USB总线接口芯片CH371及其应用

CH371是一种新型USB通用总线接口芯片。利用该芯片可在不了解任何USB协议或固件程序甚至驱动程序的情况下，轻松地将并口或串口产品升级到USB接口。文中介绍了该接口芯片的主要特点和引脚功能，给出了CH371与其它总线进行接口的几种应用电路，同时给出了CH371与MCS-51单片机的接口程序。     

Comparison of six methylation methods for analysis of the fatty acid composition of albacore lipid

Six methods widely used to produce methyl esters for the gas chromatographic determination of the fatty acid composition of a marine lipid were compared. Four acid-catalyzed methods (1% H₂SO₄: CH₃OH; 5% HCl: CH₃OH; 7% and 14% BF₃: CH₃OH) and two base-catalyzed methods [0.5M NaOCH₃: CH₃OH; (1:4) tetramethylguanidine: CH₃OH] were used.
The use of BF₃: CH₃OH (7% and 14%) gave a lower content of 18:1 n9 than the other methods and produced an artefact (2.7–3.2% of total fatty acid content) eluting between the 20:5 and 24:1 fatty acid methyl esters. No significant differences were obtained between the other four methods.
Accordingly the use of BF₃: CH₃OH for transmethylation of marine lipids is not recommended. Results obtained in the other four methods showed that all are comparable.     

基于CH365型接口和MCX314As型运动控制器的PCI总线运动控制卡设计

以CH365型PCI总线接口和MCX314As型运动控制器为核心硬件,自主研发了基于运动控制器的PCI总线运动控制卡,该控制卡能够实现4轴位置、速度和S曲线的加减速控制,具有直线、圆弧、位模式插补功能及自动原位搜寻功能,同时具有4路信号输入和8路通用输出.     

Exploring the methods on improving CH4 delivery performance to surpass the Advanced Research Project Ageney-Energy target

CH_4 storage associated with adsorbed natural gas(ANG) technology is an issue attracting great concern.Following the Advanced Research Project Agency-Energy(ARPA-E) targeted deliverable capacity of 315 cm~3·cm~(-3)(STP), hundreds of thousands of materials have been experimentally or theoretically evaluated,while the best results still show a 35% gap from the target. Moreover, recent theoretical research reveals that the target is beyond the possibility that real materials can be designed. To get rid of the awkward situation, we make attempts on investigating the CH_4 delivery performance under other operation conditions. Methods of raising the discharge temperature(to infinite high) or elevating the storage pressure(to 25 MPa) have been proved to show limited effectiveness. In this work, it is found that the ARPA-E target can be achieved by using a decreasing storage temperature strategy. By taking 280 Co RE(computation-ready, experimental) COFs(covalent organic frameworks) as ANG materials, when reduce the storage temperature to 190.6 K, the highest deliverable capacity can reach 392 cm~3·cm~(-3)(STP), and16.1% Co RE COFs can surpass the target. The target is also achievable when storage at 220 K. Structure performance relationships study shows strong correlation between deliverable capacity and void fraction. Hence, 120 hypothetical COFs are generated to ascertain the optimum void fraction. In addition,the performance of 2 D-COFs can be greatly enhanced by increasing the interlayer spacings, e.g. CH_4 deliverable capacity(storage at 190.6 K) of ATFG-COF can be improved from 239 to 411 cm~3·cm~(-3)(STP) when interlayer spacing is enlarged to 1.65 nm.     

Mg、Ce修饰纳米Al_2O_3负载Ni催化剂对CH_4、CO_2重整反应制合成气的影响

考察了助剂Mg、Ce修饰的纳米A l2O3负载N i催化剂对CH4、CO2重整反应制合成气的反应性能影响,采用正交实验筛选催化剂。结果表明,N i含量在9%~13%时,催化剂表现出较好的活性;随Mg含量的增加,反应活性基本呈下降趋势,说明Mg降低了催化剂体系的反应性能;Ce的加入总体上提高了反应活性,但是当Ce含量为3%时,反应活性最好;从不经预还原实验和低温点反应实验推断出,CH4和CO2重整反应中关键反应步骤是CH4的裂解;助剂Ce有利于提高催化剂的稳定性,而Mg却会使催化剂的稳定性下降很快。     

CH4-CaSO4和H2S-Fe2O3反应体系的热力学和动力学研究

The destruction of hydrocarbon in deep carbonate diagenetic environment is one of problems on the formation of oil and gas. Organic-inorganic reactions in the process of TSR(Thermochemical Sulfate Reduction) are the main reason to make disappearance of the hydrocarbons. The work in this field has often been the subject of much research work in recent years. In this paper, the thermodynamics of CH4-CaSO4 and H2S-Fe2O3 systems is discussed to investigate the possibility of reactions. It is found that these two reactions can proceed spontaneously.Increasing temperature is favorite for CH4-CaSO4 system but disfavorite for H2S-Fe2O3 system. Thermal simulation experiments were carried out using autoclave at high temperature and high pressure. The properties of the products were characterized by microcoulometry, FT-IR and XRD methods. On the basis of the experimental data, a reaction kinetic model is developed and kinetic parameters are determined.     

非光气路线合成特种异氰酸酯PPDI前体——对苯二氨基甲酸甲酯

以绿色化学品碳酸二甲酯和对苯二胺为原料,采用非光气路线合成对苯二氨基甲酸甲酯(PPDC)——聚氨酯用特种异氰酸酯对苯二异氰酸酯(PPDI)的前体。实验考察了催化剂对反应的影响,并以Zn(CH3COO)2作催化剂确定了合适工艺条件。结果表明,Zn(CH3COO)2为催化剂,433.15K反应2h,对苯二胺转化率为99.9%,PPDC的收率可达82.1%。对该反应的机理进行了初步的探讨。     

Mechanistic peculiarities of the N2O reduction by CH4 over Fe-silicalite

Transient isotopic studies in the temporal analysis of products (TAP) reactor evidenced the importance of the lifetime of oxygen species generated upon N₂O decomposition on extraframework iron sites of Fe-silicalite for methane oxidation at 723 K. Fe-silicalite effectively activates CH₄ when N₂O and CH₄ are pulsed together in the reactor. However, these oxygen species gradually become inactive for methane oxidation as the time delay between the N₂O and CH₄ pulses is increased from 0 to 2 s.     

La对CH_4-CO_2重整反应催化剂性能的影响

采用等体积浸渍法制备了Ni/γ-Al2O3和Ni/La2O3-γ-Al2O3系列催化剂,通过固定床反应、热重分析等方法,考察了催化剂的性能。结果表明：Ni质量分数为10%的Ni/γ-Al2O3催化剂具有较高的活性;稀土元素La的加入,提高了催化剂的抗积炭性能;在相同的反应条件下,10%Ni/3%La2O3-γ-Al2O3催化剂的积炭量比10%Ni/γ-Al2O3催化剂积炭量降低了40%,稳定性大大提高。以Ni/La2O3-γ-Al2O3催化剂中Ni质量分数10%,并且La质量分数3%为最佳,实验条件下制得的合成气CO/H2接近1/1。