杂多阴离子的相转移化学 Ⅰ.取代的Keggin及Dawson结构杂多阴离子在非极性溶剂中的溶剂化行为研究

利用四庚基溴化铵将Keggin结构的杂多阴离子ZW~1~1O~3~9M(H~2O)^n^-(Z=Si,Ge,P,M=Ni^2^+,Cu^2^+,Cr^3^+,Co^2^+,n=4～6)和Dawson结构的杂多阴离子P~2W~1~7O~6~1M(H~2O)^n^-(M=Ni^2^+,Cu^2^+,Cr^3^+,Co^2^+,n=7,8) 从水溶液中转移至非极性溶剂(苯或甲苯)中,并观察到在水溶液中难以进行的配位水的脱去反应,形成配位不饱和的杂多阴离子.当加入Lewis碱如丙酮,吡啶等,可迅速恢复饱和配位,其电子吸收光谱也相应变化,基本恢复到配位饱和时的数值,有ESR信号.实验表明,在非极性溶剂中,配体之间相互进行的取代反应,吡啶的配位能力最强, 发生了取代反应ZW~1~1O~3~9M(L)^n^-+Py→ZW~1~1O~3~9M(Py)^n^-+L(L=丙酮,乙腈等).同时我们也研究了温度,杂多阴离子浓度,惰性气体流量对杂多阴离子在非极性溶剂中的溶剂化行为的影响,得到了相转移的一般规律,为杂多阴离子在非极性溶剂中的催化研究提供了理论依据     

杂多阴离子柱撑水滑石的合成、热稳定性、酸碱性研究

采用水溶液中阴离子直接交换法合成了过渡金属单取代Keggin结构杂多阴离子SiW11M(H2O)O39^6^- (M=Mn^2^+, Fe^2^+, Co^2^+, Ni^2^+, Cu^2^+,Zn^2^+)柱撑水滑石。用元素分析、XRD和IR对产物的组成与结构进行了表征。XRD结果给出柱撑产物的底面间距达1.47nm。DTA结合不同温度下焙烧样品的XRD、IR研究表明, 柱撑水滑石在低于250℃时脱除物理吸附水和层间水; 在400~500℃之间脱除层上羟基, 形成一个无定形的混合氧化物状态; 在600℃以上无定形态结晶为晶态氧化物混合物。异丙醇探针反应表明, 柱撑水滑石具有高于水滑石前驱体和相应杂多酸盐的催化活性, 且同时存在酸碱两类催化活性中心, 但酸中心明显较强。     

双2:17钼磷系列稀土杂多蓝的合成和性质研究

首次合成和离析了八种以缺位型Dawson结构钼磷杂多阴离子为配体的稀土杂多蓝K17H2[Ln-(P2Mo17O61)2].nH2O和K17H4[Ln(P2Mo17O61)2].nH2O(Ln=La, Pr, Sm,Yb)。通过元素分析、电位滴定、红外光谱、紫外光谱、极谱、循环伏安、X射线光电子能谱、热重-差热分析和电子顺磁共振对杂多蓝进行了表征。实验结果表明,杂多阴离子还原为杂多蓝后, 性质发生了某些变化, 但结构基本不变, 配体P2Mo17O^1^061仍为α2型。     

奎宁与过渡元素钨硼多金属氧酸盐中配位水的取代反应研究

报道了钨硼杂多阴离子[BW11O39M(H2O)]^7-(M=Co^2 ,Cu^2 ,Ni^2 )中配位水与奎宁的取代反应，利用UV—vis和ESR谱进行了表征，并且测定了配合物的旋光度，结果表明奎宁取代了杂多阴离子中的配位水，与杂多阴离于中的取代过渡金属原子形成了配位键．奎宁与杂多阴离子键合生成的杂多配合物，仍然具有旋光活性，其中含Cu^2 的奎宁杂多化合物保持了奎宁的左旋特性，而含Ni^2 的奎宁杂多配合物由左旋变为右旋。并初步探讨了取代反应的机理。     

