Tomographic images improved by holographic synthesis

A holographic technique is used to combine the information content of conventional, 2D tomographic scan images into a full-parallax, 3D reconstruction of the recorded subject. Advantages of the system over the conventional, pseudo-3D reconstructions obtained by computer image processing, or over the direct examination of the scan images by the physician, are a more realistic and detailed information to the observer, as true parallax and physical depth cues are fully maintained.     

无透镜傅里叶变换型全息瞄准具研究

基于无透镜傅里叶变换全息术制作了一种新型激光全息瞄准具。瞄准具的核心部件是由一块无透镜傅里叶变换位相全息图和一块全息光束变换器组成的全息光学元件。其突出优点是大视场,大出瞳距离,适合双眼瞄准。此外,瞄准线为明亮的虚像,不会暴露目标,结构简单,对射击近距离运动目标效果突出。介绍了全息瞄准具组件的原理和制作方法,并对其性能进行了分析。     

Enhancement of LED light extraction via diffraction of hexagonal lattice fabricated in ITO layer with holographic lithography and wet etching

A novel method for enhancing light extraction efficiency of LEDs via diffraction of the lattice fabricated in ITO layers of LEDs is proposed. The lattice fabrication process includes holographic lithography and wet etching. 3-beam interference holographic approach was used to fabricate large-area hexagonal lattice mask which can cover 2-inch semiconductor wafer, and acid etching was used to transfer the lattice structure into p-contact ITO layer. 1.4 fold enhancement of light output at 20 mA injection current was obtained from GaN-based LEDs in the primary experiment. The lattice fabrication process is rapid and cost-effective thus enabling industrial mass production of high brightness LEDs.     

Compact photonic delay line constructed by holographic optical elements

To fully support phased-array antenna and other applications, a 3-range (long time, moderate time, and short time) delay line structures with holographic optical elements is proposed. Flexibility, light-weight, on-axis coupling, easy alignment, easy fabrication, and compactness are their advantages. When use holographic optical elements to build the photonic delay line system, all of the delay and non-delay paths in these three photonic delay lines are setting in a compact structure. They do not need any extra components, such as mirrors and optical paths in free space, and can bear stronger vibration. Therefore, the holographic optical elements are more suitable to design the photonic delay lines. In these three structures, their losses and crosstalk s are balanced. All of delay and non-delay cases in these three delay line structures, their crosstalk, signal-to-noise ratio, and loss are 1/81,000, 59.1 dB, and 3.2 dB, respectively. Finally, to support complete applications, a polarization independent photonic delay line system with holographic optical elements is proposed, too.     

用全息光学元件实现对眼睛的激光防护

反射式全息滤光片具有很好的滤光特性,可作为一种激光防护元件.本文对这种元件的波长选择性,角度选择性,所能承受的功率密度进行分析,并讨论了实际应用的可能性.     

High efficient generation of holographic stereograms based on wavefront recording plane

A computer generated holographic stereogram based on the wavefront recording plane(WRP) is presented. A WRP closed to the parallax image plane is introduced to record the complex amplitude in a small region for each point in the parallax image. By using three times of fast Fourier transform(FFT) to execute the Fresnel diffraction calculation between the WRP and the holographic stereogram plane, the object wave contributing to the hologram pattern can be achieved. The computation complexity of the proposed approach is dramatically reduced. The results show that the calculation time can be decreased by more than one order of magnitude.     

