LiCl-KCl熔盐体系中镨(Ⅲ)在镍电极上的电化学行为

采用循环伏安、方波伏安、计时电位和开路计时电位等电化学方法研究了Pr(Ⅲ)离子在共晶LiClKCl熔盐中Ni电极上的电化学行为及Pr-Ni合金化机理.结果表明,Pr(Ⅲ)离子的电化学还原过程为三电子转移的一步反应.与惰性Mo电极上的循环伏安曲线相比,Pr(Ⅲ)离子在活性Ni电极的循环伏安曲线上还出现了4对氧化还原峰,表明Pr(Ⅲ)离子在Ni电极上发生欠电位沉积,是由于生成不同的Pr-Ni金属间化合物.采用X射线衍射仪和扫描电子显微镜-能谱仪等对恒电位电解的产物进行了表征.结果表明,在不同电位下进行恒电位电解时,每个电位上只得到一种Pr-Ni金属间化合物,分别为Pr Ni2,Pr Ni3,Pr2Ni7和Pr Ni5.     

Dy(Ⅲ)离子在LiCl-KCl熔盐中的电化学行为及Dy-Ni金属间化合物的选择性制备

采用循环伏安、方波伏安和开路计时电位等电化学方法研究了Dy(Ⅲ)离子在LiCl-KCl 共晶盐中的电化学行为及Dy-Ni 合金形成的电化学机理. 循环伏安和方波伏安法研究表明, Dy(Ⅲ)离子的电化学还原过程为三个电子转移的一步反应. 与惰性W电极相比, Dy(Ⅲ) 离子在Ni 电极上的循环伏安曲线多出了三对氧化还原峰,是由于Dy与Ni 形成了合金化合物, 导致Dy(Ⅲ)离子在活性Ni 电极发生了欠电位沉积. 采用X射线衍射(XRD)和扫描电子显微镜(SEM)附带能量散射谱(EDS)对恒电位(-1.6, -1.8 和-2.0 V)电解制备的Dy-Ni 合金进行分析, 分别获得了DyNi₅, Dy₂Ni₇和DyNi₂金属间化合物. 实验结果表明, 通过控制电位进行恒电位电解可以有选择性地制备不同的金属间化合物.     

Pr(Ⅲ)离子在LiCl-KCl熔体中Bi膜W电极上的电化学行为

采用循环伏安、方波伏安、计时电位和开路计时电位等电化学方法研究了Pr（Ⅲ）离子在LiCl-KCl-BiCl₃熔体中W电极上的电化学行为。循环伏安和方波伏安的研究表明,Pr在预先沉积的Bi膜电极上发生欠电位沉积是由于生成了Pr-Bi金属间化合物,导致Pr（Ⅲ）在Bi膜电极上的还原电位比在W电极上还原电位更正。从开路计时电位曲线可以观察到两相共存的Pr-Bi金属间化合物的两个平台。利用开路计时电位计算了723-873 K温度范围内Pr在Pr-Bi合金中的活度和偏摩尔Gibbs自由能以及Pr-Bi金属间化合物的生成Gibbs自由能。通过恒电位电解,在液态Bi电极上得到了Pr-Bi合金,并采用X射线衍射（XRD）和扫描电子显微镜（SEM）附带能量散射谱（EDS）对样品进行了表征,结果表明所得到的Pr-Bi金属间化合物为PrBi₂和PrBi。     

Dy（III）离子在LiCl-KCl熔盐中的电化学行为及Dy-Ni金属间化合物的选择性制备

采用循环伏安、方波伏安和开路计时电位等电化学方法研究了Dy(III)离子在LiCl-KCl共晶盐中的电化学行为及Dy-Ni合金形成的电化学机理.循环伏安和方波伏安法研究表明, Dy(III)离子的电化学还原过程为三个电子转移的一步反应.与惰性W电极相比, Dy(III)离子在Ni电极上的循环伏安曲线多出了三对氧化还原峰,是由于Dy与Ni形成了合金化合物,导致Dy(III)离子在活性Ni电极发生了欠电位沉积.采用X射线衍射(XRD)和扫描电子显微镜(SEM)附带能量散射谱(EDS)对恒电位(-1.6,-1.8和-2.0 V)电解制备的Dy-Ni合金进行分析,分别获得了DyNi5, Dy2Ni7和DyNi2金属间化合物.实验结果表明,通过控制电位进行恒电位电解可以有选择性地制备不同的金属间化合物.     

