Improvement in the light conversion efficiency of silicon solar cell by spin coating of CuO,ZnO nanoparticles and CuO/ZnO mixed metal nanocomposite material

Synthesis of pure Zinc oxide (ZnO), Copper oxide (CuO) nanoparticles (NPs) and their (ZnO/CuO) nanocomposites (NCs) in 1:1 M ratio were successfully prepared by co-precipitation method. The structural properties of the as synthesized nanoparticles and nanocomposite materials were investigated using scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX) and X-ray diffraction (XRD) techniques. Optical band-gap studies were done using UV–Visible absorption spectroscopy. Photovoltaic properties of pure ZnO NPs, CuO NPs and ZnO/CuO NCs coated over a single-crystalline silicon solar cell were carried out to compare improvement of light-conversion efficiency in coated solar cell. The maximum light conversion efficiencies were found to be of 8.02% for CuO (3 mg/ml concentration) and 7.28% for ZnO NPs (3 mg/ml concentration), whereas that of mixed metal nanocomposite CuO/ZnO NCs was found to be 7.62%. at very low concentration of 1 mg/ml. This indicates with low concentration of mixed metal NCs an improvement in light efficiency can be obtained. The enhancement in efficiency could be due to formation of p - n heterojunction by CuO/ZnO NCs composites which enhances the number of electrons and holes participating in conduction on the surface.     

Modification of poly(benzimidazole‐amide) nanocomposites by the incorporation of amine‐functionalized ZnO nanoparticles: Thermal and morphological characterization

Fabrication, characterization, and properties of novel poly(benzimidazole‐amide)/functionalized ZnO nanocomposites (PBIA/APS‐ZnO NCs) were investigated. At first, an aromatic PBA containing 3 imidazole units per repeat unit was synthesized by direct polycondensation of 1,3‐bis(5‐carboxylic acid‐2‐benzimidazole)benzene (BCAB) with 5‐(2‐benzimidazole)‐1,3‐phenylenediamine (DAMI) with good yield as a polymeric matrix. The periphery of zinc oxide nanoparticles (ZnO NPs) was modified with 3‐aminopropyltriethoxysilane (APS) to have a better dispersion NPs and enhancing interactions between nanoparticles and PBIA matrix. Different percentages of functionalized NPs (0, 4, 8, and 12 wt.%) were then embedded in PBA matrix through ultrasonic irradiation technique. Fourier transform infrared and thermo‐gravimetric analysis (TGA) confirmed that APS was successfully attached on the ZnO NP surface. The obtained NCs were characterized by means of Fourier transform infrared, X‐ray diffraction, scanning electron microscopy, and TGA. The TGA of the PBIA/APS‐ZnO NCs showed the enhancement in the thermal stability in comparison with the neat PBIA and that this increase is higher when the NP content increases. Scanning electron microscopy analyses of NCs revealed that the dispersion of APS‐ZnO NPs was uniformly done in the PBIA matrix.     

Ultrasonic treatment as recent and environmentally friendly route for the synthesis and characterization of polymer nanocomposite having PVA and biosafe BSA‐modified ZnO nanoparticles

The present study deals with the immobilization of ZnO nanoparticles (NPs) as nanofiller inside poly(vinyl alcohol) (PVA) by solution casting method which is a low‐cost, environmental‐friendly, and rapid method of sonochemistry. Firstly, the surface of ZnO NPs was treated by bovine serum albumin (BSA) in the phosphate‐buffered solution under ultrasonic cavitation. Three diverse polymeric nanocomposites (NCs) are formed by changing the percentage of ZnO@BSA NPs (3, 6, and 9 wt%) with same amount of PVA. The structure properties, morphology, and thermal stability of prepared NCs were determined through Fourier transform‐infrared spectroscopy, X‐ray diffraction, energy‐dispersive X‐ray spectroscopy (EDX) and optical UV‐Visible spectrum, transmission electron microscopy (TEM), and field emission scanning electron microscopy. The presence and the dispersal of the ZnO@BSA NPs in the PVA matrix were recognized by TEM. In the X‐ray diffraction analysis, the values of mean particle size using Debye‐Scherrer equation were estimated in the range 4 to 6 nm that is almost in agreement with TEM analysis. Increase of 14% in thermal stability and also increase of more than 2‐fold of the tensile strength of PVA/ZnO@BSA NC 9 wt% in respect to the pure PVA showed that the modified NPs well dispersed within PVA and attached to it.     

