High areal capacitance of FeOOH-carbon nanotube negative electrodes for asymmetric supercapacitors

The relatively low capacitance of negative electrodes, as compared to the capacitance of advanced positive electrodes, poses a serious problem, since this limits the development of asymmetric supercapacitor (SC) devices with a large voltage window and enhanced power-energy characteristics. We fabricate negative SC electrodes with a high capacitance that match the capacitance of advanced positive electrodes at similar active mass loadings, as high as 37?mg?cm^?2. Cyclic voltammetry, impedance spectroscopy, galvanostatic charge-discharge data and the power-energy characteristics of the asymmetric SC device exhibit good electrochemical performance for a voltage window of 1.6?V. Our approach involves the development and application of particle extraction through liquid-liquid interface (PELLI) methods, new extraction mechanisms and efficient extractors to synthesize α-FeOOH and β-FeOOH electrode materials. The use of PELLI allows agglomerate-free processing of powders, which facilitates their efficient mixing with multiwalled carbon nanotubes (MWCNT) and allows improved electrolyte access to the particle surface. Experiments to determine the properties of FeOOH-MWCNT composites provided insight into the influence of the electrode material and the structure of extractor molecules on the composite properties. The highest capacitance of 5.86?F?cm^?2 for negative electrodes and low impedance were achieved using α-FeOOH-MWCNT composites and a 16-phosphonohexadecanoic acid (PHDA) extractor. This extractor allows adsorption on particles, not only at the liquid-liquid interface, but also in the bulk aqueous phase and can potentially be used as a capping agent for particle synthesis and as an extractor in the PELLI method.     

抽采孔液态CO2预裂效果显微CT实验研究

为研究液态CO2预裂爆破后,煤体内裂隙发育情况,采用高精度微焦点显微CT系统,对预裂后不同区域的煤样进行CT扫描,并利用Photoshop进行孔裂隙占比统计学分析。研究结果显示,距预裂孔4 m处的煤体裂隙发育明显,孔裂隙占比增加了一倍,而在5 m处的煤体裂隙则发育较弱。表明抽采孔内采取液态C2预裂技术后,4 m范围内的煤体裂隙得到了充分发育,为瓦斯抽采提供了有利条件。     

锰铜基高阻尼合金中锌量的测定──硫氰酸盐萃取分离络合滴定法

基于甲基异丁基甲酮于稀盐酸介质中定量地萃取Ｚｎ￣（２＋）与ＣＮＳ￣－形成的络阴离子。从而达到与共存的锰、镍、铝、铬的完全分离。在有氟化物、硫脲存在时Ｆｅ￣（３＋）、Ｃｎ￣（２＋）和Ａｇ￣＋也不被萃取。有机相中的锌于ＰＨ５．５“六胺”缓冲介质中返萃取回水相，用ＥＤＴＡ滴定。在文中给定的条件下锌的一次被萃取率可达９９％以上，成功地解决了锰铜基高阻尼合金中共存离子对锌量测定的干扰问题。     

三聚甲醛萃取—精馏新工艺及过程优化

本文对采用Ｓ１和Ｓ２的混合物作为萃取剂的三聚甲醛萃取－精馏新工艺进行了模拟计算，得到了使总费用最低的三聚甲醛精制工艺的联合操作参数。模拟计算结果成功地指导了小试操作，并可为大型工程设计提供可靠的基础数据。     

测定环境中钚的新方法

提出了ＴＯＰＯ萃取，大面积有机相制原与平行板屏栅电离室α谱仪结合，测定草、土壤等环境中钚的新方法。土壤和草灰的化学回收率分别为７２％和９７％，最低探测限为４×１０＾－２Ｂｑ／ｋｇ。分析了Ｉ－ＡＥＡ和ＮＩＳＴ的标准物质，结果与标准值相符。操作程序简单、快速，适用于核事故应急分析和环境监测。     

保安矿柱回采地压监测数据分析

通过现场在马头门附近设立监测站进行长期监测井筒地压，分析了井筒附近地压活动规律，并与数值模拟分析值进行对比验证，从而为安全、高效地提前回收保安矿柱提供有力的保障。     

地图中铁路、道路提取和恢复显示的方法

本文提出一种从军用地图中提取铁路、道路的半自动方法和自动恢复显示其在地图中标识方式的算法,从而进一步实现地图图形显示系统的多层次结构。     

氧化镧中放射性的去除——Ⅳ.P_(507)-HNO_3体系萃取法去除氧化镧中放射性的扩大试验

本文给出了在P_(507)-HNO_3体系中去除氧化镧中放射性的工艺流程及用混合澄清槽作为萃取设备,在上海跃龙化工厂完成的扩大试验结果。试验表明:α放射性、铁和钙的去污系数都大于1000,镧的回收率大于96％,产品中α放射性小于1计数/h,Fe_2O_3<5ppm,CaO<50ppm,达到了荧光级氧化镧的要求。该流程操作简便、设备简单、稳定性好,可以应用于工业生产。