在LiCl-KCl共晶熔体中电化学制备钬镍金属间化合物(英文)

采用循环伏安、方波伏安和开路计时电位等方法研究了Ho(Ⅲ)离子在LiCl-KCl共晶熔体中的电化学行为及Ho-Ni合金化机理。在惰性W电极上,Ho(Ⅲ)离子在-2.06 V(vs Ag/Ag Cl)发生电化学还原,该还原过程为3个电子转移的一步反应。与惰性W电极上的循环伏安相比,Ho(Ⅲ)离子在活性Ni电极的循环伏安曲线上还出现了3对氧化还原峰,是Ho与Ni形成了金属间化合物,导致了Ho(Ⅲ)离子在活性Ni电极发生了欠电位沉积。在不同的电位进行恒电位电解制备的3个不同的Ho-Ni合金,采用X-射线衍射(XRD)和扫描电子显微镜-能谱仪(SEM-EDS)等测试手段进行表征,结果表明:制备的3种合金分别是Ho2Ni17,Ho Ni5和Ho Ni23种合金化合物。     

Dy(Ⅲ)离子在LiCl-KCl熔盐中的电化学行为及Dy-Ni金属间化合物的选择性制备

采用循环伏安、方波伏安和开路计时电位等电化学方法研究了Dy(Ⅲ)离子在LiCl-KCl 共晶盐中的电化学行为及Dy-Ni 合金形成的电化学机理. 循环伏安和方波伏安法研究表明, Dy(Ⅲ)离子的电化学还原过程为三个电子转移的一步反应. 与惰性W电极相比, Dy(Ⅲ) 离子在Ni 电极上的循环伏安曲线多出了三对氧化还原峰,是由于Dy与Ni 形成了合金化合物, 导致Dy(Ⅲ)离子在活性Ni 电极发生了欠电位沉积. 采用X射线衍射(XRD)和扫描电子显微镜(SEM)附带能量散射谱(EDS)对恒电位(-1.6, -1.8 和-2.0 V)电解制备的Dy-Ni 合金进行分析, 分别获得了DyNi₅, Dy₂Ni₇和DyNi₂金属间化合物. 实验结果表明, 通过控制电位进行恒电位电解可以有选择性地制备不同的金属间化合物.     

Dy（III）离子在LiCl-KCl熔盐中的电化学行为及Dy-Ni金属间化合物的选择性制备

采用循环伏安、方波伏安和开路计时电位等电化学方法研究了Dy(III)离子在LiCl-KCl共晶盐中的电化学行为及Dy-Ni合金形成的电化学机理.循环伏安和方波伏安法研究表明, Dy(III)离子的电化学还原过程为三个电子转移的一步反应.与惰性W电极相比, Dy(III)离子在Ni电极上的循环伏安曲线多出了三对氧化还原峰,是由于Dy与Ni形成了合金化合物,导致Dy(III)离子在活性Ni电极发生了欠电位沉积.采用X射线衍射(XRD)和扫描电子显微镜(SEM)附带能量散射谱(EDS)对恒电位(-1.6,-1.8和-2.0 V)电解制备的Dy-Ni合金进行分析,分别获得了DyNi5, Dy2Ni7和DyNi2金属间化合物.实验结果表明,通过控制电位进行恒电位电解可以有选择性地制备不同的金属间化合物.     

LiCl-KCl熔盐体系中镨(Ⅲ)在镍电极上的电化学行为

采用循环伏安、方波伏安、计时电位和开路计时电位等电化学方法研究了Pr(Ⅲ)离子在共晶LiClKCl熔盐中Ni电极上的电化学行为及Pr-Ni合金化机理.结果表明,Pr(Ⅲ)离子的电化学还原过程为三电子转移的一步反应.与惰性Mo电极上的循环伏安曲线相比,Pr(Ⅲ)离子在活性Ni电极的循环伏安曲线上还出现了4对氧化还原峰,表明Pr(Ⅲ)离子在Ni电极上发生欠电位沉积,是由于生成不同的Pr-Ni金属间化合物.采用X射线衍射仪和扫描电子显微镜-能谱仪等对恒电位电解的产物进行了表征.结果表明,在不同电位下进行恒电位电解时,每个电位上只得到一种Pr-Ni金属间化合物,分别为Pr Ni2,Pr Ni3,Pr2Ni7和Pr Ni5.     

LiCl-KCl熔盐体系中镨(Ⅲ)在镍电极上的电化学行为

采用循环伏安、 方波伏安、 计时电位和开路计时电位等电化学方法研究了Pr(Ⅲ)离子在共晶LiCl-KCl熔盐中Ni电极上的电化学行为及Pr-Ni合金化机理. 结果表明, Pr(Ⅲ)离子的电化学还原过程为三电子转移的一步反应. 与惰性Mo电极上的循环伏安曲线相比, Pr(Ⅲ) 离子在活性Ni电极的循环伏安曲线上还出现了4对氧化还原峰, 表明Pr(Ⅲ)离子在Ni电极上发生欠电位沉积, 是由于生成不同的Pr-Ni金属间化合物. 采用X射线衍射仪和扫描电子显微镜-能谱仪等对恒电位电解的产物进行了表征. 结果表明, 在不同电位下进行恒电位电解时, 每个电位上只得到一种Pr-Ni金属间化合物, 分别为PrNi₂, PrNi₃, Pr₂Ni₇和PrNi₅.     