Synthesis of CuS and ZnO/Zn(OH)2 nanoparticles and their evaluation for in vitro antibacterial and antifungal activities

In this study, the copper sulfide nanoparticles (CuS‐NPs) and the zinc oxide/zinc hydroxide nanoparticles ((ZnO/Zn(OH)₂‐NPs) were synthesized by a simple and low‐cost method, and the synthesized nanoparticles were characterized and identified by UV–Vis, field emission scanning electron microscopy (FE‐SEM), transmission electron microscopy (TEM) and X‐ray diffraction (XRD). The antimicrobial activity of the CuS‐NPs and the ZnO/Zn(OH)₂‐NPs were examined by broth dilution to determine the minimal inhibitory concentration (MIC) of antibacterial agent required to inhibit the growth of a pathogen and the minimum bactericidal concentration (MBC) required to kill a particular bacterium. Agar disc diffusion method was used to determine the zone of inhibition. The nanoparticles demonstrated potent antibacterial activity against Klebsiella pneumonia (ATCC 1827), Acinetobacter baumannii (ATCC 150504), Escherichia coli (ATCC 33218) and Staphylococcus aureus (ATCC 25293). Antifungal activity against Aspergillus oryzae (PTCC 5164) was also obtained. The data obtained from antimicrobial activities by broth dilution and agar disc diffusion methods exhibited the CuS‐NPs were more effective than the ZnO/Zn(OH)₂‐NPs. A good correlation was observed between the data obtained by both methods.     

Design Rules for Self‐Assembly of 2D Nanocrystal/Metal–Organic Framework Superstructures

We demonstrate the guiding principles behind simple two dimensional self‐assembly of MOF nanoparticles (NPs) and oleic acid capped iron oxide (Fe₃O₄) NCs into a uniform two‐dimensional bi‐layered superstructure. This self‐assembly process can be controlled by the energy of ligand–ligand interactions between surface ligands on Fe₃O₄ NCs and Zr₆O₄(OH)₄(fumarate)₆ MOF NPs. Scanning transmission electron microscopy (TEM)/energy‐dispersive X‐ray spectroscopy and TEM tomography confirm the hierarchical co‐assembly of Fe₃O₄ NCs with MOF NPs as ligand energies are manipulated to promote facile diffusion of the smaller NCs. First‐principles calculations and event‐driven molecular dynamics simulations indicate that the observed patterns are dictated by combination of ligand–surface and ligand–ligand interactions. This study opens a new avenue for design and self‐assembly of MOFs and NCs into high surface area assemblies, mimicking the structure of supported catalyst architectures, and provides a thorough fundamental understanding of the self‐assembly process, which could be a guide for designing functional materials with desired structure.     

Preparation and characterization of poly(amide-imide)/ZnO nanocomposites containing pendent benzoxazole and benzimidazole segments

In the present investigation, novel poly(amid-imide)/zinc oxide nanocomposites (PAI/ZnO NCs) containing benzoxazole and benzimidazole pendent groups with different amounts of modified zinc oxide nanoparticles (ZnO NPs) were successfully prepared via the ex situ method. Poly(amid-imide) (PAI) was prepared by direct polycondensation of 2-[3,5- bis(N-trimellitimidoyl)phenyl]benzoxazole (DCA) with 5-(2-benzimidazole)-1,3-phenylenediamine (DAMI) and provided the polymeric matrix with well-designed groups. The surface of ZnO NPs was functionalized with 3-aminopropyltriethoxysilane (APS) coupling agent to have a better dispersion and enhancing possible interactions of NPs with functional groups of polymer matrix. The amount of APS bonded to the ZnO surface was determined by thermogravimetric analysis. PAI/ZnO nanocomposites were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM). SEM analysis showed that the modified ZnO nanoparticles were homogeneously dispersed in polymer matrix. In addition, TGA data indicated an enhancement of thermal stability of the nanocomposite compared with the neat polymer.     

