首页 | 官方网站   微博 | 高级检索  
     

Zr基非晶合金/W丝复合材料动态断裂模式研究
引用本文:程焕武,才鸿年,王鲁,薛云飞,张海峰,王爱民.Zr基非晶合金/W丝复合材料动态断裂模式研究[J].兵器材料科学与工程,2007,30(6):25-28.
作者姓名:程焕武  才鸿年  王鲁  薛云飞  张海峰  王爱民
作者单位:北京理工大学,材料科学与工程学院,北京,100081;中国科学院,金属研究所,辽宁,沈阳,110015
摘    要:利用Hopkinson压杆装置(SHPB)和SEM等研究室温下经过不同工艺处理的Zr基非晶合金/W丝复合材料的动态力学性能及断裂模式。结果表明,由工艺4制备的复合材料具有最好的动态压缩性能,在0.8MPa打击压力下,其动态抗压强度达到3965MPa。该复合材料动态压缩断裂模式为混合断裂模式,包括剪切断裂和纵向开裂,W丝呈现劈裂和屈曲特征。

关 键 词:Zr基非晶合金/W丝复合材料  制备工艺  动态压缩  断裂模式  SHPB
文章编号:1004-244X(2007)06-0025-04
收稿时间:2007-01-05
修稿时间:2007-01-26

Dynamic fracture behavior of tungsten fiber reinforced Zr-based metallic glass matrix composite
CHENG Huan-wu,CAI Hong-nian,WANG Lu,XUE Yun-fei,ZHANG Hai-feng,WANG Ai-min.Dynamic fracture behavior of tungsten fiber reinforced Zr-based metallic glass matrix composite[J].Ordnance Material Science and Engineering,2007,30(6):25-28.
Authors:CHENG Huan-wu  CAI Hong-nian  WANG Lu  XUE Yun-fei  ZHANG Hai-feng  WANG Ai-min
Abstract:The dynamic mechanical property and fracture behavior of tungsten fiber reinforced ZrTiCuNi metallic glass matrix composite prepared by different processes were investigated at room temperature by means of the Split Hopkinson Pressure Bar (SHPB) and SEM. The composite prepared by process No.4 exhibited the best dynamic compressive properties, the fracture stress is 3 965 MPa under impact pressure of 0.8 MPa. The failure mode of the specimen is a mixture of shear failure and axial splitting, splitting and buckling are the dominant fracture behavior of the tungsten fiber.
Keywords:SHPB
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号