菲涅耳透镜的制作及性能分析(对准误差的影响)

我们使用薄膜沉积法制作16阶菲涅耳透镜,其衍射效率接近87%.用它代替常规的光学透镜可实现系统的轻量化、小型化、增加系统设计的自由度.在标量衍射理论的基础上,应用菲涅耳公式和傅里叶变换分析SiO₂薄膜和基底的表面反射、对准误差以及入射角对16阶菲涅耳透镜衍射效率的影响.     

线宽误差对菲涅耳透镜衍射效率的影响

基于标量衍射理论,首先得出存在线宽误差情况下4阶菲涅耳透镜衍射效率的解析式;并以 4阶、8阶和16阶菲涅耳透镜为例,进行计算机模拟计算并系统分析线宽误差对菲涅耳透镜衍射效率的影响。通过实验测量16阶菲涅耳透镜的线宽误差,分析其对16阶菲涅耳透镜衍射效率的影响。模拟计算结果对多阶菲涅耳透镜的制作提供重要的理论指导。     

基于紫外纳米压印的菲涅耳透镜制作

针对传统聚光系统中菲涅耳透镜成本较高并且光强分布不均匀的弊端,提出了利用紫外纳米压印技术制作菲涅耳透镜的方法.利用几何光学的光线追迹理论,设计了菲涅耳透镜模具.采用自行研制的紫外纳米压印系统对模具进行压印,紫外曝光后制得薄膜菲涅耳透镜.在太阳光下进行了测试,测试结果表明,低成本、高聚光倍数和光强分布均匀的菲涅耳透镜是可以实现的.     

基于紫外纳米压印的菲涅耳透镜制作

针对传统聚光系统中菲涅耳透镜成本较高并且光强分布不均匀的弊端,提出了利用紫外纳米压印技术制作菲涅耳透镜的方法.利用几何光学的光线追迹理论,设计了菲涅耳透镜模具.采用自行研制的紫外纳米压印系统对模具进行压印,紫外曝光后制得薄膜菲涅耳透镜.在太阳光下进行了测试,测试结果表明,低成本、高聚光倍数和光强分布均匀的菲涅耳透镜是可以实现的.     

大数值孔径衍射透镜的优化设计方法

本文针对大数值孔径衍射透镜工艺制作难的问题,以菲涅耳衍射透镜为例,研究了相位匹配原理并提出了一种优化设计二元大数值孔径衍射透镜的方法。在菲涅耳衍射透镜原理的基础上,确定了优化设计多相位台阶衍射透镜的结构参数,并给出了一个设计实例,最后对结果元件的衍射效率进行了分析与讨论。     

菲涅耳微透镜列阵衍射效率的测试与分析

归纳了目前二元位相型菲涅耳微透镜列阵衍射效率测试中所用各种衍射效率的不同定义，提出规范定义的建议。并设计了测量衍射效率的系统，方法简单易行，适于测试具有微小单元尺寸的菲涅耳微透镜列阵的衍射效率。     

菲涅耳微透镜行列阵衍射效率的测试与分析

归纲了目前二元位相型菲涅耳微透镜列阵衍射效率测试中所用各种衍射效率的不同定义，提出规范定义的建议。并设计了测量衍射效率的系统，方法简单易行，适于测试具有微小单元尺寸的菲涅耳微透镜列阵的衍射效率。     

衍射微透镜列阵在Shack-Hartmann波前传感器中的应用

菲涅耳衍射微透镜列阵是目前广泛应用的衍射光学元件之一,它是基于衍射原理,由计算机设计,并通过微细加工技术制作成的.本文介绍了8相位台阶菲涅耳衍射微透镜列阵的制作方法,并描述了一个用16×16微透镜列阵形成的小型 Shack-Hartmann 波前传感实验系统,用该系统可对入射波前进行测量和重建.     

高衍射效率闪耀全息透镜

提出一种制作位相全息透镜－闪耀全息透镜新设计，利用它可使位相全息透镜的位相分布类似位相菲涅耳透镜，其衍射效率理论值可达９５％以上，但其制作过程要比位相菲涅耳透镜容易，文中给出了原理分析和实验验证，初步结果是令人满意的。     

基于纯位相液晶空间光调制器的可变焦透镜的实现

提出一种基于纯位相液晶空间光调制器(LC-SLM)实现变焦透镜的方法。根据液晶空间光调制器的位相调制原理,以相息图控制LC-SLM来调制入射光波,并衍射产生透镜波面,改变相息图的衍射距离,可实现变焦位相菲涅耳透镜的功能。分析衍射孔径、衍射距离、相息图位相阶数等参数对变焦位相菲涅耳透镜的影响,并以点光源相息图为例对该方法的可行性进行了实验验证。实验结果表明:通过改变计算衍射距离,提出的方法可得到焦距不同的透镜,且易于控制,为三维扫描显示的实现提供了可行性依据。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.     

A stereo matching algorithm using multi-peak candidate matches and geometric constraints

Gray cross correlation matching technique is adopted to extract candidate matches with gray cross correla- tion coefficients less than some certain range of maximal correlation coefficient called multi-peak candidate matches. Multi-peak candidates are extracted corresponding to three closest feature points at first. The corresponding multi-peak candidate matches are used to construct the model polygon. Correspondence is determined based on the local geometric relations between the three feature points and the multi-peak candidates. The disparity test and the global consistency checkout are applied to eliminate the remaining ambiguous matches that are not removed by the local geometric relational test. Experimental results show that the proposed algorithm is feasible and accurate.     

Fiber Modal Index Measurements Based on Fiber Gratings

A novel method based on fiber gratings for measuring the effective indices of fiber modes is proposed. The effective index difference between the core mode and a cladding mode was obtained by analyzing the interference fringe of a pair of cascaded long-period fiber gratings. In order to extract the core mode index from the measured index difference, an index matching oil immersion method is proposed. By analyzing the interaction between the cladding mode and the oil applied on the cladding surface, the mode order and the effective index of the involved cladding mode might be calculated. Experimental results about the interference fringe shifts induced by the oil index and the oil-applied length are also presented.     

Optical Pulse Compression Schemes That Use Nonlinear Bragg Gratings

Nonlinear optical pulse compression of picosecond pulses typically requires long lengths of optical fiber and multiple components. Periodic structures, such as fiber Bragg gratings, are highly dispersive at wavelengths outside of the photonic bandgap. This implies that such gratings can be used as very short all-fiber compressors. In this paper a number of such compression schemes are reviewed involving uniform and nonuniform fiber Bragg gratings, relying on both soliton and nonsoliton compression principles. Experimental results supporting the corresponding underlying theory are also presented. Finally, an extension of one of the compression schemes is shown, which allows the generation of adjustable high-repetition rate soliton trains.