在LiCl-KCl-ZnCl2熔盐体系中电化学共还原提取钕

针对镧系元素钕,本文通过循环伏安、开路计时电位、方波伏安等方法研究了773 K时Nd（Ⅲ）在钼电极上在LiCl-KCl-ZnCl₂熔盐体系中的电化学行为及Zn-Nd合金的形成过程. 结果表明：在LiCl-KCl-ZnCl₂熔盐中,Nd（Ⅲ）在预先沉积的Zn 阴极上欠电位沉积形成三种Zn-Nd金属间化合物. 基于电化学行为研究,采用恒电位电解提取Nd并用方波伏安曲线测量来检测Nd（Ⅲ）离子浓度的变化,然后通过电解前后Nd（Ⅲ）离子浓度变化评估了Nd的电解提取效率. 实验结果表明：-1.84 V恒电位电解进行50 h后,Nd（Ⅲ）离子浓度接近于零,提取效率为99.67%. 在973 K时通过恒电流电解提取Nd并获得了Zn-Nd合金,通过X射线衍射（XRD）和扫描电子显微镜（SEM）附带能量散射谱（EDS）对合金的相组成和微观形貌进行了分析. XRD分析表明在Zn-Nd合金中存在Nd₂Zn₁₇,LiZn 和Zn相,EDS能谱分析表明Nd在合金中的原子分数高达14.99%.     

三维Ni(OH)2/Ni@N掺杂还原氧化石墨烯复合电极的制备及电催化析氢性能

采用脱合金结合两步水热法将3D Ni （OH）₂/Ni与N掺杂还原氧化石墨烯（rGO）结合,成功制备出3D花状Ni （OH）₂/Ni@NG复合电极。通过X射线衍射（XRD）、X射线光电子能谱（XPS）、扫描电子显微镜（SEM）和透射电子显微镜（TEM）表征其物相、价态分布及微观结构。在1 mol·L^-1 KOH溶液中测试其电催化析氢反应（HER）性能。结果表明：Ni （OH）₂/Ni的3D结构增加了电极的活性面积,与N掺杂rGO复合显著提高了电子/离子的传输速率,其过电位为108 mV （η₁₀）,Tafel斜率为114.9 mV·dec^-1,表现出良好的HER催化活性。1 000圈循环伏安法及计时电位法测试表明,Ni （OH）₂/Ni@NG电极均表现出良好的稳定性。     

Pr(III)离子在LiCl-KCl熔体中Bi膜W电极上的电化学行为（英文）

采用循环伏安、方波伏安、计时电位和开路计时电位等电化学方法研究了Pr(III)离子在Li Cl-KCl-Bi Cl_3熔体中W电极上的电化学行为。循环伏安和方波伏安的研究表明,Pr在预先沉积的Bi膜电极上发生欠电位沉积是由于生成了Pr-Bi金属间化合物,导致Pr(III)在Bi膜电极上的还原电位比在W电极上还原电位更正。从开路计时电位曲线可以观察到两相共存的Pr-Bi金属间化合物的两个平台。利用开路计时电位计算了723-873 K温度范围内Pr在Pr-Bi合金中的活度和偏摩尔Gibbs自由能以及Pr-Bi金属间化合物的生成Gibbs自由能。通过恒电位电解,在液态Bi电极上得到了Pr-Bi合金,并采用X射线衍射(XRD)和扫描电子显微镜(SEM)附带能量散射谱(EDS)对样品进行了表征,结果表明所得到的Pr-Bi金属间化合物为Pr Bi_2和Pr Bi。     

Pr(Ⅲ)离子在LiCl-KCl熔体中Bi膜W电极上的电化学行为

采用循环伏安、方波伏安、计时电位和开路计时电位等电化学方法研究了Pr（Ⅲ）离子在LiCl-KCl-BiCl₃熔体中W电极上的电化学行为。循环伏安和方波伏安的研究表明,Pr在预先沉积的Bi膜电极上发生欠电位沉积是由于生成了Pr-Bi金属间化合物,导致Pr（Ⅲ）在Bi膜电极上的还原电位比在W电极上还原电位更正。从开路计时电位曲线可以观察到两相共存的Pr-Bi金属间化合物的两个平台。利用开路计时电位计算了723-873 K温度范围内Pr在Pr-Bi合金中的活度和偏摩尔Gibbs自由能以及Pr-Bi金属间化合物的生成Gibbs自由能。通过恒电位电解,在液态Bi电极上得到了Pr-Bi合金,并采用X射线衍射（XRD）和扫描电子显微镜（SEM）附带能量散射谱（EDS）对样品进行了表征,结果表明所得到的Pr-Bi金属间化合物为PrBi₂和PrBi。     

Ni/NiCo2O4电极的制备及其析氧反应性能

采用溶胶-凝胶法制备NiCo₂O₄尖晶石粉体, 然后以多孔Ni 为基体, 通过复合溶胶涂覆结合烧结制备Ni/NiCo₂O₄ 涂层电极. 运用扫描电子显微镜(SEM)、能量色散谱(EDS)和X 射线衍射(XRD)表征粉体以及Ni/NiCo₂O₄涂层电极的组成和结构. 采用循环伏安(CV), 稳态极化(LSV), 电化学阻抗谱(EIS), 恒电位阶跃以及恒电位长时间电解研究涂层电极在5 mol·L^-1 KOH溶液中的电催化析氧反应(OER). 结果表明: Ni/NiCo₂O₄涂层电极与多孔Ni 电极对比, 具有低的析氧过电位、高的比表面积和高的稳定性能; 其中比表面积增大了28.69倍,表观活化能在不同过电位分别降低了166.78和162.15 kJ·mol^-1.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.