在LiCl-KCl共晶熔体中电化学制备钬镍金属间化合物(英文)

采用循环伏安、方波伏安和开路计时电位等方法研究了Ho(Ⅲ)离子在LiCl-KCl共晶熔体中的电化学行为及Ho-Ni合金化机理。在惰性W电极上,Ho(Ⅲ)离子在-2.06 V(vs Ag/Ag Cl)发生电化学还原,该还原过程为3个电子转移的一步反应。与惰性W电极上的循环伏安相比,Ho(Ⅲ)离子在活性Ni电极的循环伏安曲线上还出现了3对氧化还原峰,是Ho与Ni形成了金属间化合物,导致了Ho(Ⅲ)离子在活性Ni电极发生了欠电位沉积。在不同的电位进行恒电位电解制备的3个不同的Ho-Ni合金,采用X-射线衍射(XRD)和扫描电子显微镜-能谱仪(SEM-EDS)等测试手段进行表征,结果表明:制备的3种合金分别是Ho2Ni17,Ho Ni5和Ho Ni23种合金化合物。     

Pr(III)离子在LiCl-KCl熔体中Bi膜W电极上的电化学行为（英文）

采用循环伏安、方波伏安、计时电位和开路计时电位等电化学方法研究了Pr(III)离子在Li Cl-KCl-Bi Cl_3熔体中W电极上的电化学行为。循环伏安和方波伏安的研究表明,Pr在预先沉积的Bi膜电极上发生欠电位沉积是由于生成了Pr-Bi金属间化合物,导致Pr(III)在Bi膜电极上的还原电位比在W电极上还原电位更正。从开路计时电位曲线可以观察到两相共存的Pr-Bi金属间化合物的两个平台。利用开路计时电位计算了723-873 K温度范围内Pr在Pr-Bi合金中的活度和偏摩尔Gibbs自由能以及Pr-Bi金属间化合物的生成Gibbs自由能。通过恒电位电解,在液态Bi电极上得到了Pr-Bi合金,并采用X射线衍射(XRD)和扫描电子显微镜(SEM)附带能量散射谱(EDS)对样品进行了表征,结果表明所得到的Pr-Bi金属间化合物为Pr Bi_2和Pr Bi。     

在LiCl-KCl共晶熔体中电化学制备钬镍金属间化合物

采用循环伏安、方波伏安和开路计时电位等研究了Ho(Ⅲ)离子在LiCl-KCl共晶熔体中的电化学行为及Ho-Ni合金化机理。在惰性W电极上,Ho(Ⅲ)离子在-2.06 V(vs Ag/AgCl)发生电化学还原,该还原过程为3个电子转移的一步反应。与惰性W电极上的循环伏安相比,Ho(Ⅲ)离子在活性Ni电极的循环伏安曲线上还出现了3对氧化还原峰,是Ho与Ni形成了金属间化合物,导致了Ho(Ⅲ)离子在活性Ni电极发生了欠电位沉积。在不同的电位进行恒电位电解制备的3个不同的Ho-Ni合金,采用X-射线衍射(XRD)和扫描电子显微镜-能谱仪(SEM-EDS)等测试手段进行表征,结果表明:制备的3种合金分别是Ho₂Ni₁₇,HoNi₅ 和 HoNi₂ 3种合金化合物。     

LiCl-KCl-LaCl3熔盐体系中La(III)的电化学行为

在773 K条件下,研究了La（III）在LiCl-KCl熔盐中W和Ni电极上的电化学行为。La（III）还原反应是一步三电子转移的准可逆反应;通过在Ni电极上直接电沉积La的方法可以获得La-Ni金属间化合物;恒电位电解可以获得含三种金属间化合物（LaNi₅、La₇Ni₁₆和La₂Ni₃）的La-Ni合金层,并且通过X射线衍射仪（XRD）和扫描电镜-能谱分析仪（SEM-EDS）确定物相并表征结构。采用开路计时电位法估算了LaNi₅金属间化合物的标准生成吉布斯自由能。揭示了恒电位电解方法是制备La-Ni镀层合金以及提取熔盐中La的有效方法。     

钠盐溶液中U(Ⅵ)的电化学电子转移与晶化研究

采用循环伏安法分析钠盐溶液中U(Ⅵ)的电化学行为, 恒电位电化学还原处理U(Ⅵ), 利用交流阻抗谱分析电化学还原反应中的过程动力学特性, 利用X射线衍射、 扫描电子显微镜和电子能谱等方法分析了U(Ⅵ)的电化学晶化. 结果表明, 在钠盐溶液中, U(Ⅵ)可通过电化学反应先还原成低价的U(V)并进一步还原为U(Ⅳ), U(Ⅳ)一步氧化为U(Ⅵ), U(Ⅳ)/U(Ⅵ)之间的电化学转化过程受扩散控制, 且U(Ⅵ)的电化学电子转移易受环境pH值的影响; 恒电位还原4 h时, 溶液中U(Ⅵ)的去除率可达90%, U(Ⅵ)的结晶固化产物主要以固态的(UO₂)₆O₂(OH)₈·6H₂O(水铀矿) 和UO₂的形式附着在工作电极上.     