第四周期过渡金属钼磷三元杂多化合物的氧化还原性质研究

研究了Keggin结构钼磷杂多化合物Na₅[PM(H₂O)Mo₁₁O₃₉]·nH₂O(M=Mn²⁺,Co²⁺,Ni²⁺,Cu²⁺,Zn²⁺在溶液中的氧化还原性质,发现环境的改变可对杂多阴离子的极谱半波电位产生影响,其影响程度的大小决定于过渡金属离子本身的性质。取代后的钼磷杂多阴离子的半波电位顺序为Ni²⁺>Co²⁺>Zn²⁺>Cu²⁺>Mn²⁺,pH值的变化影响氧化还原性质,并阐述了变价金属Cu²⁺对杂多阴离子氧化还原性质的影响.     

三缺位杂多阴离子XW9O34^1^0^-(X=Si,Ge)的稀土衍生物的合成与表征

三缺位杂多阴离子A, α-和A, β-SiW9, A, α-和A, β-GeW9与稀土硝酸盐反应生成A, α-和A, -β[Ln3O3.(X2W9O34)2]^1^7^-(Ln=La, Ce, Pr, Nd, Sm, Eu, Gd,Er)型杂多阴离子。183W NMR结果表明, 配体XW9O34^1^0^-的结构在反应前后并没有发生明显的变化, 本文还对合成化合物的磁性质及氧化还原性质等进行了研究。     

K15[(LnO)3(PW9O34)2]·xH2O型杂多酸钾的合成与性质

PW9O34^9-阴离子可与镧系元素离子反应生成[(LnO)3(PW9O34)2]^15-型杂多阴离子(Ln=LaCe,Pr,Nd,Sm,Eu,Gd)。^31PNMR测定表明,杂多阴离子中的PW9O34^9-具有A型结构;极谱半波电位、还原电子数及红外光谱测试表明,杂多阴离子中的PW9O34^9-是A,a型异构体。杂多阴离子在水溶液中稳定的pH范围是5.3-8.1,其钾盐的热分解温度约480℃。     

新型层柱微孔材料-XW11Co柱撑Zn-Al型层柱化合物的合成、表征及催化活性研究

采用水热合成与离子交换方法, 将中心原子不同的过渡金属(Co^2^+)取代型Keggin结构杂多阴离子XW11O39Co(H2O)^n^-(X=Ge^4^+, B^3^+和Co^2^+)嵌入Zn-Al型阴离子粘土层间, 合成了底面间距(d001)为1.46±0.01nm的新型层柱化合物Zn2Al-GeW11Co, Zn2Al-BW11Co和Zn2Al-CoW11Co; 通过XRD, IR, XPS和DTA等手段, 研究了它们的结构与性质, 推测了这些杂多阴离子(XW11Co)在层间的空间取向; 考察了这些新型层柱化合物对乙酸与n-丁醇酯化反应的催化活性; 吡啶吸附IR光谱研究结果表明, 它们同时具有B酸与L酸两种酸中心。     

Dawson结构钼砷杂多酸(盐)的合成与性质研究

采用酸化-回流-乙醚萃取法合成了二十种Dawson结构钼砷杂多酸及其盐, 元素分析确定了它们的组成, 其通式为MwAs2Mo18Oe2.nH2O, 酸碱及电导滴定确定了碱度, 系统地研究了它们的红外光谱, 紫外光谱, 极谱, 循环伏安, 热重-差热分析等性质, 给出了杂多阴离子As2Mo18O62^6^-在水溶液中的氧化还原机理,讨论并指认了紫外吸收为e→*和e→b2的荷移跃迁谱带, 考察了抗衡离子M^n^+对主要红外振动光谱, 热分解温度及其分解产物的影响。     

三空缺杂多阴离子衍生物的合成与性质

合成了三空缺WellsDawson杂多阴离子的衍生物Na20[M2(X2W15O56)2].nH2O,其中X=P,As;M=Mn,Co,Cu,Zn,用红外光谱、可见光谱、极谱及元素分析对其进行了表征.用极谱法研究了这些化合物在水溶液中的稳定性和反应性,其极谱行为与单空缺阴离子2αP2W17O6110-相似,在4.2相似文献   