ICF系统中全息透镜聚焦特性及衍射效率分析

 根据全息透镜的工作原理，利用光线追迹法对其聚焦特性进行了理论分析。使用标量衍射法分析了全息透镜的衍射效率，讨论了不同的光栅槽型对其衍射效率的影响。对分析过程中所涉及到的有关近似处理方法的使用和影响进行了说明，讨论了全息透镜用作取样光栅的优点。     

A method to accurately control the period of subwavelength planar holographic grating in the fabrication process of guided mode resonance filter

Subwavelength optical element such as guided-mode resonance filter has gained much interest recently due to its properties and applications. It is very hard to fabricate an ideal guided-mode resonance filter with the same parameters as the designed one. The reason is that the resonance wavelength of guided-mode resonance filter is susceptible to the fabrication errors of its parameters, such as the period, the groove depth, the thickness of a guided-wave layer, and the refraction indexes of materials, etc. In this article, a method to accurately control the period of subwavelength planar holographic grating which was used as a sub-layer of the guided mode resonance filter is investigated. Results show that utilizing a convex lens placed in the exposure position can cause the adjusting of the period of subwavelength planar grating more convenient in the holographic optical path during the fabrication process. Accuracy controlling the period of grating which was used as the sub-layer of guided-mode resonance filter has great significance in the fabrication of guided-mode resonance filter.     

Consumer holographic read-only memory reader with mastering and replication technology

What is believed to be a novel holographic design for read-only memory systems allows a compact low-cost consumer drive within a 10 mm drive height, using a lensless phase conjugate readout and a combination of polytopic and angle multiplexing. A two-step mastering method enables production of high-efficiency holographic masters, and fast replication is possible by using only a series of plane-wave illuminations. Mastering and replication techniques are verified experimentally with an array of 125 holograms with no measured bit errors.     

A novel three-dimensional holographic display system based on LC-R2500 spatial light modulator

A novel holographic display system is proposed in this paper. The system takes LC-R2500, a kind of reflective liquid crystal spatial light modulator, (LC-SLM) as the core display unit, which can meet the requirement of real-time reconstruction of three-dimensional (3D) objects from holograms in free space. The relationship between hologram recording and image reconstruction is discussed, and the parameters associated with the magnification of reconstructed image over original object are determined. Experimental results of holographic display using the system are also given in the end.     

零像散宽波段平场全息凹面光栅的优化设计

平场全息凹面光栅的理想像面应为一平面,此时子午焦线与弧矢焦线均位于像面内且彼此重合,形成接近理想像点的光谱像。但子午焦线总是存在弯曲,只有弧矢焦线在满足一定条件的情况下可以成为直线。鉴于此,提出一种满足平场弧矢焦线条件的平场全息凹面光栅设计方法。利用光学设计软件ZEMAX研究了运用此方法设计的零像散光栅的成像特性,并与原有设计方法得到的结果进行比较。模拟结果显示,满足平场弧矢焦线条件的光栅能够达到与原有方法所设计光栅相当的光谱分辨率,而其全波段零像散特性使其拥有更加出色的弧矢方向聚焦性能,显著提高平场光谱仪的信噪比。     

A volume holographic optical element for optical coupling to single-mode fibers

We propose and demonstrate a volume holographic optical element (VHOE) for signal-mode fiber coupling and the sending of conjugate waves of reference light for the construction of holographic elements. Given the inherent Bragg conditions of the VHOE, the angular tolerances of the conjugate reading light in both the horizontal and vertical directions are studied under different conditions.     

Light scalar tetraquarks from a holographic perspective

We discuss how a dominant tetraquark component of the lightest scalar mesons may emerge in AdS/QCD gravity duals. In particular, we show that the exceptionally strong binding required to render the tetraquark ground state lighter than the lowest-lying scalar quark–antiquark nonet can be holographically encoded into bulk-mass corrections for the tetraquark's dual mode. The latter are argued to originate from the anomalous dimension of the corresponding four-quark interpolator. To provide a concrete example, we implement this mechanism into the dilaton soft-wall dual for holographic QCD. Preventing the lowest-lying dual mode from collapsing into the AdS boundary then establishes a rather generic lower bound on the tetraquark mass (which may be overcome in the presence of additional background fields). We further demonstrate that the higher tetraquark excitations can become heavier than their quark–antiquark counterparts and are thus likely to dissolve into the multiparticle continuum.     

