野外大气扩散试验中四面体气球示踪实验的初步评价

1985年11月在瑞士北部进行了一次以探讨“冷池”条件下的扩散和湍流特征为目的的国际野外大气试验,本文介绍其中的四面体气球示踪实验的结果。一共进行了三次由雷达跟踪的四面体示踪实验,释放了10个四面体球。按多轨迹法和单轨迹法分别估算并比较了其中两次示踪实验得到的水平扩散参数σ_y,探讨了风摆效应的贡献。采用“体源模式”并结合单轨迹法估算了微弱风场不定风向条件下的扩散参数,分析了静风,弱风条件下的水平风向标准差和湍流强度。     

浅议斜坡稳定性计算中水压力的作用

理论推导证明了静水压力模式与动水压力模式下地下水作用效果的差异,并且结合前人的研究成果,提出要取得合理的稳定性计算结果,两种水压力模式下所选用的强度参数应有所区分,对于静水压力模式,应取快剪或不排水剪指标;对于动水压力模式,则应取用慢剪或排水剪指标。最后采用一个具体的工程实例验证了结论的合理性。     

高能超声处理Al-1Si合金凝固组织分析

采用高能超声处理Al-1Si合金熔体,借助金相显微镜和电子探针进行组织分析,并测定合金的熔化潜热,分析了熔体中超声空化效应和声流效应影响凝固过程的机理。结果表明,试样晶粒平均尺寸由超声处理前的94μm减小到超声处理后的34μm;合金试样的熔化吸热量由263.90J/g降低为159.81J/g,在熔体中施加高能超声显著改善了合金成分的均匀性并细化了晶粒。     

i－line光刻高均匀照明系统光能分布的计算模拟

叙述了ｉ－ｌｉｎｅ光刻高均匀照明系统的均匀照明原理，以及其具有特殊面形（非球面）、特殊结构（非共轴）、超光学表面（由多个非共轴光学表面组成）的光学系统的光能分布计算模拟的原理、方法。作为例子，用所编写的程序计算模拟了我们近来设计的一曝光系统几个重要光学表面上具有权重的点列图和光能分布曲线。     

Approximation algorithms for minimizing segments in radiation therapy

Intensity modulated radiation therapy (IMRT) is one of the most effective modalities for modern cancer treatment. The key to successful IMRT treatment hinges on the delivery of a two-dimensional discrete radiation intensity matrix using a device called a multileaf collimator (MLC). Mathematically, the delivery of an intensity matrix using an MLC can be viewed as the problem of representing a non-negative integral matrix (i.e., the intensity matrix) by a linear combination of certain special non-negative integral matrices called segments, where each such segment corresponds to one of the allowed states of the MLC. The problem of representing the intensity matrix with the minimum number of segments is known to be NP-complete. In this paper, we present two approximation algorithms for this matrix representation problem. To the best of our knowledge, these are the first algorithms to achieve non-trivial performance guarantees for multi-row intensity matrices.     

水冷水口内钢液凝固前沿的模拟计算研究

为了降低钢液的过热度,设计了一种水冷水口,使它能够应用在实际生产中.根据模拟计算结果发现,在拉速一定的条件下,过热度和冷却强度对钢液的凝固前沿有着显著的影响.应用此水冷水口有合适的过热度和冷却强度.     

Aligning principal and agent’s incentives: A principal–agent perspective of social networking sites

The viability of networked communities depends on the creation and disclosure of user-generated content and the frequency of user visitation (Facebook 10-K Annual Report, 2012). However, little is known about how to align the interests of user and social networking sites. In this study, we draw upon the principal-agent perspective to extend Pavlou et al.’s uncertainty mitigation model of online exchange relationships (2007) and propose an empirically tested model for aligning the incentives of the principal (user) and the agent (service provider). As suggested by Pavlou et al., we incorporated a multi-dimensional measure of trust: trust of provider and trust of members. The proposed model is empirically tested with survey data from 305 adults aged 20-55. The results support our model, delineating how real individuals with bounded rationality actually make decision about information disclosure under uncertainty in the social networking site context. There is show little to no relationship between online privacy concerns and information disclosure on online social network sites. Perceived benefits provide the linkage between the incentives of principal (user) and agent (provider) while usage intensity demonstrated the most significant impact on information disclosure. We argue that the phenomenon may be explained through Communication Privacy Management Theory. The present study enhances our understanding of agency theory and human judgment theory in the context of social media. Practical implications for understanding and facilitating online social exchange relationships are also discussed.     

火灾混凝土结构损伤检测技术进展

分析火灾混凝土损伤特征以及传统火灾混凝土损伤检测方法的特点和局限性。介绍近年发展起来的火灾混凝土损伤检测新技术，包括颜色分析、损伤深度检测、红外热像法、热发光法和电化学法。系统地总结和评价这几种新技术的基本原理、优点和使用范围，并指出了该领域今后的发展方向。     

The Effect of Intensity Pulsed Ion Beam Irradiation on Wear Resistance of High-speed Steel

INTENSITY pulsed ion beam(IPIB)technology hasbeen developed over the last two decades primarily fornuclear fusion and high-energy density physicsresearch,which is also named as high-intensity pulsedion beam technology(HPIB)and becomes a newmodification technique of materials surface such as inthe fields of metal materials modification,functionalfilms and nano-powder synthesis[1-5].Directdeposition of a beam into a solid surface results in arapid melt and resolidification with heating and…     

高强度锌铝合金齿轮挤压铸造成形

介绍了用挤压铸造技术制造高强度锌铝合金齿轮特别是有防爆、阻燃要求的齿轮的方法。挤压铸造高强度锌铝合金齿轮模具结构、制造工艺简便可靠，生产成本低，经济效益高。