基于有限元法的石油射孔枪弹间干扰研究

石油射孔弹顺序起爆后,弹间冲击波相互作用是一个高度非线性的力学过程。基于有限元法对这一过程进行显式动力分析,由计算结果得知,高孔密射孔枪弹间干扰产生的主要原因是下位弹在不对称的压力场起爆。设计的不同孔密和不同爆速的导爆索两种情形的爆轰试验结果表明,弹间间距越小(即孔密的增加),弹间干扰越严重;随着导爆索爆速的降低,下位弹射流头部质量集中的"中间"偏转角度增大,上位弹对其干扰越明显。以上结论可用于高孔密射孔枪的优化设计。     

基于哈希锁定的网络传输异常序列监测仿真

为有效提升传统网络传输异常序列监测方法的处理效率,提出基于哈希锁定的网络传输异常序列监测方法。利用随机投影的哈希函数将高维空间数据转换为低维空间数据,并利用网络传输序列的多元数量值函数,组建网络传输结构模型。对网络传输结构模型进行流量时频采样以及时间序列分析,结合FIR滤波器对其进行流量抗干扰处理,通过高阶累计的振荡衰减,对输出的滤波数据进行特征搜索及提取,实现基于哈希锁定的网络传输异常序列监测。仿真结果表明,所提方法具有较强的抗干扰性,并且能够确保网络的稳定运行。     

Functional response of adult Cheyletus malaccensis (Acari: Cheyletidae) to different developmental stages of Aleuroglyphus ovatus (Acari: Acaridae)

Cheyletus malaccensis is an important natural enemy of stored pests. In the study, the functional response of C. malaccensis against Aleuroglyphus ovatus was investigated under five constant temperatures of 16, 20, 24, 28 and 32 °C. The results showed that the functional response of adult C. malaccensis to different stages of A. ovatus was conformed to Holling II. Under the temperature between 16 and 32 °C, C. malaccensis females consumed more larvae and nymphs, followed by male and females of A. ovatus. While male C. malaccensis merely consumed larvae and nymphs of prey. Adult C. malaccensis ate few eggs of A. ovatus. The daily consumption and instantaneous attack rate (a/Th) increased with the temperature increasing from 16 °C to 32 °C while the peak was at 28 °C. The maximum daily consumption for larva and a/Th of female C. malaccensis are 135.1 and 110.7, respectively. Cheyletus malaccensis showed positive preference to larvae and nymphs, while negative preference to adults and eggs of A. ovatus. Because of the competition and interference among predators, the predation efficiency decreased with the density of predator increasing, and the interference coefficient (m) was 0.485 at 28 °C. These results could be helpful to provide theoretical basis and practical instructions for the biological control of A. ovatus by C. malaccensis.     

Synergistic effect of polyindole decoration on bismuth neodymium ferrite powder for achieving wideband microwave absorber

Recently, composite materials with outstanding absorption properties, like extraordinary absorbing capability, light weight, and thin in size, are required to solve the challenges of electromagnetic pollution. In addition, most of the work is based on the optimization of absorber material structure, and microstructure. In the current work, we improved the reflection loss feature of Bi_0.5Nd_0.5FeO₃ nanopowders via decoration with polyindole polymer by tuning the filler loading of the nanocomposite in the matrix. XRD, UV–Vis, XPS, and FESEM were used to determine the physicochemical features of the as-prepared nanocomposite. The minimum RL was lowered further with the increasing filler loading at 25 wt%. The lower RL of ?22 dB was noticed for 2.2 mm thickness at 11.5 GHz. The maximum value of the SE_R for a 25 wt% sample was 5.5, whereas 19 dB and 24.5 dB values were recorded for SE_A and SET, respectively. The resonance peak above 11.5 GHz demonstrated the better outcome of the absorber at high frequency. Good impedance matching characteristics, conductive features, dielectrics, and magnetic losses were all credited with the excellent reflection loss and electromagnetic interference shielding efficiency. The as-prepared nanocomposite materials that have been proven are interesting prospects for electromagnetic reflection loss and interference shielding that is lightweight, flexible, and extremely effective.     