单空位Keggin结构杂多化合物的相转移化学研究(英文)

利用相转移试剂四庚基溴化铵将含过渡金属单空位Ｋｅｇｇｉｎ结构杂多化合物［ＸＷ１１Ｏ３９Ｚ（Ｈ２Ｏ）］ｎ－（Ｘ＝Ｃｒ，Ｍｎ，Ｆｅ；Ｚ＝Ｃｏ，Ｚｎ，Ｃｒ；ｎ＝６，７），从水相转移至非极性溶剂有机相苯中．并根据电子光谱、ＩＲ谱、ＥＳＲ谱的变化，进一步考察了它们在有机相苯中的配位水脱去，形成配位不饱和杂多阴离子的情况，同时详细研究了该类杂多阴离子所含表面配位水与若干无机阴离子及有机配体的取代反应．实验表明，杂多阴离子由水相转移至有机相苯后，较易脱去配位水形成溶剂配位不饱和离子．当加入Ｌｅｗｉｓ碱时，可迅速恢复饱和配位．ＥＳＲ测定给出某些含过渡金属单空位Ｋｅｇｇｉｎ结构杂多阴离子相转移前后价态变化及电子转移情况．     

锰,钴,镍钨硅杂多酸盐的合成及性质研究

对3种过渡金属钨硅杂多酸钾盐的组成及性质进行了研究,与12-钨硅酸钾比较表明,在Keggin阴离子骨架中,以空位或过渡金属Mn~(2+)、Co~(2+)、Ni~(2+)取代一个W~(6+)后,其W—O、Si—O键振动吸收频率、组成元素内层电子结合能、W—O多面体的可还原性、晶形、晶格大小及热稳定性都出现了明显变化,这些变化与过渡元素的性质相关联.     

FTIR, magnetic, 1H NMR spectral and thermal studies of some chelates of caproic acid: inhibitory effect on different kinds of bacteria

A convenient method for the preparation of complexes of the Cr3+, Mn2+, Fe3+, Co2+, Ni2+, Zn2+, ZrO2+, UO2(2+), Zr4+ and Th4+ ions with caproic acid (Hcap) is reported and this has enabled 10 complexes of caproate anion to be formulated: [Cr(cap)3].5H2O, [Mn(cap)2(H2O)2], [Fe(cap)3].12H2O, [Co(cap)2(H2O)2].4H2O, [Ni(cap)2(H2O)2].3H2O, [Zn(cap)2], [ZrO(cap)2].3H2O, [UO2(cap)(NO3)], [Zr(cap)2(Cl)2] and [Th(cap)4]. These new complexes were synthesized and characterized by elemental analysis, molar conductivity, magnetic measurements, spectral methods (mid infrared, 1H NMR and UV-vis spectra) and simultaneous thermal analysis (TG and DTG) techniques. It has been found from the elemental analysis as well as thermal studies that the caproate ligand behaves as bidentate ligand and forming chelates with 1:1 (metal:ligand) stoichiometry for UO2(2+), 1:2 for (Mn2+, Co2+, Ni2+, Zn2+, ZrO2+ and Zr4+), 1:3 stoichiometry for (Cr3+ and Fe3+) and 1:4 for Th4+ caproate complexes, respectively, as bidentate chelating. The molar conductance measurements proved that the caproate complexes are non-electrolytes. The kinetic thermodynamic parameters such as: E*, DeltaH*, DeltaS* and DeltaG* are estimated from the DTG curves. The antibacterial activity of the caproic acid and their complexes was evaluated against some gram positive/negative bacteria.     