Green synthesis,characterization, and biological activities of saffron leaf extract-mediated zinc oxide nanoparticles: A sustainable approach to reuse an agricultural waste

To increase the profitability and sustainability of agricultural waste, a facile green approach was established to synthesize zinc oxide nanoparticles (ZnO NPs) using saffron leaf extract as a reducing and stabilizing agent. Structural characteristics of NPs were investigated by X-ray diffraction (XRD), Fourier-transform infrared (FTIR), field emission scanning electron microscopy (FESEM), and UV–Visible (UV–Vis) spectroscopy. Characterization results revealed that ZnO NPs is highly crystalline with a hexagonal wurtzite structure and spherical particles with diameter less than 50 nm, as confirmed by XRD and FESEM techniques. UV–Vis absorption spectra depicted an absorption peak at 370 nm, which confirms the formation of ZnO NPs. FTIR spectral analysis confirmed the presence of functional groups and metal oxygen groups. The biological activities of ZnO NPs were also investigated. The antibacterial effect of ZnO NPs was investigated against selected food pathogens (Salmonella Typhimurium, Listeria monocytogenes, and Enterococcus faecalis). The study results prove that the green synthesized ZnO NPs show enhanced antibacterial activity against S. Typhimurium when compared with other strains. A dose-dependent free radical scavenging activity was observed for ZnO NPs in both 2,2-diphenyl-1-picryl-hydrazyl-hydrate (DPPH) and fluorescence recovery after photobleaching (FRAP) assays. The ZnO NPs were evaluated for their photocatalytic activity during the degradation of methylene blue (MB) dye in aqueous solutions. The maximum removal of MB achieved was 64% with an initial ZnO NP concentration of 12 mg/mL under UV light. The present study revealed that the agricultural waste (saffron leaf) provides a simple and eco-friendly option to sustainably synthesize ZnO NPs for use as a photocatalyst. In addition, this is the first report on saffron leaf-mediated synthesis of ZnO NPs.     

Polyethylene-based nanocomposite: Structure and properties of poly(vinyl alcohol)/organofunctionalized Mg-doped fluorapatite hybrid

We report here the production and characterization of polymer nanocomposites (NC)s containing nanoceramics of organofunctionalized Mg-doped fluorapatite (MDFA) in a poly(vinyl alcohol) matrix. First, the MDFA materials were functionalized with N-trimellitylimido-L-leucine modifier through ultrasonic irradiation. The numerous experimental techniques like Fourier transform infrared spectroscopy, X-ray diffraction, atomic force microscopy, field emission scanning electron microscopy, transmission electron microscopy, and thermogravimetric analysis were applied to characterize the prepared materials. Thermal analysis of the obtained NCs showed an increase in thermal stability of the NCs when compared to the neat macromolecule.     

Comprehensive study on reinforcement of poly(vinyl chloride) nanocomposite films with ZnO nanoparticles modified by citric acid and vitamin C

We reported a general facile approach for modifying NPs and incorporating them into PVC polymer via ultrasonic irradiation. ZnO nanoparticles (NP)s modified with ascorbic acid (AS) and citric acid (CA) were employed to investigate the agglomeration behavior under poly(vinyl chloride) PVC matrix. To compare and determine the suitable construction, the prepared PVC/ZnO-CA-AS NCs (4, 8, 12?wt%) were characterized. UV-visible measurements indicate, increasing absorption value results in an increase of ZnO content. According to the obtained information from the TGA of the NCs, further increases in modified ZnO results in an increase in flame-retardancy. The mechanical properties investigation revealed improvement of the elongation at maximum stress.     

