Microscopic Methods for Identification of Sulfate-Reducing Bacteria from Various Habitats

This paper is devoted to microscopic methods for the identification of sulfate-reducing bacteria (SRB). In this context, it describes various habitats, morphology and techniques used for the detection and identification of this very heterogeneous group of anaerobic microorganisms. SRB are present in almost every habitat on Earth, including freshwater and marine water, soils, sediments or animals. In the oil, water and gas industries, they can cause considerable economic losses due to their hydrogen sulfide production; in periodontal lesions and the colon of humans, they can cause health complications. Although the role of these bacteria in inflammatory bowel diseases is not entirely known yet, their presence is increased in patients and produced hydrogen sulfide has a cytotoxic effect. For these reasons, methods for the detection of these microorganisms were described. Apart from selected molecular techniques, including metagenomics, fluorescence microscopy was one of the applied methods. Especially fluorescence in situ hybridization (FISH) in various modifications was described. This method enables visual identification of SRB, determining their abundance and spatial distribution in environmental biofilms and gut samples.     

Energy analysis of the system of two-stage anaerobic processing of liquid organic waste with production of hydrogen- and methane-containing biogases

In recent years, public attention has been increasingly attracted to solving two inextricably linked problems - preventing the depletion of natural resources and protecting the environment from anthropogenic pollution. The annual consumption of livestock waste for biogas production is about 240 thousand m³ per year, which is 0.17% of the total manure produced at Russian agricultural enterprises. At present, the actual use of organic waste potentially suitable for biogas production is 2–3 orders of magnitude lower than the existing potential for organic waste. Currently, hydrogen energy is gaining immense popularity in the world due to the problem of depletion of non-renewable energy sources - hydrocarbons, and environmental pollution caused by their increasing consumption. Of particular interest is the dark process of producing hydrogen-containing biogas in the processing of organic waste under anaerobic conditions, which allows you to take advantage of both energy production and solving the problem of organic waste disposal. An energy analysis of a two-stage anaerobic liquid organic waste processing system with the production of hydrogen- and methane-containing biogases based on experimental data obtained in a laboratory plant with increased volume reactors was performed. The energy efficiency of the system is in the range of 1.91–2.74. Maximum energy efficiency was observed with a hydraulic retention time of 2.5 days in a dark fermentation reactor. The cost of electricity to produce 1 m³ of hydrogen was 1.093 kW·h with a hydraulic retention time of 2.5 days in the dark fermentation reactor. When the hydraulic retention time in the dark fermentation reactor was 1 day, the specific (in ratio to the processing rate of organic waste) energy costs to produce of 1 m³ of hydrogen were minimal in the considered hrt range, and amounted to 26 (W/m³ of hydrogen)/(m³ of waste/day). Thus, the system of two-stage anaerobic processing of liquid organic waste to produce hydrogen and methane-containing biogases is an energy-efficient way to both produce hydrogen and process organic waste.     

磁絮凝强化技术处理厌氧消化污泥脱水液

为满足后续生物处理单元对固体悬浮物（SS）和铁浓度的进水要求，采用磁絮凝强化技术对厌氧消化污泥脱水液进行预处理。通过正交试验和单因素试验，本文考察了混凝水力条件、聚合氯化铝（PAC）投加量、聚丙烯酰胺（PAM）投加量、磁粉投加量及药剂投加顺序对磁絮凝效果的影响。试验结果表明：磁絮凝强化技术在快搅300r/min（2min）、慢搅100r/min（15min）、静置10min时，依次投加磁粉（40mg/L）、PAC（30mg/L）、PAM（4mg/L）时处理效果最好。在此运行条件下，SS和Fe³⁺去除率分别为97.61%、98.24%、絮凝指数（FI值）取得最大值、zeta电位绝对值最小，絮凝效果最佳。与对照相比，磁絮凝强化技术对SS和Fe³⁺去除率分别可提高3.70%和10.82%，同时絮体最大沉降速度可提高33%。磁絮凝技术处理后的出水不仅可以满足后续生物处理单元对SS和铁浓度的要求，还可以有效提高磁絮凝体的沉降速度，减小沉淀时间，具有较好的实用价值。     

短程反硝化耦合厌氧氨氧化工艺及其应用前景研究进展

短程反硝化以其碳源消耗量、废污泥产量、温室气体排量极低及无需曝气等优势，被认为是最具研究潜势的厌氧氨氧化底物供给技术，成为近年来研究热点。本文首先介绍了短程反硝化工艺原理；其次从污泥源、反应时间、碳源类型、碳源量及pH等5个方面总结了影响短程反硝化工艺启动因素；随后综述了短程反硝化耦合厌氧氨氧化工艺的重要研究进展，同时指出了耦合工艺实验研究与工程应用的不足，并提出了解决实验与工程应用缺陷的方案；最后展望了耦合工艺处理城市污水和工业硝酸盐废水的可行性及应用前景，认为全面分析工业硝酸盐废水化学组分与基于分子生物学水平的宏基因组学测序、元转录组学技术是未来耦合工艺同步处理城市污水和工业硝酸盐废水的研究重点。     

基于LabVIEW的甲烷产气量自动测量系统设计

针对实验室现有的厌氧发酵装置产气测量存在费时费力、人眼读数误差较大、自动化程度低等问题,设计一种基于LabVIEW的甲烷产气量自动测量系统。提出采用排水法与称重计量法结合的测量方法,以实现产气量自动测量。称重传感器获取发酵甲烷产气排水后得到水的质量,经换算得到排水体积即甲烷产气体积。利用LabVIEW编写软件平台,采用NI USB-6251数据采集卡对发酵过程中的关键参数如甲烷产气量、温度和pH值进行实时采集、处理、显示及存储,同时控制夹管阀和蠕动泵实现自动补充排水液的功能。利用微量注射器对自动测量系统开展性能验证实验。试验结果表明:该装置的测量平均相对误差最大值为1.10%。该系统可以满足发酵实验对甲烷气体的测量需求,不仅能够提高自动化水平还可以提高测量准确性。