能见度仪探测光束平行度检测方法

为实现能见度计算中消光系数的正确测量,论述了光源平行度在能见度测量中的重要作用,设计了探测光束发散角检测方法与测量装置。该装置包括定焦成像系统和移动光源的直线系统,利用成像关系与空间几何关系推导了发散角表达式。以紫外LED作为实验光源,设计完成了测量系统成像装置与控制软件,计算得到水平方向与垂直方向发散角,利用所得发散角分析探测光束。实验结果表明,紫外LED光源的光束发散角水平与垂直方向分别为7.8和6.9,经比较得到未加入平行度的能见度与加入后的比值为0.51。该方法测得的能见度值更接近于实际值。     

透射式能见度仪LED光源表面特征对能见度测量的影响

从透射仪的光学测量系统出发,理论分析了光学测量系统光源对透射仪探测光束远场光斑特性的影响。结合LED光源的发光原理,研究了LED光源的表面特征,分析了LED光源表面特征与透射仪能见度测量的关系。通过仿真实验证实了光源表面特征对透射仪探测光束准直和能见度测量稳定性产生影响。研究结果表明,LED光源表面特征会影响探测光束远场光斑能量分布,在50 m基线下,使得透射仪探测光束准直中心发生位置偏移25 mm,接收光强最大变化20%,从而影响透射仪发射端对准和能见度测量。通过加扩散片和光阑限制可以明显改善远场光斑特性,远场光斑中心能量分布趋于均匀,在中心区域内接收光强变化在1%以内。     

新型LED光源气溶胶探测雷达系统优化设计与初步实验

为了实现近地面、多波长气溶胶时空探测,克服激光波长可选择性不足的问题,利用LED丰富的光谱特性,设计了一种新型发光二极管(LED)光源雷达。LED能量小且发散角大,其出光能量、发散角、接收视场角和几何重叠因子都会对LED光源雷达探测距离产生影响。针对共轴LED光源雷达系统的特点,分析了几何重叠因子的特征和计算方法,详细讨论了光源发散角和接收视场角对几何重叠因子的影响。结合LED光源的特点,利用美国标准大气模型对雷达系统的探测能力进行了仿真,优化了光源发散角和接收视场角,在LED能量一定的情况下获得了最大的探测距离。搭建了LED光源雷达系统并完成了初步实验观测,结果表明该雷达夜晚能够接收到240m远处的大气回波,验证了雷达探测低层大气气溶胶的能力。     

一种改进的夜间数字能见度测量方法

为降低背景光噪声对数字摄像法夜间能见度测量的不确定性影响,对双光源法能见度测量系统进行改进。该系统利用避光筒限制CCD相机视场角,拍摄2个位于不同距离的LED背光源,然后对摄取到的图像进行处理得到光源图像的灰度值,再根据阿拉德定律求得大气消光系数,计算出大气能见度值。通过在无背景光、有背景光未加避光筒和加避光筒3种条件下的比对实验,分析光源图像的灰度信息,并将实验结果进行处理,得出有避光筒和无避光筒时测得的能见度值与无背景光下测量结果的相关系数分别是0.911 3和0.322 7,均方根相对偏差分别是6.87% 和23.38%。结果表明:系统抑制背景光噪声的能力明显增强,能较准确地测量夜间能见度。     

猫眼效应中离焦量对激光回波发散角的影响

平行光束或者激光束在光轴方向上照射焦平面成像系统时会产生猫眼效应,焦平面探测器安装的正交性与离焦量直接影响猫眼回波的光学特性,进而影响基于猫眼效应的探测系统的性能。针对猫眼效应中离焦量与后向反射光束发散角之间关系,利用物理光学进行分析,建立理论模型,对焦距为0.18 m的焦平面探测成像系统进行数值计算得到:在离焦量为0.16 mm时,发散角最小（0.019 mrad）。搭建实验系统,测试离焦量与猫眼回波发散角,测得离焦量在0.15 mm附近存在最小的发散角为0.025 mrad,与计算结果0.019 mrad基本吻合。研究表明:1） 负离焦对发散角的影响大于正离焦;2） 猫眼回波发散角基本上随着离焦量绝对值的增加而变大,但是变化曲线并不关于零离焦量点对称,而是在某个正离焦处存在一个最小发散角。     

准单色近平行光束的X射线源

针对准单色近平行光束X射线背光成像诊断需求,提出了一种用球面弯晶进行X射线衍射选单从而获取准直光束的新方案.在神光Ⅱ装置上,设计了基于球面弯晶X射线衍射选单准直光束系统,完成了该系统的安装、调试和实验应用,获得了准单色(10~(-3)△λ/λ10~(-2))、小发散角(2 mrad)和大辐照匀斑(直径φ500 m)的X射线光源.同时基于衍射光学和球面镜成像理论,研究了不同布拉格角对球面弯晶X射线衍射光束发散角及其像散差的影响.结果表明,布拉格角会影响球面弯晶X射线衍射光束的发散角.用控制布拉格角范围的方法有望获得发散角优于1 mrad的近平行光束X射线光源.这种准单色、极小发散度和均匀角分布的X射线光源可应用于高分辨X射线成像诊断.     

激光引信中半导体激光器的准直及其测试

在理论上分析了单级单透镜光学系统对激光高斯光束发散角的影响。用单个平凸透镜对激光引信中的半导体激光器进行了准直，达到了激光引信光束准直的要求。通过CCD成像方法对准直后的光束发散角进行了测量，利用二阶矩算法计算出光束发散角。实验测得2个方向的发散角分别为θx=7.03°和θy=0.69°，验证了准直系统达到激光引信要求的θx＜10°和θy＜1°技术指标。     

精确测定X光透镜发散度的实验方法

为了建立精确测定X光透镜发散度的实验方法,提出了有效X光源的概念,得到X光束发散度的准确值.推导出了X光束发散度的理论计算公式.零点扫描实验方法证明了理论公式的正确性.晶体转动实验方法测量了X光束的发散度,与理论值符合得很好,晶体转动实验方法应用到对X光透镜发散度的测定可以消除分析晶体不完整性的影响.     

基于电荷耦合器件探测气溶胶散射相函数与大气能见度的研究

提出一种测量大气气溶胶散射相函数及能见度的方法,并且设计了以半导体激光器为光源和以电荷耦合器件(CCD)为探测器的实验装置,利用该实验装置测量了15°～45°的散射灰度值角分布。根据激光雷达方程和Henyey-Greenstein散射相函数理论,拟合气溶胶的相函数分布,计算其能见度。将拟合得到的相函数和计算的能见度的结果分别与POM天空辐射计和Belfort能见度得到的观测结果进行对比,结果表明两者一致性较好,证明了利用激光光源和CCD测量气溶胶相函数和能见度的可行性。     

基于CCD测量激光光束质量M~2

设计并搭建了一套基于CCD测量激光光束质量M2的系统。采用CCD测量激光光束在不同位置处的光束直径,通过非线性最小二乘法拟合测量数据获得光束腰斑直径和远场发散角,再通过公式计算得到激光光束质量M~2。利用本系统测量多组数据,并与专业M~2仪所测的数据进行对比,二者一致性较好,表明采用本实验装置测量激光光束质量M~2可以有效地替代M~2仪。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.