氯化物体系中La的电化学提取及共沉积Zn-La合金

通过循环伏安、方波伏安和开路计时电位等方法研究了723 K时,La(Ⅲ)在LiCl-KCl和LiCl-KClZnCl_2熔盐体系中Mo电极上的电化学行为.结果表明,La(Ⅲ)还原为金属La是一步扩散控制的不可逆还原反应.在LiCl-KCl-ZnCl_2熔盐中,La(Ⅲ)在预先沉积的Zn阴极上欠电位沉积形成4种Zn-La金属间化合物.在923 K时通过恒电流电解获得Zn-La合金,通过X射线衍射(XRD)和扫描电子显微镜(SEM)以及附带的能谱仪(EDS)对合金的相组成和微观形貌进行了分析.采用恒电位电解提取La并用方波伏安曲线检测La(Ⅲ)离子浓度的变化,电解50 h后,La(Ⅲ)离子浓度接近于零,提取效率达到99.55%.     

Voltammetry and XPS analysis of a chalcopyrite CuFeS2 electrode

A chalcopyrite CuFeS₂ electrode obtained from the “El Teniente” mine (Chile) has been studied by cyclic voltammetry (CV) in a borax alkaline solution at pH 9.2 and by X-ray photoelectron spectroscopy (XPS) before and after the electrochemical treatment at oxidation and reduction potentials. The voltagram shows two peaks in the positive sweep direction which can be assigned to an oxidation process at the electrode surface that involve the formation of Fe₂O₃ and CuO giving rise to an irregular surface layer of the electrode with islands of different chemical composition. The XPS results confirm the formation of Fe₂O₃ and CuO at the electrode surface and their stability against decomposition at reduction potential. In addition, the formation of FEOOH, CuFeO and CuS species at the electrode surface can be deduced by XPS as well as a covering of the whole electrode surface by species due to carbon–oxygen groups.     

Electrochemical behavior of methyl viologen at graphite electrodes modified with Nafion sol–gel composite

Electrodes were prepared by spin-coating spectroscopic graphite rods with a Nafion doped sol. Coating solutions consisting of Nafion:TEOS (tetraethoxysilane) ratios of 3:1 and 4:1 gave smooth films on the electrode surface. These modified electrodes were evaluated and compared with Nafion modified and bare spectroscopic graphite electrodes using methyl viologen (MV²⁺) as a representative cationic electroactive probe. Substantial partitioning of MV²⁺ into the Nafion:sol–gel matrix to the electrode surface was observed by cyclic voltammetry and square wave voltammetry. Cyclic voltammograms of MV²⁺ in 0.1 M NaCl at Nafion:sol–gel 4:1 modified electrodes showed a reversible reduction to MV⁺ with E^0′=−0.695 V vs. Ag/AgCl. Results of scan rate variation showed the wave to be characterized by semi-infinite diffusion for scan rates in the range 50–500 mV/s. Slowing the scan rate below 50 mV/s resulted in a transition to thin-layer behavior. MV²⁺ partitioned much more quickly into the sol–gel-Nafion modified electrodes compared to pure Nafion modified electrodes. Reversibility of the MV²⁺-loaded modified Nafion-doped sol–gel coatings on electrodes was obtained by soaking in 1 M NaCl solution. Concentration calibration plots for MV²⁺ at the sol–gel-Nafion modified electrodes were nonlinear. Substantial enhancement of current signal at low concentrations was observed by square wave voltammetry.     