A comparative study on the mode of interaction of different nanoparticles during MALDI‐MS of bacterial cells

We propose the benefits of preincubation during nanoparticle‐assisted bacterial analysis, where the bacteria are grown along with the nanoparticles. We were able to obtain a two to ten fold enhancement of bacterial signals in 3 h compared to the generally used methodology followed in previous literature. The previous literature method required a long time (18 h) to obtain such an enhancement. We probe the interactions of two bacteria, Staphylococcus aureus and Pseudomonas aeruginosa, with Ag, NiO, Pt TiO₂ and ZnO nanoparticles via transmission electron microscopy, ultraviolet spectroscopy and matrix‐assisted laser desorption/ionization (MALDI) mass spectrometry (MS). Based on these results, we propose a mechanism for interaction of these five nanoparticles with bacteria. Two mechanisms were observed for the interactions: (1) Mechanism A is proposed for the Pt and NiO NPs which functioned based on affinity for bacterial cells. (2) Mechanism B was proposed for the bactericidal NPs such as TiO₂, ZnO and Ag NPs. The results indicate that the success of the unmodified NPs in MALDI‐MS bacterial studies lies in following the ideal protocol for incubation at the ideal concentrations. Copyright © 2013 John Wiley & Sons, Ltd.     

Green synthesis of RGO-ZnO mediated Ocimum basilicum leaves extract nanocomposite for antioxidant,antibacterial, antidiabetic and photocatalytic activity

Green chemistry of nanomaterials from synthesis to diverse biomedical applications is a discussion of town in the current scientific scenario. In this work, Ocimum basilicum leaves extract was utilized as the reducing agent in the synthesis of ZnO nanoparticles. Green synthesized ZnO NPs mediated via Ocimum basilicum extract were decorated on the reduced graphene oxide (RGO) sheet by the simple one-step method. The prepared green synthesized RGO-ZnO nanocomposites (NCs) were characterized via the X-ray diffractometer. The average crystallite size of ZnO was 25 nm which confirmed the wurtzite hexagonal structure of ZnO. The scanning Electron Microscopy technique confirmed the spherical morphology of particle size of 31 nm. Further, Fourier Transform Infrared Spectroscopy confirms the Zn-O bond stretching in the RGO-ZnO NCs. Antioxidant activity of the green synthesized Ocimum basilicum ZnO NPs and RGO-ZnO NCs were performed by DPPH scavenging activities and found the dose-dependent. RGO-ZnO effectively inhibited the α-amylase and α-glucosidase for in vitro antidiabetic activities. Moreover, RGO-ZnO NCs showed the antibacterial potential with increasing concentration against the gram-positive (Cocci) and gram-negative (E. coli) bacterial strains. In Photocatalytic activity, the ZnO NPs and RGO-ZnO NCs were utilized as the catalyst and degraded the Rh-B dye 91.4% and 96.7% under UV–visible light. Overall, RGO-ZnO NCs showed better results in antibacterial, antidiabetic activity as well as photocatalytic activity against the pure ZnO NPs. Hence, RGO-ZnO nanocomposites have demonstrated the opportunity to be an entrancing material for photocatalysis and biological studies.     

Green synthesis of silver nanoparticles using Thymus kotschyanus extract and evaluation of their antioxidant,antibacterial and cytotoxic effects

Present study used ecofriendly, cost efficient and easy method for synthesis of silver nanoparticles (Ag NPs) at the room temperature by Thymus Kotschyanus extract as reducing and capping agent. Various analytical technique including UV–Vis absorption spectroscopy determined presence of Ag NPs in the solution, the functional groups of Thymus Kotschyanus extract in the reduction and capping process of Ag NPs are approved by FT‐IR, crystallinity with the fcc plane approved from the X‐ray diffraction (XRD) pattern, energy dispersive spectroscopy (EDS) determined existence of elements in the sample, surface morphology, diverse shapes and size of present Ag NPs were showed by using scanning electron microscopy (SEM), atomic force microscopy (AFM) and high resolution transmission electron microscopy (HRTEM). Beginning and end destroy temperature of present silver nanoparticles were determined by thermal gravimetric spectroscopy (TGA). In addition, antibacterial, antioxidant and cytotoxicity properties of Ag NPs were studied. Agar disk and agar well diffusion are the methods to determined antibacterial properties of synthesized Ag NPs. Also MIC (Minimum Inhibitory Concentration) and MBC (Minimum Bactericidal Concentration) were recognized by macro broth dilution assay. DPPH free radical scavenging assay was used for antioxidant property and compare to butylated hydroxytoluene (BHT) as standard antioxidant that showed high antioxidant activity more than BHT. Synthesized Ag NPs have great cell viability in a dose depended manner and demonstrate that this method for synthesis silver nanoparticles provided nontoxic. The average diameter of synthesized Ag NPs was about 50–60 nm.     

