Broadband microwave absorption properties of polyurethane foam absorber optimized by sandwiched cross-shaped metamaterial

The effect of a sandwiched cross-shaped metamaterial absorber(CMMA) on microwave absorption properties of the double-layered polyurethane foam absorber(PUFA) is investigated. Combining with the sandwiched CMMA, the bandwidth of -10-dB reflection loss for PUFA is broadened from 7.4 GHz to 9.1 GHz, which is attributed to the overlap of two absorption peaks originating from CMMA and PUFA, respectively. The values of the two absorption peaks located at 10.15 GHz and 14.7 GHz are -38.44 dB and -40.91 dB, respectively. Additionally, distribution of surface current,electromagnetic field and power loss density are introduced to investigate the absorption mechanism of the CMMA. The electromagnetic field distribution of the double-layered PUFA and the three-layered hybrid absorber are comparatively analyzed to ascertain the influence of CMMA. The results show that the proposed hybrid absorber can be applied to the anti-electromagnetic interference and stealth technology.     

Optimization of electromagnetic matching of carbonyl iron/BaTiO3 composites for microwave absorption

Microwave absorbing materials filled with BaTiO₃ and carbonyl iron (CI) particles with various weight fractions (BaTiO₃/CI particles=100/0 to 0/100) are investigated. The dielectric and magnetic properties of the absorbers can be tuned by changing the weight ratio of BaTiO₃/CI particles in the frequency range of 2-18 GHz. Numerical simulations are also performed to design a single-layer and double-layer absorber. The minimum reflection loss of the composite filled with 20 wt% BaTiO₃ and 60 wt% CI particles at 2.0 mm thickness can be reached to −42 dB at 4.1 GHz. With the weight ratio of CI particles in the composite increased, the microwave absorption peak shifted to the lower frequency region. By using a double-layer absorber structure, the microwave absorption performance of the absorber is enhanced. The result shows that the total thickness of the absorber can be reduced below 1.4 mm by using a matching layer filled with 50 wt% BaTiO₃, and an absorption layer filled with 60 wt% BaTiO₃ and 20 wt% CI particles, whereas the reflection loss below −10 dB can be obtained in the frequency range of 10.8-14.8 GHz and the minimum reflection loss of −59 dB can be obtained at 12.5 GHz.     

Theoretical calculation and experiment of microwave electromagnetic property of Ni(C) nanocapsules

With the combination of the dielectric loss of the carbon layer with the magnetic loss of the ferromagnetic metal core,carbon-coated nickel Ni(C) nanoparticles are expected to be the promising microwave absorbers. Microwave electromagnetic parameters and reflection loss in a frequency range of 2 GHz–18 GHz for paraffin-Ni(C) composites are investigated.The values of relative complex permittivity and permeability, the dielectric and magnetic loss tangent of paraffin-Ni(C) composites are measured, respectively, when the weight ratios of Ni(C) nanoparticles are equal to 10 wt%, 40 wt%, 50 wt%,70 wt%, and 80 wt% in paraffin-Ni(C) composites. The results reveal that Ni(C) nanoparticles exhibit a peak of magnetic loss at about 13 GHz, suggesting that magnetic loss and a natural resonance could be found at that frequency. Based on the measured complex permittivity and permeability, the reflection losses of paraffin-Ni(C) composites with different weight ratios of Ni(C) nanoparticles and coating thickness values are simulated according to the transmission line theory. An excellent microwave absorption is obtained. To be proved by the experimental results, the reflection loss of composite with a coating thickness of 2 mm is measured by the Arch method. The results indicate that the maximum reflection loss reaches-26.73 d B at 12.7 GHz, and below-10 d B, the bandwidth is about 4 GHz. The fact that the measured absorption position is consistent with the calculated results suggests that a good electromagnetic match and a strong microwave absorption can be established in Ni(C) nanoparticles. The excellent Ni(C) microwave absorber is prepared by choosing an optimum layer number and the weight ratio of Ni(C) nanoparticles in paraffin-Ni(C) composites.     

