of binary mixtures of cationic surfactants hexadecyltrimethylammonium bromide (HTAB) or hexadecylpyridinium bromide (HPyBr) with nonionic surfactant decanoyl-N-methyl-glucamide (Mega-10) have been studied at different mole fraction of cationic surfactants by using interfacial tension measurements and fluorescence probe techniques. From interfacial tension measurements, the critical micellar concentration and various interfacial thermodynamic parameters have been evaluated. The experimental cmc's were analyzed with the pseudophase separation model, the regular solution theory, and the Maeda's approach. These approaches allowed us to determine the interaction parameter and composition in the mixed state. By using the static quenching method, the mean micellar aggregation numbers of pure and mixed micelles of HTAB + Mega-10 were obtained. It has been observed that the aggregation number of mixed micelles deviates negatively from the ideal behavior. The micropolarity of the micelle was monitored with pyrene fluorescence intensity ratio and found to be increase with the increase of ionic content. The polarization of fluorescence probe Rhodamine B was monitored at different mole fraction of cationic surfactants.     

多环芳二酐型聚酯亚胺膜的透气性能

多环芳二酐型聚酯亚胺膜的透气性能李悦生，丁孟贤，徐纪平（浙江大学高分子科学与工程研究所，杭州，３１００２７）（中国科学院长春应用化学研究所）关键词聚醚酰亚胺，聚酯酰亚胺，膜，透气性通常的聚酰亚胺加工性能较差，在芳环二酐的苯环间引入醚键等柔性基团后，其...     

Synthesis and Photochemistry of Diphenylchlorin and Diphenylbacteriochlorin

5, 15-Diphenylporphyrin (DPP), a novel porphyrin model compound, was always inaccessible in quantities suitable for study1 because the difficulty of synthesis. So that the characteristic of this molecule had not been explored until a novel method developed for the preparation of DPP recently2. Therefore it will be possible for the synthesis of DPP-based photosensitizers, and investigation of their photodynamic properties. Here we reported the synthesis of novel photosensitizers 5, 15-diphe…