Towards Organized Hybrid Nanomaterials at the Air/Water Interface Based on Liquid‐Crystal/ZnO Nanocrystals

The ability to self‐assemble nanosized ligand‐stabilized metal oxide or semiconductor materials offers an intriguing route to engineer nanomaterials with new tailored properties from the disparate components. We describe a novel one‐pot two‐step organometallic approach to prepare ZnO nanocrystals (NCs) coated with deprotonated 4‐(dodecyloxy)benzoic acid (i.e., an X‐type liquid‐crystalline ligand) as a model LC system (termed ZnO‐LC1 NCs ). Langmuir and Langmuir–Blodgett films of the resulting hybrids are investigated. The observed behavior of the ZnO NCs at the air/water interface is rationalized by invoking a ZnO‐interdigitation process mediated by the anchored liquid‐crystalline shell. The ordered superstructures form according to mechanism based on a Z nO‐ i nterdigitation p rocess mediated by l iquid c rystals (termed ZIP‐LC). The external and directed force applied upon compression at the air/water interface and the packing of the ligands that stabilize the ZnO cores drives the formation of nanorods of ordered internal structure. To study the process in detail, we follow a nontraditional protocol of thin‐film investigation. We collect the films from the air/water interface in powder form ( ZnO‐LC1 LB ), resuspend the powder in organic solvents and utilize otherwise unavailable experimental techniques. The structural and physical properties of the resulting superlattices were studied by using electron microscopy, atomic force microscopy, X‐ray studies, dynamic light scattering, thermogravimetric analysis, UV/Vis absorption, and photoluminescence spectroscopy.     

Application of CuO nanoparticles modified with vitamin B1 for the production of poly(vinyl alcohol)/CuO nanocomposite films with enhanced optical,thermal and mechanical properties

In this Investigation, the CuO nanoparticles (NPs) were treated by vitamin B₁ as a biomolecule modifier. The CuO NPs were used as an appropriate filler for fabrication of poly(vinyl alcohol) (PVA) nanocomposites (NCs). Then, NCs with various ratios (3, 5, and 7wt%) of modified CuO were fabricated under ultrasonic irradiation and their properties were compared with pure PVA. Several techniques were used for characterization of NCs. Field emission scanning electron microscopy and transmission electron microscopy analysis indicated that NPs have proper compatibility with the PVA matrix. Thermal gravimetric analysis results confirmed that NCs displayed higher thermal stability than neat PVA. Also, the addition of the NPs into the PVA matrix improved the optical and mechanical behaviors. Finally, the contact angle measurements verified that the hydrophilicity decreased for different ratios of modified NPs loaded in the polymer matrix. Copyright © 2017 John Wiley & Sons, Ltd.     

Facile and green methodology for surface‐grafted Al2O3 nanoparticles with biocompatible molecules: preparation of the poly(vinyl alcohol)@poly(vinyl pyrrolidone) nanocomposites

The present work describes preparation of modified alumina with biocompatible, water soluble, and treating agents such as citric acid and ascorbic acid. Also, the influence of the modified nanoparticles (NPs) into the blend of poly(vinyl alcohol)@poly(vinyl pyrrolidone) (50/50) matrix was studied. At first, citric acid and ascorbic acid as environmental friendly agents were grafted on the surface of Al₂O₃ NPs. Then, nanocomposites (NCs) with different amounts of modified Al₂O₃ NPs were prepared via a simple ultrasonic method. The characterizations of the molecular structure of the NCs specified that chemical and physical interactions happened between inorganic and organic counterparts. The mutual effect of modified NPs into the polymer matrix was investigated on the structural, interfacial interaction, thermal stability, and optical properties. The results from morphological characterization confirmed changes in morphology of poly(vinyl alcohol) and poly(vinyl pyrrolidone) after loading NPs. Uniform dispersion of modified spherical Al₂O₃ NPs powders into the matrix of 50/50 polymers was detected by field emission scanning electron microscopy and energy‐dispersive X‐ray. Adding M‐NPs into the polymer matrix expressively improved the thermal stability of NCs. Peaks in ultraviolet–visible spectra were shifted to the higher absorption. Copyright © 2017 John Wiley & Sons, Ltd.     