微弧等离子喷涂碳纳米管/纳米Al2O3-TiO2复合涂层的吸波性能研究

将碳纳米管与纳米Al₂O₃-TiO₂陶瓷粉末超声共混制备了碳纳米管/纳米Al₂O₃-TiO₂复合粉末,测试了复合粉末在2—18GHz波段的电磁参数.研究表明：随着碳纳米管质量分数的增加,碳纳米管/纳米Al₂O₃-TiO₂复合粉末的复介电常数和损耗角不断增大.当碳纳米管质量分数和厚度增加时,复合粉末对电磁波的反射率峰值先增加后减小,而谐振频率不断向低频移动.采用微弧等离子喷涂制备了7wt%碳纳米管/纳米Al₂O₃-TiO₂复合吸波涂层,当厚度为1.5mm时,涂层最小反射率为-24.0dB,当厚度为2.0mm时,涂层小于-10dB的频带宽为3.60GHz,当温度为500℃高温时,1.0mm厚的涂层最小高温反射率为-12.2dB,小于-10dB频带宽为2.0GHz.复合涂层的实际厚度D与理论厚度d呈线关系：d=0.898D+0.515. 关键词： 等离子喷涂 碳纳米管 2O₃-TiO₂')" href="#">纳米Al₂O₃-TiO₂ 吸波性能     

Microwave absorption properties of one thin sheet employing carbonyl-iron powder and chlorinated polyethylene

To solve more and more serious electromagnetic interference problem, one thin microwave absorbing sheet employing carbonyl-iron powder (CIP) and chlorinated polyethylene (CPE) was prepared. The pattern, static magnetic properties and phase of CIP were characterized by scanning electron microscope (SEM), vibrating sample magnetometer (VSM) and X-ray diffraction (XRD), respectively. The electromagnetic parameters of CIP were measured in the frequency range of 2-18 GHz, and the electromagnetic loss mechanisms of the powder were discussed. The microwave absorption properties of composite sheets with different thicknesses and CIP ratios in matrix were investigated by measuring reflection loss (RL) in 2-18 GHz frequency range using the arch method. The results showed that appropriate CIP content and thickness could greatly improve microwave absorption properties in lower frequency range. For the sample with the weight ratio (CIP:CPE) of 16:1 and 1.5 mm thickness, the bandwidth (RL below −10 dB) achieved 1.1 GHz (2-3.1 GHz), and the minimum reflection loss value was obtained −13.2 dB at 2.2 GHz. This suggested that CIP/CPE composites could be applied as thin microwave absorbers in S-band (2-4 GHz).     

Absorption properties of carbonyl-iron/carbon black double-layer microwave absorbers

Double-layer materials were devised in order to improve the absorbing properties of electromagnetic wave absorbing plates. The double-layer wave absorbing materials are composed of a matching layer and an absorption layer. The matching layer is the surface layer through which most of the incident waves can enter, and the absorption layer beneath it plays an important role in incident wave attenuation. The total thickness of the double layer is the sum of the thicknesses of these two layers. Carbonyl iron (CI) and carbon black (CB) were used as absorbents in the matching and absorption layers, respectively. The structures of the CI and CB particles were analyzed using scanning electron microscopy and transmission electron microscopy; the dielectric properties and absorption mechanisms were also studied. In the testing frequency range 2-18 GHz, the results show that the double-layer absorbers have two absorption peaks, and the positions and values of these peaks change with the content level of the absorbents. When the mass fraction of CI in the matching layer is 50% and the total thickness of the absorber is 4 mm, the effective absorption band (below −8 dB) reaches 5.5, 5.8, and 6.5 GHz. Where the mass fraction of CB is 50% or 60% and the mass fraction of CI is 70%, the bandwidth with reflection loss below −4 dB is larger than 10 GHz.     

Enhancement of microwave absorption of nanocomposite BaFe_(12)O_(19)/α-Fe microfibers

Nanocomposite BaFe12O19/α-Fe microfibers with diameters of about 1-5 μm are prepared by the organic gelthermal selective reduction process. The binary phase of BaFe12O19 and α-Fe is formed after reduction of the precursor BaFe12O19/α-Fe2O3 microfibers at 350℃ for 1 h. These nanocomposite microfibers are fabricated from α-Fe (16-22 nm in diameter) and BaFe12O19 particles (36-42 nm in diameter) and basically exhibit a single-phase-like magnetization behavior, with a high saturation magnetization and coercive force arising from the exchange-coupling interactions of soft α-Fe and hard BaFe12O19 . The microwave absorption characteristics in a 2-18 GHz frequency range of the nanocomposite BaFe12O19/α-Fe microfibers are mainly influenced by their mass ratio of α-Fe/BaFe12O19 and specimen thickness. It is found that the nanocomposite BaFe12O19/α-Fe microfibers with a mass ratio of 1:6 and specimen thickness of 2.5 mm show an optimal reflection loss (RL) of 29.7 dB at 13.5 GHz and the bandwidth with RL exceeding 10 dB covers the whole Ku-band (12.4-18.0 GHz). This enhancement of microwave absorption can be attributed to the heterostructure of soft, nano, conducting α-Fe particles embedded in hard, nano, semiconducting barium ferrite, which improves the dipolar polarization, interfacial polarization, exchange-coupling interaction, and anisotropic energy in the nanocomposite BaFe12O19/α-Fe microfibers.     

