压水堆核电厂堆外源量程探测器计数率分析

压水堆核电厂启动过程中，次级中子源为堆外源量程探测器提供本底计数率，避免测量盲区，确保反应堆安全启动。但次级中子源的引入会为核电厂带来较大的经济和环境负担，同时也需承受次级中子源破损等带来的风险。为此，可使用受辐照燃料组件的自发裂变中子源进行替代，即无源启动方式。通过研究堆外源量程探测器计数率的理论计算方法，并基于运行电厂测量数据进行分析验证，为源量程探测器计数率的理论预估提供了较为完善的理论方法流程。本文结果可为无源启动源量程探测器计数率分析提供支持，同时也可用于次级中子源装载量或布置位置的优化分析等。     

A review on some classes of algebraic systems

ABSTRACT

In this paper, we review some algebraic control system. Precisely, linear and bilinear systems on Euclidean spaces and invariant and linear systems on Lie groups. The fourth classes of systems have a common issue: to any class, there exists an associated subgroup. From this object, we survey the controllability property. Especially, from those coming from our contribution to the theory.     

无油润滑压缩机活塞环和支承环设计

通过对填充聚四氟乙烯材料活塞环及带卸荷槽结构支承环的研究 ,确定了活塞及活塞环结构 ,建立了带卸荷槽支承环的力学分析模型 ,并将其结果用于结构尺寸的确定。在压缩机工艺指标不变的情况下 ,用该方法设计的活塞环和支承环性能优良。     

无掩模激光干涉光刻技术研究

介绍了一种不用掩模的光刻技术———激光干涉光刻技术的基本原理,给出了干涉光刻技术的主要特点及一些可能的应用,并对实验系统和初步实验结果进行了分析。研究表明,激光干涉光刻具有大视场和分辨率高和视场宽等优点。     

Influence of Edible Films upon the Moisture Loss and Microstructure of Dietetic Sucrose-Free Sponge Cakes during Storage

The kinetics of changes in the bound water content in dietetic sucrose-free sponge cakes (DC) during storage was investigated. The effect of edible films of polymyxan, pectin, xanthan, and carboxymethylcellulose upon this kinetics was also investigated. The quantitative changes in both states of water (slightly bound water and strongly bound water) were registered by combined dynamic analysis (thermogravimetry analysis, TGA, and differential thermal analysis, DTA). The moisture changes in DC crumb were analyzed by drying out to constant mass. The rate constants were determined according the equation q = q_oe^-kt. The values of rate constants 'k', in day^-1, concerning the different edible films were as follows: for crumb moisture is (8.00 ≤ k ≤ 12.47) × 10^-3, for bound water is (3.07 ≤ k_w ≤ 6.26) × 10^-2, for slightly bound water is (4.22 ≤ k₁ ≤ 8.49) × 10^-2 and for strongly bound water is (2.02 ≤ k₂ ≤ 5.62) × 10^-2 as compared to 18.53 × 10^-3, 7.16 × 10^-2, 9.04 × 10^-2, and 5.36 × 10^-2 in the uncovered DC, respectively. The best water-retaining effect in respect to crumb moisture during storage was ascertained in the use of polymyxan and xanthan films. The lowest rate constant values for bound water and its two states were measured for DC covered with pectin. The relation between the kinetics of both bound water states during storage and ageing of the crumb of DC covered with different edible films and the crumb microstructure was represented. By means of scanning electron microscope was read the smallest change in crumb microstructure of pectin-covered DC on the sixth day of storage.     

提高超小型铝电解电容器生产一次合格率

恰当选择原材料、确保铆接工序质量、重视工作电解液的配比、严控各工序成品率是提高超小型铝电解电容器投入产出一次合格率的关键。以１０Ｖ－４７μＦ（４ｍｍ×７ｍｍ）产品为例，投入产出一次合格率达９４％以上。     

On the stability preserving property of the double bilinear transformation on a class of 2-D transfer functions

This paper addresses the BIBO (bounded-input bounded-output) stability of a class of discrete 2-D quarter-plane filters in the presence of nonessential singularities of the second kind (NSSK's) on the unit bidisk. Conditions under which the double bilinear transformation (DBT) preserves stability are derived. The results presented here also extend the class of systems whose stability can be predicted. Use of the inverse DBT to produce a continuous equivalent of the discrete 2-D transfer function allows easy application of a continuous-domain equivalent of a criterion developed by Dautov. The necessary and sufficient condition for stability derived in this work provides a simple check for the class of systems under consideration. From this class of systems, it is also possible to construct stable pairs of mutually inverse transfer functions.     

免棱镜全站仪检测建筑缺陷

本文介绍免棱镜全站仪及免棱镜测距原理,结合一个实例阐述工程应用——检测建筑缺陷。最后对其它应用和需要注意的问题作了简要说明。     

无粘结预应力蛋形消化池的施工技术

石家庄市桥东污水处理厂有6座11500m3无粘结预应力混凝土蛋形消化池,本文介绍其非预应力钢筋、模板体系、混凝土和预应力工程等结构施工成套技术。     

开放的ladder型无反转激光系统的稳定性分析

利用开放的ladder型无反转激光系统的密度矩阵运动方程组的定态解和激光场运动方程分析了系统的稳定性。结果表明：如果增益大于激光腔损耗，则零解是不稳定的；如果增益小于激光腔损耗，则零解是稳定的；如果增益大于激光腔损耗，则非零解是稳定的。