Surface treatment of nano ZnO using 3,4,5,6-tetrabromo-N-(4-hydroxy-phenyl)-phthalamic acid as novel coupling agent for the preparation of poly(amide–imide)/ZnO nanocomposites

Technological developments during the last century have led to the use of materials that inhibit or resist the spread of fire, because modern world with the increase in electronic products presents a greater risk of fire dangers. In line with this goal, a novel modifier containing bromine elements with flame retardancy potential for the surface modification of ZnO nanoparticles was produced from the reaction between tetrabromophthalic anhydride and p-aminophenol. For the synthesis of nanocomposites (NCs), the modified ZnO was embedded in the poly(amide–imide) (PAI) matrix under ultrasonic conditions. Samples were characterized by Fourier transform infrared, thermogravimetric analysis (TGA), X-ray diffraction, transmission electron microscopy, field emission scanning electron microscopy and UV-visible (UV/Vis) techniques. TGA results indicated that the addition of modified ZnO into the PAI matrix increases in the thermal decomposition temperatures of the obtained NCs and that the UV/Vis absorbance of NCs was examined and displayed better UV-protection property than the pure PAI.     

ZnO nanopowders and their excellent solar light/UV photocatalytic activity on degradation of dye in wastewater

Low-cost and scalable preparation,high photocatalytic activity,and convenient recycle of Zn O nanopowders(NPs)would determine their practical application in purifying wastewater.In this contribution,ZnO NPs were scalably synthesized via the simple reaction of Zn powder with H_2O vapor in autoclave.The structural,morphological and optical properties of the samples were systematically characterized by X-ray diffraction,scanning electron microscopy,Fourier transform infrared spectra,transmission electron microscopy,Micro-Raman,photoluminescence,and ultraviolet-visible spectroscopy.The as-prepared Zn O NPs are composed of nanoparticles with 100–150 nm in diameter,and have a small Brunauer-Emmett-Teller surface area of 6.85 m~2/g.The formation of Zn O nanoparticles is relative to the peeling of H_2 release.Furthermore,the product has big strain-stress leading to the red-shift in the band gap of product,and shows a strong green emission centered at 515 nm revealing enough atomic defects in Zn O NPs.As a comparison with P25,the obtained dust gray Zn O NPs have a strong absorbance in the region of 200–700 nm,suggesting the wide wave-band utilization in sunlight.Based on the traits above,the Zn O NPs show excellent photocatalytic activity on the degradation of rhodamine B(Rh-B)under solar light irradiation,close to that under UV irradiation.Importantly,the Zn O NPs could be well recycled in water due to the quick sedimentation in themselves in solution.The low-cost and scalable preparation,high photocatalytic activity,and convenient recycle of Zn O NPs endow themselves with promising application in purifying wastewater.     

Facile synthesis,characterization, and decolorization activity of Mn2+ and Al3+ co-doped hexagonal-like ZnO nanostructures as photocatalysts

A good photocatalyst with high efficiency can be synthesized easily using eco-friendly materials and processes. Our synthesized samples exhibit all of the aforementioned features. In this work, manganese co-doped ZnO at different weight percentages (3, 6, 9, and 15 wt.%) with and without 1.5 wt.% aluminum was synthesized by hydrothermal method, and their photocatalytic activity in aqueous solutions of methyl orange (MO) was investigated under visible light. The structural and optical properties of the samples were characterized using X-ray powder diffraction, Fourier-transform infrared spectroscopy, scanning electron microscopy, energy-dispersive X-ray analysis, and diffuse reflectance spectroscopy. In this work, Mn²⁺ ions in the 9%Mn/ZnO sample and Mn²⁺, Al³⁺ ions in the (9%Mn, 1.5%Al)/ZnO sample calcined at 800 °C were replaced instead with some Zn²⁺ ions in hexagonal wurtzite structures of ZnO. These structures were found next to each other in the form of a hexagonal shape that created 3D-hexagonal-like ZnO nanostructures. Finally, nanoparticles (NPs) and nano hexagonal-like ZnO nanostructures were, respectively, dispersed on the surface of 3D-hexagonal-like structure of 9%Mn/ZnO and (9%Mn, 1.5%Al)/ZnO. Diffuse reflectance spectroscopy analysis showed that the (9%Mn, 1.5%Al)/ZnO sample had more light absorption than 9%Mn/ZnO. However, contrary to our expectations, the 9%Mn/ZnO sample had better decolorization efficiency (94%) after 60 min under visible light, which could be attributed to a significant increase in the level of recombination by the aluminum ions.     