基于密度泛函理论的5~10元瓜环结构参数与前线轨道的计算

在气相环境中,使用密度泛函理论（DFT）优化由n个苷脲单元组成的瓜环[n]（CB[n]）（n=5~10）,并使用密度泛函（DFT）概念指数和Multiwfn软件包计算和分析CB[n]的结构参数、前线轨道能量和化学稳定性.结果表明：α-N结构最稳定,α=O、γ-γ、γ-H和β-H（2）结构的化学稳定性较差;以CB[6]为界,主要二面角的变化呈现中心对称的形式;随着苷脲单元n的增加,CB[n]的端口直径、空腔直径和圆外径线性增大;前线轨道E_HOMO、E_LUMO值及E_LUMO-E_HOMO值逐渐降低,化学活性逐渐增强、稳定性逐渐减弱;端口O原子是最大的亲电活性位点,LUMO的电子云分布主要与H原子有关,且次甲基H原子对LUMO电子云的贡献最大;次甲基C原子、亚甲基C原子和指向CB[n]端口方向的亚甲基H原子对LUMO的电子云分布具有抑制作用,抑制能力的大小为指向CB[n]端口方向的亚甲基H原子>亚甲基C原子>次甲基C原子.为研究瓜环的超分子组装提供理论依据.     

Enhanced microwave absorption in ZnO/carbonyl iron nano-composites by coating dielectric material

The microwave absorption properties of zinc oxide/carbonyl iron composite nanoparticles fabricated by high energy ball milling were studied at 0-20 GHz. Experiments showed that ZnO as a kind of dielectric material coating carbonyl iron particles made the bandwidth of reflection loss (RL)<−5 dB expanding to the low frequency, and enhanced absorption effect obviously. For a 3 mm thickness absorber of ZnO/carbonyl iron after 30 h milling, the values of RL<−5 dB and RL<−8 dB were obtained in the frequency range from 7.0 GHz to 17.8 GHz and from 9.8 dB to 14.9 dB, respectively, and its strongest RL peak was −29.34 dB at 13.59 GHz. The magnetic loss of carbonyl iron particles and the dielectric loss of ZnO particles were the main mechanisms of microwave absorption for the composites.     

Preparation and microwave absorption properties of electroless Co-P-coated nickel hollow spheres

Co-P-coated nickel hollow spheres (NHSs) were prepared by electroless plating technology. The morphology and component content of Co-P coating varies with the change of sodium citrate concentration in elctroless plating solution. And as phosphorus content increases in coatings, resulting in smaller grain, coercivity of microspheres decreases. The microwave absorption properties of spheres-wax composite were investigated in the range of 2-18 GHz. Both permittivity and permeability increase with an increase of cobalt content in coatings. For composite layer, a minimal reflection loss (RL, −36.9 dB) of was predicted at 8.1 GHz with a thickness of 3 mm.     

M型钡铁氧体陶瓷微珠核壳腔结构吸波材料

利用自反应淬熄法制备了一种M型钡铁氧体空心陶瓷微珠材料,在此基础上,对其表面进行超声波化学镀Ni-Co复合层,从而形成了具有核/壳/腔结构的材料;通过扫描电子显微镜、能谱仪和X射线衍射仪分析表明,该材料具有中空结构,主要物相BaFe12O19为M型钡铁氧体,经过化学镀后,在其表面形成了一层Ni-Co复合层;经过吸波性能测试,化学镀Ni-Co复合层后,在2~18GHz范围内,当厚度为2.10mm时,最低反射率达到了-28.62dB,反射率小于-10dB的带宽为3.33GHz。     

Microwave absorption properties of a wave-absorbing coating employing carbonyl-iron powder and carbon black