Arsenic-sulfides confound anion exchange resin speciation of aqueous arsenic

A field-portable anion exchange resin method (often cited as the Ficklin method (1983)) has been extensively used to distinguish between dissolved arsenite (As(III)) and arsenate (As(V)) species in natural waters. As(III) occurs largely as As(OH)(3), which is uncharged at ca. pH 7, while As(V) is negatively charged and will sorb to the resin. However, we show that negatively charged As(III)-sulfide (thioarsenite) species, important at sulfide concentrations >10 microM, also bind to the anion exchange resins, and therefore might be interpreted incorrectly as As(V). Furthermore, we show that nitrogen-purging, which results in a conversion of As(III)-sulfides to arsenite, can be used to obtain accurate arsenic speciation when resins are used on sulfidic water samples.     

刀具半径补偿的干涉预判及数学处理

数控铣削编程时,编程人员往往通过不断增大刀补值调用子程序实现去余量编程。这种方法在轮廓的曲率半径很大时可行,而在轮廓存在较小的曲率半径时,系统会产生刀具半径太大而干涉的报警,从而终止程序的运行。为了解决此问题,给出方便调用的子程序编写范例。分析刀补过程中可能发生干涉的情况,提出刀补干涉的预判及数学处理方法,给出应用宏程序建立刀补干涉预判机制的思路和流程,并给出编程实例。该方法有效解决了困扰编程人员的工程技术难题。     

The emission characteristics and interference analysis of Power Line Telecommunication

This paper describes characteristics of PLT emission with experiment in semi-anechoic chamber and suggests the method for aggregating multiple interferences based on probabilistic approach in the situation in which multiple PLT modems are operating in close proximity to the radio receiver. The levels of the conducted and radiated emission and the APD characteristics are presented. And compatibility between PLT and radio receiver is analyzed with suggested method. This will be useful for assessing interference effect in the field of radio communication and electromagnetic compatibility.     

Resonance self-shielding calculation using subgroup method and ABC algorithm

In this study, we propose a new method to optimize subgroup parameters for resonance self-shielding calculation. Our approach integrates the merits of both the subgroup method and ABC optimization technique to effectively evaluate self-shielded resonance cross-sections. The ABC algorithm is used to obtain subgroup level in a way that guarantees reproduction of shielded effective cross sections in the subgroup formulation. The temperature dependency of the cross-section is included in both subgroup level and subgroup weight. We used the conjugate gradient method based on the normal equations (CGNR) to evaluate the subgroup weights. An iteration technique is also used to consider the resonance interference. The proposed method is verified by analyzing Rowlands benchmark problems and Mosteller benchmark problems and comparing the obtained results with corresponding Monte Carlo solutions. The multiplication factor results show small errors and also good agreement.     

Analysis of Frequency,Intensity, and Interference of Discomfort in Computerized Numeric Control Machine Operations

The introduction of Computerized Numeric Control (CNC) technology in manufacturing industries revolutionized the production process a few decades back. There are some health and safety problems associated with these machine operations, however. The main objectives of the present work is to study the health and safety issues associated with the CNC machines with respect to control and display, specifically to determine the frequency, intensity of discomfort, and its interference in operating different CNC machines as reported by the workers operating them. The postural discomfort associated with CNC machines was studied, and the frequency, intensity of discomfort, and interference of the level of discomfort with the participants' ability to work were recorded and analyzed. The study revealed that 20.5% of the operators reported discomfort 1 or 2 times, 25.4% experienced discomfort 3 to 4 times in a week, 37.7% had discomfort daily, and 16.4% reported discomfort several times a day. Discomfort was reported in all the body parts involved (lower back, neck, upper back, shoulder, and leg), but the highest discomfort scores were associated with the shoulder and arm region. Workers reporting discomfort several times a day also reported high mean discomfort scores. The study established that the frequency and intensity of the discomfort in all body parts is related to the position of the control panel and display. © 2012 Wiley Periodicals, Inc.     

电加热实现过盈配合的工艺改进

介绍一种投资少、简单实用、低耗清洁、适合多部位和不同部件使用的小型加热盘——电加热工艺法。解决了形状特异、大而重的金属件加热处理后,在热胀冷缩状态下,满足过盈配合的需要。通过工艺改进与传统方法对比、分析,阐述了在机械制造领域中的应用效果。