Torsional statics of two-dimensionally functionally graded microtubes

A size-dependent governing equation is derived to investigate the torsional static behaviors of two-dimensionally functionally graded microtubes based on the modified couple stress theory. The shear modulus is assumed to vary along the tube’s length direction according to an exponential distribute function, and varies along the tube’s radius direction according to a power-law function. A generalized differential quadrature method is developed to determine the rotational angle and shear stresses. Some illustrative examples are given to investigate the effects of applied torques, the length scale parameter and various material compositions on the torsional angle and shear stresses.     

基于时空的弱点状运动目标检测技术

如何在复杂背景下持续有效地检测目标位置,一直是研究者们需要面对的主要挑战。本文在研究红外点状移动目标特征的基础上,根据目标无纹理,无形状的特性,提出一种改进的形态学目标增强算法,并利用目标连续时空不变性检测目标。首先,建立多尺度的图像金字塔,在每层上采用改进的形态学算法快速、粗糙定位小目标。然后进一步的根据目标在时空上的位置相关性,提出基于目标运动特征分析的精确检测方法。得到精确稳定的检测结果。最后实验结果表明与经典的形态学检测算法及其他算法相比,该技术能更有效地检测弱小目标,具有更高的鲁棒性。     

基于关键路径延时检测的自适应电压缩减技术

为了减小传统的最差情况设计方法引入的电压裕量,提出了一种变化可知的自适应电压缩减(AVS)技术,通过调整电源电压来降低电路功耗.自适应电压缩减技术基于检测关键路径的延时变化,基于此设计了一款预错误原位延时检测电路,可以检测关键路径延时并输出预错误信号,进而控制单元可根据反馈回的预错误信号的个数调整系统电压.本芯片采用SMIC180 nm工艺设计验证,仿真分析表明,采用自适应电压缩减技术后,4个目标验证电路分别节省功耗12.4％,11.3％,10.4％和11.6％.     

聚焦平台光束大气传输光束扩展的定标参数分析

建议采用63.2%环围能量半径及其内平均功率密度描述激光器大气传输光斑扩展特性.通过利用数值模拟及实验观测相结合的方法,对聚焦平台光束大气传输线性效应及湍流热晕相互作用引起的光束扩展进行了大量的数值模拟及部分实验研究,建立了描述聚焦平台光束大气传输光束扩展与大气传输特征物理参量的定标关系,从而为激光工程应用的可行性及系统参量的优化设计提供依据.     

弱碱三元复合驱与强碱三元复合驱的对比

三元复合驱即将成为大庆油田的主导开发技术,为了推荐出合适的三元复合驱类型,对比研究了弱碱三元复合驱与强碱三元复合驱。研究表明,弱碱三元复合驱可以比水驱提高采收率20%以上,与强碱三元复合驱相当;弱碱三元复合驱与强碱三元复合驱乳化液粘度都超过100 mPa.s,两种类型三元复合乳化能力相差不多,甚至弱碱三元复合驱乳化能力还略强一些;在注采能力、采油速度方面,弱碱三元复合驱甚至高于强碱三元复合驱;特别是在结垢程度上,弱碱三元复合驱比强碱三元复合驱弱,对生产井的影响较小。因此,在三元复合驱推广应用时应当选用弱碱三元复合驱。     

烟机结垢的成因分析及防范措施

通过对烟机垢物的元素和晶体组成进行表征，分析其形成条件，计算验证并探讨垢物的形成过程，并提出应对防范措施。烟机结垢过程为：极少数原料油滴在反应汽化段内未完全汽化，未汽化油黏附在催化剂细粉表面并缩合生焦；部分焦炭颗粒未在再生器内烧尽，进入烟道后继续燃烧达到细粉的熔融温度，转化为液相黏性物质；携带微量高温熔融粉尘的烟气在三级旋风分离器下料口、烟机叶片等部位受高速离心作用，黏附到易结垢部位，形成无定形垢物。可通过提升原料油喷嘴雾化效果，调整合适的剂油比和系统细粉含量来减少烟机结垢。     

固体热容激光器的设计和功率标定

固体热容激光器（SSHCL）作为下一代最佳候选高功率激光器，引起人们广泛关注。介绍了固体热容激光器工作原理、光抽运期间介质板内荧光分布和温度分布、介质板冷却以及功率标定。详细讨论了激光介质温度对激光输出功率的影响，对有关设计要点也作了相关分析。     

输油管线防垢防腐及新药剂试验

讨论影响输油管线结垢和腐蚀的主要因素，从理论上分析了结垢形成，推导计算结垢量的公式。介绍了输油管线防止硫酸钡垢的清防方法。     

Fish assemblages and stream hydraulics: consistent relations across spatial scales and regions

General relationships between organisms and their habitat, consistent across spatial scales and regions, suggest the existence of repeatable ecological processes and are useful for the management of stream networks. From published data, we defined four guilds of European fish species with contrasting preferences for microhabitat hydraulics within stream reaches. At the scale of stream reaches and across 139 French sites (590 460 fishes sampled), we analysed how fish guild proportions were related to reach hydraulics (proportion of pools vs. riffles %POOL; median discharge by unit width Q50/W). The strongest correlations were observed between two fish guilds and %POOL (p < 0.001, r² ≥ 0.41) and between one fish guild proportion and Q50/W (p < 0.001, r² = 0.10). These reach–scale relationships were consistent across six large French basins, and consistent with the analyses made at the microhabitat scale. Therefore, microhabitat preferences for hydraulics are strong enough to generate consistent reach‐scale community responses to hydraulics across regions, despite the influence of other filters such as temperature, nutrient levels or history. The distribution of basic geomorphic features (pools, riffles) in streams and their modification (by dams, weirs and dikes) can modify the proportion of fish guilds by up to 80%, probably contributing to the long‐term decline of riffle‐dwelling species in Europe. Copyright © 2006 John Wiley & Sons, Ltd.