To prevent serious electromagnetic interference, a single-layer wave-absorbing coating employing complex absorbents composed of carbonyl-iron powder (CIP) and carbon black (CB) with epoxy resin as matrix was prepared. The morphologies of CIP and CB were characterized by scanning electron microscope (SEM) and transmission electron microscope (TEM), respectively. The electromagnetic parameters of CIP and CB were measured in the frequency range of 2-18 GHz by transmission/reflection technology, and the electromagnetic loss mechanisms of the two particles were discussed, respectively. The microwave absorption properties of the coatings were investigated by measuring reflection loss (RL) using arch method. The effects of CIP ratio, CB content and thickness on the microwave absorption properties were discussed, respectively. The results showed that the higher thickness, CIP or CB content could make the absorption band shift towards the lower frequency range. Significantly, the wave-absorbing coating could be applied in different frequency ranges according to actual demand by controlling the content of CIP or CB in composites.     

Fabrication and electromagnetic performance of micro-tubular nanocomposites composed of monodisperse iron nanoparticles and carbon

Low density and thin thickness are essential for electromagnetic (EM) wave absorbers. In this study, we fabricated a novel micro-tubular iron nanocomposite (MTIC) that composed of carbon microtubes and monodisperse iron nanoparticles (NPs). The bulk density of MTIC is only 0.35±0.04 g cm⁻³ due to its micro-tubular structure. The presence of iron NPs increased the magnetic loss significantly and therefore enhanced the reflection loss (RL) of MTIC/paraffin composite. The optimum thickness for the composite is 1.5-1.8 mm, with maximum bandwidth of 7.6 GHz for RL<−5 dB and 3.6 GHz for RL<−10 dB. The corresponding frequency at this thickness is 10-18 GHz. Because of low density and broad bandwidth at thin thickness, MTIC is a promising light-weight absorber for EM wave absorption or microwave shielding. This study will also provide new ideas for fabricating microwave absorbers with low density and thin thickness.     

具有横向磁晶各向异性的钴纳米线的微波吸收性能

使用电化学脉冲沉积法制备了磁晶各向异性易磁化方向(c轴)垂直纳米线长轴方向的钴纳米线.受到磁晶各向异性、静磁相互作用等因素与形状各向异性相互竞争的结果,纳米线阵列的磁滞回线显示出较弱的磁各向异性.此外,在2—18 GHz频率范围内,纳米线/石蜡复合材料的介电色散谱的虚部在5 GHz处有一个主峰,在10 GHz附近有一个较弱的峰;德拜弛豫特性和材料的电导率对这两个峰的形成均有贡献.同时,其磁导率色散谱的虚部在频率为6.1 GHz处有一个主峰,在10 GHz以上有两个较微弱的峰. 前一个峰源于自 关键词： 钴纳米线 介电色散谱 磁导率色散谱 微波吸收剂     

A linear-to-circular polarization converter based on I-shaped circular frequency selective surfaces

In this paper, a linear-to-circular polarization converter using a three-layer frequency selective surface based on Ishaped circular structure resonant is presented and investigated. Numerical simulations exhibit that when the normal ypolarized waves impinge on this device propagating towards +z direction, the two orthogonal components of the transmitted waves have a 90° phase difference as well as the nearly equal amplitudes at the resonant frequency of 7.04 GHz, which means that the left-hand circular polarization is realized in transmission. For validating the proposed design, a prototype which consists of 25 × 25 elements has been designed, manufactured and measured. The measured results are in good agreement with the simulated ones, showing that the polarization conversion transmission is over-3 dB in the frequency range of 5.22–8.08 GHz and the axial ratio is below 3 dB from 5.86 GHz to 7.34 GHz.     

一种基于3D打印技术的结构型宽频吸波超材料

设计了一种三层宽频吸波超材料,其表层和中间层为单元尺寸不同的周期阵列结构,底层为吸波平板结构,优化后的总厚度仅为4.7 mm,并采用三维(3D)打印技术成功制备了该吸波超材料.吸波体反射率测试结果表明,在电磁波垂直入射条件下,宽频吸收峰分别出现在5.3和14.1 GHz,两峰叠加使得其在4-18 GHz频率范围内反射损耗均小于-10 dB.采用S参数反演法计算了每一层的等效电磁参数,并利用多层结构反射率公式推导得出该模型的理论反射率,理论计算结果与实测结果基本一致.通过研究能量损耗、电场分布和磁场分布揭示了吸波机理,分析表明该吸波体的宽频吸收效果源于三层结构产生的吸收带宽叠加.本文提出的吸波超材料具有良好的宽频吸收效果,尤其在低频范围吸波性能较佳,结合3D打印快速成型技术,可获得结构精细的三层吸波超材料,具有重要的实际应用价值和广阔的应用前景.     