Pipe flow measurement by using a side-scattering holographic particle imaging technique

A side scattering holographic particle imaging technique has been developed and demonstrated to be a capable tool for obtaining good quality images of a particle field in a high Reynolds number pipe flow. Instantaneous three-dimensional velocity components can be measured. The streamwise velocity error is estimated to be about 5%. Limitations of this optical set-up are discussed. The methodology and results presented will be of use for designing a pulsed laser holographic technique for turbulent velocity measurement or particle diagnostics in a pipe flow.     

On the feedback holographic associative memory

Theoretical expressions and convergence conditions are developed here for the output of a feedback holographic associative memory. It is shown that a feedback holographic associative memory becomes a pinhole holographic associative memory under certain conditions, and thus is a generalization of the pinhole holographic associative memory. The crosstalk in the output of a feedback holographic associative memory can also be removed by a threshold device or controlled by the overall optical efficiency of the memory. A simulation is provided to verify the theoretical results shown here. Using the theoretical results and simulation verification, a feedback holographic associative memory can be designed efficiently. In addition, if a threshold device is used, optical elements with high optical efficiency can be used in a feedback holographic associative memory.     

Optimization of a holographic memory setup using an LCD and a PVA-based photopolymer

Holographic data pages were stored in a polyvinyl alcohol (PVA)/acrylamide (AA) photopolymer. This material is formed of AA photopolymers which are considered interesting materials for recording holographic memories. A liquid crystal device was used to modify the object beam and store the data pages in the material. During the storage process, some parameters like exposure time, beam ratio and reading beam intensity were controlled to obtain high image quality after the reconstruction process. The bit error rate (BER) was calculated fitting the histograms of the images to determine what parameters improve the quality of the images.     

Modified holographic dark energy in DGP brane world

In this Letter, the cosmological dynamics of a modified holographic dark energy which is derived from the UV/IR duality by considering the black hole mass in higher dimensions as UV cutoff, is investigated in Dvali–Gabadadze–Porrati (DGP) brane world model. We choose Hubble horizon and future event horizon as IR cutoff respectively. And the two branches of the DGP model are both taken into account. When Hubble horizon is considered as IR cutoff, the modified holographic dark energy (HDE) behaves like an effect dark energy that modification of gravity in pure DGP brane world model acts and it can drive the expansion of the universe speed up at late time in ?=−1$?=-1$ branch which in pure DGP model cannot undergo an accelerating phase. When future event horizon acts as IR cutoff, the equation of state parameter of the modified HDE can cross the phantom divide.     

Monitoring of residual stresses in injection-molded plastics with holographic interferometry

Residual stresses are often trapped in injection-molded plastic parts due to the rapid cooling of the material in this manufacturing process. These stresses are a common source of failure in plastic components in automobiles, appliances and computers and are difficult to measure with conventional residual-stress experimental methods. Real-time holographic interferometry appears to be a viable technique to identify and monitor these stresses in plastic parts. In this investigation, holographic interferometry was used to monitor the relaxation of residual stresses in the plastic-molded actuator arm of a computer hard drive. In the first phase of this study, the relaxation of these residual stresses as a function of temperature was observed. In the second phase, the time to completely relax the residual stresses in the plastic part at an elevated temperature, the annealing temperature, was determined. In the third phase of this investigation, the rate of relaxation of these residual stresses as a function of time at various operating temperatures, was studied. Based on the results of this study, holographic interferometry appears to be a powerful research tool in the study of residual stresses in plastic parts. It also has the potential to be a practical tool for the inspection of manufactured plastic parts for the presence of residual stress.     

Multidot recording of rainbow and multicolor holographic stereograms

A new method for rainbow and multicolor holographic stereograms is described using the technique of multidot recording, which was originally developed for the syntheses of full-parallax holographic stereograms. Instead of recording vertical parallax, an image of horizontal slit is synthesized for rainbow holography. It becomes possible to obtain large images by a compact optical system, since the hologram is composed of many small elementary holograms. Multicolor image is also produced by the same system introducing a simple image processing. Experimental results of three-dimensional and color imagery are demonstrated.