一种水溶性氢氧根钌配合物的合成及其对乙腈的催化水化作用

以RuCl₃•3H₂O为原料合成了水溶性钌配合物[(bipy)₂Ru(H₂O)₂](OTf)₂ (bipy＝2,2-bipyridine, Otf^－＝triflate), 利用DBU (1,8-Diazabicyclo[5.4.0]undec-7-ene)脱质子化合成了水溶性氢氧根配合物[(bipy)₂Ru(H₂O)(OH)](OTf). 研究了[(bipy)₂Ru(H₂O)(OH)](OTf)催化水化乙腈生成乙酰胺的反应. 机理研究表明, 催化循环的关键中间体为氧配位的酰亚胺配合物[(bipy)₂Ru(CH₃CN)(OCMe＝NH)]^＋, 经过生成[(bipy)₂Ru(k²-N,O-NH＝CMeN＝CMeO)]^＋、水亲核进攻开环生成{(bipy)₂Ru[NH＝C(OH)Me](OCMe＝NH)}^＋、乙腈取代其NH＝C(OH)Me配体产生乙酰胺, 同时再生成[(bipy)₂Ru- (CH₃CN)(OCMe＝NH)]^＋完成催化循环.     

铽离子探针法研究单宁酸与伴清蛋白相互作用

以pH 7.4、含有0.1 mol•L^－1 NaCl的0.01 mol•L^－1 Hepes为缓冲液, 在(25±0.2) ℃, 采用荧光光谱法研究了单宁酸(TA)与伴清蛋白(apoOTF)的相互作用. 由蛋白内源荧光测定表明: TA分别与apoOTF, Tb_N^3＋-apoOTF和Tb_N^3＋-apoOTF- Tb_C^3＋结合形成1∶1配合物, 其表观结合常数(K_A)分别为7.15×10⁵, 4.16×10⁶和3.77×10⁶ mol^－1•L. 以Tb^3＋敏化荧光测定表明：TA与Tb³⁺可形成1∶2配合物, 且TA与Tb³⁺的结合能力大于apoOTF与Tb³⁺的结合能力. TA-Tb₂^3＋配合物也可与该蛋白结合形成1∶1复合物, 其K_A为1.86×10⁵ mol^－1•L.     

一系列Ru(II)配合物电致化学发光性质的比较研究

比较研究了以C₂O₄^2－为共反应物时5个结构相关的Ru(II)配合物[Ru(bpy)₂L¹]^2＋, [Ru(bpy)₂L²]^2＋, [Ru(bpy)₂L³]^2＋, [Ru(phen)₂L¹]^2＋和[Ru(phen)₂L²]^2＋(其中bpy＝2,2′-联吡啶, phen＝1,10-邻菲啰啉, L¹＝4-羧基苯基咪唑[4,5-f][1,10]邻菲啰啉, L²＝3-羧基-4-羟基苯基咪唑[4,5-f][1,10]邻菲啰啉, L³＝3,4-二羟基苯基咪唑[4,5-f][1,10]邻菲啰啉)的电致化学发光(ECL)性质. 结果表明, 酚羟基的存在能有效地淬灭Ru(II)配合物[Ru(bpy)₂L²]^2＋, [Ru(bpy)₂L³]^2＋和[Ru(phen)₂L²]^2＋的ECL, 其它Ru(II)配合物的ECL量子效率与[Ru(bpy)₃]^2＋相差不大.     

新型双核铜金属配合物为中性载体的硫氰酸根离子高选择性电极的研究

研制了基于N,N'-亚乙基(μ-5,5-亚甲基-二水杨醛根)(乙酰丙酮根)合二铜(II) [Cu₂(II)-MDSBAE]金属配合物为中性载体的阴离子选择性电极. 试验表明, 以Cu₂(II)-MDSBAE金属配合物为中性载体的电极对SCN^－具有良好的电位响应特性, 且呈现反Hofmeister行为,其选择性序列为: SCN^－＞Sal^－＞I^－＞ClO₄^－＞NO₃^－＞Br^－＞NO₂^－＞Cl^－≈SO₃^2－＞SO₄^2－. 在pH 5.0的磷酸盐缓冲体系中, 电极电位呈现近能斯特响应, 线性响应范围为1.0×10^－6～1.0×10^－1 mol/L, 斜率为－53. 6 mV/dec (25 ℃), 检测下限为8.1×10^－7 mol/L. 用交流阻抗研究了电极的响应机理, 并用紫外可见光谱技术测定了电极载体与SCN^－, Sal^－, I^－, ClO₄^－和NO₃^－离子间的配位数及缔合常数. 将该电极用于实验室废水和工业废水中硫氰酸根的检测, 其结果令人满意.     

基于柔性四羧酸的三个一维/二维/三维Zn(Ⅱ)/Co(Ⅱ)配合物的晶体结构及荧光性质

通过水热/溶剂热合成的方法制备了3个Zn(Ⅱ)/Co(Ⅱ)配合物{[Zn(H₂L)(H₂O)₃]·H₂O·0.5H₄L}_n(1)、{[Co(L)_0.5(4,4'-bpy)]·0.5H₂O}_n(2)和{[Co(L)_0.5(pbmb)(H₂O)]·H₂O}_n(3)(H₄L=5,5'-(hexane-1,6-diyl)-bis(oxy)diisophthalic acid,4,4'-bpy=4,4'-bipyridine,pbmb=1,1'-(1,3-propane)bis-(2-methylbenzimidazole))。结构分析表明配合物1为一维链结构。2为拓扑符号为(6⁴·7·8)(6·7²)的三重穿插网络结构。3是拓扑符号为(4·6²)(4²·6²·8²)的(3,4)-连接的二维网络结构。配合物1呈现出较好的荧光性质。     