The surface modification of spherical ZnO with Ag nanoparticles: A novel agent,biogenic synthesis,catalytic and antibacterial activities

Nowadays, the industrial wastewater pollutants including toxic dyes and pathogenic microbes have caused serious environmental contaminations and human health problems. In the present study, eco-friendly and facile green synthesis of Ag modified ZnO nanoparticles (ZnO-Ag NPs) using Crataegus monogyna (C. monogyna) extract (ZnO-Ag@CME NPs) is reported. The morphology and structure of the as-biosynthesized product were characterized by field emission scanning electron microscopy (FESEM), X-Ray diffraction (XRD), differential reflectance spectroscopy (DRS), dynamic light scattering (DLS), transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FT-IR), and energy-dispersive X-ray spectroscopy (EDS) techniques. TEM and FESEM images confirmed the oval and spherical-like structure of the products with a size of 55–70 nm. The EDS analysis confirmed the presence of Zn, Ag, and O elements in the biosynthesized product. The photocatalytic results showed ZnO-Ag@CME NPs were degraded (89.8% and 75.3%) and (94.2% and 84.7%) of methyl orange (MO) and basic violet 10 (BV10), under UV and sunlight irradiations, respectively. The Ag modified ZnO nanoparticles exhibited enhanced catalytic activity towards organic pollutants, and showed better performance than the pure ZnO nanoparticles under UV and sunlight irradiations. This performance was probably due to the presence of silver nanoparticles as a plasmonic material. Antibacterial activity was performed against different bacteria. ZnO-Ag@CME NPs showed high antibacterial activity against K. pneumoniae, S. typhimurium, P. vulgaris, S. mitis, and S. faecalis with MIC values of 50, 12.5, 12.5, 12.5, and 12.45 µg/mL, respectively. All in all, the present investigation suggests a promising method to achieve high-efficiency antibacterial and catalytic performance.     

Binary Au/MWCNT and Ternary Au/ZnO/MWCNT Nanocomposites: Synthesis,Characterisation and Catalytic Performance

Gold nanoparticles of 10–24 and 5–8 nm in size were obtained by chemical citrate reduction and UV photoreduction, respectively, on acid‐treated multiwalled carbon nanotubes (MWCNTs) and on ZnO/MWCNT composites. The shape and size of the deposited Au nanoparticles were found to be dependent upon the synthetic method used. Single‐crystalline, hexagonal gold particles were produced in the case of UV photoreduction on ZnO/MWCNT, whereas spherical Au particles were deposited on MWCNT when the chemical citrate reduction method was used. In the UV photoreduction route, n‐doped ZnO serves as the e^? donor, whereas the solvent is the hole trap. All materials were fully characterised by UV/Vis spectroscopy, scanning electron microscopy, transmission electron microscopy, X‐ray photoelectron spectroscopy, Raman spectroscopy and BET surface analysis. The catalytic activity of the composites was studied for the selective hydrogenation of α,β‐unsaturated carbonyl compound 3,7‐dimethyl‐2,6‐octadienal (citral). The Au/ZnO/MWCNT composite favours the formation of unsaturated alcohols (selectivity=50 % at a citral conversion of 20 %) due to the presence of single‐crystalline, hexagonal gold particles, whereas saturated aldehyde formation is favoured in the case of the Au/MWCNT nanocomposite that contains spherical gold particles.