聚合物驱产出水对油层损害的主要物质的确定

系统分析了大庆油田南三区东部聚合物驱产出水处理前后原油、聚合物、固体悬浮物、无机离子和细菌等成分的含量及其固体悬浮物颗粒直径大小与分布，并且对该区聚合物驱产出水主要特征进行了总结，在此基础上，根据油层损害机理并且结合该区油层的孔渗特征，研究和确定了污染物质。最后得出以下主要结论：聚合物驱产出水中硫酸盐还原茵是主要污染物质，此外，向萨葡油层的中、低渗层及高台子油层回注时，固体悬浮物和原油也是主要污染物质，而聚合物仅对低渗层造成损害。

Analysis of Contaminants in Water Produced from Formation with Polymer Flooding and Its Possibility for Recycling

The contents of oil, polymers, solid particles, inorganic ions and bacteria in water with or without pretreatment which was produced from formation with PAM flooding in Nanshan Area, Daqing oilfield are analyzed respectively by means of various chemical and physical methods. The diameters and their distribution of solids are also measured by laser granularity equipment. According to the chemical and physical properties of these materials and their damage mechanism to oil formation, the damage contents are analysed and indentified determined. The main conclusions are that the sulphate deoxidized bacteria are main damage contents for the rejecting of water into formation. In addition solid particles and oil can damage formation with medium or low permeability, while PAM can damage formation with low permeability.