季胺基修饰的Salen配合物的合成及性质

采用季胺基取代的水杨醛(由2,4-二羟基水杨醛、1,2-二溴乙烷、高氯酸钠等为原料合成)合成了两个新型Salen配体N,N'-二{4-[[2-(三甲胺基)乙基]氧化]水杨醛}-邻苯二胺二高氯酸盐(L¹), N-(2-羟基-5-甲基二苯甲基)-N'-{4-[[2-(三甲胺基)乙基]氧化]水杨醛}-邻苯二胺高氯酸盐(L²), 并进一步合成了8个新型Salen金属配合物[ZnL¹, NiL¹, CuL¹, ZnL², NiL², CuL², MnL², CoL²]. 用¹H NMR, ¹³C NMR, FT-IR, UV-vis, MS对配体和配合物进行了表征, 测定了金属配合物的水溶性及在水中的摩尔电导率. 结果表明, 与相应母体配合物的水溶性比较, 含有季胺基修饰的Salen金属配合物的水溶性有了较大提高.     

新型三硅氧烷表面活性剂的合成与界面性能

低聚乙二醇单甲醚和环氧氯丙烷在相转移催化剂(P.T.C)存在下合成出低聚乙二醇甲醚缩水甘油醚, 然后与氨丙基三硅氧烷进行开环反应, 合成出了新型的三硅氧烷表面活性剂Me₃SiOSiMeROSiMe₃ [R＝(CH₂)₃N(CH₂CH(OH)CH₂- (OCH₂CH₂)_xOCH₃)₂, x＝1, 2]. 通过¹H NMR确证了这些目标产物的结构, 并且通过测定其水溶液的平衡表面张力研究了其表面活性. 在浓度约为10^－4 mol•L^－1时可以将水的表面张力降低至约21～22 mN•m^－1.     

取代基对咪唑[4,5-f]-1,10-邻菲罗啉Ru(Ⅱ)配合物的温敏性能影响

合成了3种具有不同取代基的咪唑[4, 5-f]-1,10-邻菲罗啉配体L¹~L³及其Ru(Ⅱ)配合物[Ru(L¹)₃]、[Ru(L²)₃]和[Ru(L³)₃],并进行了表征。这些Ru(Ⅱ)配合物在溶液中具有π→π^*跃迁吸收峰和金属到配体的电荷转移跃迁(MLCT)吸收峰,其发光峰位约为590 nm左右。将Ru(Ⅱ)配合物掺杂到聚甲基丙烯酸甲酯(PMMA)中得到相应的温敏漆。Ru(Ⅱ)配合物在PMMA膜中的吸收峰精细结构消失,且在长波方向663 nm附近有新的发射峰,表明Ru(Ⅱ)配合物在PMMA膜中有聚集。温度升高后,Ru(Ⅱ)配合物在PMMA膜中的发射峰强度逐渐减弱。分别计算了在30~60 ℃和60~90 ℃区间内非辐射活化能E_nr和温度灵敏度S_T。结果表明,具有苯基取代的咪唑[4, 5-f]-1,10-邻菲罗啉配体的[Ru(L¹)₃]配合物,比咪唑[4, 5-f]-1,10-邻菲罗啉Ru(Ⅱ)配合物[Ru(L²)₃]及烷基取代基的咪唑[4, 5-f]-1,10-邻菲罗啉Ru(Ⅱ)配合物[Ru(L³)₃]具有更高的温度灵敏度。     

两个新颖的铜-二氮杂菲和钼(磷,硒)杂多酸组成的有机-无机杂合化合物:合成和晶体结构

水热法合成了两个新颖的有机-无机杂合化合物{[Cu(o-phen)(H₂O)]₃[Mo₅P₂O₂₃]}•4.5H₂O (1) 和{[Cu(o-phen)- (H₂O)]₂[Mo₅Se₂O₂₁]} (2) (o-phen＝1,10-phenanthroline). 通过红外光谱和单晶X射线衍射分析确定了它们的结构. 结构分析表明两个分子结构中的相邻[Mo₅P₂O₂₃]^6－或[Mo₅Se₂O₂₁]^4－阴离子均由两个桥式的[Cu(o-phen)(H₂O)]单元连接成分别为风车状和双侧桥联状一维聚合链, 化合物1的双金属链又通过若干链间氢键形成层状堆积结构. 讨论了钼杂多酸阴离子和第二种金属-配体亚单元阳离子之间的相互匹配关系.     

利培酮的电化学行为及应用研究

采用循环伏安法、线性扫描伏安法、常规脉冲伏安法和恒电位电解法等电化学手段, 详细研究了利培酮在pH 7.07～10.32 B-R缓冲溶液和0.2 mol•L^－1 NaOH溶液中的电化学行为. 研究表明: 在pH 7.07～10.07 B-R缓冲溶液中, 利培酮产生的P₁波为催化氢波. 在pH＝10.32 B-R缓冲溶液中, 利培酮可以产生P₂和P₃两个波. 其中, P₂波为不可逆的单电子还原波, P₃波可以分裂成两个波P_3a和P_3b. P_3a波为P₂波的进一步单电子还原, 而P_3b波则属于催化氢波. 在0.2 mol•L^－1 NaOH溶液中, 利培酮产生的P₄波是一个两电子的不可逆还原波. 另外, 根据P₁波的一阶导数峰电流与利培酮浓度在1.6×10^－5～2.0×10^－6 mol•L^－1 (r＝0.9950)间的线性关系, 建立了利培酮片剂中利培酮含量的测定新方法. 新方法的检出限为1.0×10^－6 mol•L^－1, 回收率在105%～102%之间, 相对标准偏差为0.84%.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.