Electromagnetic coupling reduction in dual-band microstrip antenna array using ultra-compact single-negative electric metamaterials for MIMO application

In this paper, an ultra-compact single negative(SNG) electric waveguided metamaterial(WG-MTM) is first investigated and used to reduce the mutual coupling in E H planes of a dual-band microstrip antenna array. The proposed SNG electric WG-MTM unit cell is designed by etching two different symmetrical spiral lines on the ground, and has two stopbands operating at 1.86 GHz and 2.40 GHz. The circuit size is very compact, which is only λ_0/33.6 ×λ_0/15.1(where λ_0 is the wavelength at 1.86 GHz in free space). Taking advantage of the dual-stopband property of the proposed SNG electric WG-MTM, a dual-band microstrip antenna array operating at 1.86 GHz and 2.40 GHz with very low mutual coupling is designed by embedding a cross shaped array of the proposed SNG electric WG-MTM. The measured and simulated results of the designed dual-band antenna array are in good agreement with each other, indicating that the mutual coupling of the fabricated dual-band antenna array realizes 9.8/11.1 d B reductions in the H plane, 8.5/7.9 d B reductions in the E plane at1.86 GHz and 2.40 GHz, respectively. Besides, the distance of the antenna elements in the array is only 0.35 λ_0(where λ_0 is the wavelength at 1.86 GHz in free space). The proposed strategy is used for the first time to reduce the mutual coupling in E H planes of the dual-band microstrip antenna array by using ultra-compact SNG electric WG-MTM.     

基于Franz-Keldysh效应的倏逝波锗硅电吸收调制器设计

本文设计了一种基于Franz-Keldysh (FK) 效应的GeSi电吸收调制器. 调制器集成了脊形硅单模波导. 光由脊形硅波导以倏逝波形式耦合进锗硅吸收层. 在硅基锗二极管FK效应实验测试的基础上, 有源区调制层锗硅中的硅组分设计为1.19%, 从而使得器件工作在C (1528–1560 nm) 波段. 模拟结果显示该调制器的3 dB带宽可达64 GHz, 消光比为8.8 dB, 而插损仅为2.7 dB. 关键词： 锗硅 调制器 电光集成     

Attractive microwave absorption and the impedance match effect in zinc oxide and carbonyl iron composite

The flower-like ZnO and ZnO/carbonyl-iron composite have been prepared by a sonochemical route and ball-milling process, respectively. For ZnO/carbonyl-iron composite, a reflection loss (RL) exceeding −20 dB was obtained in a broad frequency range of 8.4-17.9 GHz with a thin thickness of 1.2-2.3 mm. An optimal RL of −61 dB was found at 11.7 GHz for an absorber thickness of 1.91 mm. It is demonstrated that the attractive microwave-absorption properties are a consequence of a proper electro-magnetic impedance match and geometrical cancellation at the air-material interface. In addition, an impedance mismatch function was proposed, which provides an effective method to determine the microwave absorbing properties from the intrinsic materials constants. The calculated value of matching frequency and thickness is well consistent with the experimental data. The method also provides a simple theoretical graphic aid for determining the absorption characteristics and the location of the matching conditions in the frequency domain.     

基于电阻型频率选择表面的宽带雷达超材料吸波体设计

将多边开缝式电阻型频率选择表面 (frequency selective surface, FSS)与传统的磁性吸波材料(radar absorption materials, RAM)复合, 提出了一种新型吸波体模型. 在分析该模型材料结构和拓扑结构的基础上, 得到等效电路模型; 基于传输线理论获得该模型的反射率及输入阻抗. 采用CST仿真软件对电阻型FSS与无电阻型FSS进行对比仿真, 通过分析吸波效率, 结果表明电阻型FSS在8.7 GHz附近具有更加优良的吸波性能, 实物测试结果与仿真结果一致. 同时FSS复合传统的磁性吸波材料RAM 产生了拓频效果, 在8–15 GHz范围内起到全频段吸收.