| 气囊式抛光机数控系统的研究与开发 |
| |
| 引用本文： | 余顺周,姚英学,高波,谢大纲.气囊式抛光机数控系统的研究与开发[J].机床与液压,2007,35(5):13-15,41. |
| |
| 作者姓名： | 余顺周 姚英学 高波 谢大纲 |
| |
| 作者单位： | 1. 哈尔滨工业大学机电学院,哈尔滨,150001
2. 北京印刷学院,北京,102600 |
| |
| 基金项目： | 哈尔滨工业大学校科研和教改项目
,
黑龙江省哈尔滨市青年科学基金 |
| |
| 摘 要： | 气囊式抛光是一种新颖的非球面抛光工艺,是一种前沿的制造技术.本文通过对气囊抛光进动原理和抛光试验机床结构的分析,并根据气囊抛光的工作机理和控制参数,提出采用以PC嵌入CNC控制卡方式的气囊抛光数控体系结构.其硬件系统以PC与PMAC控制器为核心,能够控制6个运动轴;数控系统的软件系统建立在Windows通用操作系统平台上,具有很强的开放性、可操作性以及功能扩展性.该数控系统已应用在气囊抛光试验样机上.
|
| 关 键 词： | 气囊式抛光 数控系统 体系结构 机床 气囊式 抛光机 数控系统 研究 开发 Machine Tool CNC System Research 试验样机 应用 扩展性 功能 可操作性 开放性 系统平台 通用操作 Windows 系统建立 软件 运动轴 |
| 文章编号： | 1001-3881（2007）5-013-3 |
| 修稿时间： | 2006-05-15 |
Development and Research of CNC System for Machine Tool with Bonnet Tool |
| |
| YU Shunzhou,YAO Yingxue,GAO Bo,XIE Dagang.Development and Research of CNC System for Machine Tool with Bonnet Tool[J].Machine Tool & Hydraulics,2007,35(5):13-15,41. |
| |
| Authors: | YU Shunzhou YAO Yingxue GAO Bo XIE Dagang |
| |
| Affiliation: | 1. School of Mechatronics Engineering, Harbin Institute of Technology, Harbin 150001, China; 2. Beijing Institute of Graphic Communication, Beijing 102600, China |
| |
| Abstract: | Bonnet tool polishing is a novel polishing technology for aspheric surfaces,and is a advanced manufacture technology.Based on analyzing the mechanism of precession of bonnet tool polishing and structure of machine tool,the architecture of computer numerical control(CNC) system with PC embedded NC card for machine tool with bonnet tool was presented according to control parameter of bonnet tool polishing.In the architecture,PC and PMAC(Programmable Multi-Axis Controller) is the center of hardware of CNC system that can control six motion axes.Software system of CNC that based on Windows was developed so it has highly openness,maneuverability and expansibility.CNC system developed was applied on the testing machine tool with bonnet tool. |
| |
| Keywords: | Bonnet tool polishing CNC system Architecture Machine tool |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