Quinoline-based molecular clips for selective fluorescent detection of Zn2+

New selective Zn2+ fluorescent sensors, di(2-quinoline-carbaldehyde)-2,2'-bibenzoyl-hydrazone (QB1) and di(2-quinolinecarbaldehyde)-6,6'-dicarboxylic acid hydrazone-2,2'-bipyridine (QB2), have been designed and prepared. Both QB sensors exhibit an emission band centered at 405 nm (excitation at 350 nm) with low quantum yield. Zinc binding not only red-shifts the emission band to 500 nm, but also enhances the fluorescence intensity by an order of magnitude based on the deprotonization strategy via self-assembly. These probes are highly selective for Zn2+ over biologically relevant alkali metals, alkaline earth metals and the first row transition metals such as Mn2+, Fe2+, Co2+ and Ni2+ in buffered aqueous DMSO solution.     

Use of miniaturised isotachophoresis on a planar polymer chip to analyse transition metal ions in solutions from metal processing plants

An electrolyte system, using malic acid as a complexing agent, has been developed to allow the determination of transition metal cations using miniaturised isotachophoresis. The method allowed the simultaneous determination of Mn2+, Cr3+, Fe2+, Co2+, Zn2+ and Ni2+ to be made without interference from other common ions. Limits of detection were calculated to be in the range 0.5-1.0mg l(-1) for Mn2+, Cr3+ Co2+ and Zn2+ and 2.0 mg l(-1) for Fe2+ and 4.7 mg l(-1) for Ni2+. The successful analysis of five industrial samples, containing a range of these metal ions, obtained from metal processing plants were achieved in under 13 min. The separations were performed on a poly(methyl methacrylate) chip with integrated platinum wire conductivity detection electrodes.     

High-voltage contactless conductivity detection of metal ions in capillary electrophoresis

The detection of alkali, alkaline earth and heavy metal ions with a high-voltage capacitively coupled contactless conductivity detector (HV-C(4)D) was investigated. Eight alkali, alkaline earth metal ions and ammonium could be separated in less than 4 min with detection limits in the order of 5 x 10(-8) M. The heavy metals Mn2+, Pb2+, Cd2+ Fe2+, Zn2+, Co2+, Cu2+ and Ni2+ could also be successfully resolved with a 10 mM 2-(N-morpholino)ethanesulfonic acid/DL-histidine (MES/His)-buffer. Zn2+, Co2+, Cu2+ and Ni2+ showed an indirect response. The detection limits for the heavy metals were determined to range from about 1 to 5 microM.     

Irving-Williams order in the framework of connectivity index ³χv enables simultaneous prediction of stability constants of bivalent transition metal complexes

Logarithms of stability constants, log K? and log β?, of the first transition series metal mono- and bis-complexes with any of four aliphatic amino acids (glycine, alanine, valine and leucine) decrease monotonously with third order valence connectivity index, 3χv, from Cu2+ to Mn2+. While stability of the complexes with the same metal is linearly dependent on 3χv, stability constants of Mn2+, Fe2+, Co2+, and Ni2+complexes with the same ligand show a quadratic dependence on 3χv. As Cu2+ complexes deviate significantly from quadratic functions, models for the simultaneous estimation of the stability constants, yielding r = 0.999 (S.E. = 0.05) and r = 0.998 (S.E. = 0.11), for log K? and log β?, respectively, were developed only for Mn2+, Fe2+, Co2+, and Ni2+ complexes with amino acids.     

铊(I)离子选择电极动力学分析法测定超痕量铁

Fe(II) induces the reaction between Tl3+ and H2O2. The rate of reaction is linearly proportional to the concentration of Fe2+ in the range 2.5 ?10-9-2.5 ?10-8 mol dm-3 (20? and 5 ?10-9-5 ?10-8 mol dm-3 (15?. The standard deviation is less than 0.071 ?10-8. A 1000-fold excess of Zn2+, Cd2+, Mg2+, Ni2+, Pb2+, Ba2+, Ca2+, Li+, Na+, Ag+, NO3-, SO42-, AcO-, HPO42-, 500-fold excess of Al3+, Fe3+, Co2+, Hg2+ and 100-fold excess of Ti4+, Cr3+, Cu2+, Br-, Cl- can be tolerated, but reducing agents such as (NH2)2SO4, NH2OH.HCl interfered. This kinetic method was applied to determine Fe(II) in standard zinc sample and fountain water, with satisfactory results.