高碳铬铁在氢氧化钠水溶液中电化学氧化过程

铬铁电化学氧化法是一种新的制备铬酸钠的方法,然而高碳铬铁在NaOH水溶液中的电化学氧化过程尚不明确。 采用循环伏安法(CV)、稳态极化法(LSV)等电化学测试方法对金属铬、高碳铬铁在NaOH水溶液中的电化学氧化过程进行研究,通过扫描电子显微镜(SEM)、能量散射谱(EDS)和X射线光电子能谱(XPS)对高碳铬铁电解后固相产物表征,判断固相产物的组成。 结果表明,高碳铬铁不同于金属铬的电氧化过程,它在NaOH溶液中通过Cr(0)→Cr(Ⅵ)的电氧化方式生成铬酸钠,中间产物Cr(OH)₃和Fe(0)发生电化学反应生成稳定的FeCr₂O₄。 随着NaOH浓度的增加,电势较低时,受高碳铬铁中Fe(0)的影响,高碳铬铁容易在NaOH水溶液中发生钝化;当电势足够正时,钝化膜溶解,生成铬酸钠、氢氧化铁和亚铬酸亚铁,同时,阳极表面有氧气析出。 高碳铬铁电化学氧化制备铬酸钠的适宜条件:碱浓度≥2 mol/L,阳极电势≥1.6 V(vs.SCE)。     

基于纳米银/碳纳米纤维复合材料的增强效应电化学测定多贝斯

将银纳米粒子(AgNPs)电沉积在碳纳米纤维(CNFs)修饰玻碳电极表面制备纳米银/碳纳米纤维修饰玻碳电极(AgNPs/CNFs/GCE).采用扫描电镜考察其表面形态,在K3[Fe(CN)6]-K4[Fe(CN)6]体系中用循环伏安法和电化学阻抗法研究AgNPs/CNFs/GCE的电化学行为.采用循环伏安法和方波伏安法...     

Electrochemical behaviour of lanthanum fluoride in molten fluorides

The electrochemical behaviour of lanthanum fluoride dissolved in molten lithium fluoride and in eutectic mixture LiF-CaF₂ was investigated by cyclic voltammetry and laboratory electrolysis. The cyclic voltammetry experiments were carried out at 900°C and 800°C, respectively, in a graphite crucible (counter electrode). Several types of working electrodes (Mo, W, Ni and Cu) were used. Ni/Ni(II) was used as a reference electrode. Laboratory electrolysis was carried out in the system LiF-CaF₂-LaF₃ at 800°C in galvanostatic (j _c = −0.21 A cm⁻²) and potentiostatic (E = 0.87 V) regimes. In both cases, nickel served as the cathode and graphite as the anode. It was found that no new separate reduction peak occurred on the molybdenum or tungsten electrodes in the investigated systems. When copper or nickel electrodes were used, new peaks corresponding to the reduction of lanthanum(III) to lanthanum metal appeared. This can be explained by the formation of alloys or intermetallic compounds of lanthanum with copper or nickel. X-ray microanalysis showed that lanthanum was electrodeposited together with calcium under formation of intermetallic compounds with the electrode materials in the galvanostatic regime. In the potentiostatic regime, mainly lanthanum was deposited, which enabled its separation.     

Electrochemical Behaviour of Magnesium(II) on Ni Electrode inLiCl-KCl Eutectic

The electrochemical behaviour of magnesium(II) and the formation mechanism of Mg-Ni alloys on Ni electrode were studied in LiCl-KCl eutectic using various electrochemical techniques. Cyclic voltammogram and square-wave voltammogram revealed that under-potential deposition of magnesium occurred on Ni electrode because Mg-Ni alloy compounds were formed. The thermodynamic properties of the Mg-Ni intermetallics, Mg₂Ni and MgNi₂, were determined using open circuit chronopotentiometry in the temperature range of 818―893 K. Moreover, the Mg-Ni alloys were produced by potentiostatic and galvanostatic electrolysis under different conditions and characterized by means of scanning electron microscopy(SEM) equipped with energy dispersive spectrometry(EDS) and X-ray diffraction(XRD). The experimental results indicate that Mg-Ni intermetallic compounds can be selectively produced by potentiostatic electrolysis.     

Electrochemical reduction of the dithiophosphate complexes CpFe(CO)2[η-SP(S)(OR)2], (Cp = η-C5H5 or η-C5Me5)

The reductive electrochemistry of compounds of the type CpFe(CO)₂L (Cp = η-C₅H₅, η-C₅Me₅; L = SP(S)(OEt)₂, SP(S)(OⁱPr)₂) has been examined by polarography, cylic voltammetry and coulometry. The first one-electron reduction step leads to a bond rupture process with formation of a mercury compound, [CpFe(CO)₂]₂Hg, at a mercury electrode and the corresponding dimer species at a platinum electrode. The second reduction step corresponds to the reduction of the dimer [CpFe(CO)₂]₂, except in the polarographic reduction of pentamethylcyclopentadienyl compounds.